Maintenance Scripts not running

Purchased a mac mini a few days ago. Noticed in my system log: Recent contents: that it doesn't seem to be running the overnight maintenance. It reads:
Nov 20. 03: 15: 02 - geoff powells computer: mac - mini. cp: error processing extended attributes. Operation not permitted.
This is updated daily with the same result. Mini is left running 24/7.
Phoned Apple Tech Support who said their G4s syslogs said the same.
But couldn't say if the scripts were running or not.
Anyone any clues.
The sys log of my G5 running 10.3.8 shows a restart everyday.

Hi Geoff,
Welcome to Discussions!
Your system works perfectly well and the Periodic maintenance runs.
- That a system log starts precisely at 3:15 shows alone that your computer is left on all night and the Daily script runs at its default scheduled time.
--> Open Console again and see the three Periodic maintenance logs. They are daily.out, monthly.out and weekly.out.
If your computer never sleeps, you should find that they were run at 3:15am every day (daily task), 3:15am on Saturdays (weekly task), and 5:30am on the first day of each month (monthly task).
Note that since 10.4.2 they are able to run "delayed" in case your computer was sleeping during the night. This enhancement works perfectly well with the Daily Task, but not very reliably with the Weekly and the Monthly.
Still no running at all if computer shut down at night.
HTH
Axl

Similar Messages

Firefox is taking a long time to open. When it does open, I get a pop up box with "Script not running". Bookmarks on my tool bar don't load. Scrolling is unreliable--it will stop in the middle of a page

What is causing the "script not running"? Why so long to open? Etc.

Hi Donekes,
First off I need a little more information to help with troubleshooting. You say that an error occurs when you "try to re-open the same problem app before the old session completely exits". Does the error have an error code or dialog display? It may also be possible to receive an error log. Here is a knowledge base that explains how to retrieve error logs.
http://digital.ni.com/public.nsf/websearch/54E361E3FF477EC186256C320068184F?OpenDocument
If you are able to get that information then please post. Have a good day.
Brian K.

Maintenance scripts - not in Leopard?

Are the daily, weekly and monthly maintenance scripts still around in Leopard. If so they do not seem to be running.

David: afraid I'm no expert with Automator, but I do know that you can run Terminal commands from Automator. Check with the folks who know what they're doing in the Automaor forum:
http://discussions.apple.com/forum.jspa?forumID=749
Or you can go to VersionTracker and see which of the many utilities that will do this for you sounds good to you. Personally, I just use Terminal whenever it occurs to me.
Andrew: it sounds like either something is amiss with the sudoers file, or else you are not a member of the admin group. I would suspect the latter, since it is known that the Leopard install sometimes results in the loss of the admin status for a user. To see if you are a member of the admin group, try the id command. Here's what I get:
NoobiX:~ francine$ id
uid=501(francine) gid=20(staff) groups=20(staff),102(com.apple.sharepoint.group.2),98(_lpadmin),101(com.apple.s harepoint.group.1),80(admin),501(francine)
As you can see, I am a member of admin (group 80). If you have lost your admin status, see this Apple KB article:
http://docs.info.apple.com/article.html?artnum=306876
It's easy to fix if you have a second user who was also an admin, and that user has retained their status. In that case you can just log in to the remaining admin account, go to System Prefs-Accounts, and click the box to enable admin rights to your regular account.
Francine
Francine
Schwieder

VB startup script not running on Win7

Hi,
my startup VB script not working on Windows 7. The script should install or uninstall office 2010 based on group membership.
I tested scipt on Windows XP and everything works. When I run script manually, it works.
Quite similiar batch file works, office are installed but not same functionality for me.
I turn UAC off, bot not working.. Also add dword EnableLinkedConnections but nothing change.
Batch file works but VBScript not!
Any advice? Thx

Hi Tomas Cink,
Based on my understanding, the start VB script which is deployed via GPO could not works fine on Windows 7 clients, although it can works fine on Windows XP clients and it can
run sucessfully if manually. Right?
Firstly, please run the following command on the problematic workstation.
Gpresult /h > C:\temp\gpresult.html (“C:\temp\” is the path of the gpresult.html, you can set it by yourself)
This file is used for checking the result of Group Policy information. Open the file to check if the GPO has applied.
If the GPO has applied, please follow the following step to narrow down the issue:
Change the script to the following command: add > %SystemDrive%\Users\test.txt
to the script.
Log on to a client with a regular user account, run
gpupdate/force, and then re-log on to this client.
Check if the test.txt file exists in this location
%SystemDrive%\Users.
If the
test.txt file exists, the GPO with startup script is applied successfully. But the result of running logon script achieves the goal we excepted or not which is still not sure.
Regards,
Lany Zhang

Server side script not running on stand-alone XE

Hello,
In my application I created a Server side script (AJAX) which presents a select-list based on other fields on the page. The very same application runs on a 10g+APEX3.0.1 database AND on a standard XE+APEX2.1 database, which are both accessed via a HTTP-server. The application with the script runs fine on this platform (XP).
I have two other XP-machines on which I also installed XE+APEX2.1. Both are stand-alone versions NOT accessed via a HTTP-server. I installed exactly the same application which runs on the platform with HTTP server on both of the machines. While testing the correct functioning, I noticed that everything works ok, EXCEPT the server side script which gives me a better select list. Instead of this I get the old-fashioned version of the select-list which is not able to use the value elsewhere on the page.
I found a similar problem on the XE forum (Re: Server side scripts features ) but it doesn't answer my question how to get the script working on a standalone version of XE (= without access via a HTTP-server).
Can anybody please help me?
Thanks & regards,
Jan.
Message was edited by: Jan
J. Hulsing

Carl,
Thanks for your suggestion to install FireFox and the Firebug tool (which I wasn't aware of).
After having looked at the problem for hours, I found what I think is the problem: the htmldb_html_elements.js script.
As already mentioned, the properly functioning XE on my local PC is accessed via a HTTP-server, as well as the 10gR2+APEX3.0.1 version also running on that PC.
On the laptop, not running HTTP-server, I get the message: 
$x is not defined 
 f_21_select_kpn(input#P21_GBREKNR 405, "P21_KOSTENPOST") 
onblur(blur )
 
That is in the 'Console' of Firebug.
When changing to Script I do see a remarkable difference.
On the PC there the following text is found in the first lines of htmldb_html_elements.js:
/*htmld_elements will contain the lower level html access js*/ 
var gDebug = true; 
var gkeyPressTime; 
var gLastTab=false; 
var gRegex=false; 
var ie=(document.all)?true:false; 
if(ie){document.expando=true;} 
var gDebugWindow = false; 
/* 
$x functions have to do with either single elements or array of elements 
$v functions have to have to do with manipulating values or interaction based off a value 
$xml function have to do with manipulating xml values 
$a functions are based on ajax 
$d functions are specific dhtml constructs 
*/ 
/* begin $x functions */ 
function $x(pNd){ 
try{ 
var node; 
... 
On the laptop however the first few lines are: 
/*htmld_elements will contain the lower level html access js*/ 
 
var gDebug = true; 
var gkeyPressTime; 
var gLastTab=false; 
var gRegex=false; 
if(document.all){document.expando = true;} 
// Elements // 
 
function html_GetElement(pNd){ 
try{ 
var node; 
switch(typeof (pNd)){ 
... 
I think that the difference is in these two scripts.
But why are the scripts different: it is the same XE that is installed on the laptop and the PC. The answer I found in the images/javascript directory of APEX3.0.1 which is located in the APACHE directory-tree (you have to copy the images to APACHE when you use the HTTP-server). And indeed: the htmldb_html_elements.js has exactly the same text as what I see in Firebug on the PC. So XE on the PC is using the javascripts in the image-directory of APACHE on the PC and not the XE-version of the scripts, embedded in XE.
 
So the answer seems to be: copy the APEX3.0.1 versions of the script over to the PC and try to get them into the database. Or...???
 
Can it be loaded into the database? Will XE accept it?
 
Would be nice to have answers if the conclusion I found is the right one and if it can be fixed by loading the js into XE.
 
Best regards and thanks for your help so far.
 
Jan.

GPO Startup/Shutdown scripts not running

I am running server 2003 SBS with windows 8.1 Pro workstations.
My workstations run 1 start-up script and 2 shutdown scripts. All are BAT files.
They were all working fine last week before I ran the update for 8.1.1, now they do not run at the appropriate time on any of those systems. However, if I execute them manually they work as expected.
I have checked to see if the BAT files are still located in the GPO and they are there. They are stored locally on each machine, I have even tried to delete and re-add them and then run GPUPDATE to no avail.
Any help here would be great, as they deal with local encrypted containers and are specific to each workstation.

Hi Sebastian,
Thanks for posting.
Whether the GPO with start-up/shutdown scripts are linked to the OU containing computers?
FYI - Logon/Logoff scripts could only be applied to users, whereas Start-up/Shutdown scripts applies to computers.
Also, checkout the below thread on similar discussion,
http://social.technet.microsoft.com/Forums/windowsserver/en-US/b193e8a9-9b2a-4993-bd74-836c65c51dc3/gpo-with-a-startup-script-is-not-working
Regards,
Gopi
www.jijitechnologies.com

WMI Scripts not Running Across VPN

Hi
I have a strange problem where i have 2 sites connected using a VPN on 2 CISCO877. But WMI scripts are not running across the link. if i pull these out an replace them with a Draytek, the scripts run fine.
Broad Lane LAN ----- Cisco 877 ========= Internet & VPN Tunnel ============== Cisco 877 ---- Southam LAN1.0.39.0/8 1.0.39.253 192.168.55.1 192.168.55.0/24 The server at Broad Lane is GIMILI (1.0.39.109) and at Southam is FRODO (192.168.55.4). The following will not work through the tunnel from Broad Lane LAN. Set objWMIService = GetObject("winmgmts:\\192.168.55.4\root\cimv2") if err.number=0 then serverexist=true else serverexist=falsemsgbox(server.exist)
Is is possible for the CISCO877 to block WMI traffic?
Any suggestions please?
Rgds
Phil

Phil,
Thank you for your question. This community is for Cisco Small Business products and your question is in reference to a Cisco Elite/Classic product. Please post your question in the Cisco NetPro forums located here: http://forums.cisco.com/eforum/servlet/NetProf?page=main This forum has subject matter experts on Cisco Elite/Classic products that may be able to answer your question.
Bill

Powershell script not running in the task scheduler...

I've created a .ps1 script to transfer a file using WinSCP can run it in the ISE environment, in the PS window, and with the run command. I've transferred the command I used in the run prompt to the task scheduler but it is not running. It is running everywhere
else just not in the scheduler. It says that it completes okay and gives a return code of OpCode=2
The action is set to run this: c:\Windows\System32\WindowsPowerShell\v1.0\Powershell.exe
The Arguments: -ExecutionPolicy Bypass -file "C:\Users\me\scriptsWCP\FileTransferPS.ps1"
Also have it running with the highest permission and as SYSTEM

Hi,
To run a powershell script with parameters in the Task Scheduler:
Program: C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe
Add argument (optional): -Command "& c:\scripts\test.ps1 -par1 2 -par2 3"
Hope the below two articles be helpful for you:
Schedule PowerShell Scripts that Require Input Values
https://blogs.technet.com/b/heyscriptingguy/archive/2011/01/12/schedule-powershell-scripts-that-require-input-values.aspx
How to Schedule a PowerShell Script
http://dmitrysotnikov.wordpress.com/2011/02/03/how-to-schedule-a-powershell-script/
Regards,
Yan Li
Regards, Yan Li

Saproot.sh script not running

Hi All
1)I upgraded kernel 700 to patch 185.its solaris machine.and then i tried to run saproot.sh script,but it is saying like
./saproot.sh SID
./saproot.sh: whoami: not found
./saproot.sh: test: argument expected
i gave full permission to saproot.sh and saposcol
2)I run a command 'cleanipc 00 remove' from then it is giving dump 'PXA_NO_SHARED_MEMORY'
i increased buffersize also but of no use.
when i go to st06 it is giving err 'SAPOSCOL not running?(shared memory not available)'
manually itried to run saposcol but it is saying no shared memory.
appreciate the responses.
Thank you

>
Santosh Kulkarni wrote:
> Hi All
>
> 1)I upgraded kernel 700 to patch 185.its solaris machine.and then i tried to run saproot.sh script,but it is saying like
>
> # ./saproot.sh SID
> ./saproot.sh: whoami: not found
> ./saproot.sh: test: argument expected
>
./saproot.sh SID needs to be execute from root user
> i gave full permission to saproot.sh and saposcol
>
> 2)I run a command 'cleanipc 00 remove' from then it is giving dump 'PXA_NO_SHARED_MEMORY'
> i increased buffersize also but of no use.
> when i go to st06 it is giving err 'SAPOSCOL not running?(shared memory not available)'
> manually itried to run saposcol but it is saying no shared memory.
>
> appreciate the responses.
>
> Thank you
Check this link
http://help.sap.com/saphelp_bw30b/helpdata/en/95/df4002597211d3b473006094b910d9/content.htm
http://www.saptechies.com/os-collector-saposcol/
Regards,
Subhash

Gpo computer startup scripts not running

Hi,
I´m making some test with a windows 7 pro 64 bit computer and a 2008 r2 domain controller where I have created a computer startup script. I give you more info:
Domain functional level: 2008 R2
DC: 2008 R2
Client: Windows 7 pro x64
Gpo: Computer configuration -> Windows configuration -> Script -> Startup
Type of script: bat file copied on \\domain_name\SysVol\domain_name\Policies\{461E688A-E8F8-4C9B-8419-FE83DCDD4C26}\Machine\Scripts\Startup
The windows 7 machine is full updated, windows firewall disabled, uac disabled, windows defender disabled.
The bat file works and the gpo is applying, i have seen it via gpresult, another gpo which is in a top level works fine.
I need some help please, because I don´t know what to try.
Thanks in advance.

Hello Egoitz28,
Do you mean that you add the bat file in the startup group policy and gpresult shows that it is applied, but the bat is not run?
Please share us the bat file to test.
Logon/Logoff scripts could only be applied to users, whereas Start-up/Shutdown scripts applies to computers.
I create a test.bat start %windir%\system32\notepad.exe, and add it to the User Configuration->Policies->windows Settings->Scripts->Logon in the Default domain policy. And it works.
If I create in the startup policy in Computer configuration, I can see it in the gpresult, but it doesn’t work.
Please test if the bat works in the Logon policy.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

WLST script not running in CRON...

i have written a WLST scrit to connect to WLS and find the DS driver Information ....the script runs pretty good when i manulay run it ...however when i added the script to CRON it just invokes WLST and fails...I have the shell script (.sh) first set the env by invokin <WLS-HOME>/server/bin/setWLSEnv and then execute the WLST script....like i said everything is fine when run manually but the cron job fails......
when i chek the log file for the output i just see this
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
but when run manually its connecting....
There is no ownership issue as such coz other cron jobs with the same owner run succesfully....!!!
Please advise......
Thanks in advance....
Edited by: user10620079 on Feb 6, 2009 11:42 AM

Thnaks for all your replies....
I actually just made this change ...
instead of setWLSEnv...i invoked setDomainEnv.sh and then cd to the dir where i have the .py script and the rest as it is and now it works...!!!!!!
This tells me that may be setWLSEnv doesnt set all the required env variables for the .py script to run in cron....correct me if am still doing something wrong!!!!
Thanks all for your help really appreciate it!!!!
Edited by: user10620079 on Mar 16, 2009 1:20 PM

Maintenance scripts never run?/using terminal

Hi everyone! I am a very new Mac user and am finding at times it to be completely daunting.
So my question/problem is this: I shut down my computer nightly, and from what I have researched, it does not perform maintenance. I did a Terminal command to find when my script last ran and received this:
ls: /var/log/*.out: No such file or directory
Does this mean the scripts have never run? Can I change the default times these are executed?
I also went into the launchdaemons folder and it is empty. Does that mean anything?
I could really used a dumb down version of any answers, I have never used a Mac before I bought one, and actually just learned of the Terminal program today. I have been to The X Lab and read through that site, and searched the forum here.
Sorry for all the questions, I am so confused and terrified of damaging this computer.
Thank you in advance!

Welcome To  Discussions irach!
Here is some additional info.
As Kappy posted, if you turn the Mac off nightly, the Background Maintenance Tasks, are never run.
These can also be run, using a Third-Party utility, or manually using Terminal, to run the CRON Commands.
I use MacJanitor, when necessary.
INSTRUCTIONS TO RUN CRON MANUAL COMMANDS
Quit all applications/programs.
Navigate to HD > Applications > Utilities.
Double click on Terminal, to open.
At the prompt, type:
sudo periodic daily
Press Return.
Enter your Admin password when prompted, then press Return.
This will execute the daily script that is sheduled to run every night.
When completed, repeat this procedure, but change the command to:
sudo periodic weekly
This one rebuilds a database or two, and usually takes somewhat longer to complete. It is scheduled to run once a week.
Repeat again, with command:
sudo periodic monthly
Or they can all be run in one pass, which is preferable, with this command:
sudo periodic daily weekly monthly
When the tasks complete, and return to the prompt, you may quit Terminal.
Restart the Mac, and run Repair Permissions.
TO REPAIR PERMISSIONS ON THE STARTUP DISK
1.Open Disk Utility, located in Applications/Utilities, and select the startup disk in the left column.
2.Click First Aid.
3.Click Verify Disk Permissions to test permissions or Repair Disk Permissions to test and repair permissions. (I never "Verify". Just run "Repair".)
Rerun RP, until the only messages reported, are listed here Spurious Permissions Errors Using: 10.4.x, authored by Michael Conniff.
When "Repair Permissions" is complete. Quit "Disk Utility".
ali b

Portal Transport Set(EXPORT) script not running.

Hi,
I have created a Instant portal(10 Appli Rel 2) which is on OS
[SUSE LINUX Enterprise Server 9 (i586) VERSION = 9 ] .
Now I want to create transport set and want to export that instant portal to another
SUSE LINUX server.
But the problem I am facing is that the script that is generating by the EXPORT WIZARD is
for UNIX which has .CSH extension.
So i am not able to rum that thing...as Linux use .SH .....can anyone help me to run that thing .......
Thanx

DId you run the script to put the trasnport set ready for been include?
When you create a transport set, automaticaly you can get the dmp from it, but when you import it, you need to run the script that willmake a import in db level so you can import it in the portal, is like making two imports, one at portal, one at command line using the script, and you run it like script.cmd -mode import -s portalschema -c orcl -pu orcladmin -d filename.dmp where -mode indicate that is going to be an import, -c db SID name, -pu Portal User -d File created during export and -s db schema for portal.
Hope this helps.
Greetings

OpenVPN - up/down scripts not run correctly

Hi,
I have a OpenVPN client on my computer which connects to a remote server at startup (launched by systemd). The connection i primarily used to set up a network drive. To make this process as smooth as possible I'm trying to mount with an up script and unmount with an down script. This is my config:
client
dev tun
proto udp
remote site.xxx 1194
resolv-retry infinite
nobind
persist-key
persist-tun
ca site.crt
cert site.crt
key site.key
comp-lzo
verb 3
reneg-sec 0
script-security 3
route-up /etc/openvpn/up.sh
route-pre-down /etc/openvpn/down.sh
(last two lines)
In theory, up.sh should execute when the connection is initialized and the routes are in place. And down.sh should run when the connection is still active just before the routes are removed. This seems to be the case in the log:
Sat Mar 22 08:37:50 2014 OpenVPN 2.3.2 x86_64-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [EPOLL] [eurephia] [MH] [IPv6] built on Nov 13 2013
Sat Mar 22 08:37:50 2014 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
Sat Mar 22 08:37:50 2014 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Sat Mar 22 08:37:50 2014 WARNING: file 'site.key' is group or others accessible
Sat Mar 22 08:37:50 2014 Socket Buffers: R=[212992->131072] S=[212992->131072]
Sat Mar 22 08:37:50 2014 UDPv4 link local: [undef]
Sat Mar 22 08:37:50 2014 UDPv4 link remote: [AF_INET]xxx:1194
Sat Mar 22 08:37:50 2014 TLS: Initial packet from [AF_INET]xxx:1194, sid=cc55bb26 51a6f522
Sat Mar 22 08:37:50 2014 VERIFY OK: depth=1, C=SE, ST=Stockholm, L=Stockholm, O=xxx, CN=xxx CA, emailAddress=xxx
Sat Mar 22 08:37:50 2014 VERIFY OK: depth=0, C=SE, ST=Stockholm, L=Stockholm, O=xxx, CN=xxx, emailAddress=xxx
Sat Mar 22 08:37:50 2014 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key
Sat Mar 22 08:37:50 2014 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Sat Mar 22 08:37:50 2014 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key
Sat Mar 22 08:37:50 2014 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Sat Mar 22 08:37:50 2014 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA
Sat Mar 22 08:37:50 2014 [xxx] Peer Connection Initiated with [AF_INET]xxx:1194
Sat Mar 22 08:37:52 2014 SENT CONTROL [xxx]: 'PUSH_REQUEST' (status=1)
Sat Mar 22 08:37:52 2014 PUSH: Received control message: 'PUSH_REPLY,route xxx 255.255.255.0,route xxx 255.255.255.0,topology net30,ping 10,ping-restart 120,ifconfig xxx xxx'
Sat Mar 22 08:37:52 2014 OPTIONS IMPORT: timers and/or timeouts modified
Sat Mar 22 08:37:52 2014 OPTIONS IMPORT: --ifconfig/up options modified
Sat Mar 22 08:37:52 2014 OPTIONS IMPORT: route options modified
Sat Mar 22 08:37:52 2014 ROUTE_GATEWAY 192.168.0.1/255.255.255.0 IFACE=eth0 HWADDR=ec:a8:6b:ff:de:31
Sat Mar 22 08:37:52 2014 TUN/TAP device tun0 opened
Sat Mar 22 08:37:52 2014 TUN/TAP TX queue length set to 100
Sat Mar 22 08:37:52 2014 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Sat Mar 22 08:37:52 2014 /usr/bin/ip link set dev tun0 up mtu 1500
Sat Mar 22 08:37:52 2014 /usr/bin/ip addr add dev tun0 local xxxpeer xxx
Sat Mar 22 08:37:52 2014 /usr/bin/ip route add xxx via xxx
Sat Mar 22 08:37:52 2014 /usr/bin/ip route add xxx via xxx
Mounting network drives...
mount error(115): Operation now in progress
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)
mount error(115): Operation now in progress
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)
Sat Mar 22 08:38:12 2014 Initialization Sequence Completed
^CSat Mar 22 08:38:18 2014 event_wait : Interrupted system call (code=4)
Sat Mar 22 08:38:18 2014 /etc/openvpn/down.sh tun0 1500 1542 xxx xxx init
Unmounting network drives...
Sat Mar 22 08:40:22 2014 /usr/bin/ip route del xxx
Sat Mar 22 08:40:22 2014 /usr/bin/ip route del xxx
Sat Mar 22 08:40:22 2014 Closing TUN/TAP interface
Sat Mar 22 08:40:22 2014 /usr/bin/ip addr del dev tun0 local xxx peer xxx
Sat Mar 22 08:40:22 2014 SIGINT[hard,] received, process exiting
But here's the problem. The up script will not mount because it doesn't seem to be able to reach the network. The routes ARE there (checked via netstat -rn in the up script) but it will not work. It works perfectly if I run the script maually diretly after OpenVPN is done. And the down script (which unmounts the drives) just hangs because the connections seems to be interrupted.
So, how can make it work so that mount and umount is handled by OpenVPN? Am i missing something?

Managed to get around the problem using systemd:
[Unit]
Description=OpenVPN connection to %i
[Service]
Type=forking
ExecStart=/usr/bin/openvpn --cd /etc/openvpn --config /etc/openvpn/%i.conf --daemon openvpn@%i
ExecStartPost=/root/scripts/mount.sh
ExecStop=/root/scripts/umount.sh
[Install]
WantedBy=multi-user.target
...but I think it's cleaner to do it in the openVPN config, so I still like some help there :-)
Last edited by twarkie (2014-03-22 15:37:49)

EEM script not running in WS-C4900M switch

Hello,
I am having two WS-C4900M switches which were giving high cpu spikes hence we have configured EEM script in it to capture switch behaviour during cpu spikes.when CPU goes high script do get hit but the commands under script doesn't run and we are not able fecth command outputs during high cpu.
Pleas find script uploaded and show version of switch attached.

I don't think you need a script for this. An applet should work just fine. This kind of thing is commonly done by TAC to aid in data collection for transient problems. This policy should work provided the CPU instance is correct. A 7600 will have at least two CPUs. This applet assumes CPU instance 1 is the desired CPU, but it may be CPU instance 2 you need to monitor.
event manager applet watch-cpu event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.11.1 get-type exact entry-op ge entry-val 90 exit-op lt exit-val 90 poll-interval 60 maxrun 300 action 1.0 cli command "enable" action 1.1 cli command "term exec promp time" action 2.0 cli command "show tech | append disk0:/high_cpu.txt" action 3.0 cli command "sh ip bgp vpnv4 vrf VRF10102 neighbors | append disk0:/high_cpu.txt" action 4.0 cli command "sh bgp vpnv4 unicast vrf VRF10102 summary | append disk0:/high_cpu.txt" action 5.0 cli command "sh ip bgp vpnv4 vrf VRF10102 neighbors x.x.x.x advertised-routes | append disk0:/high_cpu.txt" action 6.0 cli command "sh ip bgp vpnv4 vrf VRF10102 neighbors x.x.x.x received-routes | append disk0:/high_cpu.txt" action 7.0 cli command "sh isis neighbors detail | append disk0:/high_cpu.txt" action 8.0 cli command "show logg | append disk0:/high_cpu.txt"

Maintenance Scripts not running

Similar Messages

Maybe you are looking for