Maintenance Transaction - Status was reset by system

Hi,
I started the "Maintenance Transaction" under <Change Management - Maintenance Optimizer>
None others transaction was found. I did <Create New Maintenance Transaction>, then I gave the poroduct version and next with <continue>
II got a warning message Status was reset by system and There is already a transaction for the systems of this product version, after them the process stoped.
I checked with <SLG1>, but I detected no importing messages.
Regards
Richard

Hi,
check this [maintenance optimizer problem|maintenance optimizer problem]
Might be helpful.
Thanks,
Jansi

Similar Messages

  • For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

    For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
    We are getting below error.
    The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
    COuld anyone please help us to know, How it can be resolved?
    We also have this below error.
    System Response
    If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
    If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
    Procedure
    The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
    Procedure for System Administration
    Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
    Additional Information:
    System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
    No authorization to log on as a trusted system (Tr usted RC=0).
    /TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
    For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

    If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
    Hope this helps.
    Thanks!
    Jhero

  • No System selectable in Maintenance Transaction for SolMan 7.0 itself

    Hello,
    I would like to update Solution Manager 7.0 SPS17 (SAPKITL427) to EHP1 with a "Maintenance Transaction". But in Basic Settings, when I choose Solution Manager 7.0, the System and Logical Component (which is configured) aren't displayed. So in the next Step, the Button "Find Download files" under "Calculate Download files automatically" is greyed out.
    When I start a MOPZ for the connected ERP 6.0, the productive System (but Q and Dev not) and the configured Logical Component are selectable, and the Button works.
    So, I checked the SMSY-Configuration for SolMan and the ERP P-System, and cannot find a difference. And I think, that the QAS- and DEV-System should be visible too?
    Does anyone has an idea, what I have to check, to get the SolMan-System/Logical Component (and the QAS and DEV) in MOPZ?
    Thank you very much
    Regards
    Rudolf

    Thank you very much Waaseem,
    Solution was Note 1247550 (as "Sub-Note" of 1122966): All system are now visible (SolMan, QAS and DEV)
    When I now go to the second step I can choose "Maintenance" and select afer pressing "Find Download files" SPS till 21.
    But:
    For the ERP System I can choose "Enhancement Package Installation". As SPS 21 for Solution Manager is correspondig to EHP1, I think, I should see the choice  "Enhancement Package Installation" for the solution Manager, too?
    Is this correct? And, if not, should I solve it, to be able to install EHP1?
    Thanks and regards
    Rudolf

  • My daughtrts ipad 2 only recognises headphones. and the internal speaker will not work. we have reset the system  three times, cleaned out the headphone jack, and  chrckrd the side switch above the volume. alos we ensured it was not in do not disturb mode

    On our ipad the speaker has quit working. Sound is only heard when you have head phones plugged in. We have reset the system three times cleaned out the headphone jack. Changed languages and rest but nothing works. This ipad is important to our daughter it is her tool to communicate with us and now it is not working please help

    You've done well with troubleshooting so far. Next step would be to back up and then restore from iTunes. Good luck!

  • Why has Firefox 16.0.2 under Windows 7 started to give "connection was reset" error only when accessing Yahoo Tech Goups, except first access of the day?

    On first access of the day to Yahoo technical groups, I can always retrieve the opening screen, but get no further. Almost all subsequent accesses in that day to Yahoo tech groups using this computer return a "connection was reset error", although I have very occasionally seen a successful access. Rebooting the computer makes no difference. No other websites that I visit give this problem.
    I am running Windows7 (auto updates) and Firefox 16.0.2. This is a problem that started about 3 weeks ago, possibly directly after a Windows7, Adobe Reader or a Firefox update. I have tried clearing all cookies and the cache in Firefox. The problem is not seen on other computers running different operating system versions or different browsers that are accessing the Yahoo site through the same internet gateway.

    Thanks again for your suggestions and links. I have gone through those, and am sorry to say I am not really any further forward. I have also gone systematically through the yahoo cookies, deleting one at a time. The only one that makes any difference is the T cookie, which must retain the login status as deleting it forces a login at the next access. After a login I get up to about a minute of Yahoo tech group activity before the "connection was reset" error pervades. All the Yahoo cookies are back in place when this happens. Using Private Browsing makes no difference to this behaviour.

  • Maintenance transaction error

    Hello experts!
    I'm trying to create a maintenance transaction in my solution manager for my enterprise portal system (based on netweaver 7.3)
    *The system was registered automatically in SLD  at installation
    *In SMSY I have this structure
    Product Systems
    --->SAP Netweaver AS JAVA
    >EPP
    >Application Server JAVA
    In EPP component I have in Product Instante Selection
    Application Server Java marked as relevant and technical system too
    The techincal system is called EPP and the system type is JAVA
    But when I choose calculate files automatically in MOPZ I get this message
    "No Component Version data for system EPP ! "
    Where should I configure that version data?
    Thank you

    Hi,
    When you go to SMSY, system EPP, and click on one of the Java product
    instances in the navigation pane at the left, you see the data for the
    Java technical system EPP.
    Please check if there is any tab software component information for this
    Java technical system , and if there is such a tab, if the software
    components have any values.
    I strongly recommend this documentation below.
    http://service.sap.com/solutionmanager => Media Library => How-To
    Documents => #SAP Solution Manager in a High Security Infrastructure
    thanks
    Regards,
    Vikram

  • No Maintenance Cycle is open for current system

    Hi Experts,
    We are facing a peculiar problem in ChaRM implementation.
    We have successfully created the maintenance cycle .But when we try to create change transaction & get it approved then it is showing an error : " No Maintenance cycle is open for current system".
    We have checked all the configuration like STMS & system landscape too. All are working fine.
    Any help will be appreciated.
    Pooja Mittal.

    Hi,
    you might have different reasons why it is not working
    1 check the status of the tasklist (or cycle) and of your project (service desk document) (via SOLAR_PROJECT_ADMIN)
    2. check your authorisation for project
    3. check the subject code of the change request (Implementation or Maintenance project ?) check
    CRMD_ORDER on your change request
    4. check the type of project you have activated (should match the above subject code) via SOLAR_PROJECT_ADMIN
    5. check the target system of your change request : it should be a  productive environment
    I hope it helps
    br Xavier

  • The connection to the server was reset while the p...

    For the past week i keep getting the below error page every minute or so--->
    "The connection to the server was reset while the page was loading.
      The site could be temporarily unavailable or too busy. Try again in a few
        moments.
      If you are unable to load any pages, check your computer's network
        connection.
      If your computer or network is protected by a firewall or proxy, make sure
        that Firefox is permitted to access the Web."
    When i refresh the page it usually goes through as normal or does it again and needs to refresh again. Seems like every 1-2 mins i get a period of 15-20 secs of this.
    Is this the connection droppping or another error altogether??  If its not actually the connection dropping will this affect gaming online (xbox 360, Battlefield 3)?
    I believe Infinity is rolling out in my village (ST8  7__) (Biddulph Moor) next month. Could this be the reason?  Its not the sites/pages im visiting as its happening no matter what site i visit.
    I have done the quiet line test (17070) and thats fine.  My hub details and speedtest is below. As far as i know we connected to the master socket.
    Any advice will be greatly appreciated
    I cant do the btspeedtest as the bill payer is away so i cant find out the Serice ID.  I have done a test on speedtest.net if thAt is any good
    [URL=http://www.speedtest.net][IMG]http://www.speedtest.net/result/1862765754.png[/IMG][/URL]
    ADSL line status Connection information
    Line state
    Connected
    Connection time
    2 days, 15:46:50
    Downstream
    2,643 Kbps
    Upstream
    1,031 Kbps
    ADSL settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    ITU-T G.992.5
    Latency type
    Interleaved
    Noise margin (Down/Up)
    10.1 dB / 5.3 dB
    Line attenuation (Down/Up)
    55.5 dB / 35.1 dB
    Output power (Down/Up)
    0.0 dBm / 12.8 dBm
    Loss of Framing (Local)
    0
    Loss of Signal (Local)
    0
    Loss of Power (Local)
    0
    FEC Errors (Down/Up)
    0 / 13
    CRC Errors (Down/Up)
    3101 / N/A
    HEC Errors (Down/Up)
    N/A / 11
    Error Seconds (Local)
    1281

    I dont believe so no. And the speed isnt an issue for me. I live in a village in the sticks so never had over 2.5mb. The issue is the error i get all the time. Ive had problems in the past where my connection would drop and i would have to wait to connect again before continuing. That was along time ago. This seems a different error. And is instantly fixed a refresh.
    So if my connection doesnt actually drop will this affect online gaming?
    Could this error be due to infinity coming to my area next month?
    The reasn its an issue for me at the moment is because im a memeber of a few survey sites where i get paid to take surveys. This error causes me so much trouble. I i click a survey and this error occurs then i lose that survey.... so its actually preventing me from making money :-(
    I think we will be getting infinity at the end of april. But if this isnt anything to do with inifinty and is actually a problem with my line then im concerned this will continue.
    Since i heard a week or so ago inifinity was rolling out in my village in april this problem seems to have started. So im guessing its due to infinty.
    Could it be? and when infinity is running in my village could this problem cease?

  • Getting error while creating maintenance transaction in tcode DSWP

    I am getting below error when I am creating new maintenance transaction in solution manager tcode DSWP and selecting option automatically select files
    Transaction must be assigned to a Standalone Product Version
    When I am choosing the option select manually ,it is working fine.
    please guide me from here
    Thanks,
    Kunal Gahlot

    Hi Sri,
              The product version is maintianed correctly under SCM 7.0 EHP1.
              We are getting EWA reports regularly for the system SCM 7.0 EHP1 which we have installed.
              The only problem we are facing is in automatic selection of files in the maintenance transaction.
    Regards,
    Kunal Gahlot

  • I keep getting a "connection was reset error" before step 1 can finish.

    I signed up for iTunes match today but everytime I try to match my library it gets to the very end of step 1 and I get this error message "We could not complete your iTunes store request. The network connection was reset. Make sure your network connection is active and try again. " My connection is fine, I tried restarting iTunes and my computer to no avail. Any suggestions?

    Just wanted to document my own issues -- started getting this about a week back (Verizion FIOS user).  One system I was getting the connection reset as mentioned here, and another I was getting no errors but some downloads were showing up as either cut off or completely blank.  This was for downloads btw and not the actual Matching process.
    I made two changes to these systems (both Windows 7):
    1- Turned off iP6 (since I don't even use it right now)
    2- Changed the DNS servers to something other than the FIOS defaults.
    So far this has corrected the problem on both systems.  The DNS suggestion I found from a search so that seems to have fixed both systems.  Woot!

  • Error message we could not complete your itunes store request. The network connection was reset. Make sure your network connection is active

    Can Anyone help with this message which occurs when I am trying to update my iMatch, it says "gathering information about your library" & then after a few mins when the progress band gets almost to the end, I get the message "we could not complete your itunes store request. The network connection was reset. Make sure your network connection is active & try again"
    Support has told me that its a problem with my connection, but I disagree, how come I can download countless songs from iTunes without ever getting this message, I think they are bullsh***g me to get rid of me.
    I have even followed their advice & totally disabled all my antivirus, adwatch & firewall software & it still does it.
    Can anyone help with this

    Hi mate, well I really dont know why but last night it started to work out of the blue, you might want to check yours again as they may have fixed a bug??
    I did absoultely nothing different yesterday to make it start working, I had previously disabled all my antivirus, firewall, anti tracker etc etc & it didnt sort it.
    The only thing that happened yesterday was my laptop went dead flat & I had to a reboot (dont choose System Resume, which I normally do) I chose the other option in error & had to wait nearly an hour whilst my PC "repaired files etc" & it also downloaded a load of updates (had that message "dont power off, as updates are in progress")
    I really dont know if that sorted the issue or Apple fixed the bug yesterday but its working.
    Good luck

  • Caused by: javax.transaction.xa.XAException: com.microsoft.sqlserver.jdbc.SQLServerException: The function START: has failed. No transaction cookie was returned

    Hello guys,
    I have been setting a production system with bitronix transaction manager, SQL server 2008, XA transactions and jetty 6. In the beginning this software was configured to run with MySQL. But one of my customer decided to move everything to MSSQL server 2008.
    In that moment I was trying to get this up and running for some weeks (The configuration was completely different) and finally I got it.
    The configuration with MSSQL server was running perfectly during 1 month but then from one day to other the error message I will show now appeared and I do not how to solve it. I almost read all the hints from google about this exception but nothing helped
    me out.
    I hope you guys can help me to find a way to solve it.
    - I tried different version of the jdbc driver 3.0 and 4.0.
    - I tried to export exactly the database to my localserver and it's running perfectly with the same configuration.
    The problem is that I cannot reproduce the error in other place that is not the customer and at the same time I have no access to their internal database server. They installed all the XA transaction stuff (dll in binn, enable XA, and grant the permissions
    for SQLXAUser), I am quite sure because it was running for one month without any problem.
    I asked to the customer if anything happenend on their server (microsoft updates, machines reboot, ...) but nothing of these happened.
    Also I tried this link out but did not help me.
    <a href="http://social.msdn.microsoft.com/Forums/sqlserver/en-US/15c1e6f5-ec1e-4376-8f45-25e61ffc1306/the-function-start-has-failed-no-transaction-cookie-was-returned?forum=sqldataaccess">http://social.msdn.microsoft.com/Forums/sqlserver/en-US/15c1e6f5-ec1e-4376-8f45-25e61ffc1306/the-function-start-has-failed-no-transaction-cookie-was-returned?forum=sqldataaccess</a>
    The exception is the following:
     [2014-05-15 14:06:08,842] INFO  3666[main] - org.mortbay.log.Slf4jLog.info(Slf4jLog.java:67) - Starting Bitronix Transaction Manager
    [2014-05-15 14:06:08,951] INFO  3775[main] - org.mortbay.log.Slf4jLog.info(Slf4jLog.java:67) - Extract ./webapps/myscript-fpp-wrapper-server.war to D:\Temp\Jetty_0_0_0_0_8080_myscript.fpp.wrapper.server.war__myscript.form.wrapper.server__.bnwnn7\webapp
    [2014-05-15 14:06:10,324] INFO  5148[main] - org.mortbay.log.Slf4jLog.info(Slf4jLog.java:67) - NO JSP Support for /myscript-form-wrapper-server, did not find org.apache.jasper.servlet.JspServlet
    [2014-05-15 14:06:12,742] WARN  7566[main] - org.dozer.config.GlobalSettings.loadGlobalSettings(GlobalSettings.java:118) - Dozer configuration file not found: dozer.properties.  Using defaults for all Dozer global properties.
    [2014-05-15 14:06:13,288] WARN  8112[main] - org.hibernate.util.JDBCExceptionReporter.logExceptions(JDBCExceptionReporter.java:100) - SQL Error: 0, SQLState: null
    [2014-05-15 14:06:13,288]ERROR  8112[main] - org.hibernate.util.JDBCExceptionReporter.logExceptions(JDBCExceptionReporter.java:101) - error enlisting a JdbcConnectionHandle of a JdbcPooledConnection from datasource fppDataSource in state ACCESSIBLE with
    usage count 1 wrapping SQLServerXAConnection:1 on  ProxyConnectionID:1
    [2014-05-15 14:06:13,319]ERROR  8143[main] - org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:220) - Context initialization failed
    org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'moduleRegistration' defined in class path resource [com/visionobjects/myscript/fpp/wrapper/module-registration.xml]: Invocation of init method failed; nested exception is
    org.hibernate.exception.GenericJDBCException: could not execute query
        at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1420)
        at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:519)
        at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:456)
        at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:291)
        at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
        at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:288)
        at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:190)
        at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:580)
        at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:895)
        at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:425)
        at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:276)
        at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:197)
        at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:47)
        at org.mortbay.jetty.handler.ContextHandler.startContext(ContextHandler.java:549)
        at org.mortbay.jetty.servlet.Context.startContext(Context.java:136)
        at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java:1282)
        at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java:518)
        at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:499)
        at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
        at org.mortbay.jetty.handler.HandlerCollection.doStart(HandlerCollection.java:152)
        at org.mortbay.jetty.handler.ContextHandlerCollection.doStart(ContextHandlerCollection.java:156)
        at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
        at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java:130)
        at org.mortbay.jetty.Server.doStart(Server.java:224)
        at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
        at org.mortbay.xml.XmlConfiguration.main(XmlConfiguration.java:985)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at org.mortbay.start.Main.invokeMain(Main.java:194)
        at org.mortbay.start.Main.start(Main.java:534)
        at org.mortbay.start.Main.start(Main.java:441)
        at org.mortbay.start.Main.main(Main.java:119)
    Caused by: org.hibernate.exception.GenericJDBCException: could not execute query
        at org.hibernate.exception.SQLStateConverter.handledNonSpecificException(SQLStateConverter.java:126)
        at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:114)
        at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:66)
        at org.hibernate.loader.Loader.doList(Loader.java:2235)
        at org.hibernate.loader.Loader.listIgnoreQueryCache(Loader.java:2129)
        at org.hibernate.loader.Loader.list(Loader.java:2124)
        at org.hibernate.loader.criteria.CriteriaLoader.list(CriteriaLoader.java:118)
        at org.hibernate.impl.SessionImpl.list(SessionImpl.java:1597)
        at org.hibernate.impl.CriteriaImpl.list(CriteriaImpl.java:306)
        at org.hibernate.impl.CriteriaImpl.uniqueResult(CriteriaImpl.java:328)
        at com.visionobjects.myscript.fpp.form.dao.impl.ModuleInfoDaoImpl.getModuleInfo(ModuleInfoDaoImpl.java:57)
        at com.visionobjects.myscript.fpp.ModuleRegistration$1.doInTransactionWithoutResult(ModuleRegistration.java:73)
        at org.springframework.transaction.support.TransactionCallbackWithoutResult.doInTransaction(TransactionCallbackWithoutResult.java:33)
        at org.springframework.transaction.support.TransactionTemplate.execute(TransactionTemplate.java:130)
        at com.visionobjects.myscript.fpp.ModuleRegistration.init(ModuleRegistration.java:66)
        at com.visionobjects.myscript.fpp.ModuleRegistration.start(ModuleRegistration.java:60)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeCustomInitMethod(AbstractAutowireCapableBeanFactory.java:1544)
        at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(AbstractAutowireCapableBeanFactory.java:1485)
        at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1417)
        ... 33 more
    Caused by: java.sql.SQLException: error enlisting a JdbcConnectionHandle of a JdbcPooledConnection from datasource fppDataSource in state ACCESSIBLE with usage count 1 wrapping SQLServerXAConnection:1 on  ProxyConnectionID:1
        at bitronix.tm.resource.jdbc.JdbcConnectionHandle.enlistResource(JdbcConnectionHandle.java:86)
        at bitronix.tm.resource.jdbc.JdbcConnectionHandle.prepareStatement(JdbcConnectionHandle.java:243)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at bitronix.tm.resource.jdbc.BaseProxyHandlerClass.invoke(BaseProxyHandlerClass.java:63)
        at $Proxy29.prepareStatement(Unknown Source)
        at org.hibernate.jdbc.AbstractBatcher.getPreparedStatement(AbstractBatcher.java:534)
        at org.hibernate.jdbc.AbstractBatcher.getPreparedStatement(AbstractBatcher.java:452)
        at org.hibernate.jdbc.AbstractBatcher.prepareQueryStatement(AbstractBatcher.java:161)
        at org.hibernate.loader.Loader.prepareQueryStatement(Loader.java:1577)
        at org.hibernate.loader.Loader.doQuery(Loader.java:696)
        at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:259)
        at org.hibernate.loader.Loader.doList(Loader.java:2232)
        ... 52 more
    Caused by: bitronix.tm.internal.BitronixSystemException: cannot enlist an XAResourceHolderState with uniqueName=fppDataSource XAResource= XAResourceID:1 with XID a Bitronix XID [6A657474792D6670702D73657276657200000145FFC68B9B00000000 : 6A657474792D6670702D73657276657200000145FFC68BCA00000002],
    error=XAER_RMERR
        at bitronix.tm.BitronixTransaction.enlistResource(BitronixTransaction.java:100)
        at bitronix.tm.resource.common.TransactionContextHelper.enlistInCurrentTransaction(TransactionContextHelper.java:70)
        at bitronix.tm.resource.jdbc.JdbcConnectionHandle.enlistResource(JdbcConnectionHandle.java:84)
        ... 66 more
    <b>Caused by: javax.transaction.xa.XAException: com.microsoft.sqlserver.jdbc.SQLServerException: The function START: has failed. No transaction cookie was returned </b>
        at com.microsoft.sqlserver.jdbc.SQLServerXAResource.DTC_XA_Interface(SQLServerXAResource.java:642)
        at com.microsoft.sqlserver.jdbc.SQLServerXAResource.start(SQLServerXAResource.java:674)
        at bitronix.tm.internal.XAResourceHolderState.start(XAResourceHolderState.java:211)
        at bitronix.tm.internal.XAResourceManager.enlist(XAResourceManager.java:108)
        at bitronix.tm.BitronixTransaction.enlistResource(BitronixTransaction.java:93)
        ... 68 more
    I think the "bold" exception is the key.
    Also the configuration file of my jetty server.
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <!DOCTYPE Configure PUBLIC "-//Mort Bay Consulting//DTD Configure//EN" "http://jetty.mortbay.org/configure.dtd">
    <!-- developpment jetty configuration -->
    <!-- launch with main class : org.mortbay.start.Main app arguments:
    deploy-conf/jetty-conf/mysql/jetty-dev.xml vm arguments : -Xmx1024M -DSTOP.KEY=stop
    -DSTOP.PORT=6669 to stop : - - stop -Xmx1024M -DSTOP.KEY=stop -DSTOP.PORT=6669 -->
    <Configure id="Server" class="org.mortbay.jetty.Server">
    <Array id="plusConfig" type="java.lang.String">
    <Item>org.mortbay.jetty.webapp.WebInfConfiguration</Item>
    <Item>org.mortbay.jetty.plus.webapp.EnvConfiguration</Item>
    <Item>org.mortbay.jetty.plus.webapp.Configuration</Item>
    <Item>org.mortbay.jetty.webapp.JettyWebXmlConfiguration</Item>
    <Item>org.mortbay.jetty.webapp.TagLibConfiguration</Item>
    </Array>
    <Array id="serverClasses" type="java.lang.String">
    </Array>
    <Array id="systemClasses" type="java.lang.String">
    </Array>
    <!-- web apps -->
    <Set name="handler">
    <New id="handlerContext" class="org.mortbay.jetty.handler.ContextHandlerCollection">
    <Set name="handlers">
    <Array id="handlerArray" type="org.mortbay.jetty.webapp.WebAppContext">
    <!-- wrapper server -->
    <Item>
    <New class="org.mortbay.jetty.webapp.WebAppContext">
    <Arg>./webapps/myscript-fpp-wrapper-server.war</Arg>
    <Arg>/myscript-form-wrapper-server</Arg>
    <Set name="serverClasses">
    <Ref id="serverClasses" />
    </Set>
    <Set name="ConfigurationClasses">
    <Ref id="plusConfig" />
    </Set>
    </New>
    </Item>
    <!-- form server -->
    <Item>
    <New class="org.mortbay.jetty.webapp.WebAppContext">
    <Arg>./webapps/myscript-fpp-form-server.war
    </Arg>
    <Arg>/myscript-form-server</Arg>
    <Set name="serverClasses">
    <Ref id="serverClasses" />
    </Set>
    <Set name="ConfigurationClasses">
    <Ref id="plusConfig" />
    </Set>
    </New>
    </Item>
    <!-- hwr server -->
    <Item>
    <New class="org.mortbay.jetty.webapp.WebAppContext">
    <Arg>./webapps/myscript-fpp-hwr-server.war</Arg>
    <Arg>/myscript-form-hwr-server</Arg>
    <Set name="serverClasses">
    <Ref id="serverClasses" />
    </Set>
    <Set name="ConfigurationClasses">
    <Ref id="plusConfig" />
    </Set>
    </New>
    </Item>
    </Array>
    </Set>
    </New>
    </Set>
    <Call name="addConnector">
    <Arg>
    <New class="org.mortbay.jetty.nio.SelectChannelConnector">
    <Set name="port">8080</Set>
    </New>
    </Arg>
    </Call>
    <!-- Use the jdk 1.5 platformMBeanServer -->
    <Call id="MBeanServer" class="java.lang.management.ManagementFactory"
    name="getPlatformMBeanServer" />
    <Get id="Container" name="container">
    <Call name="addEventListener">
    <Arg>
    <New class="org.mortbay.management.MBeanContainer">
    <Arg>
    <Ref id="MBeanServer" />
    </Arg>
    <Call name="start" />
    </New>
    </Arg>
    </Call>
    </Get>
    <!-- Setup the RMIRegistry on a specific port -->
    <Call id="rmiRegistry" class="java.rmi.registry.LocateRegistry"
    name="createRegistry">
    <Arg type="int">2099</Arg>
    </Call>
    <!-- Setup the JMXConnectorServer on a specific rmi server port -->
    <Call id="jmxConnectorServer" class="javax.management.remote.JMXConnectorServerFactory"
    name="newJMXConnectorServer">
    <Arg>
    <New class="javax.management.remote.JMXServiceURL">
    <Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
    </Arg>
    </New>
    </Arg>
    <Arg />
    <Arg>
    <Ref id="MBeanServer" />
    </Arg>
    <Call name="start" />
    </Call>
    <!--************************* -->
    <!-- embbeded ActiveMQ Broker -->
    <!--************************* -->
    <New id="brokerService" class="org.apache.activemq.broker.BrokerService">
    <Set name="brokerName">fppBrokerActiveMQ</Set>
    <Set name="dataDirectoryFile"></Set>
    <Call name="getSystemUsage">
    <Call name="getMemoryUsage">
    <Set name="limit">26428800</Set>
    </Call>
    <Call name="getStoreUsage">
    <Set name="limit">204857600</Set>
    </Call>
    </Call>
    <Call name="addConnector">
    <Arg>nio://localhost:61615</Arg>
    </Call>
    <Call name="start"></Call>
    </New>
    <!-- ************************** -->
    <!-- common fpp jndi resources -->
    <!-- ************************** -->
    <!-- ui debug properties -->
    <New id="fpp.common-ui.velocityProperties" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>fpp/fpp.common-ui.velocityProperties</Arg>
    <Arg>
    <New class="java.util.Properties">
    <Put name="spring.resource.loader.class">org.springframework.ui.velocity.SpringResourceLoader
    </Put>
    <Put name="spring.resource.loader.cache">false</Put>
    <Put name="velocimacro.library.autoreload">true</Put>
    </New>
    </Arg>
    </New>
    <New id="fpp.wrapper-server.properties" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>fpp/fpp.wrapper-server.properties</Arg>
    <Arg>
    <New class="java.util.Properties">
    <Put name="fpp.wrapper-server.instanceServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/instance?wsdl
    </Put>
    <Put name="fpp.wrapper-server.formServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/form?wsdl
    </Put>
    <Put name="fpp.wrapper-server.formDeprecatedServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/formDeprecated?wsdl
    </Put>
    <Put name="fpp.wrapper-server.hwrResourceServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/hwrResource?wsdl
    </Put>
    <Put name="fpp.wrapper-server.defaultEnvironmentName">default</Put>
    <Put name="fpp.wrapper-server.defaultEnvironmentType">STANDARD</Put>
    <Put name="fpp.wrapper-server.formdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>
    <Put name="fpp.wrapper-server.formdb.hibernate.show_sql">true</Put>
    <Put name="fpp.wrapper-server.formdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
    <Put name="fpp.wrapper-server.formdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup</Put>
    <Put name="fpp.wrapper-server.formdb.hibernate.cache.use_query_cache">false</Put>
    <Put name="fpp.wrapper-server.formdb.hibernate.cache.use_second_level_cache">false</Put>
    <Put name="fpp.wrapper-server.formdb.hibernate.cache.use_structured_cache">false</Put>
    <Put name="fpp.wrapper-server.formdb.hibernate.cache.provider_class">org.hibernate.cache.NoCacheProvider</Put>
    </New>
    </Arg>
    </New>
    <!-- transaction manager - bitronix -->
    <Call name="getConfiguration" class="bitronix.tm.TransactionManagerServices">
    <Set name="serverId">jetty-fpp-server</Set>
    <Set name="gracefulShutdownInterval">45</Set>
    <Set name="logPart1Filename">btm/btm1.tlog</Set>
    <Set name="logPart2Filename">btm/btm2.tlog</Set>
    </Call>
    <Set name="gracefulShutdown">60000</Set>
    <Call name="addLifeCycle">
    <Arg>
    <New class="bitronix.tm.integration.jetty6.BTMLifeCycle" />
    </Arg>
    </Call>
    <New class="org.mortbay.jetty.plus.naming.Transaction">
    <Arg>
    <Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
    </Arg>
    </New>
    <New class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>java:/TransactionManager</Arg>
    <Arg>
    <Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
    </Arg>
    </New>
    <New id="userTransactionManager" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>java:comp/TransactionManager</Arg>
    <Arg>
    <Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
    </Arg>
    </New>
    <New id="userTransactionManager" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>java:comp/UserTransaction</Arg>
    <Arg>
    <Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
    </Arg>
    </New>
    <!-- database data source -->
    <New id="fppDataSource" class="bitronix.tm.resource.jdbc.PoolingDataSource">
    <Set name="uniqueName">fppDataSource</Set>
    <Set name="className">com.microsoft.sqlserver.jdbc.SQLServerXADataSource</Set>
    <Set name="minPoolSize">0</Set>
    <Set name="maxPoolSize">50</Set>
    <Get name="driverProperties">
    <Put name="serverName">DYHVDB01</Put>
    <Put name="instanceName">ALPHA</Put>
    <Put name="integratedSecurity">false</Put>
    <Put name="databaseName">tdb_digipen_fpp</Put>
    <Put name="user">manage_digipen</Put>
    <Put name="password">5T1fte?</Put>
    <!--Needed to test??<Put name="pinGlobalTxToPhysicalConnection">true</Put>-->
    </Get>
    <Call name="init" />
    </New>
    <!-- Jms connection factories -->
    <New id="fppServerConnectionFactory" class="bitronix.tm.resource.jms.PoolingConnectionFactory">
    <Set name="className">org.apache.activemq.ActiveMQXAConnectionFactory</Set>
    <Set name="uniqueName">fppServerConnectionFactory</Set>
    <Set name="minPoolSize">4</Set>
    <Set name="maxPoolSize">40</Set>
    <Set name="allowLocalTransactions">true</Set>
    <Get name="driverProperties">
    <Put name="brokerURL">nio://localhost:61615?jms.prefetchPolicy.all=50</Put>
    <New class="org.apache.activemq.RedeliveryPolicy">
    <Set name="maximumRedeliveries">-1</Set>
    <Set name="backOffMultiplier">2</Set>
    </New>
    </Get>
    <Call name="init" />
    </New>
    <!-- JMS Queues & topics -->
    <New id="formNotifiationTopic" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>fpp/formNotifiationTopic</Arg>
    <Arg>
    <New class="org.apache.activemq.command.ActiveMQTopic">
    <Arg>formNotifiationTopic</Arg>
    </New>
    </Arg>
    </New>
    <New id="fieldJmsQueue" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>fpp/fieldJmsQueue</Arg>
    <Arg>
    <New class="org.apache.activemq.command.ActiveMQQueue">
    <Arg>fieldJmsQueue</Arg>
    </New>
    </Arg>
    </New>
    <New id="fieldNotifJmsQueue" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>fpp/fieldNotifJmsQueue</Arg>
    <Arg>
    <New class="org.apache.activemq.command.ActiveMQQueue">
    <Arg>fieldNotifJmsQueue</Arg>
    </New>
    </Arg>
    </New>
    <New id="inkJmsQueue" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>fpp/inkJmsQueue</Arg>
    <Arg>
    <New class="org.apache.activemq.command.ActiveMQQueue">
    <Arg>inkJmsQueue</Arg>
    </New>
    </Arg>
    </New>
    <!-- native library services -->
    <New id="myscriptLicenseService" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>fpp/myscriptLicenseService</Arg>
    <Arg>
    <New
    class="com.visionobjects.licensemanager.impl.MyscriptLicenseServiceImpl">
    <Arg>localhost</Arg>
    </New>
    </Arg>
    </New>
    <!-- *********************** -->
    <!-- form server properties -->
    <!-- *********************** -->
    <New id="fpp.form.properties" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>fpp/fpp.form.properties</Arg>
    <Arg>
    <New class="java.util.Properties">
    <Put name="fpp.form.defaultEnvironmentName">default</Put>
    <Put name="fpp.form.defaultEnvironmentType">STANDARD</Put>
    <Put name="fpp.form.jbpm.job.nbexecutor">4</Put>
    <Put name="fpp.form.jbpm.job.idleinterval">1000</Put>
    <Put name="fpp.form.field.notif.nbconsumers">2</Put>
    <Put name="fpp.form.ink.nbconsumers">2</Put>
    <Put name="fpp.form.instance.instanceValidationMode">STANDARD</Put>
    <Put name="fpp.form.formdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>
    <!--<Put name="fpp.form.formdb.hibernate.show_sql">true</Put>-->
    <Put name="fpp.form.formdb.hibernate.show_sql">true</Put>
    <Put name="fpp.form.formdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
    <Put name="fpp.form.formdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup
    </Put>
    <Put name="fpp.form.formdb.hibernate.cache.use_query_cache">false</Put>
    <Put name="fpp.form.formdb.hibernate.cache.use_second_level_cache">false</Put>
    <Put name="fpp.form.formdb.hibernate.cache.use_structured_cache">false</Put>
    <Put name="fpp.form.formdb.hibernate.cache.provider_class">org.hibernate.cache.NoCacheProvider</Put>
    <Put name="fpp.form.jbpmdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>
    <Put name="fpp.form.jbpmdb.hibernate.show_sql">true</Put>
    <Put name="fpp.form.jbpmdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
    <Put name="fpp.form.jbpmdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup
    </Put>
    <Put name="fpp.form.jbpmdb.hibernate.cache.use_query_cache">false</Put>
    <Put name="fpp.form.jbpmdb.hibernate.cache.use_second_level_cache">false</Put>
    <Put name="fpp.form.jbpmdb.hibernate.cache.use_structured_cache">false</Put>
    <Put name="fpp.form.jbpmdb.hibernate.cache.provider_class">org.hibernate.cache.NoCacheProvider</Put>
    <Put name="fpp.form.scheduler.jobStore.driverDelegateClass">org.quartz.impl.jdbcjobstore.MSSQLDelegate</Put>
    <Put name="fpp.form.scheduler.dataSource.driver">com.microsoft.sqlserver.jdbc.SQLServerDriver</Put>
    <Put name="fpp.form.scheduler.dataSource.URL">jdbc:sqlserver://DYHVDB01\ALPHA;DatabaseName=tdb_digipen_fpp;integratedSecurity=false
    </Put>
    <Put name="fpp.form.scheduler.dataSource.user">manage_digipen</Put>
    <Put name="fpp.form.scheduler.dataSource.password">5T1fte?</Put>
    <!-- Cron Format A cron expression is a string comprised of 6 or 7 fields
    separated by white space. Fields can contain any of the allowed values, along
    with various combinations of the allowed special characters for that field.
    The fields are as follows: Field Name Mandatory Allowed Values Allowed Special
    Characters Seconds YES 0-59 , - * / Minutes YES 0-59 , - * / Hours YES 0-23
    , - * / Day of month YES 1-31 , - * ? / L W Month YES 1-12 or JAN-DEC , -
    * / Day of week YES 1-7 or SUN-SAT , - * ? / L # Year NO empty, 1970-2099
    , - * / -->
    <Put name="fpp.form.purge.moduleinfo.cron">0 0/1 * * * ?</Put>
    <Put name="fpp.form.purge.instances.cron">0 0 * * * ?</Put>
    <Put name="fpp.form.purge.instances.defaultcase">365</Put>
    <Put name="fpp.form.purge.instances.case1">10</Put>
    <Put name="fpp.form.purge.instances.case2">60</Put>
    <Put name="fpp.form.purge.instances.case3">100</Put>
    <Put name="fpp.form.purge.instances.case4">30</Put>
    <Put name="fpp.form.purge.instances.case5">60</Put>
    <Put name="fpp.form.export.cron">0 0 * * * ?</Put>
    <Put name="fpp.form.export.exportpath">C:\FPP</Put>
    <Put name="fpp.form.export.exportMode">REGULAR</Put>
    <Put name="fpp.form.export.buildingType">INCREMENTAL</Put>
    <Put name="fpp.form.export.addInformations">true</Put>
    </New>
    </Arg>
    </New>
    <New id="fppFormDbDataSource" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>jdbc/fppFormDbDataSource</Arg>
    <Arg>
    <Ref id="fppDataSource"></Ref>
    </Arg>
    </New>
    <New id="fppJbpmDbDataSource" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>jdbc/fppJbpmDbDataSource</Arg>
    <Arg>
    <Ref id="fppDataSource" />
    </Arg>
    </New>
    <New id="formJmsTopicConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>fpp/formJmsTopicConnectionFactory</Arg>
    <Arg>
    <Ref id="fppServerConnectionFactory" />
    </Arg>
    </New>
    <New id="fieldProducerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>fpp/fieldProducerJmsConnectionFactory</Arg>
    <Arg>
    <Ref id="fppServerConnectionFactory" />
    </Arg>
    </New>
    <New id="fieldNotifConsumerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>fpp/fieldNotifConsumerJmsConnectionFactory</Arg>
    <Arg>
    <Ref id="fppServerConnectionFactory" />
    </Arg>
    </New>
    <New id="inkConsumerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>fpp/inkConsumerJmsConnectionFactory</Arg>
    <Arg>
    <Ref id="fppServerConnectionFactory" />
    </Arg>
    </New>
    <!-- HWR SERVER -->
    <New id="fpp.hwr-server.properties" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>fpp/fpp.hwr-server.properties</Arg>
    <Arg>
    <New class="java.util.Properties">
    <Put name="fpp.hwr-server.formbroker.uri">failover:nio://localhost:61615</Put>
    <Put name="fpp.hwr-server.fieldConsumers">4</Put>
    <Put name="fpp.hwr-server.resourceManager.memoryUsageThreshold">262144000</Put>
    <Put name="fpp.hwr-server.resourceManager.resourceCountThreshold">150</Put>
    <Put name="fpp.hwr-server.resourceManager.idleTimeLimit">1800000</Put>
    <Put name="fpp.hwr-server.resourceManager.timeToLive">3600000</Put>
    <Put name="fpp.hwr-server.resourceManager.wakeUpInterval">100000</Put>
    <Put name="fpp.hwr-server.formdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>
    <Put name="fpp.hwr-server.formdb.hibernate.show_sql">true</Put>
    <Put name="fpp.hwr-server.formdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
    <Put
    name="fpp.hwr-server.formdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup</Put>
    <Put name="fpp.hwr-server.internal.dumpRecognition">false</Put>
    </New>
    </Arg>
    </New>
    <New id="myscriptHwrService" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>fpp/myscriptHwrService</Arg>
    <Arg>
    <New class="com.visionobjects.myscript.commons.hwr.engine.HwrEngineService">
    <Set name="handwritingContextUserLimit">50</Set>
    <Set name="resourceUserLimit">0</Set>
    <Set name="otherObjectUserLimit">500</Set>
    <Call name="doStart" />
    </New>
    </Arg>
    </New>
    <New id="fieldNotificationProducerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>fpp/fieldNotificationProducerJmsConnectionFactory</Arg>
    <Arg>
    <Ref id="fppServerConnectionFactory" />
    </Arg>
    </New>
    <New id="fieldConsumerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>fpp/fieldConsumerJmsConnectionFactory</Arg>
    <Arg>
    <Ref id="fppServerConnectionFactory" />
    </Arg>
    </New>
    <!-- wrapper -->
    <New id="fppWrapperServerConnectionFactory" class="org.apache.activemq.ActiveMQConnectionFactory">
    <Set name="brokerURL">nio://localhost:61615</Set>
    <Set name="redeliveryPolicy">
    <New class="org.apache.activemq.RedeliveryPolicy">
    <Set name="maximumRedeliveries">-1</Set>
    <Set name="backOffMultiplier">2</Set>
    </New>
    </Set>
    </New>
    <New id="formNotificationConsumerFactory" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>fpp/formNotificationConsumerFactory</Arg>
    <Arg>
    <Ref id="fppWrapperServerConnectionFactory" />
    </Arg>
    </New>
    <New id="inkProducerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>fpp/inkProducerJmsConnectionFactory</Arg>
    <Arg>
    <Ref id="fppWrapperServerConnectionFactory" />
    </Arg>
    </New>
    <!-- JMX/SENSORS -->
    <New id="inkJmsQueueUrl" class="java.lang.String">
    <Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
    </Arg>
    </New>
    <New id="inkJmsQueueObjectName" class="java.lang.String">
    <Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=inkJmsQueue
    </Arg>
    </New>
    <New id="fieldNotifJmsQueueUrl" class="java.lang.String">
    <Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
    </Arg>
    </New>
    <New id="fieldNotifJmsQueueObjectName" class="java.lang.String">
    <Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=fieldNotifJmsQueue
    </Arg>
    </New>
    <New id="fieldJmsQueueUrl" class="java.lang.String">
    <Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
    </Arg>
    </New>
    <New id="fieldJmsQueueObjectName" class="java.lang.String">
    <Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=fieldJmsQueue
    </Arg>
    </New>
    <New id="formNotifiationTopicUrl" class="java.lang.String">
    <Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
    </Arg>
    </New>
    <New id="formNotifiationTopicObjectName" class="java.lang.String">
    <Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=formNotifiationTopic
    </Arg>
    </New>
    <New id="server.list" class="java.util.HashMap">
    <!-- InkJmsQueue -->
    <Put name="WRP">
    <New class="java.util.ArrayList">
    <Call name="add">
    <Arg>
    <New class="java.lang.String">
    <Arg>http://localhost:8081</Arg>
    </New>
    </Arg>
    </Call>
    <Call name="add">
    <Arg>
    <New class="java.lang.String">
    <Arg>http://localhost:8084</Arg>
    </New>
    </Arg>
    </Call>
    </New>
    </Put>
    <Put name="FORM">
    <New class="java.util.ArrayList">
    <Call name="add">
    <Arg>
    <New class="java.lang.String">
    <Arg>http://localhost:8080</Arg>
    </New>
    </Arg>
    </Call>
    <Call name="add">
    <Arg>
    <New class="java.lang.String">
    <Arg>http://localhost:8084</Arg>
    </New>
    </Arg>
    </Call>
    </New>
    </Put>
    <Put name="HWR">
    <New class="java.util.ArrayList">
    <Call name="add">
    <Arg>
    <New class="java.lang.String">
    <Arg>http://localhost:8083</Arg>
    </New>
    </Arg>
    </Call>
    <Call name="add">
    <Arg>
    <New class="java.lang.String">
    <Arg>http://localhost:8084</Arg>
    </New>
    </Arg>
    </Call>
    </New>
    </Put>
    </New>
    <New id="fpp.form.jmx.properties" class="java.util.HashMap">
    <!-- InkJmsQueue -->
    <Put name="inkJmsQueueSize">
    <New class="java.util.HashMap">
    <Put name="urlQueue">
    <Ref id="inkJmsQueueUrl" />
    </Put>
    <Put name="objectName">
    <Ref id="inkJmsQueueObjectName" />
    </Put>
    <Put name="attribute">QueueSize</Put>
    </New>
    </Put>
    <Put name="inkJmsConsumerCount">
    <New class="java.util.HashMap">
    <Put name="urlQueue">
    <Ref id="inkJmsQueueUrl" />
    </Put>
    <Put name="objectName">
    <Ref id="inkJmsQueueObjectName" />
    </Put>
    <Put name="attribute">ConsumerCount</Put>
    </New>
    </Put>
    <Put name="inkJmsDequeueCount">
    <New class="java.util.HashMap">
    <Put name="urlQueue">
    <Ref id="inkJmsQueueUrl" />
    </Put>
    <Put name="objectName">
    <Ref id="inkJmsQueueObjectName" />
    </Put>
    <Put name="attribute">DequeueCount</Put>
    </New>
    </Put>
    <Put name="inkJmsAverageEnqueueTime">
    <New class="java.util.HashMap">
    <Put name="urlQueue">
    <Ref id="inkJmsQueueUrl" />
    </Put>
    <Put name="objectName">
    <Ref id="inkJmsQueueObjectName" />
    </Put>
    <Put name="attribute">AverageEnqueueTime</Put>
    </New>
    </Put>
    <Put name="inkJmsMaxEnqueueTime">
    <New class="java.util.HashMap">
    <Put name="urlQueue">
    <Ref id="inkJmsQueueUrl" />
    </Put>
    <Put name="objectName">
    <Ref id="inkJmsQueueObjectName" />
    </Put>
    <Put name="attribute">MaxEnqueueTime</Put>
    </New>
    </Put>
    <!--FieldNotifJmsQueue -->
    <Put name="fieldNotifJmsQueueSize">
    <New class="java.util.HashMap">
    <Put name="urlQueue">
    <Ref id="fieldNotifJmsQueueUrl" />
    </Put>
    <Put name="objectName">
    <Ref id="fieldNotifJmsQueueObjectName" />
    </Put>
    <Put name="attribute">QueueSize</Put>
    </New>
    </Put>
    <Put name="fieldNotifJmsConsumerCount">
    <New class="java.util.HashMap">
    <Put name="urlQueue">
    <Ref id="fieldNotifJmsQueueUrl" />
    </Put>
    <Put name="objectName">
    <Ref id="fieldNotifJmsQueueObjectName" />
    </Put>
    <Put name="attribute">ConsumerCount</Put>
    </New>
    </Put>
    <Put name="fieldNotifJmsDequeueCount">
    <New class="java.util.HashMap">
    <Put name="urlQueue">
    <Ref id="fieldNotifJmsQueueUrl" />
    </Put>
    <Put name="objectName">
    <Ref id="fieldNotifJmsQueueObjectName" />
    </Put>
    <Put name="attribute">DequeueCount</Put>
    </New>
    </Put>
    <Put name="fieldNotifJmsAverageEnqueueTime">
    <New class="java.util.HashMap">
    <Put name="urlQueue">
    <Ref id="fieldNotifJmsQueueUrl" />
    </Put>
    <Put name="objectName">
    <Ref id="fieldNotifJmsQueueObjectName" />
    </Put>
    <Put name="attribute">AverageEnqueueTime</Put>
    </New>
    </Put>
    <Put name="fieldNotifJmsMaxEnqueueTime">
    <New class="java.util.HashMap">
    <Put name="urlQueue">
    <Ref id="fieldNotifJmsQueueUrl" />
    </Put>
    <Put name="objectName">
    <Ref id="fieldNotifJmsQueueObjectName" />
    </Put>
    <Put name="attribute">MaxEnqueueTime</Put>
    </New>
    </Put>
    </New>
    <New id="fpp.form.ui.parameters" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>fpp/fpp.form.ui.parameters</Arg>
    <Arg>
    <New
    class="com.visionobjects.myscript.fpp.ui.parameters.impl.UIParametersServiceImpl">
    <Set name="jmxProperties">
    <Ref id="fpp.form.jmx.properties"></Ref>
    </Set>
    <Set name="serverList">
    <Ref id="server.list"></Ref>
    </Set>
    </New>
    </Arg>
    </New>
    </Configure>
    Thanks so much in advance.
     

    Hello guys,
    I have been setting a production system with bitronix transaction manager, SQL server 2008, XA transactions and jetty 6. In the beginning this software was configured to run with MySQL. But one of my customer decided to move everything to MSSQL server 2008.
    In that moment I was trying to get this up and running for some weeks (The configuration was completely different) and finally I got it.
    The configuration with MSSQL server was running perfectly during 1 month but then from one day to other the error message I will show now appeared and I do not how to solve it. I almost read all the hints from google about this exception but nothing helped
    me out.
    I hope you guys can help me to find a way to solve it.
    - I tried different version of the jdbc driver 3.0 and 4.0.
    - I tried to export exactly the database to my localserver and it's running perfectly with the same configuration.
    The problem is that I cannot reproduce the error in other place that is not the customer and at the same time I have no access to their internal database server. They installed all the XA transaction stuff (dll in binn, enable XA, and grant the permissions
    for SQLXAUser), I am quite sure because it was running for one month without any problem.
    I asked to the customer if anything happenend on their server (microsoft updates, machines reboot, ...) but nothing of these happened.
    Also I tried this link out but did not help me.
    <a href="http://social.msdn.microsoft.com/Forums/sqlserver/en-US/15c1e6f5-ec1e-4376-8f45-25e61ffc1306/the-function-start-has-failed-no-transaction-cookie-was-returned?forum=sqldataaccess">http://social.msdn.microsoft.com/Forums/sqlserver/en-US/15c1e6f5-ec1e-4376-8f45-25e61ffc1306/the-function-start-has-failed-no-transaction-cookie-was-returned?forum=sqldataaccess</a>
    The exception is the following:
     [2014-05-15 14:06:08,842] INFO  3666[main] - org.mortbay.log.Slf4jLog.info(Slf4jLog.java:67) - Starting Bitronix Transaction Manager
    [2014-05-15 14:06:08,951] INFO  3775[main] - org.mortbay.log.Slf4jLog.info(Slf4jLog.java:67) - Extract ./webapps/myscript-fpp-wrapper-server.war to D:\Temp\Jetty_0_0_0_0_8080_myscript.fpp.wrapper.server.war__myscript.form.wrapper.server__.bnwnn7\webapp
    [2014-05-15 14:06:10,324] INFO  5148[main] - org.mortbay.log.Slf4jLog.info(Slf4jLog.java:67) - NO JSP Support for /myscript-form-wrapper-server, did not find org.apache.jasper.servlet.JspServlet
    [2014-05-15 14:06:12,742] WARN  7566[main] - org.dozer.config.GlobalSettings.loadGlobalSettings(GlobalSettings.java:118) - Dozer configuration file not found: dozer.properties.  Using defaults for all Dozer global properties.
    [2014-05-15 14:06:13,288] WARN  8112[main] - org.hibernate.util.JDBCExceptionReporter.logExceptions(JDBCExceptionReporter.java:100) - SQL Error: 0, SQLState: null
    [2014-05-15 14:06:13,288]ERROR  8112[main] - org.hibernate.util.JDBCExceptionReporter.logExceptions(JDBCExceptionReporter.java:101) - error enlisting a JdbcConnectionHandle of a JdbcPooledConnection from datasource fppDataSource in state ACCESSIBLE with
    usage count 1 wrapping SQLServerXAConnection:1 on  ProxyConnectionID:1
    [2014-05-15 14:06:13,319]ERROR  8143[main] - org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:220) - Context initialization failed
    org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'moduleRegistration' defined in class path resource [com/visionobjects/myscript/fpp/wrapper/module-registration.xml]: Invocation of init method failed; nested exception is
    org.hibernate.exception.GenericJDBCException: could not execute query
        at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1420)
        at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:519)
        at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:456)
        at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:291)
        at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
        at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:288)
        at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:190)
        at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:580)
        at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:895)
        at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:425)
        at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:276)
        at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:197)
        at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:47)
        at org.mortbay.jetty.handler.ContextHandler.startContext(ContextHandler.java:549)
        at org.mortbay.jetty.servlet.Context.startContext(Context.java:136)
        at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java:1282)
        at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java:518)
        at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:499)
        at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
        at org.mortbay.jetty.handler.HandlerCollection.doStart(HandlerCollection.java:152)
        at org.mortbay.jetty.handler.ContextHandlerCollection.doStart(ContextHandlerCollection.java:156)
        at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
        at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java:130)
        at org.mortbay.jetty.Server.doStart(Server.java:224)
        at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
        at org.mortbay.xml.XmlConfiguration.main(XmlConfiguration.java:985)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at org.mortbay.start.Main.invokeMain(Main.java:194)
        at org.mortbay.start.Main.start(Main.java:534)
        at org.mortbay.start.Main.start(Main.java:441)
        at org.mortbay.start.Main.main(Main.java:119)
    Caused by: org.hibernate.exception.GenericJDBCException: could not execute query
        at org.hibernate.exception.SQLStateConverter.handledNonSpecificException(SQLStateConverter.java:126)
        at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:114)
        at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:66)
        at org.hibernate.loader.Loader.doList(Loader.java:2235)
        at org.hibernate.loader.Loader.listIgnoreQueryCache(Loader.java:2129)
        at org.hibernate.loader.Loader.list(Loader.java:2124)
        at org.hibernate.loader.criteria.CriteriaLoader.list(CriteriaLoader.java:118)
        at org.hibernate.impl.SessionImpl.list(SessionImpl.java:1597)
        at org.hibernate.impl.CriteriaImpl.list(CriteriaImpl.java:306)
        at org.hibernate.impl.CriteriaImpl.uniqueResult(CriteriaImpl.java:328)
        at com.visionobjects.myscript.fpp.form.dao.impl.ModuleInfoDaoImpl.getModuleInfo(ModuleInfoDaoImpl.java:57)
        at com.visionobjects.myscript.fpp.ModuleRegistration$1.doInTransactionWithoutResult(ModuleRegistration.java:73)
        at org.springframework.transaction.support.TransactionCallbackWithoutResult.doInTransaction(TransactionCallbackWithoutResult.java:33)
        at org.springframework.transaction.support.TransactionTemplate.execute(TransactionTemplate.java:130)
        at com.visionobjects.myscript.fpp.ModuleRegistration.init(ModuleRegistration.java:66)
        at com.visionobjects.myscript.fpp.ModuleRegistration.start(ModuleRegistration.java:60)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeCustomInitMethod(AbstractAutowireCapableBeanFactory.java:1544)
        at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(AbstractAutowireCapableBeanFactory.java:1485)
        at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1417)
        ... 33 more
    Caused by: java.sql.SQLException: error enlisting a JdbcConnectionHandle of a JdbcPooledConnection from datasource fppDataSource in state ACCESSIBLE with usage count 1 wrapping SQLServerXAConnection:1 on  ProxyConnectionID:1
        at bitronix.tm.resource.jdbc.JdbcConnectionHandle.enlistResource(JdbcConnectionHandle.java:86)
        at bitronix.tm.resource.jdbc.JdbcConnectionHandle.prepareStatement(JdbcConnectionHandle.java:243)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at bitronix.tm.resource.jdbc.BaseProxyHandlerClass.invoke(BaseProxyHandlerClass.java:63)
        at $Proxy29.prepareStatement(Unknown Source)
        at org.hibernate.jdbc.AbstractBatcher.getPreparedStatement(AbstractBatcher.java:534)
        at org.hibernate.jdbc.AbstractBatcher.getPreparedStatement(AbstractBatcher.java:452)
        at org.hibernate.jdbc.AbstractBatcher.prepareQueryStatement(AbstractBatcher.java:161)
        at org.hibernate.loader.Loader.prepareQueryStatement(Loader.java:1577)
        at org.hibernate.loader.Loader.doQuery(Loader.java:696)
        at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:259)
        at org.hibernate.loader.Loader.doList(Loader.java:2232)
        ... 52 more
    Caused by: bitronix.tm.internal.BitronixSystemException: cannot enlist an XAResourceHolderState with uniqueName=fppDataSource XAResource= XAResourceID:1 with XID a Bitronix XID [6A657474792D6670702D73657276657200000145FFC68B9B00000000 : 6A657474792D6670702D73657276657200000145FFC68BCA00000002],
    error=XAER_RMERR
        at bitronix.tm.BitronixTransaction.enlistResource(BitronixTransaction.java:100)
        at bitronix.tm.resource.common.TransactionContextHelper.enlistInCurrentTransaction(TransactionContextHelper.java:70)
        at bitronix.tm.resource.jdbc.JdbcConnectionHandle.enlistResource(JdbcConnectionHandle.java:84)
        ... 66 more
    <b>Caused by: javax.transaction.xa.XAException: com.microsoft.sqlserver.jdbc.SQLServerException: The function START: has failed. No transaction cookie was returned </b>
        at com.microsoft.sqlserver.jdbc.SQLServerXAResource.DTC_XA_Interface(SQLServerXAResource.java:642)
        at com.microsoft.sqlserver.jdbc.SQLServerXAResource.start(SQLServerXAResource.java:674)
        at bitronix.tm.internal.XAResourceHolderState.start(XAResourceHolderState.java:211)
        at bitronix.tm.internal.XAResourceManager.enlist(XAResourceManager.java:108)
        at bitronix.tm.BitronixTransaction.enlistResource(BitronixTransaction.java:93)
        ... 68 more
    I think the "bold" exception is the key.
    Also the configuration file of my jetty server.
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <!DOCTYPE Configure PUBLIC "-//Mort Bay Consulting//DTD Configure//EN" "http://jetty.mortbay.org/configure.dtd">
    <!-- developpment jetty configuration -->
    <!-- launch with main class : org.mortbay.start.Main app arguments:
    deploy-conf/jetty-conf/mysql/jetty-dev.xml vm arguments : -Xmx1024M -DSTOP.KEY=stop
    -DSTOP.PORT=6669 to stop : - - stop -Xmx1024M -DSTOP.KEY=stop -DSTOP.PORT=6669 -->
    <Configure id="Server" class="org.mortbay.jetty.Server">
    <Array id="plusConfig" type="java.lang.String">
    <Item>org.mortbay.jetty.webapp.WebInfConfiguration</Item>
    <Item>org.mortbay.jetty.plus.webapp.EnvConfiguration</Item>
    <Item>org.mortbay.jetty.plus.webapp.Configuration</Item>
    <Item>org.mortbay.jetty.webapp.JettyWebXmlConfiguration</Item>
    <Item>org.mortbay.jetty.webapp.TagLibConfiguration</Item>
    </Array>
    <Array id="serverClasses" type="java.lang.String">
    </Array>
    <Array id="systemClasses" type="java.lang.String">
    </Array>
    <!-- web apps -->
    <Set name="handler">
    <New id="handlerContext" class="org.mortbay.jetty.handler.ContextHandlerCollection">
    <Set name="handlers">
    <Array id="handlerArray" type="org.mortbay.jetty.webapp.WebAppContext">
    <!-- wrapper server -->
    <Item>
    <New class="org.mortbay.jetty.webapp.WebAppContext">
    <Arg>./webapps/myscript-fpp-wrapper-server.war</Arg>
    <Arg>/myscript-form-wrapper-server</Arg>
    <Set name="serverClasses">
    <Ref id="serverClasses" />
    </Set>
    <Set name="ConfigurationClasses">
    <Ref id="plusConfig" />
    </Set>
    </New>
    </Item>
    <!-- form server -->
    <Item>
    <New class="org.mortbay.jetty.webapp.WebAppContext">
    <Arg>./webapps/myscript-fpp-form-server.war
    </Arg>
    <Arg>/myscript-form-server</Arg>
    <Set name="serverClasses">
    <Ref id="serverClasses" />
    </Set>
    <Set name="ConfigurationClasses">
    <Ref id="plusConfig" />
    </Set>
    </New>
    </Item>
    <!-- hwr server -->
    <Item>
    <New class="org.mortbay.jetty.webapp.WebAppContext">
    <Arg>./webapps/myscript-fpp-hwr-server.war</Arg>
    <Arg>/myscript-form-hwr-server</Arg>
    <Set name="serverClasses">
    <Ref id="serverClasses" />
    </Set>
    <Set name="ConfigurationClasses">
    <Ref id="plusConfig" />
    </Set>
    </New>
    </Item>
    </Array>
    </Set>
    </New>
    </Set>
    <Call name="addConnector">
    <Arg>
    <New class="org.mortbay.jetty.nio.SelectChannelConnector">
    <Set name="port">8080</Set>
    </New>
    </Arg>
    </Call>
    <!-- Use the jdk 1.5 platformMBeanServer -->
    <Call id="MBeanServer" class="java.lang.management.ManagementFactory"
    name="getPlatformMBeanServer" />
    <Get id="Container" name="container">
    <Call name="addEventListener">
    <Arg>
    <New class="org.mortbay.management.MBeanContainer">
    <Arg>
    <Ref id="MBeanServer" />
    </Arg>
    <Call name="start" />
    </New>
    </Arg>
    </Call>
    </Get>
    <!-- Setup the RMIRegistry on a specific port -->
    <Call id="rmiRegistry" class="java.rmi.registry.LocateRegistry"
    name="createRegistry">
    <Arg type="int">2099</Arg>
    </Call>
    <!-- Setup the JMXConnectorServer on a specific rmi server port -->
    <Call id="jmxConnectorServer" class="javax.management.remote.JMXConnectorServerFactory"
    name="newJMXConnectorServer">
    <Arg>
    <New class="javax.management.remote.JMXServiceURL">
    <Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
    </Arg>
    </New>
    </Arg>
    <Arg />
    <Arg>
    <Ref id="MBeanServer" />
    </Arg>
    <Call name="start" />
    </Call>
    <!--************************* -->
    <!-- embbeded ActiveMQ Broker -->
    <!--************************* -->
    <New id="brokerService" class="org.apache.activemq.broker.BrokerService">
    <Set name="brokerName">fppBrokerActiveMQ</Set>
    <Set name="dataDirectoryFile"></Set>
    <Call name="getSystemUsage">
    <Call name="getMemoryUsage">
    <Set name="limit">26428800</Set>
    </Call>
    <Call name="getStoreUsage">
    <Set name="limit">204857600</Set>
    </Call>
    </Call>
    <Call name="addConnector">
    <Arg>nio://localhost:61615</Arg>
    </Call>
    <Call name="start"></Call>
    </New>
    <!-- ************************** -->
    <!-- common fpp jndi resources -->
    <!-- ************************** -->
    <!-- ui debug properties -->
    <New id="fpp.common-ui.velocityProperties" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>fpp/fpp.common-ui.velocityProperties</Arg>
    <Arg>
    <New class="java.util.Properties">
    <Put name="spring.resource.loader.class">org.springframework.ui.velocity.SpringResourceLoader
    </Put>
    <Put name="spring.resource.loader.cache">false</Put>
    <Put name="velocimacro.library.autoreload">true</Put>
    </New>
    </Arg>
    </New>
    <New id="fpp.wrapper-server.properties" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>fpp/fpp.wrapper-server.properties</Arg>
    <Arg>
    <New class="java.util.Properties">
    <Put name="fpp.wrapper-server.instanceServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/instance?wsdl
    </Put>
    <Put name="fpp.wrapper-server.formServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/form?wsdl
    </Put>
    <Put name="fpp.wrapper-server.formDeprecatedServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/formDeprecated?wsdl
    </Put>
    <Put name="fpp.wrapper-server.hwrResourceServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/hwrResource?wsdl
    </Put>
    <Put name="fpp.wrapper-server.defaultEnvironmentName">default</Put>
    <Put name="fpp.wrapper-server.defaultEnvironmentType">STANDARD</Put>
    <Put name="fpp.wrapper-server.formdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>
    <Put name="fpp.wrapper-server.formdb.hibernate.show_sql">true</Put>
    <Put name="fpp.wrapper-server.formdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
    <Put name="fpp.wrapper-server.formdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup</Put>
    <Put name="fpp.wrapper-server.formdb.hibernate.cache.use_query_cache">false</Put>
    <Put name="fpp.wrapper-server.formdb.hibernate.cache.use_second_level_cache">false</Put>
    <Put name="fpp.wrapper-server.formdb.hibernate.cache.use_structured_cache">false</Put>
    <Put name="fpp.wrapper-server.formdb.hibernate.cache.provider_class">org.hibernate.cache.NoCacheProvider</Put>
    </New>
    </Arg>
    </New>
    <!-- transaction manager - bitronix -->
    <Call name="getConfiguration" class="bitronix.tm.TransactionManagerServices">
    <Set name="serverId">jetty-fpp-server</Set>
    <Set name="gracefulShutdownInterval">45</Set>
    <Set name="logPart1Filename">btm/btm1.tlog</Set>
    <Set name="logPart2Filename">btm/btm2.tlog</Set>
    </Call>
    <Set name="gracefulShutdown">60000</Set>
    <Call name="addLifeCycle">
    <Arg>
    <New class="bitronix.tm.integration.jetty6.BTMLifeCycle" />
    </Arg>
    </Call>
    <New class="org.mortbay.jetty.plus.naming.Transaction">
    <Arg>
    <Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
    </Arg>
    </New>
    <New class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>java:/TransactionManager</Arg>
    <Arg>
    <Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
    </Arg>
    </New>
    <New id="userTransactionManager" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>java:comp/TransactionManager</Arg>
    <Arg>
    <Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
    </Arg>
    </New>
    <New id="userTransactionManager" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>java:comp/UserTransaction</Arg>
    <Arg>
    <Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
    </Arg>
    </New>
    <!-- database data source -->
    <New id="fppDataSource" class="bitronix.tm.resource.jdbc.PoolingDataSource">
    <Set name="uniqueName">fppDataSource</Set>
    <Set name="className">com.microsoft.sqlserver.jdbc.SQLServerXADataSource</Set>
    <Set name="minPoolSize">0</Set>
    <Set name="maxPoolSize">50</Set>
    <Get name="driverProperties">
    <Put name="serverName">DYHVDB01</Put>
    <Put name="instanceName">ALPHA</Put>
    <Put name="integratedSecurity">false</Put>
    <Put name="databaseName">tdb_digipen_fpp</Put>
    <Put name="user">manage_digipen</Put>
    <Put name="password">5T1fte?</Put>
    <!--Needed to test??<Put name="pinGlobalTxToPhysicalConnection">true</Put>-->
    </Get>
    <Call name="init" />
    </New>
    <!-- Jms connection factories -->
    <New id="fppServerConnectionFactory" class="bitronix.tm.resource.jms.PoolingConnectionFactory">
    <Set name="className">org.apache.activemq.ActiveMQXAConnectionFactory</Set>
    <Set name="uniqueName">fppServerConnectionFactory</Set>
    <Set name="minPoolSize">4</Set>
    <Set name="maxPoolSize">40</Set>
    <Set name="allowLocalTransactions">true</Set>
    <Get name="driverProperties">
    <Put name="brokerURL">nio://localhost:61615?jms.prefetchPolicy.all=50</Put>
    <New class="org.apache.activemq.RedeliveryPolicy">
    <Set name="maximumRedeliveries">-1</Set>
    <Set name="backOffMultiplier">2</Set>
    </New>
    </Get>
    <Call name="init" />
    </New>
    <!-- JMS Queues & topics -->
    <New id="formNotifiationTopic" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>fpp/formNotifiationTopic</Arg>
    <Arg>
    <New class="org.apache.activemq.command.ActiveMQTopic">
    <Arg>formNotifiationTopic</Arg>
    </New>
    </Arg>
    </New>
    <New id="fieldJmsQueue" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>fpp/fieldJmsQueue</Arg>
    <Arg>
    <New class="org.apache.activemq.command.ActiveMQQueue">
    <Arg>fieldJmsQueue</Arg>
    </New>
    </Arg>
    </New>
    <New id="fieldNotifJmsQueue" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>fpp/fieldNotifJmsQueue</Arg>
    <Arg>
    <New class="org.apache.activemq.command.ActiveMQQueue">
    <Arg>fieldNotifJmsQueue</Arg>
    </New>
    </Arg>
    </New>
    <New id="inkJmsQueue" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>fpp/inkJmsQueue</Arg>
    <Arg>
    <New class="org.apache.activemq.command.ActiveMQQueue">
    <Arg>inkJmsQueue</Arg>
    </New>
    </Arg>
    </New>
    <!-- native library services -->
    <New id="myscriptLicenseService" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>fpp/myscriptLicenseService</Arg>
    <Arg>
    <New
    class="com.visionobjects.licensemanager.impl.MyscriptLicenseServiceImpl">
    <Arg>localhost</Arg>
    </New>
    </Arg>
    </New>
    <!-- *********************** -->
    <!-- form server properties -->
    <!-- *********************** -->
    <New id="fpp.form.properties" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>fpp/fpp.form.properties</Arg>
    <Arg>
    <New class="java.util.Properties">
    <Put name="fpp.form.defaultEnvironmentName">default</Put>
    <Put name="fpp.form.defaultEnvironmentType">STANDARD</Put>
    <Put name="fpp.form.jbpm.job.nbexecutor">4</Put>
    <Put name="fpp.form.jbpm.job.idleinterval">1000</Put>
    <Put name="fpp.form.field.notif.nbconsumers">2</Put>
    <Put name="fpp.form.ink.nbconsumers">2</Put>
    <Put name="fpp.form.instance.instanceValidationMode">STANDARD</Put>
    <Put name="fpp.form.formdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>
    <!--<Put name="fpp.form.formdb.hibernate.show_sql">true</Put>-->
    <Put name="fpp.form.formdb.hibernate.show_sql">true</Put>
    <Put name="fpp.form.formdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
    <Put name="fpp.form.formdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup
    </Put>
    <Put name="fpp.form.formdb.hibernate.cache.use_query_cache">false</Put>
    <Put name="fpp.form.formdb.hibernate.cache.use_second_level_cache">false</Put>
    <Put name="fpp.form.formdb.hibernate.cache.use_structured_cache">false</Put>
    <Put name="fpp.form.formdb.hibernate.cache.provider_class">org.hibernate.cache.NoCacheProvider</Put>
    <Put name="fpp.form.jbpmdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>
    <Put name="fpp.form.jbpmdb.hibernate.show_sql">true</Put>
    <Put name="fpp.form.jbpmdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
    <Put name="fpp.form.jbpmdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup
    </Put>
    <Put name="fpp.form.jbpmdb.hibernate.cache.use_query_cache">false</Put>
    <Put name="fpp.form.jbpmdb.hibernate.cache.use_second_level_cache">false</Put>
    <Put name="fpp.form.jbpmdb.hibernate.cache.use_structured_cache">false</Put>
    <Put name="fpp.form.jbpmdb.hibernate.cache.provider_class">org.hibernate.cache.NoCacheProvider</Put>
    <Put name="fpp.form.scheduler.jobStore.driverDelegateClass">org.quartz.impl.jdbcjobstore.MSSQLDelegate</Put>
    <Put name="fpp.form.scheduler.dataSource.driver">com.microsoft.sqlserver.jdbc.SQLServerDriver</Put>
    <Put name="fpp.form.scheduler.dataSource.URL">jdbc:sqlserver://DYHVDB01\ALPHA;DatabaseName=tdb_digipen_fpp;integratedSecurity=false
    </Put>
    <Put name="fpp.form.scheduler.dataSource.user">manage_digipen</Put>
    <Put name="fpp.form.scheduler.dataSource.password">5T1fte?</Put>
    <!-- Cron Format A cron expression is a string comprised of 6 or 7 fields
    separated by white space. Fields can contain any of the allowed values, along
    with various combinations of the allowed special characters for that field.
    The fields are as follows: Field Name Mandatory Allowed Values Allowed Special
    Characters Seconds YES 0-59 , - * / Minutes YES 0-59 , - * / Hours YES 0-23
    , - * / Day of month YES 1-31 , - * ? / L W Month YES 1-12 or JAN-DEC , -
    * / Day of week YES 1-7 or SUN-SAT , - * ? / L # Year NO empty, 1970-2099
    , - * / -->
    <Put name="fpp.form.purge.moduleinfo.cron">0 0/1 * * * ?</Put>
    <Put name="fpp.form.purge.instances.cron">0 0 * * * ?</Put>
    <Put name="fpp.form.purge.instances.defaultcase">365</Put>
    <Put name="fpp.form.purge.instances.case1">10</Put>
    <Put name="fpp.form.purge.instances.case2">60</Put>
    <Put name="fpp.form.purge.instances.case3">100</Put>
    <Put name="fpp.form.purge.instances.case4">30</Put>
    <Put name="fpp.form.purge.instances.case5">60</Put>
    <Put name="fpp.form.export.cron">0 0 * * * ?</Put>
    <Put name="fpp.form.export.exportpath">C:\FPP</Put>
    <Put name="fpp.form.export.exportMode">REGULAR</Put>
    <Put name="fpp.form.export.buildingType">INCREMENTAL</Put>
    <Put name="fpp.form.export.addInformations">true</Put>
    </New>
    </Arg>
    </New>
    <New id="fppFormDbDataSource" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>jdbc/fppFormDbDataSource</Arg>
    <Arg>
    <Ref id="fppDataSource"></Ref>
    </Arg>
    </New>
    <New id="fppJbpmDbDataSource" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>jdbc/fppJbpmDbDataSource</Arg>
    <Arg>
    <Ref id="fppDataSource" />
    </Arg>
    </New>
    <New id="formJmsTopicConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>fpp/formJmsTopicConnectionFactory</Arg>
    <Arg>
    <Ref id="fppServerConnectionFactory" />
    </Arg>
    </New>
    <New id="fieldProducerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>fpp/fieldProducerJmsConnectionFactory</Arg>
    <Arg>
    <Ref id="fppServerConnectionFactory" />
    </Arg>
    </New>
    <New id="fieldNotifConsumerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>fpp/fieldNotifConsumerJmsConnectionFactory</Arg>
    <Arg>
    <Ref id="fppServerConnectionFactory" />
    </Arg>
    </New>
    <New id="inkConsumerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>fpp/inkConsumerJmsConnectionFactory</Arg>
    <Arg>
    <Ref id="fppServerConnectionFactory" />
    </Arg>
    </New>
    <!-- HWR SERVER -->
    <New id="fpp.hwr-server.properties" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>fpp/fpp.hwr-server.properties</Arg>
    <Arg>
    <New class="java.util.Properties">
    <Put name="fpp.hwr-server.formbroker.uri">failover:nio://localhost:61615</Put>
    <Put name="fpp.hwr-server.fieldConsumers">4</Put>
    <Put name="fpp.hwr-server.resourceManager.memoryUsageThreshold">262144000</Put>
    <Put name="fpp.hwr-server.resourceManager.resourceCountThreshold">150</Put>
    <Put name="fpp.hwr-server.resourceManager.idleTimeLimit">1800000</Put>
    <Put name="fpp.hwr-server.resourceManager.timeToLive">3600000</Put>
    <Put name="fpp.hwr-server.resourceManager.wakeUpInterval">100000</Put>
    <Put name="fpp.hwr-server.formdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>
    <Put name="fpp.hwr-server.formdb.hibernate.show_sql">true</Put>
    <Put name="fpp.hwr-server.formdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
    <Put
    name="fpp.hwr-server.formdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup</Put>
    <Put name="fpp.hwr-server.internal.dumpRecognition">false</Put>
    </New>
    </Arg>
    </New>
    <New id="myscriptHwrService" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>fpp/myscriptHwrService</Arg>
    <Arg>
    <New class="com.visionobjects.myscript.commons.hwr.engine.HwrEngineService">
    <Set name="handwritingContextUserLimit">50</Set>
    <Set name="resourceUserLimit">0</Set>
    <Set name="otherObjectUserLimit">500</Set>
    <Call name="doStart" />
    </New>
    </Arg>
    </New>
    <New id="fieldNotificationProducerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>fpp/fieldNotificationProducerJmsConnectionFactory</Arg>
    <Arg>
    <Ref id="fppServerConnectionFactory" />
    </Arg>
    </New>
    <New id="fieldConsumerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>fpp/fieldConsumerJmsConnectionFactory</Arg>
    <Arg>
    <Ref id="fppServerConnectionFactory" />
    </Arg>
    </New>
    <!-- wrapper -->
    <New id="fppWrapperServerConnectionFactory" class="org.apache.activemq.ActiveMQConnectionFactory">
    <Set name="brokerURL">nio://localhost:61615</Set>
    <Set name="redeliveryPolicy">
    <New class="org.apache.activemq.RedeliveryPolicy">
    <Set name="maximumRedeliveries">-1</Set>
    <Set name="backOffMultiplier">2</Set>
    </New>
    </Set>
    </New>
    <New id="formNotificationConsumerFactory" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>fpp/formNotificationConsumerFactory</Arg>
    <Arg>
    <Ref id="fppWrapperServerConnectionFactory" />
    </Arg>
    </New>
    <New id="inkProducerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>fpp/inkProducerJmsConnectionFactory</Arg>
    <Arg>
    <Ref id="fppWrapperServerConnectionFactory" />
    </Arg>
    </New>
    <!-- JMX/SENSORS -->
    <New id="inkJmsQueueUrl" class="java.lang.String">
    <Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
    </Arg>
    </New>
    <New id="inkJmsQueueObjectName" class="java.lang.String">
    <Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=inkJmsQueue
    </Arg>
    </New>
    <New id="fieldNotifJmsQueueUrl" class="java.lang.String">
    <Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
    </Arg>
    </New>
    <New id="fieldNotifJmsQueueObjectName" class="java.lang.String">
    <Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=fieldNotifJmsQueue
    </Arg>
    </New>
    <New id="fieldJmsQueueUrl" class="java.lang.String">
    <Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
    </Arg>
    </New>
    <New id="fieldJmsQueueObjectName" class="java.lang.String">
    <Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=fieldJmsQueue
    </Arg>
    </New>
    <New id="formNotifiationTopicUrl" class="java.lang.String">
    <Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
    </Arg>
    </New>
    <New id="formNotifiationTopicObjectName" class="java.lang.String">
    <Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=formNotifiationTopic
    </Arg>
    </New>
    <New id="server.list" class="java.util.HashMap">
    <!-- InkJmsQueue -->
    <Put name="WRP">
    <New class="java.util.ArrayList">
    <Call name="add">
    <Arg>
    <New class="java.lang.String">
    <Arg>http://localhost:8081</Arg>
    </New>
    </Arg>
    </Call>
    <Call name="add">
    <Arg>
    <New class="java.lang.String">
    <Arg>http://localhost:8084</Arg>
    </New>
    </Arg>
    </Call>
    </New>
    </Put>
    <Put name="FORM">
    <New class="java.util.ArrayList">
    <Call name="add">
    <Arg>
    <New class="java.lang.String">
    <Arg>http://localhost:8080</Arg>
    </New>
    </Arg>
    </Call>
    <Call name="add">
    <Arg>
    <New class="java.lang.String">
    <Arg>http://localhost:8084</Arg>
    </New>
    </Arg>
    </Call>
    </New>
    </Put>
    <Put name="HWR">
    <New class="java.util.ArrayList">
    <Call name="add">
    <Arg>
    <New class="java.lang.String">
    <Arg>http://localhost:8083</Arg>
    </New>
    </Arg>
    </Call>
    <Call name="add">
    <Arg>
    <New class="java.lang.String">
    <Arg>http://localhost:8084</Arg>
    </New>
    </Arg>
    </Call>
    </New>
    </Put>
    </New>
    <New id="fpp.form.jmx.properties" class="java.util.HashMap">
    <!-- InkJmsQueue -->
    <Put name="inkJmsQueueSize">
    <New class="java.util.HashMap">
    <Put name="urlQueue">
    <Ref id="inkJmsQueueUrl" />
    </Put>
    <Put name="objectName">
    <Ref id="inkJmsQueueObjectName" />
    </Put>
    <Put name="attribute">QueueSize</Put>
    </New>
    </Put>
    <Put name="inkJmsConsumerCount">
    <New class="java.util.HashMap">
    <Put name="urlQueue">
    <Ref id="inkJmsQueueUrl" />
    </Put>
    <Put name="objectName">
    <Ref id="inkJmsQueueObjectName" />
    </Put>
    <Put name="attribute">ConsumerCount</Put>
    </New>
    </Put>
    <Put name="inkJmsDequeueCount">
    <New class="java.util.HashMap">
    <Put name="urlQueue">
    <Ref id="inkJmsQueueUrl" />
    </Put>
    <Put name="objectName">
    <Ref id="inkJmsQueueObjectName" />
    </Put>
    <Put name="attribute">DequeueCount</Put>
    </New>
    </Put>
    <Put name="inkJmsAverageEnqueueTime">
    <New class="java.util.HashMap">
    <Put name="urlQueue">
    <Ref id="inkJmsQueueUrl" />
    </Put>
    <Put name="objectName">
    <Ref id="inkJmsQueueObjectName" />
    </Put>
    <Put name="attribute">AverageEnqueueTime</Put>
    </New>
    </Put>
    <Put name="inkJmsMaxEnqueueTime">
    <New class="java.util.HashMap">
    <Put name="urlQueue">
    <Ref id="inkJmsQueueUrl" />
    </Put>
    <Put name="objectName">
    <Ref id="inkJmsQueueObjectName" />
    </Put>
    <Put name="attribute">MaxEnqueueTime</Put>
    </New>
    </Put>
    <!--FieldNotifJmsQueue -->
    <Put name="fieldNotifJmsQueueSize">
    <New class="java.util.HashMap">
    <Put name="urlQueue">
    <Ref id="fieldNotifJmsQueueUrl" />
    </Put>
    <Put name="objectName">
    <Ref id="fieldNotifJmsQueueObjectName" />
    </Put>
    <Put name="attribute">QueueSize</Put>
    </New>
    </Put>
    <Put name="fieldNotifJmsConsumerCount">
    <New class="java.util.HashMap">
    <Put name="urlQueue">
    <Ref id="fieldNotifJmsQueueUrl" />
    </Put>
    <Put name="objectName">
    <Ref id="fieldNotifJmsQueueObjectName" />
    </Put>
    <Put name="attribute">ConsumerCount</Put>
    </New>
    </Put>
    <Put name="fieldNotifJmsDequeueCount">
    <New class="java.util.HashMap">
    <Put name="urlQueue">
    <Ref id="fieldNotifJmsQueueUrl" />
    </Put>
    <Put name="objectName">
    <Ref id="fieldNotifJmsQueueObjectName" />
    </Put>
    <Put name="attribute">DequeueCount</Put>
    </New>
    </Put>
    <Put name="fieldNotifJmsAverageEnqueueTime">
    <New class="java.util.HashMap">
    <Put name="urlQueue">
    <Ref id="fieldNotifJmsQueueUrl" />
    </Put>
    <Put name="objectName">
    <Ref id="fieldNotifJmsQueueObjectName" />
    </Put>
    <Put name="attribute">AverageEnqueueTime</Put>
    </New>
    </Put>
    <Put name="fieldNotifJmsMaxEnqueueTime">
    <New class="java.util.HashMap">
    <Put name="urlQueue">
    <Ref id="fieldNotifJmsQueueUrl" />
    </Put>
    <Put name="objectName">
    <Ref id="fieldNotifJmsQueueObjectName" />
    </Put>
    <Put name="attribute">MaxEnqueueTime</Put>
    </New>
    </Put>
    </New>
    <New id="fpp.form.ui.parameters" class="org.mortbay.jetty.plus.naming.Resource">
    <Arg>
    <Ref id="Server" />
    </Arg>
    <Arg>fpp/fpp.form.ui.parameters</Arg>
    <Arg>
    <New
    class="com.visionobjects.myscript.fpp.ui.parameters.impl.UIParametersServiceImpl">
    <Set name="jmxProperties">
    <Ref id="fpp.form.jmx.properties"></Ref>
    </Set>
    <Set name="serverList">
    <Ref id="server.list"></Ref>
    </Set>
    </New>
    </Arg>
    </New>
    </Configure>
    Thanks so much in advance.
     

  • TS3147 Since my last update for Mac OS X Lion 10.7.5 I have been unable to print to either my HP or Lexmark printers!  Everything is connected but I get an "idle" message in the queue.  I have "Reset printer system" and re-added these printers. No luck. H

    Since my last update for Mac OS X Lion 10.7.5 I have been unable to print to either my HP or Lexmark printers!  Everything is connected but I get an "idle" message in the queue.  I have "Reset printer system" and re-added these printers. No luck. Help?

    Hello,
    It isn't the fw in Network you want o use or look at, that's for something completely different.
    My first suspect is the Power Adapter on the LaCie has gone.
    At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
    Reset the Firewire bus
    If your Firewire or USB isn't recognizing any device.  A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
    1. Shut the machine down.
    2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
    3. leave it for 10 minutes.
    4. Connect back up and reboot.
    http://www.macmaps.com/firewirebug2.html

  • During a power outage, my mac was on and when it came back on, it was reset. No pictures, documents, etc. How can I fix this?

    My mac was on during a power outage, and when I turned it back on, it was reset. I cannot find any of my pictures or documents. I would really like to fix this on my own. Does anyone have any ideas? The memory seems to be cleared.

    There may be no fix. The outage may have caused a damaging electrical spike.
    Try this first:
    Repair the Hard Drive and Permissions - Mavericks, Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
    If this does not work, then try this:
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it isthree times faster than wireless.
    If this doesn't work then:
    Install Mavericks, Lion/Mountain Lion Using Internet Recovery
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    This should restore the version of OS X originally pre-installed on the computer.

  • Reset Printing System does not exist on my computer!!!

    I have been trying to get my HP PSC 2175 to print and working with HP support to do this. It just prints out blank pages. The last thing they sent me was to Reset the printing system using the Printer Setup Utility. And they sent me to the below link:
    http://docs.info.apple.com/article.html?artnum=301185
    For whatever reason, the "Reset Printing System" DOES NOT EXIST on my computer. I actually sent screen captures to show them. The first showed my
    version of the Printer Setup Utility (3.0) and the second showed the
    Printer Setup Utility menu - with no such option. I am running OS 10.4.4 and have all of the updates. I even opened the Printer Setup Utility holding down the "option" key.
    Does anyone know how to reclaim this feature???
    thanks
    eric

    After all of the emails back and forth with HP, I have really only done two things: A complete manual uninstall - which is a royal pain in the butt. That is worse than any uninstall with windows, and way worse than Class MacOS. Then they kept trying to get me to Reset the Printing system - which is what I can't do.
    I upgraded to Tiger via a DVD - straight from the box. I had 10.3.x, bought Tiger and upgraded. I have since updated it via the website. I think what I just installed was the combo updater - but I don't think it really did anything as I had already done that.
    If there is a better way to go, please let me know. I searched all over Apple's site for just that piece of the printing system, but unlike the old OS, there doesn't seem to be a way to download those components.

Maybe you are looking for