Maintenance View Property

Hello Experts,
We have a requirement wherein the productive client is locked for customizing (through SCC4 transaction) and the client-dependent customizings are transported from the dev client through the transport requests.
But the maint. view in our case is editable in the client which is locked for customizing.
Is there any settings in the maintenance view that should be made such that the property of the client is taken into consideration?
Best Regards
Seshadri

If you have created a transport on the system that allows the modification, then just copy it into your system that does not. We do that a lot here. Our configuration and development boxes are two different boxes. We move the config to the client where the data is located.
No need to release the transport:
SCC1, enter in your source and transport request, and start the job.
Hopefully that works for you!
Michelle

Similar Messages

Wiki Pages - Open Web Part Page in maintenance view

I am trying add custom .aspx pages to a SharePoint 2010 Document Library. When I try to edit properties for those pages, the edit page shows "Open Web Part Page in maintenance view to delete problem Web Parts and remove personal settings.
Open Web Part Page in maintenance view." I click Open Web Part Page in maintenance view
The page displays
The are currently no Web Parts associated with any Web Part Zones on this page. Web Parts added to the page outside of a Web Part Zone will not appear in this list.
I don't do anything with the maintenance view because there are no Web Parts to delete.
As a test, I save the content of the custom.aspx page as a text file, custom.txt. The edit properties displays just fine.
Another test, I save the content as custom.htm. The edit properties displays just fine.
I try many variations of saving the content of custom.aspx with various html tags and even no tags at all. One version just has the text,"test" in the page. Save error:
Open Web Part Page in maintenance view to delete problem Web Parts and remove personal settings. Open Web Part Page in maintenance view."
Going down another path, I try to compare the source of this aspx page with other SharePoint aspx pages. One test is the Wiki Page. All Wiki pages display the same message on my farm. Is this a known issue with Wiki Pages?
<apparently I'm not allowed to add images yet>
As another point of comparison I opened the Edit Properties part within an Office 365 Wiki. Same message.
<apparently I'm not allowed to add images yet>

Hi Chris,
As your description, when you uploaded a .aspx page into a library and edited the properties, the message "Open Web Part Page in maintenance view to delete problem Web Parts and remove personal settings. Open Web Part Page in maintenance view"
showed.
I could reproduce this issue if I uploaded a .aspx page into a library and edited its properties.
Then I went to Site Pages library, and select a page and edit its property, the same message also showed like the screenshot:
It seems that the message will show when we edit the properties of a page no matter which library we upload it to, it seems to be by design.
In addition, if you want to upload a image into the thread, you can first upload the image into OneDrive, then copy and paste the URL of the image here.
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Adding field in Maintenance view of table

Hi,
I am trying to create a custom maintanable table. Now the requirement is I need to add one more extra field in the maintenace view of the table which should not be in the table fields and is for display only in the maintencae view.
I tried adding a cloumn by editing the screen program generated by the table maintenance generator. I get the the display in the maintenance view of that extra field. But I dont get the values populated.
Can you please let me know in which PBO or PAI i should write the module programe ..
Help will be rewarded with points.

Hello Bluesh
Normally the extra field should be from a table that has a foreign-key relationship to your main table. Thus, add this additional table to the list of tables for the view. If it does not have a suitable relationship you cannot add it to the list of tables.
Afterwards add the required field to the list of view fields and set its property to 'R' = read-only.
If correctly defined there is no need at all to modify the screen(s) or the coding of the PBO/PAI modules.
Example: your z-table contains field KUNNR (value table KNA1) and you want to add the NAME1 field to your maintenance view
add table KNA1 to the list of tables
add field NAME1 to view fields
set its property to 'R'
regenerate function modules and screens
Regards
Uwe

Hiding a Maintenance View in a View Cluster

Hello ABAP Experts,
We have a scenario where we would like to hide a maintenance view to an existing view cluster based on condition.
Is it possible via events of a view cluster, where i can hide the view at runtime based on some condition before the view cluster is displayed ?
Is there any way as well, which help achieve this hiding of views ?
For example in the below View Cluster, i would like to hide "Define object links" view from the main view cluster "Define document Types".
Thanks,
Naresh

Hi Naresh,
Yes, you can do it in events of a view cluster, define a subroutine and bounding it to event(02) in SE54,
when you define the subroutine, it will ask you creat a mian program, in this main program, you need 'INCLUDE lsvcmcod'.
Then you can access some standard data, http://help.sap.com/saphelp_nw04/helpdata/en/62/c302c7de8e11d1a5960000e82deaaa/frameset.htm
INCLUDE lsvcmcod.
FORM yourSubroutineName.
DATA: viewname TYPE vclstruc-object,
        error_flag TYPE vcl_flag_type,
viewname = 'ZTEST_VIEW1'.
* PERFORM vcl_set_table_access_for_obj USING    viewname
*                                       CHANGING error_flag.
----> according your condition to change the view.
IF xxx = yyy.
DELETE vcl_struc_tab WHERE object = viewname.
ENDIF.
ENDFORM.
regards,
Archer

Possibility to edit datasets, when there is already a maintenance view?

Hello again,
is it right that I can modify datasets even when there exists a generated maintenance view for the table?
It was usual for me, that in the transaction SE16 don't allow that.
Thank you for your answers!
Melanie

Depends on the setting for "delivery and maintenance" in SE11, should be set to "allowed with restrictions" for the underlying tables of the view. Also check the very good F1 help for this field.
Thomas

Can I use classes and methods for a maintenance view events?

Hello experts,
Instead of perform/form, can I instead use classes and methods, etc for a given maintenance view event, lets say for example I want to use event '01' which is before saving records in the database. Help would be greatly appreciated. Thanks a lot guys!

Hi viraylab,
1. The architecture provided by maintenance view
   for using EVENTS and our own code inside it -
   It is provided using FORM/PERFORM
   concept only.
2. At this stage,we cannot use classes.
3. However, inside the FORM routine,
   we can write what ever we want.
   We can aswell use any abap code, including
   classes and methods.
(But this classes and methods won't have any
   effect on the EVENT provided by maintenance view)
regards,
amit m.

How to create a variant to a maintenance view (trans: SM31)

Hi gurus.
I have created a maintenance view (called z_jest). By running it from SM31 there is a variant option. However, I am not able to create the variant which I want to filter a selection upon in this transaction.
I have even looked into transaction SE54 and created a variant for the maintenance table view there( called z_jestv). Then going back to transaction SM31 and view z_jest, i push 'Variant' radiobutton and type as variant: 'z_jestv', I only get the message: "Variant z_jestv for object z_jest does not exist".
Can anybody please advice on how to create and/or connect the variant to the maintenance view?
Regards LL.

Hi Mahalakshmi
Thanks for reply.
When I look into the procedure, there is a prerequisite: "The basis dialog for which the maintenance variant is created already exists."
I am a little bit unsertain if I miss this 'Basic dialog'. Can you please advice on how to check / create this 'basic dialog' before I go on to create the variant. (I need this 'basic dialog' as input in the procedure you sent.)
(Note: I have already created a 'maintenance dialog' for the view, but I have a feeling, that is something different...)

How to create transaction for a maintenance view, Thank you.

How to create transaction for a maintenance view,
Thank you.
deniz...

Hi Deniz,
Go to se93.
Then create the new T.code.
Under that select parameter Transaction.
Then give the sm30 in the t.code in default values tab.
check the checkbox skip initial screen.
in classification tab.
click checkbox inherit gui attributes..
Now below..
In the default values..
select
viewname and give ur table name.
UPDATE= Xsave
view - table name ( Should be upper case
update X ( should be upper case).
http://www.sap-basis-abap.com/sapbs011.htm
Hope this helps you.
Regards,
Viveks

Using DYNP_VALUES_UPDATE with a Maintenance View

Hi,
I am using a maintenance view to insert values into a table. When user creates a new entry, based on the value provided for a field,I need to fill a read-only field. In PAI, when user enters a value for one field, I am using FM 'DYNP_GET_STEPL' to get the current line and then DYNP_VALUES_UPDATE to fill the contents to the read-only field. But this does not seem to work. Any idea?
Regards
Rachana

Hi Tamas,
I tried both the options suggested by you.
I am updating the underlying structure, still its not visible when the screen loads again. But if you see the same field gets filled with DYNP_VALUES_UPDATE if an F4 help is used for teh first(editable) field and then my read-only field is also filled in the PROCESS ON VALUE REQUEST module.
So my guess is that, since it is a table control, it loops through the rest of the table control which is empty and my underlying structure gets cleared. So the problem could be where I am actually filling the field.
Is it possible to somehow fill the <EXTRACT> table so that teh value is not lost?
Regards
Rachana

Read Only access for a Maintenance view

Hi All,
I have a requirement like this.
There is a Z Maintenance View (namely ZVHR_GRD_TARGET), for this i have to maintain the status as Read Only, and have to create a transaction code for this view with only SE16 access.
I am doing like this.
In the Z view, in the tab "Maint. Status", i have selected the radio button "Read Only" and saved it.
I have created a transaction code for this view with SE16 access with the inputs
Transaction                                                           SE16
Selected the check box "Skip Intial Screen"
Selected the check box for GUI status
Name of the Screenfield                                          DATABROWSE-TABLENAME
value                                                                      ZVHR_GRD_TARGET (i.e, view name)
But the transaction code is not executing.
So can any help me out in the requirement
Regards
Srinivas Kodukula

Anchorage,
Please refer to the following link:
Read Only Schema in Oracle APPS 11i
http://oracle.anilpassi.com/read-only-schema-in-oracle-apps-11i.html
You may also search this forum as the same topic was discussed here many times before.

How to use table maintenance view in module pool screen

hi ,
want to use table maintenance view in a module pool screen so that i can edit, insert, delete and update date in to the ztable.please help.

You can simply call it via SM30.   Or you can call the table maintence view from any program(report or module pool) using a function module.
call function 'VIEW_MAINTENANCE_CALL'
       exporting
            action                       = 'U'
            view_name                    = 'Z_Table_Name'
       exceptions
            client_reference             = 1
            foreign_lock                 = 2
            invalid_action               = 3
            no_clientindependent_auth    = 4
            no_database_function         = 5
            no_editor_function           = 6
            no_show_auth                 = 7
            no_tvdir_entry               = 8
            no_upd_auth                  = 9
            only_show_allowed            = 10
            system_failure               = 11
            unknown_field_in_dba_sellist = 12
            view_not_found               = 13
            others                       = 14.
Regards,
RIch Heilman

How to call a maintenance view from a program

Hello Abapers,
Can anybody explain with some examples. How to call a mainetenance view from a program.
Thanks
Ranjith.

Use FM 'VIEW_MAINTENANCE_CALL'.
REPORT zmaintaintest.
VARIABLES / CONSTANTS
CONSTANTS:
                c_action(1) TYPE c VALUE 'U',                                 "Update
          c_viewname TYPE tabname value 'ZEMP_EXAMPLE', "View Name
          c_field(6) TYPE c VALUE 'EMPNO'.                            "Field Name
INTERNAL TABLES
DATA: itab_rangetab TYPE STANDARD TABLE OF vimsellist,
          v_empno TYPE zempno,
          wa_rangetab TYPE vimsellist.
SELECTION SCREEN
PARAMETERS:     p_empno TYPE   zempno   OBLIGATORY. "Emplyee ID
AT SELECTION-SCREEN
AT SELECTION-SCREEN.
Chcking the existence of the user in EMPLOYEE table
PERFORM validate_employee.
START_OF_SELECTION
START-OF-SELECTION.
This will restrict the user view so that user can only view/change
Table data corresponding to his/her Employee ID
PERFORM define_limited_data_area.
Displaying table maintenance view for a particular employee ID
PERFORM call_view_maintenance.
*&      Form validate_employee
Validate plant entered in the selection screen
FORM validate_employee.
SELECT SINGLE empno     u201CEmployee ID
    FROM zemp_example     u201CEmployee Table
    INTO v_empno
    WHERE empno = p_empno.
IF sy-subrc <> 0.
    MESSAGE 'Not an Valid User' TYPE 'I'.
ENDIF.
ENDFORM.                    "validate_employee
*&      Form DEFINE_LIMITED_DATA_AREA
To restrict the user view so that user can see/change table data
corresponding to his employee ID. Here one internal table is
getting populated with field name as u201CEMPNOu201D (Key field of the table)
And value as given by user in Selection Screen and this is passed as
Parameter in function module 'VIEW_MAINTENANCE_CALL'
FORM define_limited_data_area.
CLEAR wa_rangetab.
wa_rangetab-viewfield = c_field.
wa_rangetab-operator = 'EQ'.
wa_rangetab-value       = p_empno.
APPEND wa_rangetab TO itab_rangetab.
ENDFORM.                    "define_limited_data_area
*&      Form CALL_VIEW_MAINTENANCE.
Displaying table maintenance view for a particular employee ID
FORM call_view_maintenance.
CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
    EXPORTING
      action           = c_action
      view_name   = c_viewname
    TABLES
      dba_sellist     = itab_rangetab.
ENDFORM.                    "call_view_maintenance
Regards,
Joy.

Retrieve data from a maintenance view

Hello,
I created a specefic table.
i want to add a check when deleting lines from a maintenance view.
How to retrieve selected data ?
thanks,
Meriem.

Hello Sudeesh,
I think i must use extract table and Field Symbol <XMARK>.
Can any body give an exemple.
thanks,
Meriem.

Unable to edit maintenance view in SM30

hi everyone.
need your help, I have one custom table, let's call it YTAB. This table has several maintenance views created for it, depending on company code. For YTAB, i have created a maintenance view YTABX.
When we moved YTABX to PRD, we cannot edit it in SM30. The user ID has the right authorization. The error message is "client 100 not modifiable". When I try to edit the mother table YTAB in PRD, I am able to go in and do the changes.
I have already compared the settings for YTABX with the other existing views, they are the same. My settings for the view are:
Access: Read, change, delete & insert
Delivery Class: C
In the table maintenance generator, i have a 2-step maintenance type, recording routine is Standard recording routine and compare flag is automatically adjustable.
Attributes for table YTAB also has delivery class C, table category is transparent table, table maintenance is allowed.
Thank you in advance.

Hello roch,
the direction in which mark points is right but i think you should get some more information on the principles of table types and sap system landscape.
Usually you should not be able to directly maintain any table. This is not only bad style but also a huge risk for the system consistency. That's why application data is always maintained via some kind of application which ensures that the data is vilidated before it is stored.
Customizing data should only be maintained within a development system and then transported through the landscape. To maintain these table you can use generated views, customer developed maintenance views, view clusters which all include automatical link to the transport system. If you would maintain these tables directly in the productiion system it would have another configuration than the development and the quality/test system which makes them more or less useless as you can no longer make any serious test if the server configurations differ.
To prohibit changes of customizing tables on production and test servers the admins lock the systems which results in the message you got. This setting is made in TCODE SCC4. Even if you have for any reason the authorization to use this transaction you should in no case change these settings without approval of basis / system owner.
Kind Regards
Roman

Add button to a maintenance view

I am working with maintenance views and user-defined events in maintenance views at the moment.
Now I'd like to add a button to the maintenance view that will show a popup with recent changes to the selected line of the database table.
Is that possible with user-defined events or should I modify the generated dynpros manually. But then, will the modifications be deleted if I will have to regenerate the maintenance view in the future (e.g. when I might add a field to the database table)?

If you are talking SE54 and Maintenance Views, when I do an SM30 on the Maintenance View and do SYSTEM->STATUS, I see GUI STATUS ZULG on program SAPLSVIM. If you look at that status, I see two buttons with dynamic text. The first one is call GPRF and has dynamic text VIM_PR_STAT_TXT_CH. You can find a suitable PBO event to set the text of that function code and if that works, find a suitable PAI event to respond to that function.
I recall finding some documentation on customizing the GUI STATUS but no luck today trying to find it.
Let us know how it goes.

Maintenance View Property

Similar Messages

Maybe you are looking for