Maintenance Wizard appears to hang:  Execution Started: Please Wait

I have a customer using the following navigation route through Maintenance Wizard:
Process: Prep for Upgrade
Select: Task:Apply AD Minipack
'Start the Run'
However the next page seems to hang with:
Script Executer: Execution Started
'Confirm that "Execution Complete"message appears at the end of this page.'
Please Wait.
Can anyone advise what could be the problem or how to get additonal errors to diagnose the problem.

It took about 8 seconds for me. Not too bad at all.
Jo
"crazykeith" <[email protected]> wrote in
message
news:g0c7rs$d27$[email protected]..
> Hello. I'm trying my first Flash Video insertion..all is
well except I'd
> really like to be able to tell anyone viewing the page
to please hang on
> and
> wait during the buffer period on the progressive
download. it takes
> anywhere
> from 5 to 20 seconds for the player skin to appear and
start playing the
> video.. I have previously been using embedded WMP which
seems to have an
> advantage in this department since the player skin would
immediately
> appear and
> display a buffering video % which would let anyone
viewing the page know
> that
> the video is downloading and is about to play. With the
flash they have
> no
> idea and the page appears not to be working for a "long"
time (5 to 20
> seconds)
> since not even the skin appears. Is there a way to
improve these faults?
> My
> video is about 3 minutes long and can be found here.
>
http://www.centroidcnc.com/cncvideo/cnc_cylinder_head/cnc_cylinder_head_porting.
> html
> thanks ahead of time for any advice! -Keith
>

Similar Messages

  • UWC - Firefox stuck at "Loading: please wait..."  when logging in

    I have UWC installed in a Webserver 6.1 web container on Solaris 10 x86. I can log in no problem with IE but if I try to use Firefox/Mozilla/Netscape it hangs at "Loading: please wait..."
    Has anyone else seen and resolved this issue? Any help would be appreciated.

    Hi,
    Patch: 118541-21 Obsoletes: 117288-99, 117820-13,
    119157-07 Requires: Incompatibles: Packages:
    SUNWuwc
    Patch: 118541-42 Obsoletes: 117288-99, 117820-13,
    119157-07 Requires: Incompatibles: Packages:
    SUNWuwcA good start.
    After doing this I patched MS to:
    [opt/SUNWmsgsr/sbin]# ./imsimta version
    Sun Java(tm) System Messaging Server 6.2-8.04 (built
    Feb 28 2007)
    libimta.so 6.2-8.04 (built 19:20:35, Feb 28 200Did you run through the post-patch install steps as per the patch README? (patch-config;install-newconfig)
    Now when I try to start the http service it fails:
    [opt/SUNWmsgsr/sbin]# ./start-msg http
    Connecting to watcher ...
    Starting http server ..... failedWhat happens when you restart messaging server entirely?
    ./stop-msg; ./start-msg
    What does the http log report?
    Regards,
    Shane.

  • While using Maintenance Wizard Hangs

    Hi all any idea about this issue
    When using Maintenance Wizard, clicking on steps (setup, execute,validate), the comments icon, or the audit icon, a blank window often appears. If the window isn't populated with data within a few seconds, it stays blank. Workaround is to close it and click the icon again. However, this may be risky in some situations where it may actually have started processing in the background, so it's necessary to check the EOF logs directory and active processes on the server to make sure nothing's running, which is time-consuming.

    Hi,
    It sure seems odd that you're having hanging all over the place. It sounds like you're getting terrible performance from your DB and/or Apache server. Is the box overloaded?
    Regarding the little "workaround" you've been using:
    The comments and audit icons are harmless to close & re-open.
    For the substep buttons (setup, exe, val), we need to be a little more specific about WHICH window we're talking about... The substep buttons themselves open a window that says (somewhere) in the title "EOF: Step Action Run". This one is harmless to close & re-open repeatedly.
    However, clicking on the RUN button pops open another window that says "EOF: Step Executer". THAT you do not want to do over and over. Every click of the run button (or browser refresh of specifically the "EOF: Step Executer" window) will cause another execution to kick off. However, you can close both of these, and re-open as many times as you like without repercussions. (In fact, exactly that is documented in our User Guide as the correct procedure for long running steps...)
    I suspect you might have lots of hung processes, all due to one. My advice is to shut down Apache & the DB and restart clean. If you still have hanging, log an iTAR with some specifics.
    Hope that helps,
    -Vikki
    Product and Development Manager for the Maintenance Wizard

  • HT1379 A flashing question mark appears when I re/start my MacBook Air 2013. At first, I pressed Power & Option button and it recovered from Internet. Then, four options appeared but none of them are helpful. Could u please help me to solve it asap?

    Hello,
    A flashing question mark appears when I re/start my MacBook Air 2013. Then, I pressed POWER & OPTOIN buttons and internet options appeared for internet recovery. After internet recovery, the OS X utilities appears with four options (Restore from Time machine, Reinstall OS X, Get help online and Disk utility). But none of them seemed helpful. On the last option Disk utility, the icon created only with 33KB and other disk 1 Mac Os X Base system. On First Aid, the icon Repair disk is disabled. So I could not click on repair disk. Could you please suggest me how to solve this problem asap? Thank you so much for your help in advance!

    You can try the following:
    Install or Reinstall Lion/Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
            the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • I tried many times to turn it on, it turns and the same white screen appears and the update starts again and shuts down. Please Help me!

    Hello!
    I have a MacBook Air. I have got a software update notification couple of days ago. I've clicked on it today, and it started installing updates.
    But, I have got a notification telling that not all updates were installed successfully, then I have clicked on "Restart" from the notification box. Then my Mac restarted and the white screen with Apple logo and the update progress appeared (like what always happens during updates).
    The problem that while the update progress reached around half the way, my Mac shutdown. I tried many times to turn it on, it turns and the same white screen appears and the update starts again and shuts down.
    Please Help me!
    MacBook Air (11-inch Mid 2009)

    Welcome to Apple Discussions
    You did not state whether you installed the update while on battery (not mains) power. You are warned not to apply certain updates without being connected to a charger & mains power.
    Also remove any attached peripherals.
    Reboot in Repair mode (command-R at start)  and use Disk Tools-Disk Utility-Disk First AId to repair your disk, and as long as you're there repair permissions. Next quit Disk Tools and reinstall the OS. After completing that successfully reboot, log in and do a combo update.
    You must have more than enough (not just enough) empty (free) disk space for the update.

  • SUM execution phase hanging in 'Start JAVA' step

    Good day
    I'm trying to update the Java stack of a solman 7.1 stack 10 instance. I'm using SUM v1 SP10 patch0. Everything runs fine until  5.6 [Execution --> Start Java] which times out after a while.
    Part of START-AS-JAVA.LOG:
    Java instance =02
    SCS instance = 03
    Java instance = 02
    SCS instance = 03
    Output of sapcontrol -nr 02 -function GetVersionInfo
    Calling the NWA from browser

    Hi Sunil
    The ABAP instance is definitely up and running at this point [and has been]
    Here is what the SAPMMC reports:
    Message was edited by: Stephan Van Dyk

  • ORA-01017 error, when running Complete configuration of Maintenance Wizard

    Hi Gurus,
    Maintenance wizard version: 2.19 (latest)
    DB: 10.2.0.1
    Linux:
    Upgrade assistance for R12
    Im trying to complete the first step:
    1-Complete configuration of Maintenance Wizard (Required)
    It gives me errors:
    Checking that Remote EOF_HOME is only a directory name, not a path...
    ERROR:
    ORA-01017: invalid username/password; logon denied
    SP2-0640: Not connected
    SP2-0670: Internal number conversion failed
    Usage: { EXIT | QUIT } [ SUCCESS | FAILURE | WARNING | n |
    &lt;variable&gt; | :&lt;bindvariable&gt; ] [ COMMIT | ROLLBACK ]
    ** ERROR!!! **
    ** Project node configuration has FAILED with the problem(s) below:!!! **
    ** Invalid value for REMOTE_EOF_HOME.
    ** Solution: Remove all slashes in the value for REMOTE_EOF_HOME.
    ** The value must be a simple directory name, not a path.
    ** Please have the Project Administrator return to the Modify Project
    ** screen, change the value for REMOTE_EOF_HOME and re-run Step
    ** 1 of the Configuration category.
    ** DO NOT PROCEED WITH ANY OTHER STEPS UNTIL YOU RESOLVE THE PROBLEMS SHOWN **
    ** ABOVE. ALL OTHER STEP EXECUTION DEPENDS ON A SUCCESSFUL PROJECT NODE **
    ** CONFIGURATION. **
    ** ONCE YOU HAVE RESOLVED THE PROBLEMS SHOWN ABOVE, YOU MUST RE-RUN THIS **
    ** STEP AGAIN. **
    I've checked all the forums before posting. Please advise
    Thanks & Regards,
    Rv
    Edited by: Kiran Jakka on May 11, 2012 8:05 AM

    Yes this is what I do, but still receive "Insufficient privileges to write to that location". So I am forced to use normal file system to be able to continue.
    After that I run into the current problem saying OMS configuration failed (see details....) and I try:
    ./opmnctl startall
    opmnctl: starting opmn and all managed processes...
    ================================================================================
    opmn id=uxlpgrid01:6200
    3 of 5 processes started.
    ias-instance id=EnterpriseManager0.uxlpgrid01
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    OC4J/home/default_island
    Error
    --> Process (pid=0)
    no port available from the port range
    failed to start a managed process after the maximum retry limit
    no port available from the port range
    no port available from the port range
    Log:
    none
    ias-component/process-type/process-set:
    OC4J/OC4J_EMPROV/default_island
    Error
    --> Process (pid=0)
    no port available from the port range
    failed to start a managed process after the maximum retry limit
    no port available from the port range
    no port available from the port range
    Log:
    none
    Then:
    ./opmnctl status
    Processes in Instance: EnterpriseManager0.uxlpgrid01
    ------------------------------------------------+---------
    ias-component | process-type | pid | status
    ------------------------------------------------+---------
    DSA | DSA | N/A | Down
    HTTP_Server | HTTP_Server | 23861 | Alive
    LogLoader | logloaderd | N/A | Down
    dcm-daemon | dcm-daemon | 27021 | Alive
    OC4J | home | N/A | Down
    OC4J | OC4J_EM | 10403 | Alive
    OC4J | OC4J_EMPROV | N/A | Down
    WebCache | WebCache | 23872 | Alive
    WebCache | WebCacheAdmin | 23863 | Alive
    Overwhelming :-(
    Thanks for helping
    Askia.

  • Windows 7 Professional Hangs at Please Wait

    Hey, so I'm working on an HP Compaq 6000 Pro.  The other week it stopped allowing logins.  I can get into safe mode, but beyond that it's
    hit and miss.  I have gone over a few articles, and I've tried a few things with temporary results.  When it first happened, I ran Start Up Repair and it proceeded to the login screen.  The next day it stuck at Please Wait again, so I ran sfc.exe,
    got no errors, and then did a clean boot.  That time it allowed me to login twice I believe.  The next day it hung at Please Wait again, so I disabled NLA, Windows Error Reporting, and Network List Services, and, again, it allowed me to login.  It
    stopped again the next day, and everything has been a hit and miss trial.  Occasionally it will allow me to login, but not even close to consistently.  I found multiple hotfixes, but everyone I try either says the update is not applicable, or it
    will start to install, and then simply say the update was not installed.  This machine is the only one experiencing the issue on the domain.  In addition, I had
    read a few times that a possible cause was WMI and one its repositories building up too much, or something along those lines.  I just checked C:\Windows\System32\WBEM\Repository , which I read was the actual folder, and the size is only 20 Mb.  I
    believe this rules out another cause, and my only idea.  The last thing I tried was disabling IPv6, which I heard could fix the issue, and got nothing.  I
    want to avoid just wiping and reloading Windows, since all of the user's data is on the local machine.  Any advice?

    Hi,
    Please understand that there are lots of factors can lead to logon hang. To make the issue clear, please paste exact error messages from Event Viewer directly. Then I will look into it and try to find the culprit.
    What information appears in event logs (Event Viewer)?
    http://windows.microsoft.com/en-US/windows7/What-information-appears-in-event-logs-Event-Viewer
    Please use Windows Live SkyDrive (http://www.skydrive.live.com/) to upload the Error logs to a public folder and share the URLs with us.
    Based on the current situation, I would also suggest you try the following:
    1. Check for the updated drivers especially the network adapter drivers on your computer. if the drivers are not updated then, try updating the drivers.
    2. Perform a system restore using the Windows installation disc.
    Refer the link provided below to run the system restore using the system recovery options.
    http://windows.microsoft.com/en-US/windows7/What-are-the-system-recovery-options-in-Windows-7
    In addition, when the issue occurs, you can press Ctrl+Shift+Esc combine key to launch Task Manager, on the Processes tab, find the process which is taking the most usage of the CPU.
    Please also refer to the links below to check the issue:
    Windows 7 or Windows Server 2008 R2 stops responding at the "Please wait" screen before you are requested to press Ctrl+ALT+DEL
    http://support.microsoft.com/kb/983551
    Windows 7 stuck on "Please Wait.." screen (You can refer to gbps's reply.)
    http://answers.microsoft.com/en-us/windows/forum/windows_7-system/windows-7-stuck-on-please-wait-screen/927cac79-debc-43ec-9d36-9f5b0a19a1f9
    Hope it helps.
    Regards,
    Blair Deng
    Blair Deng
    TechNet Community Support

  • Maintenance Wizard install

    I would normally post this to the Maintenance Wizard forum, but it appears to still be inadvertantly archived.
    In the Maintenance Wizard Install Instructions (329476.1), Step 1. a. ii. h. says: Verify that $HOME does not have execute permissions for group and others. The next line is the command: chmod go-w $HOME which revokes write permission from group and others.
    Two questions: 1.Is it only write permission which should be revoked, because group execute may be desired so applmgr and oracle can read each others directory trees to facilitate co-managing Apps?; and 2. Can Maintenance Wizard be used on a single node Express/Vision configuration, and if so, and if the Express/Vision Apps instance is installed by a single oraapps user, would it be best to create a separate oracle user on that same node to install and run Maintenance Wizard?
    I will probably have questions about how the port configuration will play with Apps on a single box, and if there will be a ports.ini to identify the OAS Apache port in Post Install Step 5, and about Administration Instance settings and Cluster Topology, but hopefully the Maintenance Wizard forum will be back online by the time I get there.
    Thanks in advance. I hope for another of the excellent answers which characterize the Maintenance Wizard forum.

    Due to the Maintenance Wizard forum being unavailable at the time, this question was answered via email. The answer was something to the effect of:
    1 - It is write permission that should be revoked - note has been corrected.
    2 - Yes, it should work fine. The MW can be installed on the same or a different box from the Apps, and it can be owned by the same or different UNIX account. I often recommend using a different owner, just to keep things easier to distinguish.
    The MW Forum is now back up, so please post future questions there! Thanks!
    -Vikki
    Product Manager for the Maintenance Wizard

  • IMovie hangs at start up

    My iMovie just hangs at start up.
    Pie just circles.
    Tried force quitting several times and restarting computer.
    Please help.
    Thanks.

    Hi
    May be You find help here ?
    Trouble
    When iMovie doesn't work as intended this can be due to a lot of reasons
    • iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
    • Creating a new User-Account and log into this - forces iMovie to create all pref. files new and error free
    • Event or Project got corrupted - try to make a copy and repair
    • a codec is used that doesn't work
    • problem in iMovie Cache folder - trash Cache.mov and Cache.plist
    • version miss match of QuickTime Player / iMovie / iDVD
    • preferences are wrong - Repair Preferences
    • other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
    • External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
    ( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
    • USB-flash-memories do not work
    • Net-work connected hard disks - do not work
    • iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie.
    This You do by
    _ close iPhoto
    _ on start up of iPhoto - Keep {cmd and alt-keys down}
    _ now select all five options presented
    _ WAIT a long long time
    • free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
    • external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
    • GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
    • Screen must be set to million-colors
    • Third-party plug-ins doesn't work OK
    • Run "Cache Out X", clear out all caches and restarts the Mac
    • Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
    • Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
    • In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
    (I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
    buenrodri wrote
    I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
    Last resort: Trash all of iMovie and re-install it
    Yours Bengt W

  • 11i to R12 upgrade and Maintenance Wizard and the Maintenance Wizard Forum

    MetaLink doc 215527.1 recommends using the Maintenance Wizard to upgrade from 11i to R12.
    The Maintenance Wizard is extolled elsewhere in this Forum to replace the Upgrade Spreadsheet.
    And it is referenced a couple times in the 11i forum.
    But that's not much press considering Oracle's description below.
    Also, all the Maintenance Wizard MetaLink docs below reference a Maintenance Wizard forum.
    The forum contains excellent feedback including how to use Maintenance Wizard within a firewall.
    LCM: Maintenance Wizard
    But the Maintenance Wizard forum was Archived ~two weeks ago.
    Some clarification would sure be useful.
    What I'm actually trying to confirm is exactly what OAS or iAS or OC4J to use with it.
    Thanks in advance to anyone who can help!
    From 215527.1:
    Oracle Support provides Maintenance Wizard to guide you through the upgrade of Oracle Applications technology stack and products from Release 11i versions to Release 12. It draws on instructions from numerous manuals and other documentation to provide you with a complete picture of the activities required for an upgrade.
    Maintenance Wizard helps you to reduce upgrade tasks by dynamically filtering the necessary steps based on criteria it obtains from your Applications environment. The resulting report is a set of step-by-step instructions of exactly what you need to do to complete your specific upgrade, including any critical patches that your system may require. It can also automatically execute many of the tasks for you, so as to reduce the possibility of errors or accidental omission of vital tasks.
    These MetaLink documents reference the Archived Maintenance Wizard Forum
    434387.1 - Maintenance Wizard Data Sheet
    215527.1 - Maintenance Wizard Overview
    430732.1 - Maintenance Wizard Downloads
    329476.1 - Maintenance Installation Instructions
    430734.1 - Maintenance Wizard Users Guide
    405263.1 - Maintenance Wizard FAQ
    406917.1 - Maintenance Wizard Training
    418301.1 - Maintenance Wizard Webcast

    FYI,
    I am investigating what happened to the Maintenance Wizard forum. I was not alerted or consulted before it was moved to an "archived" location.
    I will provide an update here once I find out how to get the situation corrected.
    In the meantime, please use the other support channels (this forum, FAQ, iTAR's, etc.) for Maintenance Wizard questions and problems.
    Sorry for the inconvenience.
    -Vikki
    Product Manager for the Maintenance Wizard
    PS - To answer Tom's imbedded question (What I'm actually trying to confirm is exactly what OAS or iAS or OC4J to use with it.), please look at the Installation Guide (note 329476.1). In step 2 of the prerequisites, it states:
    Maintenance Wizard version 2.x requires Oracle RDBMS 10g (10.2.0) with 10g iAS (10.1.3).
    Hope this is what you needed, Tom....

  • EBS upgrade from 11i to R12 using Maintenance Wizard question

    I have installed Maintenance Wizard in development envrionment. I picked module to upgrade 11i to R12. When I am defining the node it not only picked up 11i nodes but required me to configure R12 nodes. So Do I have to to create upgrade file system(for R12) and then configured R12 nodes in Define nodes? My configuration is in In configuration at this time as I did not configured R12 nodes.
    Please help me resolve this issue.

    My question is which database oracle_home we have to consider to upgrade R12? and What about another one oracle_home?
    When you run Rapid Install, provide the details of the already upgraded/installed 11.2.0.3 ORACLE_HOME.
    For 11gR1 ORACLE_HOME which is installed by Rapid Install, please see (How to upgrade Oracle E-Business Suite from 11i to 12.1.1 and keep the existing 10g Database? (Doc ID 1345020.1)).
    Thanks,
    Hussein

  • Is there a way to use the Maintenance Wizard with a .profile file...

    Good afternoon all...
    In my environment we have the same applmgr account for multiple databases. The .profile delivers a menu that allows the user to pick which database they wish to work with, and then a script runs which changes the environment specific variables for the desired database.
    In many environments I have worked in the .profile is used to setup environmental variables for the applmgr account.
    In looking at the instructions for setting up Maintenance Wizard it says to ensure ssh or rsh access to each of the applications servers using the applmgr account, and removing any .profile or .login scripts. This is not viable in my environment.
    In asking on metalink I was told 1) just ignore the ssh setup stuff; and 2)the ssh setup is essential for maintenance wizard to work. Clearly conflicting advice.
    How can I install/implement maintenance wizard without the loss of my current .profile configuration?
    Please advise,
    Adam

    Oracle support's assessment was that that there is no way around the requirement to use ssh/remsh, I did a bit of further research into the issue. I developed a resolution for hpux as follows...
    I used ssh rather than remsh for my shell and created a conditional statement in my .profile to handle the issue...
    # Set environment script if not secure shell -- 100311 MAC
    if [ -n "$SSH_CLIENT" ]
    then
    #Set up the shell environment
    set -u
    trap "echo 'logout'" 0
    umask 012
    else
    #Set up the shell environment
    set -u
    trap "echo 'logout'" 0
    umask 012
    # Set up Oracle environment
    . /usr/local/bin/envch
    fi
    The conditional uses -n for not null, or in other words it is True if the variable is defined but false if it is not.
    The variable $SSH_CLIENT is defined when logging in through ssh, but undefined when using another terminal method.
    If it is an ssh shell I still setup other environment variables, but I have to move the "set -u" line to a result of the conditional as placing it before the conditional will make the -n test condition invalid. (It will cause references to an undefined variable to return an error rather than null). If it is not an ssh shell I again setup the variables but also call the interactive component of the login as it's own script.
    I have tested this successfully and will now move on with the rest of the maintenance wizard installation.
    Thank you,
    Adam

  • Installing obiee 11.1.1.7 hangs in start bi_server1

    Hi,
    I am struck in this installation, i have installed the software, while configuring obiee instance, its hangs in starting Managed servers : bi_server1
    Done
    Stopping Derby Server...
    Starting AdminServer
      Starting the domain ...
    progress in calculate progress1
    Executing Task: Starting Managed Server: bi_server1
    oracle.as.install.bi.wls.ServerLifeCycleException: Failed to achieve state RUNNING in 3600seconds.   The server is currently in state STARTING
      at oracle.as.install.bi.wls.ServerLifeCycle.waitForManagedWLSServerState(ServerLifeCycle.java:119)
      at oracle.as.install.bi.wls.ServerLifeCycle.startServerSynchronous(ServerLifeCycle.java:59)
      at oracle.as.install.bi.biconfig.standard.StartStopManagedServer.doExecute(StartStopManagedServer.java:55)
      at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
      at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
      at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
      at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
      at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
      at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
      at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
      at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
      at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
      at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
      at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
      at java.lang.Thread.run(Thread.java:662)
    Also i have found this error in AdminServer.log
    ####<Jun 23, 2013 9:09:52 PM IST> <Notice> <Security> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000012> <1372001992884> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    ####<Jun 23, 2013 9:09:52 PM IST> <Notice> <Security> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000012> <1372001992885> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    ####<Jun 23, 2013 9:09:52 PM IST> <Notice> <Security> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000012> <1372001992886> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    ####<Jun 23, 2013 9:09:52 PM IST> <Notice> <Security> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000012> <1372001992887> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    ####<Jun 23, 2013 9:09:52 PM IST> <Notice> <Security> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000012> <1372001992887> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    ####<Jun 23, 2013 9:09:52 PM IST> <Notice> <Security> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000012> <1372001992889> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    ####<Jun 23, 2013 9:09:52 PM IST> <Notice> <Security> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000012> <1372001992890> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    ####<Jun 23, 2013 9:09:52 PM IST> <Notice> <Security> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000012> <1372001992892> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    ####<Jun 23, 2013 9:09:52 PM IST> <Notice> <Security> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000012> <1372001992893> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    ####<Jun 23, 2013 9:09:52 PM IST> <Info> <WebLogicServer> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000012> <1372001992896> <BEA-000307> <Exportable key maximum lifespan set to 500 uses.>
    ####<Jun 23, 2013 9:20:48 PM IST> <Error> <WebLogicServer> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-000000000000001c> <1372002648290> <BEA-000337> <[STUCK] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "656" seconds working on the request "weblogic.kernel.WorkManagerWrapper$1@14b0b657", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
    Thread-15 "[STUCK] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" <alive, in native, suspended, priority=1, DAEMON> {
        jrockit.net.SocketNativeIO.readBytesPinned(SocketNativeIO.java:???)
        jrockit.net.SocketNativeIO.socketRead(SocketNativeIO.java:24)
        java.net.SocketInputStream.socketRead0(SocketInputStream.java:???)
        java.net.SocketInputStream.read(SocketInputStream.java:107)
        weblogic.utils.io.ChunkedInputStream.read(ChunkedInputStream.java:149)
        java.io.InputStream.read(InputStream.java:85)
        com.certicom.tls.record.ReadHandler.readFragment(Unknown Source)
        com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
        com.certicom.tls.record.ReadHandler.read(Unknown Source)
        ^-- Holding lock: com.certicom.tls.record.ReadHandler@14a90002[thin lock]
        com.certicom.io.InputSSLIOStreamWrapper.read(Unknown Source)
        sun.nio.cs.StreamDecoder.readBytes(StreamDecoder.java:250)
        sun.nio.cs.StreamDecoder.implRead(StreamDecoder.java:289)
        sun.nio.cs.StreamDecoder.read(StreamDecoder.java:125)
        ^-- Holding lock: java.io.InputStreamReader@14a91265[thin lock]
        java.io.InputStreamReader.read(InputStreamReader.java:167)
        java.io.BufferedReader.fill(BufferedReader.java:105)
        java.io.BufferedReader.readLine(BufferedReader.java:288)
        ^-- Holding lock: java.io.InputStreamReader@14a91265[thin lock]
        java.io.BufferedReader.readLine(BufferedReader.java:362)
        weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:289)
        weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:314)
        weblogic.nodemanager.client.NMServerClient.start(NMServerClient.java:94)
        ^-- Holding lock: weblogic.nodemanager.client.SSLClient@14b0b51f[thin lock]
        weblogic.nodemanager.mbean.StartRequest.start(StartRequest.java:75)
        weblogic.nodemanager.mbean.StartRequest.execute(StartRequest.java:45)
        weblogic.kernel.WorkManagerWrapper$1.run(WorkManagerWrapper.java:63)
        weblogic.work.ExecuteThread.execute(ExecuteThread.java:203)
        weblogic.work.ExecuteThread.run(ExecuteThread.java:170)
    >
    ####<Jun 23, 2013 9:20:48 PM IST> <Notice> <Diagnostics> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-000000000000001d> <1372002648300> <BEA-320068> <Watch 'StuckThread' with severity 'Notice' on server 'AdminServer' has triggered at Jun 23, 2013 9:20:48 PM IST. Notification details:
    WatchRuleType: Log
    WatchRule: (SEVERITY = 'Error') AND ((MSGID = 'WL-000337') OR (MSGID = 'BEA-000337'))
    WatchData: DATE = Jun 23, 2013 9:20:48 PM IST SERVER = AdminServer MESSAGE = [STUCK] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "656" seconds working on the request "weblogic.kernel.WorkManagerWrapper$1@14b0b657", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
    Thread-15 "[STUCK] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" <alive, in native, suspended, priority=1, DAEMON> {
        jrockit.net.SocketNativeIO.readBytesPinned(SocketNativeIO.java:???)
        jrockit.net.SocketNativeIO.socketRead(SocketNativeIO.java:24)
        java.net.SocketInputStream.socketRead0(SocketInputStream.java:???)
        java.net.SocketInputStream.read(SocketInputStream.java:107)
        weblogic.utils.io.ChunkedInputStream.read(ChunkedInputStream.java:149)
        java.io.InputStream.read(InputStream.java:85)
        com.certicom.tls.record.ReadHandler.readFragment(Unknown Source)
        com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
        com.certicom.tls.record.ReadHandler.read(Unknown Source)
        ^-- Holding lock: com.certicom.tls.record.ReadHandler@14a90002[thin lock]
        com.certicom.io.InputSSLIOStreamWrapper.read(Unknown Source)
        sun.nio.cs.StreamDecoder.readBytes(StreamDecoder.java:250)
        sun.nio.cs.StreamDecoder.implRead(StreamDecoder.java:289)
        sun.nio.cs.StreamDecoder.read(StreamDecoder.java:125)
        ^-- Holding lock: java.io.InputStreamReader@14a91265[thin lock]
        java.io.InputStreamReader.read(InputStreamReader.java:167)
        java.io.BufferedReader.fill(BufferedReader.java:105)
        java.io.BufferedReader.readLine(BufferedReader.java:288)
        ^-- Holding lock: java.io.InputStreamReader@14a91265[thin lock]
        java.io.BufferedReader.readLine(BufferedReader.java:362)
        weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:289)
        weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:314)
        weblogic.nodemanager.client.NMServerClient.start(NMServerClient.java:94)
        ^-- Holding lock: weblogic.nodemanager.client.SSLClient@14b0b51f[thin lock]
        weblogic.nodemanager.mbean.StartRequest.start(StartRequest.java:75)
        weblogic.nodemanager.mbean.StartRequest.execute(StartRequest.java:45)
        weblogic.kernel.WorkManagerWrapper$1.run(WorkManagerWrapper.java:63)
        weblogic.work.ExecuteThread.execute(ExecuteThread.java:203)
        weblogic.work.ExecuteThread.run(ExecuteThread.java:170)
    SUBSYSTEM = WebLogicServer USERID = <WLS Kernel> SEVERITY = Error THREAD = [ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)' MSGID = BEA-000337 MACHINE = obiee.prod.com TXID =  CONTEXTID = d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-000000000000001c TIMESTAMP = 1372002648290 
    WatchAlarmType: AutomaticReset
    WatchAlarmResetPeriod: 600000
    >
    ####<Jun 23, 2013 9:21:48 PM IST> <Error> <WebLogicServer> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-000000000000001f> <1372002708299> <BEA-000337> <[STUCK] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "716" seconds working on the request "weblogic.kernel.WorkManagerWrapper$1@14b0b657", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
    Thread-15 "[STUCK] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" <alive, in native, suspended, priority=1, DAEMON> {
        jrockit.net.SocketNativeIO.readBytesPinned(SocketNativeIO.java:???)
        jrockit.net.SocketNativeIO.socketRead(SocketNativeIO.java:24)
        java.net.SocketInputStream.socketRead0(SocketInputStream.java:???)
        java.net.SocketInputStream.read(SocketInputStream.java:107)
        weblogic.utils.io.ChunkedInputStream.read(ChunkedInputStream.java:149)
        java.io.InputStream.read(InputStream.java:85)
        com.certicom.tls.record.ReadHandler.readFragment(Unknown Source)
        com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
        com.certicom.tls.record.ReadHandler.read(Unknown Source)
        ^-- Holding lock: com.certicom.tls.record.ReadHandler@14a90002[thin lock]
        com.certicom.io.InputSSLIOStreamWrapper.read(Unknown Source)
        sun.nio.cs.StreamDecoder.readBytes(StreamDecoder.java:250)
        sun.nio.cs.StreamDecoder.implRead(StreamDecoder.java:289)
        sun.nio.cs.StreamDecoder.read(StreamDecoder.java:125)
        ^-- Holding lock: java.io.InputStreamReader@14a91265[thin lock]
        java.io.InputStreamReader.read(InputStreamReader.java:167)
        java.io.BufferedReader.fill(BufferedReader.java:105)
        java.io.BufferedReader.readLine(BufferedReader.java:288)
        ^-- Holding lock: java.io.InputStreamReader@14a91265[thin lock]
        java.io.BufferedReader.readLine(BufferedReader.java:362)
        weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:289)
        weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:314)
        weblogic.nodemanager.client.NMServerClient.start(NMServerClient.java:94)
        ^-- Holding lock: weblogic.nodemanager.client.SSLClient@14b0b51f[thin lock]
        weblogic.nodemanager.mbean.StartRequest.start(StartRequest.java:75)
        weblogic.nodemanager.mbean.StartRequest.execute(StartRequest.java:45)
        weblogic.kernel.WorkManagerWrapper$1.run(WorkManagerWrapper.java:63)
        weblogic.work.ExecuteThread.execute(ExecuteThread.java:203)
        weblogic.work.ExecuteThread.run(ExecuteThread.java:170)
    >
    ####<Jun 23, 2013 9:23:37 PM IST> <Info> <JDBC> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000020> <1372002817371> <BEA-001128> <Connection for pool "mds-owsm" closed.>
    ####<Jun 23, 2013 9:23:38 PM IST> <Info> <Common> <obiee.prod.com> <AdminServer> <MDSPollingThread-[owsm, jdbc/mds/owsm]> <OracleSystemUser> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000003> <1372002818247> <BEA-000628> <Created "1" resources for pool "mds-owsm", out of which "1" are available and "0" are unavailable.>
    ####<Jun 23, 2013 9:38:37 PM IST> <Info> <JDBC> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000029> <1372003717357> <BEA-001128> <Connection for pool "mds-owsm" closed.>
    ####<Jun 23, 2013 9:38:38 PM IST> <Info> <Common> <obiee.prod.com> <AdminServer> <MDSPollingThread-[owsm, jdbc/mds/owsm]> <OracleSystemUser> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000003> <1372003718551> <BEA-000628> <Created "1" resources for pool "mds-owsm", out of which "1" are available and "0" are unavailable.>
    ####<Jun 23, 2013 9:53:37 PM IST> <Info> <JDBC> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000036> <1372004617391> <BEA-001128> <Connection for pool "mds-owsm" closed.>
    ####<Jun 23, 2013 9:53:38 PM IST> <Info> <Common> <obiee.prod.com> <AdminServer> <MDSPollingThread-[owsm, jdbc/mds/owsm]> <OracleSystemUser> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000003> <1372004618870> <BEA-000628> <Created "1" resources for pool "mds-owsm", out of which "1" are available and "0" are unavailable.>
    ####<Jun 23, 2013 10:08:37 PM IST> <Info> <JDBC> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-000000000000003f> <1372005517356> <BEA-001128> <Connection for pool "mds-owsm" closed.>
    ####<Jun 23, 2013 10:08:39 PM IST> <Info> <Common> <obiee.prod.com> <AdminServer> <MDSPollingThread-[owsm, jdbc/mds/owsm]> <OracleSystemUser> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000003> <1372005519176> <BEA-000628> <Created "1" resources for pool "mds-owsm", out of which "1" are available and "0" are unavailable.>
    ####<Jun 23, 2013 10:23:37 PM IST> <Info> <JDBC> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-000000000000004c> <1372006417363> <BEA-001128> <Connection for pool "mds-owsm" closed.>
    ####<Jun 23, 2013 10:23:39 PM IST> <Info> <Common> <obiee.prod.com> <AdminServer> <MDSPollingThread-[owsm, jdbc/mds/owsm]> <OracleSystemUser> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000003> <1372006419447> <BEA-000628> <Created "1" resources for pool "mds-owsm", out of which "1" are available and "0" are unavailable.>
    ####<Jun 23, 2013 10:38:37 PM IST> <Info> <JDBC> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000055> <1372007317361> <BEA-001128> <Connection for pool "mds-owsm" closed.>
    ####<Jun 23, 2013 10:38:39 PM IST> <Info> <Common> <obiee.prod.com> <AdminServer> <MDSPollingThread-[owsm, jdbc/mds/owsm]> <OracleSystemUser> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000003> <1372007319778> <BEA-000628> <Created "1" resources for pool "mds-owsm", out of which "1" are available and "0" are unavailable.>
    ####<Jun 23, 2013 10:53:37 PM IST> <Info> <JDBC> <obiee.prod.com> <AdminServer> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000062> <1372008217362> <BEA-001128> <Connection for pool "mds-owsm" closed.>
    ####<Jun 23, 2013 10:53:40 PM IST> <Info> <Common> <obiee.prod.com> <AdminServer> <MDSPollingThread-[owsm, jdbc/mds/owsm]> <OracleSystemUser> <> <d7ae7ea9bf56ebdc:672b0c54:13f71afc8f0:-8000-0000000000000003> <1372008220313> <BEA-000628> <Created "1" resources for pool "mds-owsm", out of which "1" are available and "0" are unavailable.>
    Where to look for the errors
    Please help, i have searched everywhere, there are no solutions for this.
    Advanced thanks

    If you want to run the EPM weblogic admin server and OBIEE at the same time then you would need for them to run on different ports.
    You don't have to select the essbase option when installing OBIEE if you have already installed the essbase products.
    I would install OBIEE to a different middleware home than EPM and keep the weblogic domains separate.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Jdbc sender adapter  hangs and starts showing "Processing Started" forever

    Dear ,
              We are facing some issues with jdbc sender adapter channel on production system
              Environment : XI 3.0 SP 20 + HP-UX 11.23 ia64 + Oracle 10.2
    Sometimes it hangs and starts showing "Processing Started" forever on communication channel monitoring .
    There is no error log for this.
    If i stop it and then start it , no use.
    If i copied this to a new one then it works.
    I have found few SAP note like 1078420,1083488 , but my system is already at higher patch level.
    Can you please advise me something as we are facing in production frequently.
    Regards,
    Sandeep

    Hi Sandeep,
    This problem even we too faced in our project and thought of many stupid things finally found that the JDBC adapter is LOCKED.
    Check in the Visual Admin >Cluster> "LOCKING ADAPTER"
    we get a option of Display Locks .Check for an entry with
    NAME : $XIDBAD.JDBC2XI
    reset the locks and restart the CC ,now it works fine.
    Note 1083488 - XI FTP/JDBC sender channel stop polling indefinitely(04/04S)
    Thanks
    Sudharshan

Maybe you are looking for

  • How do I sync this adode PDF file ?

    Hi I am new to symbian. I bought my Nokia N97 mini off ebay. I have been on the net and looked at the phone to find out about it since i bought it off ebay and have read the PDF manual. It was purchases 11/06/10. I have a N97mini S60 Version 5 The so

  • Error in XSLT filter.

    Hi All, I have created some XSLT filters to display the XML file as the HTML. It was working fine before. but suddenly there's an error. After applying the XSLT filter to the content. When i clicked on the content to see the output it is throwing   

  • I cannot get back into my eprint account.

    I cannot get back into my eprint account. It will not recognize my password and when I click on "Can't Remember Password" and go to the page where I need to enter my account email address it will not recognize it. It's the same email address that app

  • AR - How to Complete and Incomplete a Transaction

    Hi, We have a requirement, where after a transaction is created by AutoInvoice, we want to make the Transaction Incomplete, so that it cannot be posted to GL. Send the Transaction for some approval and once approval is obtained, make the Transaction

  • Synchronize acting up

    Folks, I have an annoying problem with synchronize. I keep a LR ctalog that is fully synchronized with my physical image folder. When I add images I run sync, and the LR ctalog is usually up to date. But I renamed one folder containing some 40 images