Maintenance Wizard vrs TUMS

In the R12.1.1 Upgrade Guide it mentions both TUMS and the Maintenance Wizard as means to pre-determine the upgrade steps specific for my environment.
TUMS outlines the steps I do NOT need to do whereas Maintenance Wizard gives a step by step outline of what is required in my environment.
Is TUMS complementary to the Maintenance Wizard or an alternative to it ? Which proves more useful ?
What's folks experience of the Maintenance Wizard rather than just going through the upgrade guide ?
thanks,
Jim

Looks like I need some help on the patch downloading in 2.18 as well. I ran the utiltity to make sure my MOS login was correct but the patch dowlonad is not working in the Prep for Upgrade/Create Merged patch for Rel 11i - Part 1. I've also tried downloading a patch by itself in the utilities but it won't work either. The errors reported don't tell me much but the log says to have to have the admin run the command manually. When I do I'm getting a java exception. Do you have any idea where I can start troubleshooting this?
cat get_from_url_1704_5259121.sh
/u01/mwiz/mwizdb/10.2.0/jre/*/bin/java -Dbug_number="5259121" -Daction="download_file" -Dplatform="46" -Ddownload_directory="./" oracle.support.mw.AruExecutor
ls -l p5259121_11i_.zip
[oramwiz@hntbw540d INSTANCE_1704]$ ./get_from_url_1704_5259121.sh
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/support/mw/AruExecutor
ls: p5259121_11i_.zip: No such file or directory
UPDATE: Found another log that said to run the https command manaully. Here is what happens when I do that. Note: I edited the parts with my email in them.
https://updates.oracle.com/Orion/XMLAPI/download_patch/p5382135_11i_GENERIC.zip?aru=8623346&email=<myemailhere>&userid=O-<myemailhere>&patch_file=p5382135_11i_GENERIC.zip
[1] 26587
[2] 26588
-bash: https://updates.oracle.com/Orion/XMLAPI/download_patch/p5382135_11i_GENERIC.zip?aru=8623346: No such file or directory
[3] 26589
[1] Exit 127 https://updates.oracle.com/Orion/XMLAPI/download_patch/p5382135_11i_GENERIC.zip?aru=8623346
[3]+ Done userid=O-<myemailhere>
Edited by: user649511 on Feb 24, 2011 2:30 PM

Similar Messages

11i to R12 upgrade and Maintenance Wizard and the Maintenance Wizard Forum

MetaLink doc 215527.1 recommends using the Maintenance Wizard to upgrade from 11i to R12.
The Maintenance Wizard is extolled elsewhere in this Forum to replace the Upgrade Spreadsheet.
And it is referenced a couple times in the 11i forum.
But that's not much press considering Oracle's description below.
Also, all the Maintenance Wizard MetaLink docs below reference a Maintenance Wizard forum.
The forum contains excellent feedback including how to use Maintenance Wizard within a firewall.
LCM: Maintenance Wizard
But the Maintenance Wizard forum was Archived ~two weeks ago.
Some clarification would sure be useful.
What I'm actually trying to confirm is exactly what OAS or iAS or OC4J to use with it.
Thanks in advance to anyone who can help!
From 215527.1:
Oracle Support provides Maintenance Wizard to guide you through the upgrade of Oracle Applications technology stack and products from Release 11i versions to Release 12. It draws on instructions from numerous manuals and other documentation to provide you with a complete picture of the activities required for an upgrade.
Maintenance Wizard helps you to reduce upgrade tasks by dynamically filtering the necessary steps based on criteria it obtains from your Applications environment. The resulting report is a set of step-by-step instructions of exactly what you need to do to complete your specific upgrade, including any critical patches that your system may require. It can also automatically execute many of the tasks for you, so as to reduce the possibility of errors or accidental omission of vital tasks.
These MetaLink documents reference the Archived Maintenance Wizard Forum
434387.1 - Maintenance Wizard Data Sheet
215527.1 - Maintenance Wizard Overview
430732.1 - Maintenance Wizard Downloads
329476.1 - Maintenance Installation Instructions
430734.1 - Maintenance Wizard Users Guide
405263.1 - Maintenance Wizard FAQ
406917.1 - Maintenance Wizard Training
418301.1 - Maintenance Wizard Webcast

FYI,
I am investigating what happened to the Maintenance Wizard forum. I was not alerted or consulted before it was moved to an "archived" location.
I will provide an update here once I find out how to get the situation corrected.
In the meantime, please use the other support channels (this forum, FAQ, iTAR's, etc.) for Maintenance Wizard questions and problems.
Sorry for the inconvenience.
-Vikki
Product Manager for the Maintenance Wizard
PS - To answer Tom's imbedded question (What I'm actually trying to confirm is exactly what OAS or iAS or OC4J to use with it.), please look at the Installation Guide (note 329476.1). In step 2 of the prerequisites, it states:
Maintenance Wizard version 2.x requires Oracle RDBMS 10g (10.2.0) with 10g iAS (10.1.3).
Hope this is what you needed, Tom....

EBS upgrade from 11i to R12 using Maintenance Wizard question

I have installed Maintenance Wizard in development envrionment. I picked module to upgrade 11i to R12. When I am defining the node it not only picked up 11i nodes but required me to configure R12 nodes. So Do I have to to create upgrade file system(for R12) and then configured R12 nodes in Define nodes? My configuration is in In configuration at this time as I did not configured R12 nodes.
Please help me resolve this issue.

My question is which database oracle_home we have to consider to upgrade R12? and What about another one oracle_home?
When you run Rapid Install, provide the details of the already upgraded/installed 11.2.0.3 ORACLE_HOME.
For 11gR1 ORACLE_HOME which is installed by Rapid Install, please see (How to upgrade Oracle E-Business Suite from 11i to 12.1.1 and keep the existing 10g Database? (Doc ID 1345020.1)).
Thanks,
Hussein

Is there a way to use the Maintenance Wizard with a .profile file...

Good afternoon all...
In my environment we have the same applmgr account for multiple databases. The .profile delivers a menu that allows the user to pick which database they wish to work with, and then a script runs which changes the environment specific variables for the desired database.
In many environments I have worked in the .profile is used to setup environmental variables for the applmgr account.
In looking at the instructions for setting up Maintenance Wizard it says to ensure ssh or rsh access to each of the applications servers using the applmgr account, and removing any .profile or .login scripts. This is not viable in my environment.
In asking on metalink I was told 1) just ignore the ssh setup stuff; and 2)the ssh setup is essential for maintenance wizard to work. Clearly conflicting advice.
How can I install/implement maintenance wizard without the loss of my current .profile configuration?
Please advise,
Adam

Oracle support's assessment was that that there is no way around the requirement to use ssh/remsh, I did a bit of further research into the issue. I developed a resolution for hpux as follows...
I used ssh rather than remsh for my shell and created a conditional statement in my .profile to handle the issue...
# Set environment script if not secure shell -- 100311 MAC
if [ -n "$SSH_CLIENT" ]
then
#Set up the shell environment
set -u
trap "echo 'logout'" 0
umask 012
else
#Set up the shell environment
set -u
trap "echo 'logout'" 0
umask 012
# Set up Oracle environment
. /usr/local/bin/envch
fi
The conditional uses -n for not null, or in other words it is True if the variable is defined but false if it is not.
The variable $SSH_CLIENT is defined when logging in through ssh, but undefined when using another terminal method.
If it is an ssh shell I still setup other environment variables, but I have to move the "set -u" line to a result of the conditional as placing it before the conditional will make the -n test condition invalid. (It will cause references to an undefined variable to return an error rather than null). If it is not an ssh shell I again setup the variables but also call the interactive component of the login as it's own script.
I have tested this successfully and will now move on with the rest of the maintenance wizard installation.
Thank you,
Adam

How to change the sysadmin password for maintenance wizard if you have forg

How to change the sysadmin password for maintenance wizard if you have forgotten the password and can't log in.

Log into SQL*Plus as the $EOFUSER and do:
update eof_user set password = 'passwd_you_want' where user_id = 0;
commit;
-Vikki
Product and Development Manager for Maintenance Wizard

New Maintenance Wizard released for Upgrades to R12!

Maintenance Wizard Version 2.01 was released on 31-MAY-2007!
<BR><BR>
This new version includes the path to Upgrade to Release 12 and many new or enhanced features. It is a FREE tool for all customers with valid support contracts!
<BR><BR>
For more information, please visit MetaLink Note 215527.1.

Akshaya,
The patch should be available now. Have you visited note 430732.1?
If you click the download there and provide your MetaLink username and password, you should be able to download it.
Hope that helps!
-Vikki

Maintenance Wizard Installation on more than one box.

Hi,
We are in the process of installing the Maintenance Wizard, to help us on our EBusiness upgrade. As a current, policy we avoid installing App server and database on the same machine (it also applies for MW installation).
The only part where something similar is mentioned is on the FAQ. But I'm not sure if the installation is supported having one box for the database and one box for the App server. Can anyone help me on this topic?
Thank you.
JoseLuis

Duplicate post ..
Re: Installing MW on different machines.

Maintenance Wizard appears to hang: Execution Started: Please Wait

I have a customer using the following navigation route through Maintenance Wizard:
Process: Prep for Upgrade
Select: Task:Apply AD Minipack
'Start the Run'
However the next page seems to hang with:
Script Executer: Execution Started
'Confirm that "Execution Complete"message appears at the end of this page.'
Please Wait.
Can anyone advise what could be the problem or how to get additonal errors to diagnose the problem.

It took about 8 seconds for me. Not too bad at all.
Jo
"crazykeith" <[email protected]> wrote in
message
news:g0c7rs$d27$[email protected]..
> Hello. I'm trying my first Flash Video insertion..all is
well except I'd
> really like to be able to tell anyone viewing the page
to please hang on
> and
> wait during the buffer period on the progressive
download. it takes
> anywhere
> from 5 to 20 seconds for the player skin to appear and
start playing the
> video.. I have previously been using embedded WMP which
seems to have an
> advantage in this department since the player skin would
immediately
> appear and
> display a buffering video % which would let anyone
viewing the page know
> that
> the video is downloading and is about to play. With the
flash they have
> no
> idea and the page appears not to be working for a "long"
time (5 to 20
> seconds)
> since not even the skin appears. Is there a way to
improve these faults?
> My
> video is about 3 minutes long and can be found here.
>
http://www.centroidcnc.com/cncvideo/cnc_cylinder_head/cnc_cylinder_head_porting.
> html
> thanks ahead of time for any advice! -Keith
>

Encountered the error while installing Maintenance Wizard 2.18

Hi,
I'm trying to install Maintenance Wizard on 11.1.0.6 RDBMS home. I encountered the following error :
create_enc_wallet
Calling mwwmpro.jar....File /u01/acc/oramw/product/11.1.0/db_2/eof/config/encr_wallet/cwallet.sso does not exists.
Installation error:
Error Creating Wallet for password encryption
I've checked in the path /u01/acc/oramw/product/11.1.0/db_2/eof/config/encr_wallet & there are no files in it.
/u01/acc/oramw/product/11.1.0/db_2/eof/config/encr_wallet
[oramw@proddb01 encr_wallet]$ ls -a
. ..

I checked the logfile & found that the location of the jar file was incorrect. I made the changes in the script & re ran it, It worked.

ORA-01017 error, when running Complete configuration of Maintenance Wizard

Hi Gurus,
Maintenance wizard version: 2.19 (latest)
DB: 10.2.0.1
Linux:
Upgrade assistance for R12
Im trying to complete the first step:
1-Complete configuration of Maintenance Wizard (Required)
It gives me errors:
Checking that Remote EOF_HOME is only a directory name, not a path...
ERROR:
ORA-01017: invalid username/password; logon denied
SP2-0640: Not connected
SP2-0670: Internal number conversion failed
Usage: { EXIT | QUIT } [ SUCCESS | FAILURE | WARNING | n |
<variable> | :<bindvariable> ] [ COMMIT | ROLLBACK ]
** ERROR!!! **
** Project node configuration has FAILED with the problem(s) below:!!! **
** Invalid value for REMOTE_EOF_HOME.
** Solution: Remove all slashes in the value for REMOTE_EOF_HOME.
** The value must be a simple directory name, not a path.
** Please have the Project Administrator return to the Modify Project
** screen, change the value for REMOTE_EOF_HOME and re-run Step
** 1 of the Configuration category.
** DO NOT PROCEED WITH ANY OTHER STEPS UNTIL YOU RESOLVE THE PROBLEMS SHOWN **
** ABOVE. ALL OTHER STEP EXECUTION DEPENDS ON A SUCCESSFUL PROJECT NODE **
** CONFIGURATION. **
** ONCE YOU HAVE RESOLVED THE PROBLEMS SHOWN ABOVE, YOU MUST RE-RUN THIS **
** STEP AGAIN. **
I've checked all the forums before posting. Please advise
Thanks & Regards,
Rv
Edited by: Kiran Jakka on May 11, 2012 8:05 AM

Yes this is what I do, but still receive "Insufficient privileges to write to that location". So I am forced to use normal file system to be able to continue.
After that I run into the current problem saying OMS configuration failed (see details....) and I try:
./opmnctl startall
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=uxlpgrid01:6200
3 of 5 processes started.
ias-instance id=EnterpriseManager0.uxlpgrid01
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
OC4J/home/default_island
Error
--> Process (pid=0)
no port available from the port range
failed to start a managed process after the maximum retry limit
no port available from the port range
no port available from the port range
Log:
none
ias-component/process-type/process-set:
OC4J/OC4J_EMPROV/default_island
Error
--> Process (pid=0)
no port available from the port range
failed to start a managed process after the maximum retry limit
no port available from the port range
no port available from the port range
Log:
none
Then:
./opmnctl status
Processes in Instance: EnterpriseManager0.uxlpgrid01
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | N/A | Down
HTTP_Server | HTTP_Server | 23861 | Alive
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | 27021 | Alive
OC4J | home | N/A | Down
OC4J | OC4J_EM | 10403 | Alive
OC4J | OC4J_EMPROV | N/A | Down
WebCache | WebCache | 23872 | Alive
WebCache | WebCacheAdmin | 23863 | Alive
Overwhelming :-(
Thanks for helping
Askia.

Maintenance Wizard 2.20 Not showing any images and Style

We have installed Maintenance Wizard 2.20 on the RHEL 5 linux server, we are accessing the application through IE9 browser. I have completed the browser settings provided by the MW disclaimer. But i couldnt see any images or CSS in the screen. I can able to login and navigate through all the screens.
Please help me in this issue.
Sundar

Hi DB,
The steps for the upgrade itself can also be found in:
Oracle® Applications
Upgrade Guide
Release 11i to 12.1.1
http://docs.oracle.com/cd/E18727_01/index.htm
and depending at the type of OS you need to follow:
Note 761564.1 - Oracle Applications Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86
Note 761566.1 - Oracle Applications Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64
Note 761568.1 - Oracle Applications Installation and Upgrade Notes Release 12 (12.1.1) for Sun Solaris SPARC (64-bit)
Or in case you have another platform let me know.
Regards,
Ronald

Regarding Maintenance wizard

Hi,
We are planning to install and configure Maintenance Wizard for our R12.1.1 instance.
I am confused about the pre-reqs. Somewhere it mentions that we need to install RDBMS Oracle Home + iAS Oracle Home.
However, the note 329476.1 which details the installation procedure, nowhere mentions anything about iAS Oracle Home.
We are planning to install the latest MW(patch 8912211) as described in Note: 430732.1
Please help me with your inputs.
thanks.

Hi;
I am confused about the pre-reqs. Somewhere it mentions that we need to install RDBMS Oracle Home + iAS Oracle Home.
However, the note 329476.1 which details the installation procedure, nowhere mentions anything about iAS Oracle Home.
We are planning to install the latest MW(patch 8912211) as described in Note: 430732.1
If you want to apply patch 8912211 you should follow How to Perform a LivePatch [ID 291887.1] whish is also descripe in readme part. I suggest follow note How to Perform a LivePatch [ID 291887.1], it show what you have to do
Regard
Helios

Is there any plan to have Maintenance Wizard on Windows platform?

I am planning to upgrade our 9i/11.5.10.2 to 11g/R12 on Win2000. The client doesn't have UNIX/Linux in the shop. It seems we can't use Maintenance Wizard for the upgrade. Is there any plan to have Maintenance Wizard on Windows platform?
Thanks,
Jenny

Jenny,
We have considered this many times over the lifetime of the MW, but it seems the demand is never great enough. We hear from about 2-3 customers a year who would like to see this feature. It came back very low in the "desirability" ratings from our MW survey last year.
So I'm sorry to say that there is no plan to make MW installable on a Windows box at this time.
(It can be used for customers with Apps nodes on windows, but with the caveat that you lose automatic execution... See the FAQ, note 405263.1, for more details.)
-Vikki
Product and Development Manager for the Maintenance Wizard

What does "Remote EOF_HOME" in Maintenance Wizard Refer To

We are trying to set up Maintenance Wizard 2.18 to do an 11.5.10.2 to R12.1 migration and cannot figure out what the value of "Remote EOF_HOME" should be or where it gets created..
I want to know exactly where that directory will be created. What it is used for would also be nice to know so I can make sure it has enought space.
Thanks in advance!

Samuel,
Also note that there is a more detailed description of every one of the Node Attributes available right in the Define Nodes attribute screen. Just to the right of the field itself, there is a small "i" icon inside of a bubble. Clicking on that icon will show you more information to assist you in populating the attribute with the correct value.
-Vikki
Product Manager for the Maintenance Wizard

Maintenance Wizard Version : 1.28 - Seed Information?

Hi,
I'm using version Maintenance Wizard Version : 1.28
Specifically:
Maintenance Wizard Version : 1.28
Component Product Release ...
Applications Database Upgrade Assistant 9i : 1.20
Maintenance Pack Assistant for 11.5.10 : 1.28
Upgrade Assistant for 11.5.10 : 1.23
Applications Database Upgrade Assistant 10g : 1.12
Upgrade Assistant for 11.5.9 : 1.09
Shouldn't the option to upgrade to r12 be present under the Product field when adding a Project?
Or, am I mis-interpreting the demos ?
It also does not offer the option to utilize the AutoConfig files for Adding Node configuration information.
Could some of my Seed data be out of synch?
Any assistance is Appreciated!
Murph

Hi, Murph,
No, you're seeing exactly what you should be seeing on any version of the Maintenance Wizard that starts with "1." That's the OLD version (which we're trying to phase out), and is only used for upgrade to 11.5.10.2 or 10g, etc.
The new versions begin with "2.", and can be obtained by clicking on the Downloads link of note 215527.1. The new version currently contains both the R12 upgrade, and the 10g DB upgrade for Apps.
Eventually, 2.x will contain one or two additional products that were present in the old 1.x version, and at that time, the 1.x versions will be desupported.
I hope that clears it up! :-)
-Vikki
Product Manager for the Maintenance Wizard

Maintenance Wizard vrs TUMS

Similar Messages

Maybe you are looking for