Maitenance Optimizer in solman 7.1

Hi Experts,
Could you please let me know how to configure Maintenance Optimizer in Solman 7.1.
I have completed system Preparation, Initial configuration and also managed system configuration using Solman_setup.
I can see the Optimizer from Solman_workcenter, but couldn't see all the systems in drop down list to calculate the support pack stack for each and every system ( like ECC, EP, etc). Your help is appreciated.
Thanks
Mounika

Hi Mounika,
As long as you completed solman setup -> system preparation and basic configuration, MOPZ is ready to use. To generate the stack xml file, you need to assign your SAP System to the correct Product and Product version. After that assign your SAP System to the correct logical component, and subsequently add into the solution landscape.
To use MOPZ in SOLMAN 7.1, go to solman_workcenter -> change management and you'll see Maintenance Optimizer at left side on your screen.
Hope it helps,
Cheers,
Nicholas Chang

Similar Messages

Setup guide for Maintenance Optimizer in solman 7.0 ehp1 sp18

Hi All ,
Please let me know the exact link where I can find the setup guide for Maintenance Optimizer in Solman 7.0 EHP1 sp18 .
I found a few guides but was not able to locate the correct guide for this particular version.
Thanks
Sunil Kumar

Hi Sunil,
EhP1 for Solution Manager means you have at least SPS18. Therefore documentation based on EhP1 is still valid, although Maintenance Optimizer has been updated as of SPS22+
You can refer to this guide: https://websmp106.sap-ag.de/~sapdownload/011000358700002003492008E
And also this help documentation: http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm
Regards,
-Rohan

Maintenance optimizer configuration Steps

Dear All,
I am stuck with Maintenance optimizer configuration.
Can somone provide a usefull link for the same i am using SOLMAN 4.0 with SP 15.
Best of regards,
Gaurav Sood

Hi ,
Here are the steps :-
MAITENANCE OPTIMIZER STEPS
1) Create the system in solution manager (Tr.code-SMSY)
2) For this System to create the rfc destinations.
3) Create the logical component for system.
4) Maintain technical settings of OSS in the transaction code: OSS1
5) In TR code AISUSER maintain the user and OSS id
6) In DSWP transaction codeu2014in settings-global settings have to maintain OSS id and Password.
7)go to tr code DSWPu2014changemanagementu2014support packagesu2014click on maintenance optimizeru2014select the systemu2014continue-confirm files in download basketu2014complete transaction.
Thanks
Abullais

How to approve the packages using solman

Hi Friends
I have Installed a Solution manager 7.0 version.
Now for my scenaris I have to download packages from SMP ERP stack 11 for ECC 6.0 system
The packages ask for approval.
How can I configure this by solman system that my packages are downlaoded in ECC system from SMP via solution manager system.
I am using Solman 1st time to downlaod packages.
Thanks and Regards
Pooja

Hi
Have you configured Maintain Optimizer in Solman,this is mandatory if you want to download support pack stack for ECC6 or any other SAP versions
configure the maintenance optimizer in solution manager using the following weblog
/people/issacnolis.ohasi/blog/2008/01/04/upgrade-sessions-whats-sap-solution-manager-maitenance-optimizer
Also check note:1024932 & 1032322
If you have already configured MO then
Log on to your SAP Solution Manager system and start transaction DSWP (or SOLUTION_MANAGER). In the left frame, select Solution Overview>Then, choose the tab Change Management.>Choose Maintenance Optimizer-->Choose Create New Maintenance Transaction
You need to maintain your S user ID through AISUSER tcode before that.
Then you can directly move files to your download basket, after confirmation
www.service.sap.com/rkt-solman->select solution Manager 7.0>technical Role-->Technolagy
&system administartion just drill out there you can find lot of simulator
Regards
Uday

Error Maintenance Optimizer

Hi, I try download SPS for system SAP GRC Access Control 5.3 but in the step 2 "Select File" in Maitenance Optimizer show message error:
Transaction must be assigned to a Standalone Product Version!
Message no.MOPZ_CHECKS229
In the combo box Select Target not show Stack Details.
help, please
Best Regards,
NW

Hi, I try to assign the SAP ERP 6.0 Product version in SOLMAN LMDB transaction to SAP ERP6 EHP7 system. I am getting error below screenshot.
SAP Details:
ERP 6 EHP 7
Release Version - 740
SP - 02
Thanks
Srinu T.

Error when Launching the Maintenance optimizer

Hello,
When launching the Maintenance optimizer of solman 7.1, in the step Cionfirm Target i got the following dump:
The followin error text was processed in SD1 the systm: Value loss during allocation.
The error occurred on the application server SD1ODYLSV1_SD1_00 and in the work process. 9
The termination type was: RABAX_STATE
The ABAP call hierarchy was:
Method: GET_2ND_CHECK_RESULT of program CL_MO_SMP_ADAPTER=============CP
Method: LOAD_IMPACT_ASC of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
Method: IF_COMPONENTCONTROLLER~LOAD_IMPACT_ASC of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
Method: ONACTIONLOAD_IMPACT of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: IF_WDR_ACTION~FIRE of program CL_WDR_ACTION=================CP
Method: DO_HANDLE_ACTION_EVENTS of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
In the trace file of the Work process teh following error was found:
A ABAP Program CL_MO_SMP_ADAPTER=============CP        .
A Source CL_MO_SMP_ADAPTER=============CM00A      Line 19.
A Error Code CONVT_DATA_LOSS.
A Module $Id: //bas/720_REL/src/krn/runt/abxacnv.c#4 $ SAP.
A Function ab_xaCloseSimpleR Line 725.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A exceeded soft limit for RUDILOCKS (user: SAPADMIN    , ta:                     )
I tried to find something about the *RUDILOCKS * without success.
Do you have any suggestion to resolve the issue?

Hi,
Check SAP note 1505832.
Thanks
Sunny

Configure Manintainance optimizer

Hi All,
I am new in sap basis.
can any one tell me how to Configure Manintainance optimizer on Solution manager 7.0.
If any one have step by step configuraton guide for solution manger 7.0 please post it or give me some good link where i will get help.
your help on this wil be higly appriciated.
Thanks in advance
Regards
S Kumar

Hello Kumar
STEPS to Configure MOPZ. With SR3
1.     Make an RFC connection to TARGET system from SOLUTION MANGER in sm59.
2.     Go to t-code SMSY and create Logical Component.
Enter the detail of LOGICAL COMPONENT NAME ZXXXXXXX
3. Go to T-code SMSY select the system for which we have created the Logical Component and generate the RFC connections.
In the above screen Header date enter Hostname and Instance number
In the above screen go to client tab and provide the details of the client.
Now if you check after the RFC connections generated it will pull instances and software components automatically.
Go to T-code Solution_manager OR dswp or solutionmanger
From the above screen click on Create.
Give a name for your solution click on continue after that.
Once you click on continue you will find BI landscape in SOLUTION OVERVIEW.
Click on SOLUTION LANDSCAPE MAINTENANCE .
You will come to this screen above once you click on solution landscape maintenance here go to the dropdown and select the logical component which we have created for BI LANDSCAPE i.e. ZBIDEV
Select and click on continueu2026
Then go to Tcode SMSY select the system you have define and click on Assign ment   to logical component (CAUTION permanent license has to be installed)
Go to tcode AISUSER this is used to define the SUSERID to log in to service.sap.com
For the user to work you need to make a connection RFC through SAP ROUTER
To make the RFC connection get the router details were SAP router is running check the screen shots below to get router info:
Go to tcode oss1
From the menu select paramerter and click technical settings
Make a note of SAPROUTER @ SAP ip address and the name.
With the above information make an RFC connection from SM59 how to do that?
Select SAP-OSS
Enter the Target System
Message Server information
Group
Select IP address
Mention the Client as 001
Under USER: Provide the S-User Id and the password through which you are connecting to market place to download the software.
Then, check if the connection is successful. If the connection fails, then check whether your SAP ROUTER is running or not.
Go to the server where SAP ROUTER is configured and execute SAPROUTER u2013r.
Go to T-code Solution_manager or DSWP and select your landscape
Select Maintenance Optimizer from Change Management Tab
Click on Create New Maintenance Transaction
Select the System from the drop-down and Continue the on screen instructions.
Also use the following link for AP Solution Manager Maitenance Optimizer
UPGRADE SESSIONS: What's SAP Solution Manager Maitenance Optimizer?
Hope the above steps are useful.
Regards,
Satish.

Maintenance Optimizer, approval step of download basket

Hello!
Im trying to download an update for our portal from the SAP web site, using download manager. But i can't get the file in download because this one has to be approve. I ve seen that this is done in Solution manager, but i can't find how to do it.Does someone know the step to solve this probleme?
Thanks & Regards
Chris

Hi,
Have you setup maintenance optimizer?
The first Pre-requisite to setup maintenance optimizer is
SOLMAN to be
SP10
Also check these
[Tutor|https://websmp201.sap-ag.de/~sapidb/011000358700006477102006E.sim]
[Note|https://websmp201.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1024932&_NLANG=E]
This will solve your problem.
Feel free to revert back.
--Ragu

Security Optimization - Self Service

Hi There ,
I am trying to reproduce a "howto" document regarding SECURITY OPTIMIZATION WITH SOLMAN.
I was able to run ST14 in the analyzed system and sent it to SolMan. But I do not find the way to find the "Security Optimation - Self/Service" option in SolMan in order to see or load the ST14 results.
(The version of ST-ICO is 150_700)
I will appreciate any idea
FedeX

Thanks Paul,
I was trying this part :
On Solution Manager you can see this data in the Service Session.
DSWP > Service Plan >Self Delivered Services > System Security Optimization > SDCCN Data
Then you can view in Session Workbench, create your questionniare, etc.
But I do not get shown the option "System Security Optimization"
The option list that I get under Service Plan is
SAP Delivered Services | Self Delivered Services | Service Channel | Certificates | SDCCN Data | Graphics
when I select Self Delivered Services I get like the column of a report with the following colums
Service I Status I Planned on I Project I Milestone
btw I also try SDCCN Data option but there is like a kind of criteria for report there (Selection criteria)
Some idea how to get the option System Security Optimization displayed ?
Thanks in advance
FedeX

Solution Manager 7 EHP1 - Implimentation Help

Dear All,
I am new to Solution Manager.
I have install Solution Manager 7 EHP1 (ABAP+JAVA) on windows 2003 and applied later SP stack 24 available at Market place.
We have SAP ECC 6, ABAP stack (we have not install JAVA stack for DEV/QAS or PRD Servers).
On ECC 6 out landscap is DEV->QAS->PRD.
Now after installing Solution Manager 7 EHP1, I have done automatic configuration using SOLMAN_SETUP i.e. upto BASIC CONFIGURATION successfully.
Initially I want to use solution manager for
1. Support Patch Approval
2. SAP Note download
3.Service Desk
Now where and what I need to configure my DEV/QAS/PRD system to use above solution
Thanks in advance,
Nirav

Hi,
Did you add your ECC landscape DEV/QAS/PRD in solution manager smsy?if not that would be first step to proceed.
1: Support patch approval check these links,you need to configure these in Solman system
https://websmp206.sap-ag.de/~sapidb/011000358700000086852008E.sim
www.alphasirius.com/Configuring_Using_MaintenanceOptimizer.ppt
/people/issacnolis.ohasi/blog/2008/01/04/upgrade-sessions-whats-sap-solution-manager-maitenance-optimizer
2. SAP Note download
These setting can be done in individual system by configuring OSS connection to SAP
3:3.Service Desk
/people/bruyneel.guillaume/blog/2008/05/02/service-desk-implementation-guide-part-i
/people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii
Regards
Uday

Pre Requistes for to start Ehpi

Hi,
We have SAP ECC 6.0 with patch level 09(i.e Basis at 09 , ABAP at 09 , APPL at 06).
We have upgraded our solman to Ehp1 and the maitenance optimizer is configured.
Can i Directly start the installation of the EHp4 with ehp installer and it will also do the stack update or first i have to update any patches in ecc6 system then i have to start Ehpi.
Thanku

Hi Kumar,
You can do directly from here. For more information check SAP Note 849887 - SAP ERP 6.0: Support Package Stacks
Release and Info Note
Thanks
Sunny

SAP Solution Manager ABAP or JAVA or ABAP+JAVA ?

Hello.
I want to install Solution Manager for use Maitenance Optimizer ( accept download baskets, configure other SAP system, support packages ...).
I wanted to know if installing ABAP instance is enough? or I have to install Java also?
Regards,
Amit

Amit,
SAP Solution Manager is separate application. You need ABAP+Java stack to use Maintenance Optimizer.
Please read documentation from following link
[http://www.service.sap.com/solutionmanager]
Best Luck,
Digesh Joshi

Create Change Request and Assigned Transaction Button in Solution Directory

These buttons are available in our sand environment, but not in production. Does anyone know where these buttons came from (support pack, note, enhancement, etc.)?

Thanks Kiran,
In fact, I'm using TCode solution_manager but I don't see "maintenance optimizer".
I think it's because I have ST400 SP7 and I have to update to SP9 according to this blog [/people/issacnolis.ohasi/blog/2008/01/04/upgrade-sessions-whats-sap-solution-manager-maitenance-optimizer|/people/issacnolis.ohasi/blog/2008/01/04/upgrade-sessions-whats-sap-solution-manager-maitenance-optimizer]
Mik

Technical Upgrade using Solution Manager

Hi All,
I am aware of the Maintainence Optimizer in SolMan to download Support packages/Enhancement Packages. Does the solution manager support a technical upgrade of a system as well? Please provide your suggestions. I was not able to find any information regarding this and am not if this is even supported.
Thanks in advance,
Srikishan

Hi
You may want to visit the upgrade road map information is available in this link
https://websmp206.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000633637&
Cheers,
Sh

Kernel version false by Downloading SP's

Hi
By downloading the SP's Package Satck and the OS/DB dependadnt files via Maintenance Optimizer in SolMan, I noticed that the proposed Kernel version is false.
In the status of my SAP system, the SAP Kernel is indeed a Non-Unicade version
The proposed (via Maintenance Optimiser) is a Unicode version.
Is something going wrong with the maintenance optimizer ?
or should I take the proposed Kernel version ?
I will be gartefull for your help.
Kind Regards
Latif

Hello Latif,
Nothing wrong with MOPZ, you just need to 'check' Non-unicode version of kernel while calculating the stack via mopz. Means you need to select non-unicode and you will get non-unicode kernel with stack instead of unicode one.
Try once more and try to observe the options where you choose db/os dependent files.
Thanks

Maitenance Optimizer in solman 7.1

Similar Messages

Maybe you are looking for