Maitenance Plan - Number range not defined

I am trying to create a maintenance plan from a brand new system. When going to IP31 I get the error, number range not defined. So I went to SPRO and transported the number ranges. It still would not create a maintenace plan and got the same error. Am I supposed to assign the categories to the Maitenance plans number ranges? If so, how do I do this?
Your help is appreciated.

Hi,
There are two relevant number ranges - One for maintenance plan and the other for maintenance item. Customizing as follows:
-Plant Maintenance and Customer Service
-Maintenance Plans, Work Centers, Task Lists and PRTs
-Maintenance Plans
> >Define Number Ranges for Maintenance Plans
> >Define Number Ranges for Maintenance Items
Alternatively use transaction IP20 and IP21.
In the case of maintenance plan number range you must assign each category to a particular number range. Use the icon 'change groups' to do this.
-Paul
Please use [Enterprise Asset Management (EAM)|Enterprise Asset Management (SAP EAM); forum for PM/CS specific topics

Similar Messages

Order number range not define

Hi Experts,
when i create a production order system generate error massage " NUMBER RANGE NOT DEFINE ".
I have maintained OPJH (Number range also) and i have maintained CO82.
and order type also assign to number range group .
when i create production order in particular plant(1100) with same order type(PP01) then generate a error massage but when I create production order in other plant(2100,3100,4100) with same order type (PP01) then not a problem.
OPJH, OPJK, OPU3, OPL8 also maintained in this plant(1100) for this order type
Please suggest me
Thanks in advance............................

Please do the following
1. Double check in CO82-> Change number groups -> Double click the Production order type (PP01) change the number range & save.
2. As you specified its working well for the other plants 2100,3100,4100. Please check in OPL8 whether the plant 1100 is assigned to the specific order type or not. But CO82 is not plant specific its global change of number ranges for all the plants.
3. Finally if you are trying this with in development system, check with the basis whether the transport reqeust will take time to update.
Check and revert back.
Regards,
Sundhu

Number range not defined

Dear Sir,
When i creating production order in CO01 error is coming number range not defined.
Guide me where we defined number range for production order.i have maintained in co82
but the issue is not solved.

Go to OPJH
select your order type
And select the number range in Order type
select you order type and assign in Number range group
and then create a new order
Or Go to Co82
select Group
Your order type is in Not assigned
select your order and assign to group

Release rejected - Number Range not found.

Hi,
Iam creating a Rework Order RW01 order type.settings are almost same as PP01.
When I try to release the order it shows Release rejected and check log .
In the log I find below message thrown.
" You must enter the batch for material XYZ
*Message no. CO691"
However when I the enter the batch manually add try to release it again it shows Release rejected and check log .
In the log I find below message thrown.
" Number range not defined
Message no. 26023
Diagnosis
You have enter number range for the document type, but this number range is not defined for the number range object "document".
Procedure
Check in Customizing (Document management -> Control data -> Number ranges) which number ranges are defined.
If you want to enter a number range that has not been defined for the document type, contact your system manager. It may be necessary to create a new number range."
I have done the number range for order type RW01 in CO82 as well .
Is there anything I miss in Order Type configuration or Batch Management.
In PP01 order type my Batch updates when I release my order , Same setting is for RW01 as well.
Production Scheduling profile is also same for both.
Regards
Bhgl

Dear,
Please check the number range in CO82 or OPJH for your order type RW01.
Also check the component has determine the batch.
In the release control is set to user to decide (TCO11-FRBATCH = '1') or release despite of missing parts (TCO11-FRBATCH = '2') in Transaction OPJK
For all these components it is stored in the material master that a batch determination should be executed before or during the release (KZECH = '1' manually, KZECH = '3' automatically) and no batches have yet been assigned to these components before the order is saved.
Regards,
R.Brahmankar

Error in ME59N- Internal number assignment not defined

Dear Gurus,
I am getting error while creation automatic PO In ME59N. Below error shows
Error Name                                                                                          Massage Class          Msg No.
PO header data still faulty                                                                            MEPO                         2
Internal number assignment not defined (please enter number)                 06                              243
I have done all the setting in Material Master & Vendor Master for Automatic PO Genration.
Aslo I maintain the source list & Info Record for two vendors.
I assign the source of supply in PR .
After this when I exicute in ME59N by entering Purchasing Group,Purchasing Org,Vendor,Plant
and selected the Per Requisition , per contract tab.
After this above two error is showing in SAP.
Kindly give us solution to resolve this.
Regards.
Abhijit
Subject changed to reflect the issue- by: Jürgen L

Hi
The error is probably caused because T161-NUMKI = <BLANK>. Please fill in the valid T161-NUMKI.
This needs to be done in customising
Transaction SPRO:
Material Management -> Purchasing -> Purchase Order -> Define Document types
Number range in the case of internal number assignment
Hope this information is of help.
Kind regards,
Lorraine

PO Error-Internal number assignment not defined

dear all gurus,
while i am creating the po and save it, the error occurs that Internal number assignment not defined (please enter number).
i hv already defined the no. range for the po.
now what should i do further in these matter.
rgds,
rajesh

Dear,
SPRO - Materials Management - Purchasing - Purchase Order - Define Document Types.
Select your document type and Assign your number of number range in number range intraval.
Regards,
Mahesh Wagh.

Maintenance Plan number range

What is meaning of MM NC NO OC while defining maintenance plan number range ? What is their significance ? I want to define number range of maintenace plan for Plant maintenance module, do I need to define MM NC NO OC also?
Regards,
VM

hi
it is the different maintenance plan category with different ,maintenance call object ,hence you can define each maintenance plan category with number range according to your requirement
regards
thyagarajan

Object with runtime number '0' not defined

Hello,
We have a problem in one step of the workflow we created for sales orders.
The following are the errors:
EXECUTE_METHOD_OBJECT_SYNC -> Object with runtime number '0' not defined
EXECUTE_METHOD_BOR -> Object with runtime number '0' not defined
EXECUTE_METHOD_BOR -> Object with runtime number '0' not defined
Object with runtime number '0' not defined
Message no. OL808
We have already seen all the binds and correct.
Thanks!
Ariel Prebianca

Associated message no with message 'Object with runtime number '0' not defined' is OL 808.
Check Note 1322173 - Wrong error msg raised in BP_JOB_READ of interrupt process. It may not directly solve the issue but it will help you show correct message.

Internal number assignment not defined (please enter number)

Hi gurus,
I am trying to recreate a PO with the BAPI BAPI_PO_CREATE but I always get the following error message 'Internal number assignment not defined (please enter number)'. Can anyone assist please
Regards,
Thandi

Hi,
Are you passing the purchase requisition number?
Possibly you cannot use that.
Check the same.
First try creating a PO via ME21N with the data you have.
Check if you face any problems and then try with the BAPI.
It will save a lot of time in investigating the errors.
Regards,
Ankur Parab

Number range not foung when doing profit center distribution

hi
iam getting error message profit center number range not found when doing distribution in profit centers. can any one help me with this.
thanks
monica

issue is solved
thanks

Periods not open and No ranges not defined

Hi
When trying to post documents in fb01 or f-43 i get a warning that the period is not open for the year 2008. Earlier I had defined the open and close posting periods for the 1 april 2007 to 31 march 2008.
Even after editing the year I get the errot that the number ranges are not defined for 2008.
How should I fix both these problems

hello,
Create the no ranges for the yerar 2008.
FBN1.
Regards
Ravi

Prob While Creating Customer Master - Error Msg "Number '0' Not defined"

Dear Experts,
I am Trying to create a customer with diff SP, SH, BP and PY. I was able to create Customer for BP and PY.
But now when I go and try to created a SH customer with xd01 for my Sales.Org (99SS-XS-X1),
In the Sales Area Data, Partner Function Tab, Partner function field the Number is 0 before the SH function field (instead of Internal / Blank) and at the bottom give the error Msg that "Number '0' is not define". I have Cross checked the my Number ranges(no-22 from 7000-7999), account groups(ZA22) and Partner function (SH), everything seems to Ok. But unable to find the solution. plz help me with this if you have ever come across such a prob.
I would like to mention that the previously had no issues in creating customers following same procedure. I guess some one must have changed some settings by accident.
This prob is only specific while creating only SP and SH Customers.
Many ThanX.

Thanks Amit for your valuable suggestion, But today I was able to solve the problem with help of my trainer, Someone has changed the default settings in partner determination, the solution is below which will help anyone who may come across a similar Problem.
Spro->IMG->Sales & Distribution->Basic Functions->Partner Determination->Setup Partner Determination->Setup Partner Determination for Customer Master->Partner Functions
Find the partner Function SP/SH/BP/PY there partner type should be KU. If anyone changes this settings Then the above problem arises.
Regards.

Maintenance plan number range PROBLEM

Hi ,
How to maintain number range for maintenance plans . Where can i maintain call objects . I had tryed to maintain number range for maintenance plan but when creteing maintenance plan i is showing no number range is found . What's the reason .......\
RB

Hi
- Go to IP20
- Press F6 (Manitain)
At the bottom you can see the Not assigned element.
Select the element - Press F2 (The color of the element turns blue
Select the group to which you want to assign the element
Press F5
The element is now assigned to the Group
Regards
Jignesh

Document number range not creating in Ecc 6.0

Hi
I have tried creating document number range in 6.0, but the change interval buttion is in display mode and not in the change mode, so not able to cretae number range. Any input.
Urgent please help.

Hi Sidhu,
It could be the limit of the authorization.
So try to check whether you have an authorizatin to change the interval or not.
Hope it helps.

Number range not reflected in production

Hello SAP greats
While I am posting excise duty in j1ij it is taking the number range for the year 2008 and not the new one i have maintained in j1i9(j_1irg23d), please note that only a single plant is taking this previous number range.
note: everything is working well in development and testing servers.
Edited by: prad_bh on Apr 6, 2009 2:14 PM

Hi,
First of all it should be J1IG and not J1IJ for the system to select the j_1irg23d object. Since you don't have any posting date selection screen system will consider the material document posting date and the material document posting date must be previous period. So the problem exist. Check for the material document posting date.
Regards
Srinivas.P

Maitenance Plan - Number range not defined

Similar Messages

Maybe you are looking for