Major Alarm: WAE clock needs to be synchronized with the primary CM to make time-sensitive features like statistics, status monitoring and event scheduling work correctly.
Hi all,
Although all the edges and CM have the same ntp configuration , I still have this major alarm on three Edge-WAAS even after synchronization .
Is it possible to learn more about this - what caused it, ect.
Any ideas on how to proceed? (software version 4.1.3.b)
Excuse my english , i'm not native speaker .
Alarm doesn't disappear even after 24 h from the synchronization .
These are the outputs of commands entered in the same time on the WAE and the CM :
Output on the WAE :
Edge-BrancheOffice#sh alarm
Critical Alarms:
None
Major Alarms:
Alarm ID Module/Submodule Instance
1 cms_clock_alarm cms
Minor Alarms:
None
Edge-BrancheOffice#sh clock
Local time: Fri Feb 1 10:42:07 GMT 2013
Edge-BrancheOffice#sh ntp stat
ntp enabled
ntp authentication disabled
server list:
Server Key
192.168.6.7 -
remote refid st t when poll reach delay offset jitter
==============================================================================
192.168.6.7 192.168.6.6 3 u 112 128 375 245.491 13739.6 5.756
Edge-BrancheOffice#
Output on the CM :
CM-manager#sh clock
Local time: Fri Feb 1 10:30:36 GMT 2013
CM-manager#sh ntp stat
ntp enabled
ntp authentication disabled
server list:
Server Key
192.168.6.7 -
remote refid st t when poll reach delay offset jitter
==============================================================================
192.168.6.7 192.168.6.6 3 u - 128 377 0.608 713549. 20.935
CM-manager#
Thank you .
Similar Messages
-
Slave instance can not synchronized with the master for a long time
Hi,
Slave instance can not synchronized with the master for a long time, and the gap of LSNs between slave and master are more and more larger. The transfer bytes per second between master and slave is 118MB/s , upper limit to the ethernet card. Why???
ENVIRONMENT:
1. A network program which we called mcdb is based on BDB 4.8.30. It is used to accept get/set requests and then query data from bdb or save data to bdb.
2. mcdb implements replication with bdb replication manager api. The default start replication policy is DB_REP_ELECTION, rep ack policy is DB_REPMGR_ACKS_ONE_PEER and rep priority is 100.
3. The bdb data files, bdb log files, region files and rep files are all in the same home directory.
4. There are two instances of the mcdb are separately on two standalone servers which has no other programs. These two instances are in one replication group which can elect a master automatically.
5. The master instance is online, which has lots of requests (get, set, delete).
ACTIONS:
1. Start two mcdb instances on two servers and the two instance make a replication group. Slave has already synchronized with the master.
2. Stop the slave for a long time (more than 20 hours).
3. Start the slave instance to synchronize data with master.
RESULT:
1. the gap of LSNs between slave and master are more and more larger.
2. db_stat of master and slave:
master db_stat:
467170 Number of PERM messages not acknowledged
9245 Number of messages queued due to network delay
172415 Number of messages discarded due to queue length
25880 Number of existing connections dropped
3407 Number of failed new connection attempts
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
DB_REPMGR site information:
10.67.15.146 (eid: 0, port: 30011)
Environment configured as a replication master
331726/3574994 Next LSN to be used
0/0 Not waiting for any missed log records
328872/466092 Maximum permanent LSN
0 Next page number expected
0 Not waiting for any missed pages
0 Number of duplicate master conditions originally detected at this site
2147M Current environment ID (2147483647)
100 Current environment priority
49 Current generation number
50 Election generation number for the current or next election
2323 Number of duplicate log records received
0 Number of log records currently queued
6768 Maximum number of log records ever queued at once
55284 Total number of log records queued
120M Number of log records received and appended to the log (120475988)
111 Number of log records missed and requested
2147M Current master ID (2147483647)
2 Number of times the master has changed
0 Number of messages received with a bad generation number
8505306 Number of messages received and processed
12 Number of messages ignored due to pending recovery
471869 Number of failed message sends
12M Number of messages sent (12959945)
0 Number of new site messages received
1 Number of environments believed to be in the replication group
990543 Transmission limited
0 Number of outdated conditions detected
0 Number of duplicate page records received
0 Number of page records received and added to databases
0 Number of page records missed and requested
Startup complete
6244678 Number of transactions applied
0 Number of startsync messages delayed
1 Number of elections held
1 Number of elections won
No election in progress
0.057097 Duration of last election (seconds)
8944103 Number of bulk buffer sends triggered by full buffer
0 Number of single records exceeding bulk buffer size
5273M Number of records added to a bulk buffer (5273592170)
10M Number of bulk buffers sent (10490865)
0 Number of re-request messages received
0 Number of request messages this client failed to process
0 Number of request messages received by this client
slave db_stat:
0 Number of PERM messages not acknowledged
0 Number of messages queued due to network delay
0 Number of messages discarded due to queue length
1454 Number of existing connections dropped
0 Number of failed new connection attempts
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
DB_REPMGR site information:
10.67.15.147 (eid: 0, port: 30011)
Environment configured as a replication client
329544/2916048 Next LSN expected
330433/2013808 LSN of first log record we have after missed log records
329543/5500501 Maximum permanent LSN
0 Next page number expected
0 Not waiting for any missed pages
0 Number of duplicate master conditions originally detected at this site
2147M Current environment ID (2147483647)
100 Current environment priority
49 Current generation number
50 Election generation number for the current or next election
5256M Number of duplicate log records received (5256599432)
3925284 Number of log records currently queued
3925285 Maximum number of log records ever queued at once
4880561 Total number of log records queued
3578038 Number of log records received and appended to the log
1912297 Number of log records missed and requested
0 Current master ID
1 Number of times the master has changed
0 Number of messages received with a bad generation number
12M Number of messages received and processed (12980442)
2 Number of messages ignored due to pending recovery
0 Number of failed message sends
1912307 Number of messages sent
0 Number of new site messages received
0 Number of environments believed to be in the replication group
0 Transmission limited
0 Number of outdated conditions detected
0 Number of duplicate page records received
0 Number of page records received and added to databases
0 Number of page records missed and requested
Startup incomplete
110568 Number of transactions applied
80 Number of startsync messages delayed
0 Number of elections held
0 Number of elections won
No election in progress
0 Number of bulk buffer sends triggered by full buffer
0 Number of single records exceeding bulk buffer size
0 Number of records added to a bulk buffer
0 Number of bulk buffers sent
0 Number of re-request messages received
0 Number of request messages this client failed to process
0 Number of request messages received by this client
Edited by: 899585 on 2013-1-4 下午10:54
Edited by: 899585 on 2013-1-4 下午10:55Hi,
Unfortunately, this issue is beyond the level of what is supported over the forum. Performance related issues are extremely complex and require an in-depth understanding of your environment and dedicated support. In a generic sense, you can look at this as a basic queueing problem. You have a server that went down and work is still coming in. When the server gets started it is possible that it may never catch up depending on new work coming in and the rate at processing the old work.
So what would you do in this case --- one thing would be to reduce the new work coming in. In HA terms this would be slowing the master down and you can increase DB_REP_ACK_TIMEOUT for this. Another thing you could do is add fresh servers to help reduce the workload. In HA terms, this would be the equivalent of restarting the client and give it a fresh look at everything. Another thing you could do is replan the system and load balance. In HA terms, it would mean something like take a hot backup of the master and reinit a client from scratch.
If you are interested in getting a dedicated support person working on this concern, please let me know and we can move forward down that path. Just respond to the thread with your email address and I will get in contact with you so we can pursue that approach.
thanks
mike -
I have changed my Apple ID name and I want to change it on iCloud, however I am not able to delete the previous account because I need to turn off the Find my iPhone - and for that I need to log in with the old name and that is not working. Help anyone?
Hey tulgan,
This link will provide information on what to do after you change your Apple ID:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Welcome to Apple Support Communities!
Take care,
Delgadoh -
Hi all,
at a customer’s site I’ve a problem with a fresh installation of Backup Exec 2014. Every backup (full or incremental) always reports the following
error: “An unexpected error occurred when cleaning up snapshot volumes. Confirm that all snapped volumes are correctly re-synchronized with the original volumes.”.
It’s not a Backup Exec problem itself, also backups using “Windows Server Backup” failing with the same error.
On this site I have three servers; the error is only generated for one of them. Here’s a short overview:
Server1: Windows Server 2012 R2, latest patchlevel, physical machine, Domain Controller and Fileserver. Backup Exec is installed on this machine,
backup is written directly to SAS tape loader. There error is generated on this server.
Server2: Windows Server 2008 R2, latest patchlevel, virtual machine, running on Citrix Xen Server 6.2. Used for remote desktop services, no errors
on this server.
Server3: Windows Server 2012 R2, latest patchlevel, virtual machine, database server with some SQL Instances, no errors on this server.
As I said, error is reported only on server1, no matter if it is a full or an incremental backup. During the backup I found the following errors
is the event log (translated from a german system):
Event ID: 12293
Volume Shadow Copy Service error: Error calling a routine on a Shadow Copy Provider. "{89300202-3cec-4981-9171-19f59559e0f2}" an error occured. Routinedetails Error calling Query(). [0x80042302] [hr = 0x80042302, unexpected component error of
the Volume Shadow Copy Service.
Process:
Volume Shadow Copy polling
Volume Shadow Copy delete
Context:
Executioncontext: Coordinator
Executionkontext: Coordinator
And
Event ID: 8193
Volume Shadow Copy Service error: Unexpected error calling Routine "IVssCoordinator::Query" hr = 0x8004230f, Unexpected error Volume Shadow Copy Service Provider
Process:
Volume Shadow Copy delete
Context:
Executioncontext: Coordinator
There are some articles about this error in the knowledge base or web which does not help or do not apply to my environment for example:
http://www.symantec.com/business/support/index?page=content&id=TECH38338&actp=search&viewlocale=en_US&searchid=1423724381707
What I already have tried:
Disabled Antivirus during the whole backup
Installed latest Service Pack for Backup Exec
Rebooted the server
vssadmin list writers do not show any errors
consult eventid.net for other possible solutions
no limits set for vaa
Anymore ideas from you guys?
Best regards,Hi Shaon,
vssadmin list providers gave the following output:
vssadmin list providers
vssadmin 1.1 - Verwaltungsbefehlszeilenprogramm des Volumeschattenkopie-Dienstes
(C) Copyright 2001-2013 Microsoft Corp.
Anbietername: "Microsoft File Share Shadow Copy provider"
Anbietertyp: Dateifreigabe
Anbieterkennung: {89300202-3cec-4981-9171-19f59559e0f2}
Version: 1.0.0.1
Anbietername: "Microsoft Software Shadow Copy provider 1.0"
Anbietertyp: System
Anbieterkennung: {b5946137-7b9f-4925-af80-51abd60b20d5}
Version: 1.0.0.7
Unfortunately theres not Symantec VSS Provider listed.
Best regards,
Christoph -
Since I installed my new d6300 netgear my downloads on Apple TV have taken a lot longer than previously using a billion router. Do I need to do something with the net gear set up?
Just connect the new iPod to your computer and setup the iPod via iTunes (instead of via wifi).
If you want to copy all the infor from an old iPod touch to the inew iPod see:
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device -
Turning off the iPad screen when synchronizing with the iTunes
Quick question: How do I turn off the iPad screen when synchronizing with the iTunes. Is this even possible? Are there settings I am overlooking? Or perhaps a third-party app which can make it happen?
I have a large library and often leave my iPad connected to iTunes for several hours at a stretch. The bright glowing screen can be a big distraction, and, more importantly I am very worried about pixel burn-in.
Cheers,The iPad LED Backlit IPS Screen is not phosphor-based, so there is no permanent phosphor burn-in problem. You might see some image persistence, but that is not permanent and can be corrected. See this support article about image persistence: http://support.apple.com/kb/HT2807
Since you have already converted your music to 128 kbps, you are unlikely to see any more 10+ hour syncs unless you have to do a restore. In that event, you could select the brightness control in settings to the lowest level.
FYI, there are some apps, such as Night stand HD that are designed to be used for long periods with unvarying displays and I have yet to see image persistence problems reported. However, since the iPad is still a new product, there may be some reports in the future. -
I'm in Brazil and need to talk via e-mail or chat, with the USA App Store. It happens that I made a purchase and did not get because I live in Brazil and mistakenly bought the site of the USA. How do I? Do you have any e-mail the department in charge?
I've tried, said they could not help and I should get in touch with the USA App Store. But the problem of getting in touch with the App Store USA is the only option I have on the phone, and my English is not very helpful. Therefore needed a complete address e-mail.
-
When synchronizing data using the BlackBerry Desktop Software the following error is displayed:
CRTranRec:: GetLinkedRecordId : Invalid linked record Id
what to do?
many thanks in advanceHi crugnola
Welcome to BlackBerry Support Forums
Please check your address book if you find any contact with blank images then add an image to those contacts ,it will fix this sync error , have a look :
KB31008 : Error "CRTranRec:: GetLinkedRecordId : Invalid linked record Id" is displayed when synchronizing with the BlackBerry Desktop Software.
Or head over to this thread Cleanly "Starting Over" with the Desktop Software (non-BES) and start all over again or within that thread on post #15 there is a link to older version of BlackBerry Desktop Software , download version 6.1 it has help many user that I know from this error.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it. -
I need to remove myself as the primary administrator for a CC acount and assign to another administrator. How should I proceed?
adobe forums, only to discover Adobe doesn't allow a primary admin to ever leave. This is rather silly as people leave workplaces, they don't stay for life. An answer in a different forum on this site said one must cancel their adobe account, then start a new one. Though... Adobe doesn't allow a person to cancel their adobe account. It all must be done via Adobe customer service, which has proved non existent. There is no email address to email a request, there is a chat option which claims 24/7 chat however this functionality doesn't seem to work on my new Lenovo computer, current IE explorer running Windows 8.
Adobe - you really need to sort this out. I have left the work place where I was the Team Administrator some months ago now and now I need to be removed from that workplace account completely. Currently, I still have full access to it, which is not good from a security point of view because if I were a disgruntled ex-employee I could play havoc with my workplaces subscription and access their confidential files stored in the cloud.
Looking through the Forum, there is a great deal of conversation on this exact point. I'd suggest you answer this one, then create a sticky so people don't keep creating new threads and then see about resolving the issue so that Primary Admins can change in future, and be removed when they leave the workplace.
Thanks
Geoff -
I need to work with the RAW files on a SONY RX100III camera. I use Photoshop CS5 and a Mac operating system OSX 10.6. Is there an Camera RAW upgrade or an alternative program that works here?
You don't. Since you have an Intel Mac, buy a Mac OS X 10.6 DVD from the online Apple Store.
(71894) -
Help needed to sync cache with the database using CacheStore
Hi,
I need to have my cache in sync with the database. I followed the tutorial to create a DBCacheStore class which will act as a CacheStore between Cache and my Oracle database. My Cache-Config file contains
<backing-map-scheme>
<read-write-backing-map-scheme>
<internal-cache-scheme>
<local-scheme></local-scheme>
</internal-cache-scheme>
<cachestore-scheme>
<class-scheme>
<class-name>com.coherence.cacheUtil.DBCacheStore</class-name>
<init-params>
<init-param>
<param-type>java.lang.String</param-type>
<param-value>{cache-name}</param-value>
</init-param>
</init-params>
</class-scheme>
</cachestore-scheme>
</read-write-backing-map-scheme>
</backing-map-scheme>
Now, what I am trying to achieve is,
1. Load the cache with values when the cache server is up, without any need to run separate program
2. Integrate all read/write cache operations with the database
I am aware that CacheStore class implements store, storeAll, erase, eraseAll, load, loadAll methods from undelying interface and I need to write corresponding code to add/remove/update records in the database.
But, I am really not sure how and when to include the logic to load the cache with the data from the database when the server is up.
Thank for the help. Much appreciated!Could you try something like this to load the cache?
HashSet buffer=new HashSet();
s = conn.createStatement();
rs = s.executeQuery("select key from table");
while (rs.next())
String key = rs.getString(1);
buffer.add(key);
// this loads 1000 items at a time into the cache
if ((count++ % 1000) == 0)
cache.getAll(buffer);
buffer.clear();
if (!buffer.isEmpty())
cache.getAll(buffer);
This web page also gives a good example:
http://www.oracle.com/technology/pub/articles/vohra-coherence.html
-Luk -
Hey! I bought Lightroom 5 but then realized I need another version to actually use it. So I want to return it and then just get a monthly Lightroom membership.
By “monthly membership” do you mean access to these forums, or paying $10/month for access to PS+LR, the Photography Plan?
If the latter, realize that you cannot get an earlier version of LR than 5 with the monthly plan, because LR4 had no ability to check to see if it is licensed via a subscription. This capability started with LR 5.
If you mean you need to buy LR4 or upgrade your computer to OS X 10.7+ or Windows7+, then your only option with your current computer is to buy the obsolete LR4 on somewhere like Amazon, and make sure it is the full version not the upgrade version. -
Need help from somebody with the "MSI KT6 Delta-FIS2R" motherboard
Hi everybody!
I really need some help from somebody with the MSI KT6 Delta-FIS2R motherboard (the one with onboard LAN, Audio, RAID, S-ATA and IEEE1394 firewire). You see. I've got this board myself but it's been destroyd. Some values for the onboard devices in my board has been overwritten so that windows no longer recognizes the onboard LAN and Audio controller anymore. I really need some help from somebody with this board.
I need to see what the values for the onboard devices should be. I hope someone can help me by sending me a repport from the Everest home edition: http://www.lavalys.com/products/overview.php?pid=1&lang=en
If anyone could do me this favour, I would be VERRY thankfullQuote from: HYSTERIAH on 12-November-05, 06:24:20
I really need some help from somebody with the MSI KT6 Delta-FIS2R motherboard
HYSTERIAH,
With 76 Replies and 277 Views on your original thread, it looks to me like people have been trying to help you.
So there is no confusion, I am locking this thread so all your help and advice you receive will be in the same place, so people do not need to jump between threads to keep track of what has already been suggested for this mobo of yours.
Richard -
I have to run Windows for work, yuk! Which is best Parallels, Fusion, or Boot Camp? I will not need to share anything with my Mac side as I will just be running one program to chat on the web and send Emails.
Parallels, Fusion and VirtualBox are all virtualization applications, they 'virtualize' (create) a Windows environment on your Macs OSX operating system.
Boot Camp makes a compatible partition on your hard drive so you may install windows on it directly. -
Treo 700P with contacts - need advice on synchronizing with new outlook user profile
Hello Treo Experts.
I have a Treo 700P.
It is full of contacts.
I have a new Outlook user profile and am unable to synchronize between the Treo and Outlook.
I deinstalled Palm SW and reinstalled it
I am about to 'syhncronize the Treo with my computer
my question is: Is this safe to do? I don't want to lose all my contacts on my Treo.
Any suggestions - greatly appreciated!
Post relates to: Treo 700p (Verizon)
Post relates to: Treo 700p (Verizon)Hi.. Welcome to the Palm forums. You should be fine, the contacts on the device should write to outlook and combine with what ever is in outlook.
Post relates to: Centro (Sprint)
Maybe you are looking for
-
assume variable a is 4.647 and i want to convert this to 4.5 . how can i round numbers like this. Is there is a predefined method in java to achive this.
-
I forgot my security question and my rescue email are the same as Apple ID so cannot reset my security question. Any advice on how to reset m security or add a rescue email ? Thanks
-
Portal Runtime Error in Dynamic Navigation Area
Hello gurus, In our production portal all of sudden we are getting a portal runtime error in Dynamic Navigation Area. Earlier there was a problem with one of the clustered nodes and it was resolved. I was wondering if this error is in connection wi
-
Debugger unable to connect to remote process
Hi There, I am running Jdev on pc and OAS 10g on an unix environment. I followed the step in the doc to set up the remote debugging. However, when I start the remote debugger from jdev, i got the following error message. Debugger attempting to connec
-
i try to down low snow leopaard what shoul i do . im gettin a kernel message ?