Major and minor Functional difference between 4.6c and ecc 6 in SD module

Hi Gurus,
Will anyone will mail me doc or url that shows the Major and minor Functional difference between 4.6c and ecc 6 in SD module. Mail me at [email protected]
full points for helpful answer
Regards,
PV

Hi,
This website is very helpfull for version comparision, have a look at it.
<a href="http://solutionbrowser.erp.sap.fmpmedia.com/">Compare_Versions</a>
Cheers...
Santosh

Similar Messages

What are the functional differences between the iPhone and the iPod Touch, barring of course the differences in service requirements.

What are the functional differences between the iPhone and the iPod Touch, barring of course the differences in service requirements.

For one, their form factors are slightly different as the iPhone has a bit more squarish body whereas the iPod Touch has a tapered back to it.
The iPhone also has much better front and rear cameras. Exact details as to the difference in megapixels depends on whether or not you talking about the iPhone 4 or 4S. If you would like to get more details, you can always view
each models specs on Apple's online store.
See here for a better explanation.
http://en.wikipedia.org/wiki/IPod_Touch#Comparison_to_the_iPhone
I'm sure others will chime in with other things as well.
B-rock

Key functional differences between SRM 7 and SRM 5

Dear All,
I urgently need to put togther a comparison document thst list key functional differences between SRM 7 and SRM 5.
NB. i donot have access to service marketplace.
sheena.roberts(AT)yahoo
Thanks
Edited by: Sheena Roberts on Jan 18, 2011 11:21 AM

Hi Sheena,
Go to difference between srm 5.0 and 7.0
Regards
Vishal Pd

What is the conceptual and functional difference between peripheral target and Enterprise peripheral target?

Dear All,
what is the conceptual and functional difference between peripheral target and Enterprise peripheral target?

Does anyone get a chance to see this ?

LE/WM functionality difference between 4.6c and ECC 6.0

Hi,
     I am looking for functionality differences between 4.6c and ECC 6.0 for LE and WM in particular. I have already checked the sites related to overall differences. I am particularly looking for differences between 4.6c and ECC 6.0 in Warehouse Management and Logistics Execution. Helpful answers will be rewarded.
cheers,
Sarvesh

This is what I have gathered from this thread.
R 4.7 New Functionality in WM:
     Cross Docking
     Value Added Services
     Task and Resource Management
     Dynamic Cycle Counting
     Yard Management
Effect of ECC 5.0 on WM:
Archiving Data has been improved
ECC 6.0 Version comparison link
http://solutionbrowser.erp.sap.fmpmedia.com/
     Picking Consolidation for many deliveries
     RFID integration
     Enhanced Cross Docking
     Enhanced Task and Resource Management

Are there any functional differences between the trial and the paid version?

Are there any functional differences between the trial and the paid version for Labview 2009? Thank you.
Solved!
Go to Solution.

This outlines the limitations of the eval version of Labview: Limitations of the LabVIEW Evaluation Version
Cheers,
Misha

What's the functional difference between placeholder text and regular text?

When inserting text into a project template that I'm creating, what's the difference between inserting regular text (using the Caption tool) and inserting placeholder text?
There's an obvious difference between inserting an image and an image placeholder, but when I use a project template that I've created, placeholder text and caption text behave the same way: I see the text on the stage, and double-click it to edit. So why go through the extra step of inserting placeholder text?

Textbooks are educational books for use in schools and universities and the like. They are currently avaiable for purchase only in the USA. Textbooks have different contract clauses applied to them. Among them is an obligation on the publisher to offer textbooks that are sold in electronic form via other distributors in the iBookstore as well. Textbooks also have different (much lower) pricing tiers, and they must be made available via the bulk purchasing program. Textbooks must be authored with IBA (they cannot be ePub). I believe that textbooks also undergo a more stringent review process.
Normal eBooks (not in the textbook category) can currently be sold in 32 territories (US, Canada, Australia, and most of Europe), and their pricing tiers provide for much higher prices.
There is no difference in the widgets you can use in normal books and textbooks. The same widget set that is provided by IBA applies to both. In addition, a normal eBook can be published in ePub format and, therefore, authored with software other than IBA.
Books can contain audio and video and, yes, iBooks Author allows you to create such books.
Michi.

CIN Functionality difference between 4.6C to ECC 6.0

Dear Friends,
I need to analyze the difference of main functionality difference with regards to CIN topics from 4.6C and ECC 6.0.
Currently my company is using CIN 40A
Please help me with your input on this topic.
If possible send me any kind of documents.
Your help will be much appreciable.
Regards
Plats

Hi
Please check this for differences.
http://solutionbrowser.erp.sap.fmpmedia.com
regards
Srinivas

Differences between 4.6c and ecc 6 in LE module

Hi Gurus,
Will anyone will mail me doc or url that shows the Major and minor Functional difference between 4.6c and ecc 6 in LE module. Mail me at [email protected]
full points for helpful answer
Regards,
PV

Hello Venkatesh,
Here is the version comparision for SAP.
http://solutionbrowser.erp.sap.fmpmedia.com/
Hope this helps.
Regards
Arif Mansuri

Functionality Differences between versions 4.7 and ECC 6.0?

Hi All,
Can anyone tell me what are the main functional differences between 4.7 and ECC 6.0? What is the release date/year for ECC 6.0.
Regards,
MD.

Hi.
1) ECC is more towards OOPS concepts.
2) It has new debugger,
3) New Enhancement Framework is introduced in ECC.
4) ECC contains many more badis.. in some functional areas such as HR.
5) Its more efficient to use Adobe forms in ECC.
6) Some of the fields and tables have changed in ECC.
http://solutionbrowser.erp.sap.fmpmedia.com/
http://www.sap.com/services/servuptech/bestpractices/index.epx
Solution Browser would give the differences (Features):
http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
Release Info:
ECC 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
ECC 5.0:
http://help.sap.com/saphelp_erp2004/helpdata/en/c6/feda40ebccb533e10000000a155106/frameset.htm
You can find the difference in release notes of each SAP version.
Here are the links.
http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Regards,
Srini Nookala

Differences between B2B IPCUI and CU50 IPCUI?

Dear all.
We have SAP ERP 6.0 installed with integrated IPC in VMC running. On another box we have NW 7 with E-Commerce 5.0 and TREX 7.0 and MS ISS 7.5 running.
We have two scenarios:
Scenario 1: http://host:port/b2b/b2b/init.do
After a logon a shop list appears. After going into a shop, navigating through the catalog and choosing a configurable product, the IPC UI gets displayed.
Scenario 2: SAP Gui transaction CU50
After choosing the same configurable material as in scenario 1 and running it through the IPC, the IPC UI gets displayed.
The IPC UI via CU50 shows correctly status ligths as configured through XCM parameter appearance.showstatuslights=T.
But the IPC UI in the B2B does not show the status lights, but the texts.
My assumption is that both scenarios are using the same IPC UI.
Or is there maybe a difference?
What I also do not understand is:
Why do I have XCM configuration for IPC two times?
One "Internet pricing and configurator" in ../ipc/admin/xcm and another "IPC" in ../b2b/admin/xcm
Maybe this is a silly question, but I haven´t found any solution nor answers to these issues and questions after long investigations.
Thanks and regards
Stefan

Your Scenario 1: uses IPC-SCE (Configuration Engine) for runtime configuration of a configurable product. This uses the IPC as the runtime engine for configuring the product. The IPC UI (along with appropriate Java application) helps you render the design and get your input.
Your Scenario 2: SAP Gui transaction CU50 uses the classical Variant Configuration LO-VC module of the SAP R/3 (ECC 6.0) system. The SAPGUI Variant configuration screens don't use IPC at any instance.
The IPC UI via CU50 shows correctly status ligths as configured through XCM parameter appearance.showstatuslights=T. But the IPC UI in the B2B does not show the status lights, but the texts.
It is very likely that you are seeing the default behavior of CU50 set elsewhere. Try changing the XCM setting and see if CU50 display property changes.
My assumption is that both scenarios are using the same IPC UI.
Not correct.
See more detailed functional differences between IPC-SCE and LO-VC at this link Comparison of SCE and R/3 Variant Configuration.
Why do I have XCM configuration for IPC two times?
One "Internet pricing and configurator" in ../ipc/admin/xcm and another "IPC" in ../b2b/admin/xcm
Technically they are two different applications for use in different contexts. ../ipc/ for both design time and runtime of product configuration. This is what actually controls the IPC UI appearance in the web. The ipc component in the ../b2b/ application is for picking up the right configuration type that is defined in XCM of the _ipc application _.
Maybe this is a silly question, but I haven´t found any solution nor answers to these issues and questions after long investigations.
Probably, this was "intuitive" by SAP standards, so they don't have any documentation for developers who don't work in SAP.....
(1) Define a custom configurations for application configuration isab2b and isacatalog in ipc/XCM.
(2) After making changes to ipc application (XCM) for UI settings, you have to restart the ipc application.
(3) Define custom component for application component ipcdefaul in b2b/XCM
(4) In the place of isab2b and isacatalog, input the names of the custom configurations you defined in ipc/XCM
(5) Restart the b2b application.
Hope this helps...
Easwar Ram
http://www.parxlns.com

Difference between Report painter and abap query .

can anyone please tell me the difference between the report painter and the ordinary alv,clasical reporting and also the difference between Report painter and abap query. How the output format will be in Report painter. If anyone has any documents please send it to
[email protected]
Thanks,
Joseph.

hi,
ABAP Query is an ABAP Workbench tool that enables users without knowledge of the ABAP programming language to define and execute their own reports.
In ABAP Query, you enter texts and select fields and options to determine the structure of the reports. Fields are selected from functional areas and can be assigned a sequence by numbering.
link for abap query --
https://forums.sdn.sap.com/click.jspa?searchID=221911&messageID=2790992
whereas the Report Painter enables you to report on data from various applications. It uses a graphical report structure that forms the basis for the report definition. When defining the report, you work with a structure that corresponds to the final structure of the report when the report data is output.
link for report painter --
https://forums.sdn.sap.com/click.jspa?searchID=221874&messageID=1818114
Regards,
pankaj singh
Message was edited by:
Pankaj Singh
Message was edited by:
Pankaj Singh

Difference between Heuristic SAP_SNP_SNGL and SAP_SNP_MULT

Hi,
Please explain me the functional difference between heuristic SAP_SNP_SNGL and SAP_SNP_MULT.
Regards
Syed

Dear Syed,
To convert Supply Network Planning (SNP) orders or Capable-to-Match(CTM) orders into Production Planning and Detailed Scheduling (PP/DS) orders, you use a heuristic based on the algorithm /SAPAPO/HEU_SNP_CONVERT, such as the standard heuristic SAP_SNP_SNGL.
You can implement the heuristic in the production planning run or in interactive planning. If you want to use the functions of the MRP heuristic in the production planning run for a high-performing mass conversion (bundling, parallel processing, and extended log), you call up the conversion heuristic using the MRP heuristic. The heuristic SAP_SNP_MULT is available as a combined standard heuristic.It is an MRP heuristic that calls up the SAP_SNP_SNGL heuristic.
SAP_SNP_MULT is a SNP-PP/DS conversion for many products:
You use this heuristic to perform a mass conversion of Supply Network Planning (SNP) orders into Production Planning and Detailed Scheduling (PP/DS) orders in the production planning run. This heuristic is an MRP heuristic that calls the heuristic SAP_PP_SNGL for the actual conversion.
SAP_SNP_SNGL is used in production planning run for conversoin.However, the conversion takes place with heuristic SAP_SNP_SNGL which is entered in the heuristic SAP_SNP_SNGL customizing.
Please also refer to online for more details on this...
http://help.sap.com/saphelp_scm2007/helpdata/en/c1/147a375f0dbc7fe10000009b38f8cf/frameset.htm
I hope this helps.
Regards,
Tibor

Difference between Learning Solution and Training in ESS

Hi,
I would like to know the functionality difference between Learning Solution and Training when will be using through ESS.
I have found that Training is part of SAP's old version and java based application not available on ESS for Training. In Learning solution, we are getting java based application for all the activity. Functions like, Training Activities, Qualification Profile, Profile Match-up, Settings are available on Learning Solution but the same are not available on Training. Even Pre-booking is not available on ESS through Training.
I would like get feedback from forum. Please who have experience on the same, do guide me. I would like to suggest the client for the same.
Prompt response will be highly appreciated.
Regards,
Aashish

Got Solution. Thanks

Difference between workbench request and customizing request in transport

Hi Experts,
I am new to SAP BI7 work. i am having basic doubt in Transort request creations
ususally we create the requests to transport the objects from Development system to further systems.
can anyone please clarify me, what is the main defference between the Workbench request and Customizing request.
Thanks and Regards
Mrudula

Hi ,
The Transport Organiser maintains Change Requests.These requests record the changes made to the repository and customizing objects.Based on that objects changed they are
1)WorkBench Request & 2) Customizing Request.
Workbench Requests are those that involve changes to cross-client Customising and Repository Objects. The objects are independent of the client.Hence the requests are used for transferring and transporting changed Repository objects and changed system settings from cross-client tables.
Customizing Requests involve changes recorded to client-specific Customizing objects .These client specific requests are used for copying and transporting changed system settings from client-specific tables.
Refer this links http://www.allinterview.com/showanswers/57910.html
customising and workbench request
Difference between Customizing request and Workbench request
and many more threads available on this.
Regards,
Rahul.

Major and minor Functional difference between 4.6c and ecc 6 in SD module

Similar Messages

Maybe you are looking for