Major delay when switching between folders in Mail

More often than not when I switch between folders (inbox-to-trash or junk-to-inbox, etc) none of the messages in that folder show up and it says on top "0 messages".
Sometimes they come back after 5 or 6 seconds. Other times it takes over a minute. There usually aren't that many messages in either the folder I'm coming from or going to.
Any thoughts?

Based on the tons of new messages showed up in the Trash, I suggest the following.
Quit Mail first and using the Finder go to Home > Library > Mail.
Copy the Mail folder and place the copy on the Desktop for backup purposes.
Using the Finder, go to Home > Library > Mail > Envelope Index.
Delete the Envelope Index file and empty the Trash.
The Envelope Index file stores an index of all mailboxes and messages.
Launch Mail and you will be prompted to import mailboxes. Select OK and allow the process to complete. This isn't really importing anything but creating a new Envelope Index file within the Mail folder and re-indexing all mailboxes and messages within.
This may cause more previously deleted messages to re-appear but this should resolve the delay problem.
After confirming all mailboxes are available and there is nothing unusual, you can delete the copy of the Mail folder placed on the Desktop.

Similar Messages

Delaying when switching between apple mail and safari

just on mavericks.
it more or less looks and feel ok but...
when I switch between apple mail and safari, everything "freezes" for some seconds (up to 30).
anyone similar experiences?
what could be the cause of that?
its really disturbing.

I am a little puzzled by the libraries and switching between the libraries. My personal computer has the majority of the movies and content that would be transfered to the appletv. I chose to only select a minimal amount of content (of movies and tv shows, music via playlists) so there would be space left that would hold photos. Also, i just want to send over only what I want to view (manual synch) If I switch to my Kids library, it streams all the content well (movies & tv shows)(which is fine and streams well) If I switch back to my library, it shows every movie, every tv show, hundreds of music playlist that I did not choose to see. (stream mode) The only fix is to reboot the computer, and all is well. anyone experience this issue?

[SOLVED] Delay when switching between ttys

When I switch between tt2 - tt6 right after boot, I experience a delay of about 7 seconds
before I am presented with the respective login prompt.
During that time, I only get a blinking cursor in the upper left corner.
Note that I experience the delay for each tty, but only for the first time that I switch.
After that, switching is instantaneous.
It doesn't matter whether I am logged in on tty1 or not.
This problems seems to be relatively new.
Kernel mode setting is enabled.
Last edited by Aton (2013-04-12 12:14:19)

Okay, I have found the problem.
Seems that I hadn't correctly enabled [email protected].
Journalctl:
systemd[1]: Job sys-subsystem-net-devices-multi-user.device/start timed out.
systemd[1]: Timed out waiting for device sys-subsystem-net-devices-multi-user.device.
systemd[1]: Dependency failed for Automatic wireless network connection using netctl profiles.
This somehow caused the problem.
Whenever I switched ttys before those events, I would get the 7 second delay.
After that, everything was normal.
After correctly configuring netctl, the problem is gone.

Lag/delay when switching between windows/applications in Yosemite

I have installed Yosemite onto a 27" iMac mid 2011 with 16Gb RAM. Since the installation anytime I switch between windows in an application or between applications I get a delay or lag of between 5-10 sec before I can then utilise then next window. I have 3 other iMacs of various ages that I have also installed Yosemite on and there has been no lag/delay issues. One of the other iMacs is exactly the same specification as the one that is displaying the lag/delay. It did not exist in 10.9.5.
Has anyone else encountered this issue?

Run some of the maintenance utilities such as Onyx, Cocktail or Main Menu.
Create a new user account and see if it is also happening there.

OWA - save menu disappears when switching between calendar and mail

Hi everybody! We recently migrated to from Exch 07 to 13, and there seems to be a small problem in OWA.
In OWA 2013, when users creates an invite in Calendar, and switch back to Mail, a menu appears (see below) and then disappears immediately. Instead of allowing users to choose whether to save or discard changes to their invites, it automatically discards,
and goes to Mail. It happens in both IE and Chrome, and for all users. Any ideas what's
going on? Tried all the usual - clearing cache, etc. It doesn't appear to be a problem with the client. Thanks!

Hi,
From your description, I recommend you create a new mailbox in your Exchange server 2013 and verify if this new user has the same issue. What's more, this issue doesn't appear on Outlook, you can try to recreate OWA virtual directory to check the result.
Here is an article for your reference.
Reset Client Access Virtual Directories(Note: Though it is Exchange 2010, it also applies to Exchange 2013 about this issue.)
https://technet.microsoft.com/en-us/library/ff629372(v=exchg.141).aspx
Best regards,
Amy Wang
TechNet Community Support

Massive delay when switching back to table

Hello,
I have a couple of tabs on my shell, the first and main one containing 2 tables, and the tabs have various elements etc on them. In the last 2 weeks when I switch back to my main tab that has the 2 tables on it there is a massive delay around 8 seconds!
This was never there before, if I have my model empty then the delay is only 1 second, but there is no delay when switching between the other tabs, only when switching back to the one with the tables.
I recreated a static table that was similar, with hardcoded data, even with the 2 tables on that example there was an 800ms, which was noticeable and again no delay on the other tabs when switching.
Anyone have any ideas?
Thanks,
Donnchadh.

Hi,
So I have traced it down to my dropdown box, when my dropdown box list is bound to a node in my model with 650 items it takes about 6.5 seconds, but if it is bound to a node with only 15-20 items then switching back to the table only takes around 1 second.
What is going on here? Is it re-rendering the page?
*update
So added this piece of code to the table
oTable.addDelegate({ onAfterRendering : $.proxy(function(){
console.log('table rendered');
}, oTable)});
It is infact rendering the page twice when switching back to the tab, this happens with the shell and I also tested it with only using a tabstrip and same amount of delay.
Why is this happening? Anyone had a similar issue?
Message was edited by: Stam anatic

Dreamweaver 6.1 - JavaScript error when switching between open tabs

When switching between open tabs a sequence of javascript
errors occurs. I had not used Dreamweaver for about 2 weeks, and
last time I used it with no problems.
I have tried uninstalling it, OKing removal of all files when
asked, re-installing it and updating with dwmx61_updater.exe, but I
still get the same errors.
This has rendered the software virtually unuseable, so any
help would be greatly appreciated, as I'm working to a
rapidly-approaching deadline.
"While executing Browse_Back enabled in toolbars.xml, a
JavaScript error occurred"
followed by
"While executing Browse_Forward enabled in toolbars.xml, a
JavaScript error occurred"
followed by
"While executing Browse_Stop enabled in toolbars.xml, a
JavaScript error occurred"
The relevant code seems to be :

<toolbar id="Browser_Toolbar" platform="win"
label="Browser Navigation" container="document"
initiallyVisible="false">
<button id="Browse_Back"
image="Toolbars/images/MM/back.gif"
disabledImage="Toolbars/images/MM/back_dis.gif"
tooltip="Back"
label="Back"
enabled="dw.getDocumentDOM().browser.isCmdEnabled('back')"
command="dw.getDocumentDOM().browser.backPage()"
update="onEveryIdle"/>
<button id="Browse_Forward"
image="Toolbars/images/MM/forward.gif"
disabledImage="Toolbars/images/MM/forward_dis.gif"
tooltip="Forward"
label="Forward"
enabled="dw.getDocumentDOM().browser.isCmdEnabled('forward')"
command="dw.getDocumentDOM().browser.forwardPage()"
update="onEveryIdle"/>
<button id="Browse_Stop"
image="Toolbars/images/MM/stop.gif"
disabledImage="Toolbars/images/MM/stop_dis.gif"
tooltip="Stop"
label="Stop"
enabled="dw.getDocumentDOM().browser.getPageBusy()"
command="dw.getDocumentDOM().browser.stopPage()"
update="onBrowserPageBusyChange"/>
<button id="Browse_Refresh"
image="Toolbars/images/MM/browserRefresh.gif"
tooltip="Refresh"
label="Refresh"
enabled="true"
command="dw.getDocumentDOM().browser.refreshPage()"/>
presumably the next error is caused by the previous ones
failing :
"While executing getCurrentValue in AddressURL.htm, a
JavaScript error occurred"
the relevan tcode :
function getCurrentValue()
var dom = dw.getDocumentDOM();
var value = dom.browser.getURL();
if (value && value.length)
//check if is it not a temp file
//extract the tail of the url
var filename = value;
var slashIndex = filename.lastIndexOf("/");
filename = filename.substring(slashIndex+1);
var tempIndex = filename.indexOf("TMP");
if (tempIndex != 0)
addRecentAddress(value);
return value;

You can try this simple fix -
Quit DW.
Find this folder -
C:\Documents and Settings\<username>\Application
Data\Macromedia\Dreamweaver
8\Configuration\WinFileCache-*.dat
(these folders are normally hidden - you may have to use
Explorer > Tools >
Folder Options to unhide them)
and delete it.
Restart DW. Works better?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"earthdoctor" <[email protected]> wrote in
message
news:[email protected]...
> When switching between open tabs a sequence of
javascript errors occurs. I
> had
> not used Dreamweaver for about 2 weeks, and last time I
used it with no
> problems.
>
> I have tried uninstalling it, OKing removal of all files
when asked,
> re-installing it and updating with dwmx61_updater.exe,
but I still get the
> same
> errors.
>
> This has rendered the software virtually unuseable, so
any help would be
> greatly appreciated, as I'm working to a
rapidly-approaching deadline.
>
>
> "While executing Browse_Back enabled in toolbars.xml, a
JavaScript error
> occurred"
> followed by
> "While executing Browse_Forward enabled in toolbars.xml,
a JavaScript
> error
> occurred"
> followed by
> "While executing Browse_Stop enabled in toolbars.xml, a
JavaScript error
> occurred"
>
> The relevant code seems to be :
>
> 
>
> <toolbar id="Browser_Toolbar" platform="win"
label="Browser
> Navigation"
> container="document" initiallyVisible="false">
>
> <button id="Browse_Back"
> image="Toolbars/images/MM/back.gif"
> disabledImage="Toolbars/images/MM/back_dis.gif"
> tooltip="Back"
> label="Back"
>
enabled="dw.getDocumentDOM().browser.isCmdEnabled('back')"
> command="dw.getDocumentDOM().browser.backPage()"
> update="onEveryIdle"/>
>
> <button id="Browse_Forward"
> image="Toolbars/images/MM/forward.gif"
> disabledImage="Toolbars/images/MM/forward_dis.gif"
> tooltip="Forward"
> label="Forward"
>
enabled="dw.getDocumentDOM().browser.isCmdEnabled('forward')"
> command="dw.getDocumentDOM().browser.forwardPage()"
> update="onEveryIdle"/>
>
> <button id="Browse_Stop"
> image="Toolbars/images/MM/stop.gif"
> disabledImage="Toolbars/images/MM/stop_dis.gif"
> tooltip="Stop"
> label="Stop"
> enabled="dw.getDocumentDOM().browser.getPageBusy()"
> command="dw.getDocumentDOM().browser.stopPage()"
> update="onBrowserPageBusyChange"/>
>
> <button id="Browse_Refresh"
> image="Toolbars/images/MM/browserRefresh.gif"
> tooltip="Refresh"
> label="Refresh"
> enabled="true"
> command="dw.getDocumentDOM().browser.refreshPage()"/>
>
>
>
> presumably the next error is caused by the previous ones
failing :
>
> "While executing getCurrentValue in AddressURL.htm, a
JavaScript error
> occurred"
> the relevan tcode :
>
>
> function getCurrentValue()
> {
> var dom = dw.getDocumentDOM();
> var value = dom.browser.getURL();
> if (value && value.length)
> {
> //check if is it not a temp file
> //extract the tail of the url
> var filename = value;
> var slashIndex = filename.lastIndexOf("/");
> filename = filename.substring(slashIndex+1);
> var tempIndex = filename.indexOf("TMP");
> if (tempIndex != 0)
> {
> addRecentAddress(value);
> }
> }
> return value;
> }
>
>

Yosemite 10.10.1 - DNS cache does not clear when switching between WiFi networks

Before updating to Yosemite, DNS caches would clear when switching between WiFi networks, as they should.
For Example, when using an Exchange server, your server name might be something like mail.company.com. Outside of the corporate LAN the IP would resolve to the outside (WAN) address. When you move the laptop inside the corporate LAN, it should clear the cache so mail.company.com resolves to the internal (LAN) address. This is just one example of a dumb DNS transition not taking place switching from outside to inside (and vice versa).
Instead, OS X is holding onto the outside DNS record even when moving to the Corporate LAN. The only way to fix is to run the DNS cache command (which is MUCH more convoluted in Yosemite now), or more easily, to quickly turn off then turn on WiFi.
This is an irritation as I have to perform this action every morning, and every time I come back to my desk from offsite.

Well, clearing the caches is as simple as this, no?
Clear MDNS Cache
sudo discoveryutil mdnsflushcache
Clear UDNS Cache
sudo discoveryutil udnsflushcaches
One other thing: Have you tried 10.10.2? There are many many fixes in 10.10.2 over 10.10.1.

FaceTime camera turns off when switching between spaces

I will have the Facetime app on, have a conversation with a person. I have Mail opened up full screen in another "space." When I switch to that space, the camera turns off. I have to go back to the "space" that FaceTime is in in order to turn the camera back on. Is there a way to keep the camera on all the time when switching between different spaces and the Dashboard?

Having the same problem - In Snow Leopard, when I was on a FaceTime chat with a friend, I was able to navigate away from the FaceTime and surf, check the calendar and other stuff without pausing my video feed. In LION, for whatever reason, FaceTime pauses itself whenever I navigate away from the app. It's as if the application is FORCING me to stay in the conversation when, sometimes, I use FaceTime for TALKING, not VIDEO CONFERENCING.

Graphic distortion when switching between external and built-in display (rMBP)

Recently (within the past two weeks or so) I've noticed a strange issue when switching between my external display (Thunderbolt) and my built-in display on my 15" rMBP. The following issue seems to be specific to Photoshop CS6.
Typically, I'll have a PS document open on my external display and I'll wind up taking my to another location. If I close the PS document while on my built-in and then re-open it, I get all kinds of distortion and pixellation. Closing out PS and reopining, restarting, logging on/off; none of it seems to work. It seems like the issue is with the PSD itself, but it doesn't make any sense to me. Any ideas? Screenshot: http://i.imgur.com/iCipSc7.jpg

Do you have intel gpy as well as other graphic card? You may be viewing document on different gpu's. PS does not like multiple gpu's.

How to keep location in a table persistent when switching between pages

Hi -
How would I keep my last location persistent in a table when switching between pages? If I am on cell X and switch to another page, when returning to the previous page, I return to the top of the table. This can be very annoying when trying to find the same location in a large table (or even in a small one).
Thanks.

If by "page" you mean "sheet", you can do it. To get back to the same place you were in the other sheet, click on the sheet in the sidebar (the list of sheets/tables/charts/etc on the left). Don't click on the table, click on the sheet.

Auto show/hide Plug-in when switching between patches in Mainstage 2

Hi, I was wondering if there is a way to have Mainstage 2 automatically reveal a plug-in when switching between patches. For instance, when switching to a Clav patch, have it reveal the EVD6 plug-in. Then, if you switch to a Rhodes patch, it automatically closes the EVD6 and reveals the EVP88.

As far as I know, no. I haven't found a way to do this. It would be useful in certain setups.

Error when switching between drafts: "The instruction at "0x009f6487" ...

Running Contribute CS3 and get this error frequently when switching between documents in the Draft Console:
The instruction at "0x009f6487" referenced memory at "0x06bd7a24". The memory could not be "read".
Click on OK to terminate the program
Click on Cancel to debug the program
I do not get this error any other time. Only when editing multiple documents and switching between them. Clicking Save for Later on the toolbar, instead of clicking directly on the document in the Draft Console does not help.
Any help or suggestions are much appreciated.

Can you please try clearning the Contribute preferences?
To Clear the preference, quit Contribute, and then delete the Contribute CS3 folder in C:\Documents and Settings\<user>\Local Settings\Application Data\Adobe\ and also run the following command " reg delete "HKCU\Software\Adobe\Contribute 4.1" /f " if you are using Contribute CS3. Reconnect to the site and try the same scenario.
Note that, if you clear the preferences then no connection will be listed in Contribute, you need to recreate the connections. It will be like a fresh installation.

Switching between accounts in Mail 6.0

Hi there. Is there a gesture that allows me to switch between accounts in Mail 6.0, instead of viewing an account by clicking the inbox button. Sparrow use to do this but gesture have been disabled since lion. Does any one know how to restore these gestures in sparrow as well? I just upgraded to Mountain Lion from Snow Leopard. Thanks!

You can't do that. Sparrow was bought by Google and it won't be updated for get new features

Hanging when switching between programs?

Is there a soluton to programs hanging when switching between one program to another?

Safe Mode deletes some system caches that may help..
Startup your Mac in Safe Mode
A Safe Mode boot takes longer than a normal boot so be patient.
Once you are in Safe Mode, click Restart from the Apple () menu then try switching between applications.

Major delay when switching between folders in Mail

Similar Messages

Maybe you are looking for