MAJOR Desktop Issue ...

Hey mac fans, I own the a last gen. G5 Power Mac and an old G4 PMac. My issue is with the G4. I came back to it after it was off for a while during lunch and found when I started it up that I couldn't see the entire desktop on my screen. Instead, I could only see the right side of it. The left side is far off to the left, off the viewable part of the screen. I know there's more than I can see because I know there's a ton more stuff on my desktop, and plus I can see the cursor move off the screen when I go left. And if I open a finder window, only half of it appears on the screen.
So, I know what you're thinking: Go into System Preferences and fix the resolution which is messed up for some reason. Well, I'd love to, but when I click on the program, it opens off screen and I can't see where it is to drag it over. The dock is also on the left side, so I can't even use it.
I'm at my boiling point over here, I'm so frustrated. Has this ever happened to anyone? How can I get out of it ???
Thanks,
Johnny
PowerPC G4   Mac OS X (10.3.9)  
PowerPC G5   Mac OS X (10.3.9)  

Open the Script Editor in the /Applications/AppleScript/ folder and enter the following:
tell application "System Preferences"
set bounds of window 1 to {214, 34, 809, 506}
end tell
Press the Run button to move the System Preferences window. The first two numbers identify the upper left corner of the window, and the second two specify where the bottom right corner should be.
(16288)

Similar Messages

  • Major streaming issue!

    Hey Guys,
    I am having major streaming issues with my Macbook and Apple TV. Here is a detailed overview of my setup.
    Netgear 802.11G Router
    SSID off
    WEP 128 Bit hex key
    DHCP
    Wireless devices
    Powerbook G4
    Macbook
    Apple TV
    iPod Touch
    XP laptop
    Wired device
    XP desktop
    All these devices are able to access the wireless network fine - and have no problem connecting to the internet.
    Apple TV is running SW 2.0 - I don't know if the same issue would have occurred in SW 1.0 as I did the SW upgrade on it straight away (getting close to a system reset though)
    I am able to see the Apple TV in iTunes 7.6 and have all the details of my Apple TV.
    When I try to play any of "my movies" I sometimes get an error saying can't recognize file type or something along those lines - or it just gets stuck on a black screen with the buffering "spinning gear" winding till the Apple TV goes in to the screen saver.
    I tried on many different resolutions but it did not fix the issue.
    The same thing happens with TV Shows and Podcasts - haven't tried YouTube just yet.
    I am able to play movie trailers though both standard definition and high definition.
    Another thing to mention is the load up of the Apple TV is very jittering and stutters.
    The thing that makes me wonder is I ran it on another Netgear G router network earlier today and everything went fine - and I was able to playback videos that I am not able to do now - which kind of makes me look at the network - but the fact that HD trailers load almost instantly and play fine makes me think perhaps Apple TV? The fact it doesn't load smoothly concerns me.
    Any help would be greatly appreciated.

    I just removed Apple TV from iTunes and cleared an connections in "Computer" tab of Apple TV and reset everything - still the same issue.
    Apple TV loads very jittery and it doesn't load video files to playback - but it does playback music and movie trailers. I am guessing it has no problems with the trailers as that is not something that gets accessed via the Macbook. Really starting to think this could be a bandwidth issue know, just weird that it was all hunky dory on another G network! Besides all my laptops get full reception where the Apple TV is situated and I can't think of any interference in the position that it is in.
    Any other ideas people - don't want to have to shell out for a base station just right now.

  • Major performance Issues after upgrading to 10.9.2

    Hi,
    I have been having major performance issues almost preventing me from using the computer at times.  I suspect I don't have enough memory to run Maverick as the computer was great before I upgraded.
    If any experts or people with ideas for me to speed up the computer, please respond.  If you think the only way to improve performance is add memory or revert back to a previous version of OSX that I have a backup for, let me know.
    Here is the info on my system, thank you in advance!!
    Hardware Information:
              MacBook Pro (15-inch, Late 2008)
              MacBook Pro - model: MacBookPro5,1
              1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
              2 GB RAM
    Video Information:
              NVIDIA GeForce 9400M - VRAM: 256 MB
              NVIDIA GeForce 9600M GT - VRAM: 256 MB
    System Software:
              OS X 10.9.2 (13C1021) - Uptime: 3 days 21:20:10
    Disk Information:
              Hitachi HTS543225L9SA02 disk0 : (250.06 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        :c (disk0s2) / [Startup]: 249.2 GB (67.82 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MATSHITADVD-R   UJ-868 
    USB Information:
              Apple Inc. Built-in iSight
              Apple, Inc. Apple Internal Keyboard / Trackpad
              Apple Computer, Inc. IR Receiver
              Fitbit Inc. Fitbit Base Station
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information:
    Configuration files:
              /etc/sysctl.conf - Exists
              /etc/hosts - Count: 29
    Gatekeeper:
              Mac App Store and identified developers
    Kernel Extensions:
              [not loaded] com.LaCie.ScsiType00 (1.2.0) Support
              [not loaded] com.cisco.nke.ipsec (2.0.1) Support
              [not loaded] com.leapfrog.codeless.kext (2) Support
              [not loaded] com.leapfrog.driver.LfConnectDriver (1.8.1 - SDK 10.7) Support
              [not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.39) Support
              [not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.39) Support
              [not loaded] net.kromtech.kext.AVKauth (2.3.6 - SDK 10.8) Support
              [not loaded] net.kromtech.kext.Firewall (2.3.6 - SDK 10.8) Support
    Startup Items:
              CiscoVPN: Path: /System/Library/StartupItems/CiscoVPN
    Problem System Launch Daemons:
              [failed] com.apple.wdhelper.plist
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist Support
              [loaded] com.adobe.SwitchBoard.plist Support
              [running] com.fitbit.galileod.plist Support
              [loaded] com.google.keystone.daemon.plist Support
              [loaded] com.leapfrog.connect.shell.plist Support
              [loaded] com.microsoft.office.licensing.helper.plist Support
              [loaded] com.timesoftware.timemachineeditor.backupd-auto.plist Support
              [running] com.zeobit.MacKeeper.AntiVirus.plist Support
              [running] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist Support
    Launch Agents:
              [not loaded] com.adobe.AAM.Updater-1.0.plist Support
              [loaded] com.adobe.CS5ServiceManager.plist Support
              [running] com.brother.LOGINserver.plist Support
              [running] com.google.keystone.agent.plist Support
    User Launch Agents:
              [loaded] com.adobe.ARM.[...].plist Support
              [failed] [email protected]
              [loaded] com.macpaw.CleanMyMac.helperTool.plist Support
              [running] com.microsoft.LaunchAgent.SyncServicesAgent.plist Support
              [running] com.zeobit.MacKeeper.Helper.plist Support
    User Login Items:
              Google Chrome
    Internet Plug-ins:
              o1dbrowserplugin: Version: 5.3.1.18536 Support
              Google Earth Web Plug-in: Version: 7.1 Support
              Default Browser: Version: 537 - SDK 10.9
              Flip4Mac WMV Plugin: Version: 2.3.8.1 Support
              OfficeLiveBrowserPlugin: Version: 12.2.9 Support
              AdobePDFViewerNPAPI: Version: 10.1.9 Support
              FlashPlayer-10.6: Version: 13.0.0.201 - SDK 10.6 Support
              DivXBrowserPlugin: Version: 2.0 Support
              Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
              Flash Player: Version: 13.0.0.201 - SDK 10.6 Outdated! Update
              iPhotoPhotocast: Version: 7.0
              googletalkbrowserplugin: Version: 5.3.1.18536 Support
              QuickTime Plugin: Version: 7.7.3
              AdobePDFViewer: Version: 10.1.9 Support
              GarminGpsControl: Version: 2.6.4.0 Release Support
              SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 Support
              JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
    Safari Extensions:
              Dashlane: Version: 2.4.0.55923
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 2.0 - SDK 10.9
              AppleAVBAudio: Version: 203.2 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User Internet Plug-ins:
              Dashlane: Version: Dashlane 1.0.0 - SDK 10.7 Support
              Move_Media_Player: Version: npmnqmp 071705000010 Support
              WebEx64: Version: 1.0 - SDK 10.6 Support
              Picasa: Version: 1.0 Support
    3rd Party Preference Panes:
              Flash Player  Support
              Flip4Mac WMV  Support
              Growl  Support
    Time Machine:
              Skip System Files: NO
              Auto backup: NO - Auto backup turned off
              Time Machine not configured!
    Top Processes by CPU:
                   3%          WindowServer
                   2%          SystemUIServer
                   1%          diskimages-helper
                   1%          mds
                   0%          Google Chrome Helper EH
    Top Processes by Memory:
              94 MB          Google Chrome
              59 MB          GoogleSoftwareUpdateDaemon
              57 MB          Google Chrome Helper EH
              52 MB          Google Chrome Helper
              39 MB          Finder
    Virtual Memory Information:
              40 MB          Free RAM
              499 MB          Active RAM
              481 MB          Inactive RAM
              465 MB          Wired RAM
              7.33 GB          Page-ins
              502 MB          Page-outs

    The performance issues are due to third party software. Mavericks at the minimum requires 2GB's of RAM but I don't think that's the issue. And you can upgrade RAM anytime.
    MacKeeper should be uninstalled. It does far more harm than good.
    Do not install MacKeeper: Apple Support Communities
    Uninstall instructions > how to uninstall MacKeeper
    249.2 GB (67.82 GB free)
    Keep an eye on available disk space.
    Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac > More Info > Storage
    Make sure there's at least 15% free disk space. Less can slow your Mac down.
    You also need to uninstall CleanMyMac >  How To Uninstall CleanMyMac
    Third party so called Mac cleaning utilities are not necessary on a Mac. Your Mac runs maintenance in the background for you.
    Mac OS X: About background maintenance tasks

  • When opening safari i get a message that says major security issue please contact apple immediately suspicious activity might have been detected. what is this and how do i get rid of it so i can use my internet?

    when opening safari i get a message that says major security issue please contact apple immediately suspicious activity might have been detected. what is this and how do i get rid of it so i can use my internet?

    A misleading and malicious popup. Launch Safari with the Shift key held down; if that doesn't work, temporarily disconnect the computer from the Internet.
    (121307)

  • [Possible] Major Privacy Issue in Safari 5 - URL Autofill

    From what I read on the Apple site, the URL autofill compares what you type to your history. However even if you delete your history, the autofill still comes up with sites that you visited in the past. If I delete my history, where is this info coming from? Seems to me that this is a MAJOR security issue if you're not the only person using the computer.
    EDIT: Im seeing all sorts of random URLs popping up in the URL window when I type random letters. Is the URL bar also being used as a web search? (And if so, which search engine does it use for this?) I was under the impression it was only searching your history.
    At first I thought these random sites being suggested were sites I have visited in the past and forgotten about... in fact a lot of them seem like sites I would have visited.
    Its just so odd how random the results seem. Not just front pages come up, but pages a few levels deep on any given website. Strange thing this is to me.
    Message was edited by: Frozo

    I'm hoping someone will figure out a way to disable the URL history suggestions. It's totally annoying. I'm used to typing in the first few letters of a bookmarked web page to jump to it quickly. Now if I type some letters, I'm inundated with suggestions from keywords in my history, while the actual URL I'm trying to get to is buried beneath a list of other pages that have nothing to do with the page I'm trying to visit. Totally frustrating. Maybe it's good for some, but a way to turn it off is a must.

  • Major Color Issue

    I am having a major color issue in 10.3.9.
    Issue #1:
    Setting Color Labels...
    even though the names of the colors are there, the colors are actually shades of blue and gold.
    Issue #2:
    Mac Icon...
    normally on the dock, it's 2 shades of BLUE.. however on mine, it's 2 shades of GOLD.
    Issue #3:
    Adobe Programs...
    In Photoshop, Illustrator and Acrobat, ALL PHOTOS have this duotone look (blue and black) and the ONLY way to preview a photo in true color, is if I save for web and in that screen, it shows correctly. I'm a graphic designer and it makes it VERY difficult to adjust photos.
    I know its not the photos themselves, because they preview correctly when imported into Quark and also when printed. I have also tried switching monitors, to see if that was the issue and I still have the same problem. I had this problem back in January, when I upgraded to 10.3.9, and my supervisor fixed it through DUMB LUCK! I recently had to re-install everything, including the OS and this problem resurfaced. Now it's almost a year later and we've tried everything we could think of, but no such luck. This is my last hope!
    Does anyone know how to fix this problem, or has anyone ever HAD this problem? Is it just my negative energy that is feeding into it and making it want to lash out at me?!?!

    I am having a very similar issue, and am really pulling my hair out. I have one user that is having this problem - FROM ALL MACHINES! I have deleted ALMOST every preference in ~/Library/Preferences to no joy. Just started yesterday. (I am using network Home Folders - with no other major issues)
    Everything looks like it is in 8 bit color.
    I have done all the standard fixes. It does it no matter which machine this user logs into, so it is not a hardware or /Library/ issue. It definitely is a ~/ issue.
    PB G4 Al (2), MDD G4 Dual (3), AGP, Cube, W3K Server, B&W G3 Server & others (in   Mac OS X (10.4.8)   Server 10.3

  • Two Macbooks, same spec, yet one has major connectivity issues

    Hi,
    I have two (old - 2006) macbooks, bought at exactly the same time, exactly the same spec, probably off the same factory line. Yet one has serious Airport issues which are proving very difficult.
    It will pick up a maximum of one wireless network, which it barely is able to connect to. There are 3 wireless networks in this house yet it only picks up the nearest one. The other macbook can pick up at least 15 other networks despite being exactly the same spec and on the desk next to it.
    Even when it connects to my network, connections are frequently dropped - over 50% packet loss generally.
    Both are running the same OS and are exactly the same spec. I have tried resetting the PRAM, deleting the airport prefs, resetting the SMC; you name it I've tried it. I noticed that this is quite a common issue with Snow Leopard + Airport, but I am now thinking it could be a faulty Airport card. Could this be the case?

    You already mentioned that you thought that "it could be a faulty AirPort card". I agreed and offered another possibility as well.
    Whether or not you are using Snow Leopard, if you have a faulty wireless card or a faulty antenna connector, you will most certainly have major connectivity issues.
    You've already performed all the standard troubleshooting steps and mentioned that you felt it may be a hardware issue.
    If you have changed your mind and feel that it's a Snow Leopard issue, (logic would dictate that it would have also affected your other identical computer the same way) you have the option of reinstalling the operating system to see if that might help.

  • I'm experiencing major synchronisation issues on ICloud, especially for documents created on my Mac in pages, keynote and numbers. Contacts and agenda items work fine. I checked all my account settings.

    I'm experiencing major synchronisation issues on ICloud, especially for documents created on my Mac in pages, keynote and numbers. Contacts and agenda items work fine. I checked all my account settings. But while I can upload documents from my MAC onto ICloud, they don't show on my IOS devices (whereas previously this worked without issues).

    On this Mac I did move all the visible iCloud documents out of iCloud, into another folder, then disabled syncing, exactly as you suggested.  But there were, apparently, documents remaining in my Mac's local iCloud store, "~/Library/Mobile Documents/" that I could not see (so could not remove). The Pages file "CSU-PD-UN1.pages" was one such document.
    The act of disabling iCloud's document sync'ing, in System Prefs, just renames the local "iCloud" store to "~/Library/Mobile Documents/<appleid#>/" effectively shielding the it from the sync'ing mechanism.  Looking at this renamed folder (the screenshot above) revealed that "CSU-PD-UN1.pages" (and other files) had not been removed; it would be reasonable to assume that one, or more, of these "undeletable" files were related to my original problem, and when I re-enabled doc sync'ing, those bad files would just clog up the works again.
    So I deleted them with the Finder on both Macs (the other Mac had bad files too, but different ones), then re-enabling sync'ing on the two Macs and doc sync'ing between the Macs (and iCloud.com) appears to now work as intended.
    Sadly, iOS devices (iPhone and two iPad) now do not sync at all.  Newly created documents do not migrate to any other devices, and documents on other devices do to migrate to the iOS devices.
    Your suggestions have certainly done some good, but something is now keeping my iOS devices out of the the iCloud doc sync'ing process.  I suspect it's a similar problem as the Macs had ("invisible" files gumming up the works), so I'm going to apply some nasty tricks to explore the iOS devices file system and see if I can find them, and delete them by brue force.

  • Major download issue on 2nd desktop

    When logged in to my original desktop I can access itunes and download no problem. However when I try and use it in the second desktop I've recently set-up...nothing. Can't download a thing. It just gets stuck and the system seems to create endless copies of the same items qued for download.
    I've recently purchased a movie from iTunes but can't download it direct from the store to this new desktop. I've tried to access it on my iPhone since, but it doesn't show in my purchased items.
    This is really killing me. What's the issue?

    This Wifi app installation issue seems to be a software bug that has to be addressed by their software engineering.  The technical support team has no clue how to resolve it.  It installs fine on a Win7 machine if it is an initial install.  The issue is for subsequent install after your account has been set up as the account id is not being passed through. 
    Verizon WiFi hotspot seemed to be around since 7/2009.  I am surprised after 4 years, Verizon doesn't know and has not addressed it.  Win7 has been around since 6/2009.  Wifi App does not run on Win8.  Many people still use Win7.  I hope Verizon is reading this and really do something.  Somewhat disappointing experience.   Notice no Verizon moderator replied to this thread.
    For those who want to pursue further. The direct Verizon Mobile WiFi support number is 877-346-3053.   If you call the regular support number, it will take your several bounce to get to the right place.   I spent a whole afternoon with them on this. 

  • [SOLVED] Major weird issues with KDE/Qt apps and unicode

    Hi, I've tried to search for my problem, but nothing has showed up, so if this has already been answered, please forgive me.
    Anyway, I use KDE as my primary desktop environment with SKIM as my unicode input method. After installing SKIM and Japanese fonts back when I first set Arch up, I have never had any issues with inputting unicode or displaying it in any program, whether that be irssi running through Konsole, or the song titles in Amarok. That all changed this afternoon, somehow...
    The only major changes I can remember making to my system today are the following:
    1.) I installed Awesome Window Manager to check it out
    2.) I installed a pkgbuild of urxvt
    3.) I made an .Xdefaults file and added these lines to customize my urxvt
    After messing around with these things, I decided that Awesome wasn't a suitable WM for me, went back into KDE, and removed the package. I noticed a few strange issues after that though:
    1. Foreign characters refuse to display properly in any terminal emulator.
    2. Foreign characters come up as jumble in Konqueror now as well, when they never did before:
    3. SKIM refuses to let me input Japanese characters with Anthy in any KDE app. The option for Japanese just isn't there, even though I have it installed:
    4. Foreign characters display perfectly as tags for songs in Amarok, but if the music file itself has foreign characters in it, the title is garbled and the track is unplayable:
    5. SKIM works absolutely fine in non-KDE apps like Firefox:
    As seen in the last example, my Japanese fonts are all installed, and SKIM is working as it should in any non-KDE app, suggesting that there are no problems on that end. The issue seems to be with something in KDE, but I have no idea where to begin fixing it. Furthermore, I have no idea what could have caused this issue in the first place. I don't see how installing a window manager or terminal emulator package could have screwed up my fonts, and the .Xdefaults file I wrote just contained config information for urxvt. Nothing else. I even ended up deleting that, but it did not fix my problem.
    If you could be of any help, I'd really appreciate it. I have a lot of files with foreign characters in them, and being able to read them is essential.
    Last edited by LighthouseKeeper (2008-04-20 00:57:36)

    I was just looking into locales, actually.
    My current locale is:
    LANG=en_US.utf8
    LC_CTYPE="en_US.utf8"
    LC_NUMERIC="en_US.utf8"
    LC_TIME="en_US.utf8"
    LC_COLLATE=C
    LC_MONETARY="en_US.utf8"
    LC_MESSAGES="en_US.utf8"
    LC_PAPER="en_US.utf8"
    LC_NAME="en_US.utf8"
    LC_ADDRESS="en_US.utf8"
    LC_TELEPHONE="en_US.utf8"
    LC_MEASUREMENT="en_US.utf8"
    LC_IDENTIFICATION="en_US.utf8"
    LC_ALL=
    and locale -a brings up:
    C
    POSIX
    en_US.utf8
    Is there anything here that could be causing this issue?
    I'm curious how my locale got messed with in the first place if this is indeed the problem...
    and here is my export:
    declare -x COLORTERM=""
    declare -x DESKTOP_SESSION="kde"
    declare -x DISPLAY=":0.0"
    declare -x DM_CONTROL="/var/run/xdmctl"
    declare -x GS_LIB="/home/rael/.fonts"
    declare -x GTK2_RC_FILES="/etc/gtk-2.0/gtkrc:/home/rael/.gtkrc-2.0:/home/rael/.kde/share/config/gtkrc-2.0"
    declare -x GTK_IM_MODULE="scim"
    declare -x GTK_RC_FILES="/etc/gtk/gtkrc:/home/rael/.gtkrc:/home/rael/.kde/share/config/gtkrc"
    declare -x HOME="/home/rael"
    declare -x KDE_FULL_SESSION="true"
    declare -x KDE_MULTIHEAD="false"
    declare -x KDE_SESSION_UID="1000"
    declare -x KONSOLE_DCOP="DCOPRef(konsole-19951,konsole)"
    declare -x KONSOLE_DCOP_SESSION="DCOPRef(konsole-19951,session-1)"
    declare -x LOGNAME="rael"
    declare -x OLDPWD
    declare -x PATH="/opt/kde/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin:/usr/games"
    declare -x PWD="/home/rael"
    declare -x QT_IM_MODULE="scim"
    declare -x SESSION_MANAGER="local/broadway:/tmp/.ICE-unix/19566"
    declare -x SHELL="/bin/bash"
    declare -x SHLVL="2"
    declare -x SSH_AGENT_PID="19539"
    declare -x SSH_AUTH_SOCK="/tmp/ssh-MtdHR19538/agent.19538"
    declare -x TERM="xterm"
    declare -x USER="rael"
    declare -x WINDOWID="41943050"
    declare -x XCURSOR_THEME="default"
    declare -x XDM_MANAGED="/var/run/xdmctl/xdmctl-:0,maysd,mayfn,sched,rsvd,method=classic"
    declare -x XMODIFIERS="@im=SCIM"
    Last edited by LighthouseKeeper (2008-04-19 22:31:16)

  • Creative Cloud Desktop issue: "you've been signed out" when trying to sign in

    Hi,
    Following the resolution guide for this issue on the adobe site, I have deleted the opm.db file from the oobe folder.  But the issue still remains.
    Steps carried out
    Quit the app
    Deleted opm.db file
    launched the app
    signed in
    same error
    I have also done a restart after deleting the file.
    I also reinstalled the application.
    Is this issue due to the maintenance?  My Colleague has the same issue.
    Thanks in advance for your help.

    Hi All,
    Issue:
    When you launch the Creative Cloud desktop app, a "You've been signed out" message appears.
    Troubleshoot points of note.
    Mac Mavericks OS
    This is happening on two Macs – regardless of user credentials used
    This works using the user’s credentials from a PC using the windows Creative Cloud Desktop App
    Creative Cloud Desktop successful downloaded one app on the 16/06/2014 to the Mac
    Adobe’s Resolution
    https://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
    Also tried renaming another folder – AAMupdater in the Adobe folder, as suggested on an Adobe Forum
    Deleted OOBE folder in a second location (location that differs from that in the guide above)
    Also used the Creative Cloud Cleaner to tidy up installation files
    This issue is still on going and I have submitted a log to Adobe Tech for analysis on User: Daniel above.
    If anyone has a solution please let me know.

  • 2012 rMBP Desktop Issue w/ Mavericks

    Hi all,
    I'm on a 15" retina macbook pro from 2012, and use multiple desktops for different applications. Ever since I upgraded to Mavericks, dekstops 2 and 3 have been randomly switching places, which is getting very annoying. While it's not an enormous issue, it messes with my workflow, and just generally is frustrating. Anyone else experiencing anything similar? If so, has anyone found a fix?
    Thanks!

    Thanks! Was this a setting in Mountain Lion? If so, I wonder why it never affected me before. Regardless, seems like a rather silly setting for people like me... obviously it tends to totally screw us up!

  • New infinity line and major speed issues with almo...

    Hi,
    Just has infinity installed after moving from my previous FTTC provider.  With the previous provider i was getting 16 down / 1-2 up and it worked great.
    Had my my new inifnity line put in on thrsday and i am getting 17 down / 0.5 up!! 
    I work from home and connect to the office via vpn and remote desktop and its almost unusable.  Laggy, slow, unrepsonsive and is constantly dropping the connection with a failed to read from socket error and is making it very difficult to work form home effectively.
    I have a 4g EE modem also and if i switch to this it is like lightening compared.
    I also had absolutely no connection issues with my previous provider and as i posted above had a mich better uplink speed - which is where i think im getting most of my issues.
    When i signed up to BT this is what i was sent via email:
    We estimate your download speed will be 19.1Mb.
    We estimate your upload speed will be 3.9Mb.
    Im fine with the download but the uplink is shocking compared to the estimate - and as i had much better before i think something is amiss.
    Also when i signed up i was told that if i had any connection issues with the new line i had to notify BT within 7 days and it woudl eb investingated but it seems there are so many roadblocks to creating support tickets etc.. Its like it s been hard to report a fault on purpose.
    Where can i create a support ticket or similar to get this looked at?
    Thanks
    Damian

    dgreenuk wrote:
    Hi,
    I work from home and connect to the office via vpn and remote desktop and its almost unusable.  Laggy, slow, unrepsonsive and is constantly dropping the connection with a failed to read from socket error and is making it very difficult to work form home effectively.
    Thanks
    Damian
    As you use the internet for work purposes did you have business broadband with your previous provider ?
    This is the Residential forum. You may be better posting on the BT Business forum.
    Best regards,
    dfenceman

  • Discoverer Desktop Issues 10.1.2

    Hi,
    I am using Discoverer Admin and Desktop both of Verions 10.1.2
    I have no issue with Admin; I could do successfully all the work here.
    In Desktop i have login successfully as Application user; and created simple Order Report workbook (Order_Report.DIS) and saved it.
    Again when i login as application user in desktop; When i try to open my existing workbook (Order_Report.DIS); It will prompt me
    Do you want to run the query for the sheet Ord_report; Yes/No; If i select option as Yes i am getting error mesg as Failed to connect to database; If i choose No I will get empty sheet; In either case I will see empty sheet appears; From the Tool Bar if i select Sheet --> Refersh Sheet; I am able to see records in my sheet.
    When i continue working on this sheet; All of sudden i get error screen as Oracle Discoverer Desktop has encountered a problem and needs to close
    Basically i have two problems in desktop
    1. When I open workbook i get error as Failed to connect to database
    2. All of sudden i get vague error as Oracle Discoverer Desktop has encountered a problem and needs to close
    I would appreicate if some one can help on this.
    Thanks!!
    Uday

    Hi,
    I have the same issue with Discoverer Plus 10g Rel 1 (10.2.0.2 )
    Desktop and Administrator are working good. So, I cannot resolve it by re-installation.
    Also, this is not reproducible. Sometimes it works very smoothly, but sometimes it gives error for the same report.
    Any idea ?
    Thanks!
    Yogini

  • Need help for desktop issue

    Hi all, i need help urgently. my desktop has nothing on it but when i get info it shows that desktop is using over 10GB of disk space and counting. does anyone knows what is going on as my available disk space getting lesser as the day goes by.

    Hi,
    I also have issues with my desktop - the iDisk was not syncing.
    I opened the desktop folder on a window, and it showed zero items, when I have the HD and LaCie hardrives showing on the desktop. The iDisk does not show on the desktop as it should. However, the desktop folder showed other items such as files saved on the desktop.
    Here's what happened last week: I received an e-mail from an airline saying that my ticket was approved - it was from an actual airline so i made the BIG mistake of opening the link only to find a bunch of scrambled characters - i immediately figured out that it was a bomb/virus/scam to destroy the computer, and after that i had problems with Entourage (had to call support to solve the issue) and now with syncing iDisk the 0-items desktop folder. Are they related or just coincidence? Who knows....
    And here's the sad part: I tried your suggestion and it didn't work. I opened the desktop folder and still shows 0 items; the iDisk still not appearing on the desktop automatically (as it should) and still "failed to sync"; and I am still frazzled/puzzled.
    Here's the messages in the terminal:
    Last login: Sun Sep 23 08:04:14 on console
    Welcome to Darwin!
    [Tocantinss-Computer:~] tc%
    [Tocantinss-Computer:~] tc% ls -alh desktop
    total 1088
    drwx------ 6 tc staff 204B Sep 22 14:21 .
    drwxr-xr-x 25 tc staff 850B Sep 23 08:04 ..
    -rw-rw-rw- 1 tc staff 42K Sep 22 14:21 .DS_Store
    -rw-rw-rw- 1 tc staff 496K Sep 20 2003 .FBCIndex
    drwxrwxrwx 3 tc staff 102B Sep 20 2003 .FBCLockFolder
    -rw-r--r-- 1 tc staff 20B May 2 2002 Icon
    [Tocantinss-Computer:~] tc%
    [Tocantinss-Computer:~] tc% defaults write com.apple.finder AppleShowAllFiles -boolean true; killall Finder
    [Tocantinss-Computer:~] tc% defaults write com.apple.finder AppleShowAllFiles -boolean true;killall Finder
    [Tocantinss-Computer:~] tc% defaults write com.apple.finder AppleShowAllFiles -boolean false;killall Finder
    [Tocantinss-Computer:~] tc%
    Do you have any other suggestion or solution?
    Thank you so much.

Maybe you are looking for