Major difference between WRT300N & WRVS4400N

Hi,
I'm a newbie to wireless networking. I want to buy a pair of routers connecting my two sites (called them site A & site B).
At site A, I have two P4 class PCs & one PII PC. I used the 2 P4 PCs to browse internet. The PII PC had P2P application running continuously. I would like to put the PII PC in DMZ. The site connected to internet via 10Mbps link.
At site B, I have one PII PC also running P2P application running continuously. I intend to add one P4 PC running web cam services. I intend to put PII PC in DMZ. The site connected to internet via 10Mbps link
Most time I will stay at site A and need to access site B computers via VPN channels. I would like to share site A & site B's internet connections via Linksys routers and install wireless LAN adapters in the three P4 PCs.
I found WRT300N & WRVS4400N model may suit my needs. However, from the user guide found at Linksys web site, I saw no significant difference in their functionality and supported features --- I mean in 802.11x standard support, firewall & VPN functionality and intrusion prevention system support.
I would like to ask besides authentication & IP versions support, what are the major difference between models ? Do these models suit my requirement ?
Also, I found no figure stated in user guides or specification sheets telling how many wireless device could access the router at maximum ?
Besides, I would like to ask if another model WRT54G supports VPN functionality ?
Thanks for help

hi , the major difference between the WRT300N and the WRVS4400N is ,
The WRT300N is a VPN passthrough....meaning this router will just pass the VPN traffic if the VPN passthrough is enabled or when u manually forward the VPN ports....same case wirth the WRT54G
The WRVS4400N is a VPN endpoint....meaning that you can use this router to create Point to Point VPN tunnels ....dedicated tunnels so your data is secure...
The authentication and IP versions support are the same on both models..
As far as the wireless is concerned.....each router will support a max of about 32 wireless clients...
let me know if you need any more information

Similar Messages

  • What are the major differences between 4.6 C, 4.7 and ECC6 Versions

    Hi,
    Please can any boyd explain me the major differences between 4.6C, 4.7 and ECC6 Versions...
    Regards
    sankar

    Hi,
    go to this website
    http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx
    enter your
    Source release , target release and the module to know more.
    Thanks
    Ashok

  • What are the major differences between UCCX v7 and v8.0.2

    Does anyone know of a matrix or document which shows the major differences between UCCX v7 and v8.0.2?
    I have looked high and low, even searched this forum, but have not found anything.
    I've even looked at release notes in 8.0.2 but couldn't see anywhere that states the changes.
    Any help appreciated.

    Hi,
    I have awarded you both with the 'correct answer'.
    I went through, painstakingly, the documents I was linked to above and compared.
    In the end the major differences are pretty much what you have outlined here - which is exactly what I wanted.
    Thank you both very much.
    Cheers,
    Brett
    PS: Here are the obvious differences I found going thru the documentation I was linked to... (pretty much what you said)
    Feature
    V7
    V8
    High   Availability over the WAN (HAoWAN)
    No
    Yes
    Available in   an Appliance Model
    No
    Yes
    Read-only access to Cisco Unified Contact Center Express   database (Informix) with JDBC, ODBC, or Structured Query Language (SQL)
    No
    Yes
    System   Software Configuration
    MS Windows Server   2003
    Cisco Media   Convergence Appliance Software
    System   Software Configuration (client)
    XP and Vista
    XP, Vista, and Win7
    System   Software Configuration (browser based client software)
    No
    CAD and Workforce   Management
    System   Software Configuration (Web 2.0 based client software)
    No
    QM and AQM
    Operating   System
    Cisco OEM Windows   Server 2003
    Cisco Voice OS

  • What are the major differences between a Access Switch and Aggregation Switch w.r.t Carrier Ethernet domain?

    In a Carrier Ethernet domain,Could someone please help me understand what's the basic difference between Access Switch and Aggregation Switch both in terms of s/w and h/w functionalities. MEF deals OAM,CFM, EVC provisioning only at the access edge switches. Do we need to repeat all these at the aggregation level? or  is it just used for routing purpose? Do we have a separate Fault Management at the aggregation level?

    Duplicate posts.  :P
    Go here:  https://supportforums.cisco.com/discussion/12137156/what-are-major-differences-between-access-switch-and-aggregation-switch-wrt

  • What are the major differences between the 4.7 and ECC5 or 6   ?

    Hi Abapers,
                            Can anyb one answer this question ....
    what are the major differences between the 4.7 and ECC5 or 6    ?
    Thank's,
    Siri

    Tan,
    we have solution for this question on previous pages.

  • What are the major differences between BODS and Talend ?

    Hi Friends,
    We had a client meeting 2 days back regarding BODS project, But our client is showing more interest on Talend. We have explained/demo him on BODS.  Could any one please tell me, What are the major differences between BODS and Talend ? What are the features of BODS which are not there in TELEND ?
    Thanks,
    Bheem.

    Hi,
    If you talk difference than Talend is an open source. SAP DS as huge advantage when it comes to loading data into SAP and it is more flexible with lots of inbuilt features and easy to load data into SAP using DS directly and extracting data from various legacy systems.

  • What are the major differences between oracle 10g and oracle express 10g

    Hi
    Can anyone tell, What are the major differences between[b] oracle 10g and oracle express 10g.
    Or if you know any URL, then please do let me know.
    Advance Thanks
    JC

    Dear sir,
    here it is.
    http://www.oracle.com/database/product_editions.html

  • What are the major differences between 4.7 and ecc5.0

    hi all
    What are the major differences between 4.7 and ecc5.0
    regards
    JK Rao

    Hi,
    Good morning and greetings,
    Please use the following link
    http://solutionbrowser.erp.sap.fmpmedia.com
    Please reward points if found useful
    Thanking you
    With kindest regards
    Ramesh Padmanabhan

  • What are the major differences between the air and the pro

    what are the major differences between the air and the pro?

    In a nutshell, the Air is a lightened, more compact system than the 13" Pro counterpart. The Air loses some hardware features to accommodate the physical downsizing.
    No FireWire port
    No built-in optical drive
    A lesser performing CPU to retain battery charge life, and adequate cooling.
    No Ethernet port
    No Kensington lock slot
    The Air does have a superior native resolution at 1440 x 900, and a standard SSD that does make up alot of the speed differential, and then some. Of course, the 13" Pro can be optionally configured with an SSD.
    You buy the Air if the physical size an weight savings are demonstrably more important than the features lost.

  • What are major differences between SAP BI and Oracle BI?

    Hi Experts,
    I am new to Oracle BI. But I want to know about major differences between SAP BI and Oracle BI?.
    Please help me....
    Thanks & Regards,
    A. kavya kumari.

    There are at least five major differences :
    S P O r c l e
    but important to also be aware of the minor difference:
    A/a

  • What is major difference between oracle 9i and 10g

    hi ,
    I hv read some documentation of oracle 9i and 10g ,but i dont understand what is major difference between oracle 9i and 10g .

    Its not the difference, but its the additional feaures.
    There are many more feature in every aspect of database. which area are you specifically looking for..
    I would reccomned a following doc on OTN
    Oracle® Database New Features Guide 10g Release 2 (10.2)

  • Major differences between GL and New GL concepts

    Hai,
    Please let me know the major differences between old and new gl concepts and if possible explain with few examples....
    Thanks in advance.....
    Regards
    Moderator: Please, read and respect SDN rules

    Hi
    Refer to the link below-
    http://www.sap.com/solutions/business-suite/erp/financials/pdf/BWP_New_Gen_Ledger_Acct_Functions.pdf
    Regards
    Milind

  • What is the major differences between SAP CRM 4.0 and SAP CRM 5.0?

    Dear all,
    Please let me know the major differences between CRM 4.0 and CRM 5.0 versions?
    Your suggestions will be highly appreciated.
    Thank you
    Raghu ram

    Hi Raghu,
    In order to find out the differences between SAP CRM 4.0 and SAP CRM 5.0, you will find no better documentation than the release notes availalble at the following link:
    [https://websmp204.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000429833&_SCENARIO=01100035870000000202&]
    There are several functional improvements, and lot of new functionalites and also better integaration points with SAP ECC. Some of the new features like Visit Planning, Warrenty Claims, Enhanced and easy configurable/ customizable IC Webclient, New concept of Marketing Organization in Org Model. For further information, go through the release notes.
    regards
    Srikantan

  • What are major differences between the T5 and the T5i

    What are the major differences between the T5 and the T5i?

    Hey everyone!
    I just wanted to step in (which is not normal) to say something that most people overlook is that the EOS Rebel T5i has a self-cleaning sensor where the EOS Rebel T5 does NOT; also, the T5i can use an IR Remote (like the RC-6), and the T5 can only use cable releases. These are minor things until you need them! 
    I hope those two little things help!
    Oh, and here is the compare info: CLICK ME

  • Major differences between SAP BW & BI

    What are the major difference between SAP BW & BI

    1. In Infosets now you can include Infocubes as well.
    2. The Remodeling transaction helps you add new key figure and characteristics and handles historical data as well without much hassle. This is only for info cube.
    3. The BI accelerator (for now only for infocubes) helps in reducing query run time by almost a factor of 10 - 100. This BI accl is a separate box and would cost more. Vendors for these would be HP or IBM.
    4. The monitoring has been imprvoed with a new portal based cockpit. Which means you would need to have an EP guy in ur project for implementing the portal !
    5. Search functionality hass improved!! You can search any object. Not like 3.5
    6. Transformations are in and routines are passe! Yess, you can always revert to the old transactions too.
    7. The Data Warehousing Workbench replaces the Administrator Workbench.
    8. Functional enhancements have been made for the DataStore object:
    New type of DataStore object
    Enhanced settings for performance optimization of DataStore objects.
    9. The transformation replaces the transfer and update rules.
    10. New authorization objects have been added
    11. Remodeling of InfoProviders supports you in Information
    Lifecycle Management.
    12 The Data Source:
    There is a new object concept for the Data Source.
    Options for direct access to data have been enhanced.
    From BI, remote activation of Data Sources is possible in SAP source systems.
    13.There are functional changes to the Persistent Staging Area (PSA).
    14.BI supports real-time data acquisition.
    15 SAP BW is now known formally as BI (part of NetWeaver 2004s). It implements the Enterprise Data Warehousing (EDW). The new features/ Major differences include:
    a) Renamed ODS as DataStore.
    b) Inclusion of Write-optmized DataStore which does not have any change log and the requests do need any activation
    c) Unification of Transfer and Update rules
    d) Introduction of "end routine" and "Expert Routine"
    e) Push of XML data into BI system (into PSA) without Service API or Delta Queue
    f) Intoduction of BI accelerator that significantly improves the performance.
    g) Load through PSA has become a must. I am not too sure about this. It looks like we would not have the option to bypass the PSA Yes,
    16. Load through PSA has become a mandatory. You can't skip this, and also there is no IDoc transfer method in BI 7.0. DTP (Data Transfer Process) replaced the Transfer and Update rules. Also in the Transformation now we can do "Start Routine, Expert Routine and End Routine". during data load.
    New features in BI 7 compared to earlier versions:
    i. New data flow capabilities such as Data Transfer Process (DTP), Real time data Acquisition (RDA).
    ii. Enhanced and Graphical transformation capabilities such as Drag and Relate options.
    iii. One level of Transformation. This replaces the Transfer Rules and Update Rules
    iv. Performance optimization includes new BI Accelerator feature.
    v. User management (includes new concept for analysis authorizations) for more flexible BI end user authorizations.
    Hope it helps..
    assigning points is how people say thanks in SDN

Maybe you are looking for

  • Error in Decimal places.

    Hi Experts, my client is using ECC 5.0 now we have the problem with decimal places when the customer posts the transaction with USD,the problem is rising. For Ex: If the PO is raised in USD 500,but the system is updating only as 50 USD. Your valuable

  • How do I create an FSDIAG file on Linux systems?

    QuestionHow do I create an FSDIAG file on Linux systems? AnswerTo create an FSDIAG file for the Linux Security product: Go to a working directory to which the fsdiag.tar.gz file will be created. Run the following command: # /opt/f-secure/fsav/bin/fsd

  • Cl_gui_frontend_services= file_save_dialog?

    Hi All, Im trying to use the below method, what are all the parameters need to fill and hw to declare those parameters. CALL METHOD cl_gui_frontend_services=>file_save_dialog EXPORTING    WINDOW_TITLE         =    DEFAULT_EXTENSION    =    DEFAULT_FI

  • When you go into sites everything is too big for the pages,including home page

    everything is too big too see on screen

  • Customer system voice mail operator Prompts in CUE V3

    Hello, Is there a way to modify the system voice mail operatator prompts wave files (which are played if the caller does not hang up after leaving a voice mail for a subscriber). Thanks!