Major glitches with Notes!

I tried to get into using the Notes application on my Macbook, but i have experienced a number of glitches. I got a new iPhone 4s and now the application refuses to run on my Macbook altogether if i click on "New Note." I can click on any other note, but the instant I click on a note that i made that was called "New Note" the application closes. Is there anything that can be done? I like the ease of use of Notes and its simplicity, but I can't put my information on it if I can't depend on it.

I'm assuming you're using iCloud to store your notes, since you mention your iPhone here.
I had a somewhat different issue with Notes, but this (largely from another discussion) helped me:
... I found this solution on another thread(https://discussions.apple.com/thread/4137558?start=0&tstart=0). This person actually called Apple and was told to follow these steps:
Click on mac HD/ library /caches. drag all the contents in the folder to the trash
Click on the finder click go, hold the option key and click on libraries (will not appear if you don't hold the option key). go to the caches folder again and again drag everything in the folder to the trash.
Go to your Finder "Go" menu hold the option key to choose "Library". Then go to Containers folder and find and delete com.apple.Notes/Container.plist
Restart your computer.
Empty trash.
Try to open notes again.

Similar Messages

Major glitches with Encore CS6 on Mac

Hi, I am having a major problem with Encore CS6 on mac. Whenever I have tried to build a DVD (using a DVD+R disk in the superdrive of my MBP) it makes my screen glitch, and my computer freeze up.
I would appreciate it if you could help me with this ASAP because I need to have this project done no later than the 20th of December.

I'm running OSX 10.8 Mountain Lion on my mid 2012 Macbook Pro with 16Gb of Ram, and a 2.6GHz dual core i7 processor.
What do you mean by build to a folder or image? (I'm still relatively new to Encore.)
Here's what keeps happening

2.2 major glitch

Hi all,
I've been reading a number of threads all with a similar theme and I think Apple have a major glitch with 2.2.
A few days ago I upgraded to 2.2 after which I noticed that I couldn't make or receive calls anymore. Like a large number of contributors to the site everytime I try calling someone the 3g signal goes after the first couple of rings and then the call fails. If someone tries calling me the phone sometimes shows the number (sometimes it doesn't) but then declines the call, other times the call will go straight to voicemail.
Now I have tried literally every suggestion made on this forum- reset, restore and create new accout, drain battery,change sim, call carrier, try sim in another phone, reinstall iTunes etc...nothing fixes this problem.
I'm convinced it's a problem with 2.2. I want alert Apple and ask them to investigate now!!
I'm taking my phone to a service centre tomorrow and im sure it will be gone for week, which is a major
inconvienience that could be avoided for other users if Apple just fixed the glitch with 2.2.
Rob

The firmware you downloaded was exactly the same as the one I downloaded and mine is working perfectly. The conflict is with something that sits on the device, or something the device is trying to communicate with. Erase all data on the phone via settings/general/reset, set up as a new phone and sync nothing at all, not one thing. If the issue continues then I believe it's a baseband software conflict, and it could be conflicting with the carriers 3G digital signal.

Tap to click not working properly in Mountain Lion. How do I get apple to fix this major issue with mountain lion?

The tap to click does not work with mountain lion as it did before the mountain lion install. I purchased a brand new imac in August of 2011 and got a wireless keyboard and selected the wireless trackpad instead of a mouse. The trackpad worked wonderful pre upgrade with tap to click. Now after the install of the newest beast, I have to actually press the trackpad rather than a slight tap. I have carpel tunnel and this is causing great stress upon my hand. How do I get apple to fix this major issue with mountain lion?

Perhaps, I was not clear enough.
I have an imac purchased in Aug. 2011 which came with Lion 10.6 (two uprades before mountain lion)
Recently, I just purchased a macbook pro retina with Mountain Lion
On my imac, my settings allowed me to "tap to click" everything EXCEPT the initial log in at the star up of my imac, again running Lion 10.6
On my macbook pro retina which has Mountain Lion, I set up the "tap to click" option, but notice that a "hard" click was neccessary when trying to click things. I thought this was a macbook thing (my first one) so I went and upgraded my imac to Mountain LIon, BIG MISTAKE! Now both my imac AND my macbook only have limited "tap to click" options. Before mountain lion I could "tap" to highlight and select text, tap and drag, and many other thiings that Mountain Lion has disabled.
I am truly surprised that no one has noticed this MAJOR issue.
Is there a way to uninstall this update, similar to how on a PC you can go back to a restore point.
On another note even the way PREVIEW has changed is less user friendly, there used to be icons on the bottom right corner of the screen, now I have to double tap and select the option I would like to switch between contacts and thumbnails. This is really annoying and is causing me time when reviewing files.
Just in case anyone was wondering, I did go to system preferences -> trackpad -> select tap to click
In fact almost all of the trackpad functions have been selected.

Whenever I have a pdf document open, and then switch to another tab to view another webpage, the scrolling function on the touchpad will not work. This seems to be a glitch with Mozilla, according to Dell. How do I fix this?

When I open a pdf document (like an E-version of a newspaper) in Mozilla and then switch to another tab to view another webpage, I am unable to use the scrolling function on the touchpad. I have to use the up and down arrows to get other pages to scroll. When I close that pdf document, everything works fine. I talked with customer support with Dell, and he said it was probably a glitch with Mozilla. So I tried to do the same thing on IE, and there was no problem scrolling with the touchpad while a pdf document was open on another tab. I would like to get a fix for this so I don't have to keep closing open pdf documents in order to scroll with the touchpad while on other tabs. Thank you

Hi elliezzz,
If you are having issues with your iPhone not being recognized by iTunes, you may find the following article helpful:
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Regards,
- Brenden

I bought an iphone 5 in the United States. It has major problems with the video. In Italy not fix it. What am I to do?? back in the United States

I bought an iphone 5 in the United States. It has major problems with the video. In Italy not fix it. What am I to do?? back in the United States

The iPhone warranty is not international. If you bought it in the US you can only get service in the US. You will need to take it in to an Apple store in the US.

TS1398 can i possibly download from iOS 6 back to iOS 5? there are so many glitch with this new iOS 6, iTunes does not automatically syncing with my iPad2. Messages keeps on logging out, I have to log in again and again, including Facebook it is also acti

I am very excited with this ios 6, but now am very regretful that why did i updated my ios because the new ios 6 did not live up to my expectations, Youtube was gone, iTunes cannot automatically sync with my iPad, iMessages is logging out automatically, even facebook is acting wierd. facetime connection is very poor there are so many glitches with this ios 6. And I know that it is impossible for me to turn back safely to ios 5.1.1 now. Are there any suggestions you can give me? I just want my iPad 2 back to its normal and efficient stage again. Thanks

I am sorry to tell you that Apple does not provide a downgrade path for iOS. There are unsupported methods for doing so, but we are forbidden to provide that information on these forums.

Major Problem with Multiple External Hard Drives! Watch Out!

I've almost completely given up on Aperture and gone back to Iphoto due to a major glitch in Aperture that actually cost me loss of some wedding photos (approximately 20)! Watch out for this, it is damaging.
I have 3 external hard drives, and of course when you mount disk images and cards you gain them in finder on the left hand panel. It seems the order of the mount is crucial to Aperture locating things and consequently if the mount order changes Aperture can no longer locate the files, and worse if you import to hard drive it doesn't import to anywhere!
The situation I have is that the other day I was importing wedding images and was up to the last card (fortunately we had 2 photographers so the loss isn't as detremental) and the power went off. Happens a lot where we are.
So upon power comeing back on the external hard drives remounting, I have figured out they mounted in a different order to what they were previously.
So upon going back to Aperture I went back to importing to the same external hard drive location. It had no warning of a problem and seemed to import without a problem. However once it had finished, on clicking on the thumbnails the images wouldn't load. I imported again and the same problem happened, however I didn't realise and had deleted the files. When I realised I tried to locate the files using spotlight. They are no where to be found!
Also because of the re-order of my hard drives aperture can't locate previously imported (referenced) files. I can find these ones on the hard drive, so I haven't lost them, but it will take unmounting and mounting several times in different orders to try and get them back because I do not remember which way they were mounted!
This is terrible! Aperture is a mess. This sort of thing shouldn't happen. Besides it's still too slow and it has slowed my production time substantially. The only thing it has over Iphoto is it doesn't degrade the JPEG each adjustment. However in Iphoto this is negligable, it can't be noticed, and I am not going to sacrifice time, lost photos for a minute level of extra quality.
Aperture get your act together. I wasted my money back when I purchased the full price 1.0 version.
Has anyone else experienced this problem?

Hardly high and not mighty.
But, to your points.
It sounds like you do have a UPS, not a surge protector, though it probably provides this in addition.
The fact that your external drives dropped during import is the same as removing a drive without unmountingf it, yes? Who knows what state the inode/allocation tables look like and no surprise that any clusters part updated were dropped. They'll rebuild from the cast complete mirror, but in-flight changes would not necessarily have been written to both sets of tables.
I cannot understand why (for you) Aperture appears to need the drives mounting in the same order. Disk Utility may show something, but I suspect you tried this.
However, and this I do challenge, the fact that you blamed Aperture and stated categorically it behaves a certain way when it does so only under some odd or errored hardware condition is not the thoughful optinion of an experienced Mac user. I wish you no offence but despite what you observed and your experience, I do wish to correct your sweeping statement.
The other comment I would challenge is that "I'm writing for people to watch out for and to trial ..." I would agree with that statement if that was any part of the context of the original post. No, your original post was far more negative and accusatory.
Your other new comments are clearly based on issues causing you angst. I have felt most of them, but at the end, it is software. Perfect? No, but I haven't had a crash since 1.5.1. Far from perfect? Yes, and many features missing that may be added in v2, v3, v.... . Best for my purposes despite its faults? Yes, by far. It is the fastest and most productive way for me to get to end-of-job.
Now my question for you since: what in your view is a superior alternative? Many on this forum are professional/serious amateur photographers who want some software company to succeed. Perhaps the reason we contribute to the Aperture forum is because we've found it the best horse to ride and therefore want to see it improve.
G.

Is there a major flaw with Iphoto in regards to organizing and backing up?

Is there a major flaw with Iphoto in regards to organizing and backing up? And how should I proceed??
Here is my story. I have moved roughly 15,000 photos from 7 computers (4 PCs and 3 Macs - basically everyone's computer in the family) onto one external hard drive. The photos were taken by many different digital cameras, are sparsely labeled, and have the most random names and folders. There are a LOT of duplicates. MY MISSION - label and back them up.
The way I normally deal with photos/DATA is this: I plug my camera into my Mac and immediately think about organizing and backing them up. With "Preview" I look at photos (and decide which one I like), create a folder called "where-ever I took these photos" and drag them into that folder. The problem with Iphoto is that you have no ability to control folders, unlike many other applications.
For example, in Itunes you can rename an artist, or even an album, and it will automatically appear in an updated folder. If you alter a photo in Photoshop, it makes you save it is a new file. In Iphoto you cannot make the same "root level" changes without making duplicates. From what I understand, you can place photos into an Album and then export that album (which makes duplicates). Iphoto will rename each duplicate file and then place it in the correct folder. The problem here is I have no idea where the original is to delete it.
Basically I want to create folders called "Trip to Italy 2003" or "Rachel's Wedding" and place all the photos associated with that event in those folders. The problem I run into is that I have a bunch of duplicates. I have heard of a program called Duplicate Annihilator which has gotten favorable reviews. If I import them into Iphoto all the photos are placed in random named folders. I say random because some of the photos were taken on cameras that didn't have the date set correctly. Hence some of my photos will appear in a labyrinth of folders called "Modified / 2001 / Roll 17 / DCM482 / Image25874654.jpg"
I am totally willing to wipe my Iphoto library clean and start again if there is a way to organize the photos as described above. Eventually I will take these folders and save them on a data DVD.
Thanks to anyone who can help.
Gary

You do not need to delve into the folders within the iPhoto Library via the finder to access any photo. That is all done within iPhoto itself. If you need a photo for use outside of iPhoto read Terence Devlin's treatise on file access. iPhoto is a DAM application - Digital Asset Management, not a folder manager. There's a big difference. You can use keywords, album and smart albums to organize your photos.
If you still have the original files you might consider what I do. I rename each file with the date it was taken using the international date format: YYYY-MM-DD-001.jpg. You can download the demo version ofMedia Expression and automatically rename each folder of photos with the EXIF date and a sequential number. This makes chronological searching and sorting much easier both in iPhoto and the Finder.
If you want to not only manage the photos but the folders then Expression Media will let you do both. It will let you rename files after being imported into a catalog, move them between folders, add ITPC metadata to the files, create virtual albums called Supplemental categories, and much, much more. I use it as my primary DAM and iPhoto for special projects like books, slideshows, calendars, etc.

I am experiencing some major problems with my MacBook Pro. I have had some issues with it turning on/off at random times, but today, when starting, I get the grey start-up screen and a recovery bar. After filling in approx 1/4 of the way, the machine dies

I am experiencing some major problems with my MacBook Pro. I have had some issues with it turning on/off at random times, but today, when starting, I get the grey start-up screen and a recovery bar. After filling in approx 1/4 of the way, the machine dies. After starting it in recovery mode, it will not allow me to download OS X Mavericks- it says the disk is locked. Any ideas? I do not have a back-up and do not want to erase everything before I have explored my options. Help?

try forcing internet recover, hold 3 keys - command, option, r - you should see a spinning globe
most people will tell you to do both pram and smc resets (google) and if you still have issues, either clean install (easy) or troubleshoot (hard)

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!
I have created a navigation system on the master pages and set the presentation to links only mode. I also have other links scattered throughout the program, like a linkable table of contents, etc. Some of them work, some of them don't. Not sure why. Anyone out there having similar issues? Or have any idea on how I can solve this issue? Any help would be appreciated!
Thanks!

Links should not create any problems in Keynote. If they are set up correctly on text, the text will be underlined. Objects that have links will have a curved arrow bottom right, if you click the arrow a popup will display the link information.
Try this repair for Keynote, ensure you complete all the tasks and in the order shown:
1
delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2
empty the trash: Finder > Empty Trash
3
Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
4
Let the Mac fully boot up, it will take longer as the OS is repairing the drive
5
when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
6
when complete, restart the Mac normally, Apple menu > Restart
7
install Keynote from the Mac App Store
let us know if this helped

10.9.3 = major problem with fast user switching

I've found a major problem with the 10.9.3 update with my 27" iMac, you probably won't see it if your on a laptop. I did all the updates in past few days i.e., 10.9.3 combo update, iTunes 11.2.1.
Afterward I noticed a bug when Fast User Switching i.e. FUS. I have 5 accounts but the bug can be replicated with only 2.
I login to userA have some windows open but you can just open a Finder window. Now make the window at least half the with of the screen and move it to the right side of the screen. Then login in to userB and setup the windows the same way as userA. Now FUS to userA and then back to userB. You will notice that the Finder window has been moved to the upper left corner of the screen. This problem happened's to all user accounts you login to except the first account you logged into.
Since I didn't know what update caused the problem I had to use Time Machine to revert to my last version of 10.9.2. I then double checked the for the bug and sure enough everything was working fine. I now was going to install one update at a time and to see which one was causing the bug. So I installed 10.9.3 first and found the bug immediately.
I now know what's happening. When the switch occurs the screen is resized to about the equivalent of a 13" MBP. At this point the windows that fall some ware outside that size get moved to the upper left corner and resized. Then the screen resizes to normal but it's too late, all the window have moved and been resized to fit the 13" screen size.
You can reproduce this effect by going to System Preferences and selecting Display and then select the Scaled radio button. No select the smallest size, say, 1280 x 720. Now select the Best for display radio button again. You will now see all the windows you have open that were too big no moved and resized to the upper left corner. I know why the Mac moves the windows, it's so you don't have any windows stuck off screen.
Now when I say 13" it could be some other size but it's about that size give or take.

Yes, it's when you user Fast User Switching.
Here's snapshot before the screen resized. Ignore the window in the lower right, I moved it from the upper left before taking the screen shot.
I hate to say it but I'm glad I'm not the only one with this bug.

Errors/Glitches with my brand new Equium A200 15I (incl video hardware)

Hi,
I just treated myself to a new laptop last Saturday and have thus only had it for about 3 and a half days so far but I noticed a few small things that I weren't sure were errors/faults or if they were just because its new, such as the fact that sometimes I type things with the keyboard and some of the letters don't appear on screen, which I think is probably more to do with me not typing or pressing heavily enough on the keys rather than anything else, its not happening so much now...the touch pad gets a bit sticky too and it thinks I want to scroll up and down when I want to move the cursor not scroll sometimes but I manage to get it to work, I think most laptops have glitches like this and presumably I could help fix it by calibrating the touch pad(?) I haven't had time to look into that yet though... there are a few other things though and most worryingly just this morning I got a video hardware error message, so now im a fair bit worried/suspicious that there may be a real fault with it and would like to know if this is the case, whether its something I can possibly fix (im no real expert especially with hardware but I can always try downloading and installing updates/fixes and that sort of thing if it'd fix problems).
The main thing which is worrying me most, is that this morning a message suddenly came up on screen, warning me that there had been a video hardware error, yesterday evening, which I clicked on a button I think to load more info. and I took this screen cap of it:-
http://img528.imageshack.us/img528/724/errorscreencapcw1.jpg
I thought it may help to show the actual full message rather than just trying and pasting the info., well ok to be honest I didn't notice it let you copy it to clipboard but oh well (oops lol).
I know there's a topic about a similar error but I didn't want to butt in on that discussion as I presume that should be for that persons error to be discussed, mine may be slightly different I don't know... I followed the instructions given in that discussion and checked the device manager and no hardware faults are showing up there, btw it says in the device manager, under display adapters, that its a Mobile Intel 945GM Express Chipset Family, im sure all the A200 15I laptops have the same card but I thought I'd just clarify that. Incase that wasn't the right thing to check I also checked under 'sound, video and game controllers' (as the error said it was a video hardware error) where it lists the only one as being 'Realtek High Definition Audio' and I checked the properties there, on both under properties it says that the device is working properly, with no signs of any faults...
The thing is, I had read online somewhere that there is some issue with the graphics or video cards. I'd read that they can be glitchy and sometimes break down after the one year. I'd also asked my dad about this and we checked that it was an Intel graphics card that came with this laptop, which it is, and we reckoned that Intel chips should be as reliable as any other brand really... so I didn't think that there should be a problem, though if there is I have until next September to get it fixed before the warranty expires!
What surprises or kind of worries me though, is that the error message was only presented to me this morning. It dates the error as having occured at 19:53pm... I was using it last night and infact I went to have a shower and I put the laptop screen down before I went to shower at around 7:35pm, I presumed that its ok to just close the lid and it would automatically go into hibernate mode or something similar(?) im wondering if that had something to do with it, as I 7:53pm would have been roughly when I came back and lifted the lid/screen up again to use the laptop again... I can only presume, given the time it quotes, thats what caused the fault?
It does give me the option to 'update driver software' and 'scan for hardware change' within the device manager, should I run both or either of those perhaps? is this a common glitch? should I be worried at all etc...
Any help is much appreciated, if more info. is needed then let me know and ill clarify what I can. Also in terms of whats installed, I have quite a few programs, for graphics I have an old version of Paint Shop Pro which I installed yesterday morning, it seemed to install fine, thats Paint Shop Pro 7 from Jasc, I also have some converter programs (for vid files, 3GP and stuff), AVG Virus scan, Spybot Search & Destory, DBPowerAmp, FTP Commander, Quicktime and Real Player, fairly basic stuff like that, nothing much else just my old pics and vid files I transferred from my old XP laptop to this one, in my documents... I don't have any high powered or complicated games or anything else like that installed. Also at the time the video hardware error message states, all that was running when I had the lid down (or before I put the lid down) would have been Windows Live Messenger (though im pretty sure I signed out before putting the lid down) and an IE window, im pretty sure thats all, I wasn't working on anything else just checking the 'net...
There are some other things I've noticed too that I thought perhaps I should mention(?), one thing I've noticed it doing is the screen going blank and then coming back very quickly, alot. I've already asked about this a day or so ago as by then I realised that it was only doing that before loading the 'Windows needs your permission to continue' window/message, which apparently its supposed to do and is something to do with the computer switching from displaying the normal desktop to the secure desktop, which I sort of understand lol.
So I believe that isn't anything to worry about but I have noticed over the lastday or so, that the screen seems to do this more, going blank then coming back again, even when that permission message doesn't show up.
For instance this morning when I first put it on and went to check my home page, I clicked on a link at the bottom of the page or wherever to load another page within the website and the screen went blank for a moment before coming back a second later with the requested page. Is this normal too? or a Vista related glitch, or is there a possibility there may be a glitch with the monitor? im guessing it may be more of a Vista thing but I thought I'd ask here just incase, I decided not to pay for any extra insurance/extended warranty as I'm very careful with my items and take good care of them and so I'm being careful to try and spot any faults early on while they may be fixable under the basic warranty and what-not...
Another thing I've noticed is that to start with, when I pressed and held the 'FN' button, a range of black and white icons appeared on screen which told me which F button(s) to use to make certain adjustments, it still does that when I try it now but at other times, it doesn't show the icons, no matter how long I hold the 'FN' button down. That doesn't really matter since I can tell from the symbols on the keys on the keyboard which buttons to press but its just inconsistent, is there a reason why sometimes the row of icons on screen will show up when I press and hold the 'FN' button and other times it won't show at all?
Also sometimes if I move the cursor right to the top of the screen, those icons load as they seem to always be located at the very top of the screen but sometimes this is a problem, if im trying to click on something else and one of those icons comes up instead... im sure you can switch this option off somehow but should I be worried that the icons don't always show when I press and hold the right button(?) just trying to be cautious!
I think this post is long enough and I can't think what else I could possibly add to help, so I'll leave this here. I don't mean to seem too paranoid but thought it best to mention this stuff incase anyone recognises these glitches/errors and can recommend a quick way to fix any problems before they may develop into anything worse... many thanks in advance for any help with any of these issues!!
(mods let me know if im wrong to include so many things in one topic, I kind of did this quickly and I apologise if im breaking any rules I don't mean to, if possible please break this into a few different topics or I can do this, though ill be at work frm 2-9pm today so might not be back and able to check here until Thursday morning (October 4th))

Hi Isla
Your message is really, very, very long. I think its too long to read it twice ;)
. Regarding all your issues on this notebook well. it looks like you have installed many 3rd party programs and applications. In such case its not easy to say if such issues are software or hardware related. But I presume its software.
I checked your screenshot pic but I have never seen such error message. But it looks like something wrong with the graphic card driver. The message says something about Live Kernel Event
A kernel's services are requested by other parts of the operating system like graphic card driver for example.
In such case I would recommend updating the graphic driver. According to you message its a Intel GPU. So you could check the Intel page for the compatible graphic chip driver.
Regarding the FN key issue;
The Toshiba FlashCard utility controls the FN key functionality. I have read in this forum that this application does not run smoothly and in some cases it causes some issues. The new update should solve the problems. You should check the Toshiba driver page. The FlashCard Utility is a part of the Toshiba Value added package.
So finally one more hint:
You should always check for the Vista updates on the Microsoft page. This OS is not perfected and Microsoft releases very often patches and fixes
Hope it could helps a little bit.
If necessary just ask for more info :)
Regards

I am having major problems with my trackpad on my macbook pro. I can no longer press down on the bottom left and right corners for it to click and follow my command. Please can anyone help?

I am having major problems with my track pad on my macbook pro. Even though my settings haven't changed...my trackpad is no longer responding as it did before. The left hand corner no longer clicks when I press it and my personal commands which I set up in preferences no longer seem to be workin. Please help!

Some websites have an internal mute or volume setting. If that's not the issue, see below.
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Close the window. Then select
           ▹ System Preferences… ▹ Flash Player ▹ Advanced ▹ Delete All...
In the sheet that opens, check the box marked
          Delete All Site Data and Settings
then click Delete Data. Close the preference pane.

Just bought a dell pc with windows 8. on my old pc (vista) i would right click a movie (in itunes format) and say open with itunes and it would play. Now it won't open in itunes and it just CRASHES. HELP PLEASE. is there a glitch with win 8???

okay not sure how this works so here i go again.
Okay i bought a dell pc with windows 8 (big mistake) i downloaded itunes and from my external hard drive, right clicked a movie file (in ipad format, because this worked in vista on my old laptop) and it will not go into itunes. And itunes keeps crashing. Is there a glitch with win 8 and itunes ? I never had this prob with vista. I would right click a file and say open with itunes and poof it goes in the library. Please help before i throw this thing out the window! OH newest itunes is what i have installed.

Take a look at this MBP, a refurbished unit. Don't let the late 2011 release date put you off. For about $500 less than an equivalent 'new' one with similar specifications you get a quad core CPU and excellent graphics. As Steve359 mentioned, this can be upgraded if the need arises and has the same warranty as a 'new' one
I would not be surprised that these may actually be 'new' MBPs due to the length of time that they have been replaced by the current generation. I purchased a 17" model about 5 weeks ago, and a serial number check suggests that it is 9 weeks old.
http://store.apple.com/us/product/G0NM5LL/A
Ciao.

Major glitches with Notes!

Similar Messages

Maybe you are looking for