Major gridlines - how to change how "major" they are

Hi.
I have a personal weight graph with time (days) on the X axis. There are 700 days on the X-axis scale. (I am pleased to see Numbers '09 can now handle graphs with lots of data points!) When I turn on Show Major Gridlines (Format / Chart / X-Axis / Show Major Gridlines), the entire chart background is black. This tells me it considers each of the 700 days to be "major" enough to merit its own gridline. How can I change it so that each, for example, month is major, so that the gridlines are useful? I've already set X-category labels to be every 30 days, but that makes no difference to how "major" the gridlines are.
Help!

What kind of chart are you using?
For lines ones, there is no 'major' gridline for X-axis.
We may just enable or disable Show gridlines.
Yvan KOENIG (from FRANCE jeudi 15 janvier 2009 15:00:11)

Similar Messages

When going through photos how can i see if they are in an album

when going through photos how can i see if they are in an album

~Not quite the same but you can find all the images that are not in an album (or vice versa) with a Smart Album.
File -> New Smart Album
Album -> is not -> Any

My start up disk is almost full and seems to have lots of files in other how can i tell what they are

I keep getting the message saying that my start up disk is nearly full and I have been deleting as many files as I can but now I find that actually it isn't my photos which I thought it might be, I have no music, videos or movies downloaded and just a small amount of document files. It seems that I have 91.56 GB of files in 'other' does anyone know what they might be and how I find out what they are?
Thanks

See here for answer about what is taking up space:
http://pondini.org/TM/30.html
and here:
http://pondini.org/OSX/DiskSpace.html
Seen in your "about this MAC" under storage as "OTHER

After restoring my iMac to factory settings it doesn't allow me to get iPhoto, iMovies and pages, which i had from the os x update. anyone knows how to recover them, as they are not on the purchased items? thanks

after restoring my iMac to factory settings it doesn't allow me to get iPhoto, iMovies and pages, which i had from the os x update. anyone knows how to recover them, as they are not on the purchased items? thanks

From your backup.

Why do computers change the list they are in?

I have created several list of computers in ARD 3.4. Several computer names change the list they are in in. Each mac has a unique share name. I cannot figure out why they would change list. Any one that has any suggestions please help. Thank you in advance.

Are they smart lists, or regular lists?
This sounds like buggy behavior to me, which is not unheard of in ARD. Perhaps try deleting your clients and re-adding, although I know that's a pain if you have more than a couple dozen Macs.

I have two airport extremes, one acting as amodem and the other operating in bridge mode. The extremes are connected using ethernet, but remain connected even when I disconnect the Cat5a cable. How do I know if they are operating wired or wirelessly

I have two airport extremes, one acting as a modem and the other operating in bridge mode. The extremes are connected using ethernet, but remain connected even when I disconnect the Cat5a cable (I did this to check that the 100 feet of Cat 5a cable connecting them was working). How do I find out if they are operating wired or wirelessly? I want to know as I assume I will get much better speeds if they are wired.

Hi Bob, many thanks for the prompt response. I think I did what you suggested, but you're the expert so I have sent over a few screenshots. The extreme in question is High Birches Home Office (the rest of the network has been in place and working well for some time). My new home office is going to be in the garden, circa 100 feet from the main house. I have installed armoured Cat5e cable down to the shed that is going to be adjacent to the home office once built and situated the High Birches Home Office Airport Extreme there temporarily. Everything works well, so I was surprised when I unplugged the ethernet, that it still worked. I also tested the ethernet cable by switching off my laptop's wifi and unplugging the cable from the airport extreme and directly into the laptop and that worked ok.
If the screenshots below (I did every Airport utility tab for the High Birches Home Office) don't tell you anything more, then the set-by-step instructions would greatly appreciated so I can ensure I completed the steps correctly.
Many
Thanks, Greg.

How to change how whole media looks?

Hi,
How can I change how media looks in my phone because it doesn't suite me?
Thanks,

Ok, how do you wish to change it?
You want a different wallpaper background or color? Or to rearrange the folders?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to notify users when they are timed out?

So I am a developer for fortune 500 company and the network infrastructure team came to me with an odd request for an application that taps into Anyconnect. I find it hard to believe that this functionality doesn't exist.
So here is the scenario. We have Anyconnect set up to not have an idle timeout. However we have it set up to disconnect after 12 hours.
Here is the problem. When the end user meets that 12 hours, it just disconnects on them. There are no warning messages, no messages they have been disconnected. Just the connection is terminated.
So my question is there any way to set this up to notify the user they have been disconnected and need to reconnect. Is there a way to notify them in advance that they will be disconnected in say 30 minutes?
They want me to create an application that periodically checks the connection time by executing
C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client>vpncli stats traffic
Getting the time connected then if they are nearing the timeout time then start presenting the user with a warning.
So that's basically my question. Is there no way to set this up in Anyconnect? If we are supposed to see these messages is it something our team might have disabled?
We are using Anyconnect 3.1.01065 on Windows XP and Windows 7

>> You don't have an idle timeout but will force disconnect after 12 hours? Does this really makes sense?
Actually yes, at least in our environment. Using Citrix applications and VT Terminal applicaitons they need a constant connection. If the user disconnected say via an Idle Timeout then their sessions into these applications can and will hang. Not only that the older VT terminal sessions if hung durring a process that locks records or tables then it is locked for everyone. They have to call our helpdesk and have them kill the user. Citrix gets a little wacky as well if the user just blinly disconnects. So idle timeouts are actually a bad thing. Also a user might through a terminal session or though a citrix connection start a long run transaction. For example a blueprint sent off to a render farm could take 3-4 hours to render some have even take 10 hours. So a user may start a process and then go away especially on the weekend.
So while there are issues with the internet in general that can cause disconnects most of this software will try reconnecitng from the server to the client everal times before finally giving up. So a quick break in internet connectivity is not an issue, a idle timeout where it doesn't reconnect until the user returns doesn't work.
Thanks for the link though, that will help

How to delete archivelogs once they are applied on Physical Standby

We have 10.2.0.4 Primary and Physical Standby.
According to Note, ID 331924.1, we have
on Primary:
RMAN> SHOW ARCHIVELOG DELETION POLICY;
RMAN configuration parameters are:
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY;
on Standby:
RMAN> SHOW ARCHIVELOG DELETION POLICY;
RMAN configuration parameters are:
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE;
I would like to delete the archivelogs from Primary(as soon as they are applied to standby) as well as from standby and schedule a RMAN script which will run every hourly. The archivelogs are taken on flashback area.
Please guide.

Handle: chakra
Status Level: Newbie
Registered: Oct 27, 2006
Total Posts: 107
Total Questions: 56 (46 unresolved)
Name Anirban
Why so many open questions. Close the answered questions, give points and keep forum clean.
Refer the below link
Best Way to monitor standby, primary databases, including alert logs, etc.
Edited by: jazz81 on 10-May-2012 16:38

I have two photo albums in my phone that I want to delete and I can't through the edit option or itunes, how can I delete them, they are taking up too much space on my phone?

Help, I have two albulms that I'm having trouble deleting through my phone and itunes.

Hi
If the Photoalbums were loaded from iTunes on a computer they can only be removed by Itunes and a computer.
If the albums were created on your iPhone then they are deleted on your iPhone,
Ih tyey are iTunes sourced albums you need to connect back up to iTunes/computer that you have been using. In the device Photo tab deselect all the checkboxes that are being asked to sync.
Select apply in the lower right corner.
Read this first
http://support.apple.com/kb/HT4236

I am planning to send some images to Alamy they need them as 24MB images how do I know when they are

Good morning I have submitted some images to Alamy and they like them, which is a great start, they need a Jpeg file size of over 24MB when uncompressed. Opening a JPG in an image program such as Adobe Photoshop will show you the uncompressed (open) file size, I have no idea how to proceed can you help please, many thanks
Kind regards
Sheila

Hi Sheila
A 24Mb JPG is a bit of a strange thing to ask for, but image size, vs resolution vs dpi vs size on disk vs size when open in Photoshop, is something that seems to cause more confusion than almost any other subject on this forum, and at my camera club, and I dare say, in the editorial office at Alamy - or at least at the desk of their new trainee who is doing work experience while waiting to go to uni.
I had not heard of Alamy, but they were easy to find, and as you'd expect, they have a page with guide lines on how to submit images
http://www.alamy.com/contributor/help/prepare-images.asp
Bottom line is to give them full resolution high quality JPGs (10 or more). They just say RGB, so play safe and make it sRGB.
BTW I had to laugh at the arbitrary way they list 'unsuitable' cameras.
http://www.alamy.com/contributor/help/unsuitable-camera-list.asp?cname=Canon
And nothing about iPhones!
BTW This answer has sat waiting in a Word document after the site went down just as I was in the process of posting it. Nice to see it back on line, but now I have to gou for the evening.

How to change how many cores to use in after effects cs4

so i raced my laptop vs my desktop
desktop:intel core 2 quad 2.33 ghz 4 gigs of ram
laptop: intel core 2 duo 1.83 ghz 4 gigs of ram
and my desktop beat it by a little bit
kinda sad
then i went to
edit>preferences>memory&multiprocessing
then i clicked on render multiple frames siultanesously [clicked on the check box]
and then relized that
my laptop said
actual cpu's that will be used: 2
my desktop says
actual cpu's that will be used: 1
that is why my desktop was running so slow1
can someone help me change that?

Hoonathan:
Even though in After Effects CS4 there's a new preference item to set how many cores to use (or how many to leave idle for other purposes), you have to bear in mind that this feature works by launching a number of background processes (ie, headless versions of the full application) according to the number of cores in your machine. Because of this, the more cores you have, the more RAM you need for the feature to work at all (or it will simply refuse to launch the background processes because of insufficient RAM). For a quad-core machine, 8 GB of RAM would be the minimum recommended amount (you could probably get all 4 processes to launch with 6 GB, but I don't think that would be a good idea). You should be able to have at least 2 cores used in your desktop system, though. Go to Preferences > Memory and Multiprocessing. Of course, enable "Render Multiple Frames Simulataneously" and make sure "CPUs to leave for other applications" is set to 0 (zero). Also, check that the minimum allocation (ie, minimum RAM amount per core for the processes to launch) is 0.5 GB.
If the number of cores is still 1, try moving the Longer RAM preview/Faster rendering slider and see if at some point, it enables the second core.
In the long run, upgrading your desktop system to 8 GB of RAM (or more, if the motherboard allows it) would be the best move.
Of course, for an in-depth description of all settings involved, take a look at the Memory & Multiprocessing preferences section in After Effects Help.

HT203167 i cannot find any trace in my itunes account of numerous audiobooks that i have bought in the last year. how can i recover these. they are in my purchase history but not in my collection.

i cannot find any trace in my collection of audiobooks that i have purchased over numerous months. they appear in my purchase history but are nowhere to be found in my itunes . how should i recover these ?

If you can't find the files in the iTunes folder on your hard drive, then you'll need to restore them from your backups. Audiobooks have not at this time been licensed for re-downloading from the iTunes Store.
Regards.

My gmail account on my ipad no longer has an option to designate how many days to sync and is telling me I have 30,000 unread messages. Anyone know how to change how many days it syncs?

anyone know how to fix the number of days a gmail will sync in iOS7 on the ipad?
I'm kind of thinking apple forgot to put that option on there. It's not in the same place as it is on my iphone.

so now I have to close an account I've held for 5 years and lose all my content...... am I right?
No.
I suggest you contact iTunes support.
-> http://www.apple.com/support/itunes/contact/
and was declined because I didn't have enough funds. This is fine. This happens all the time. Its cash.
I wouldn't say "this is fine" and it is not cash.
In many places, attempting to use a debit card with no funds (even if you don't know there are no funds) is fraud and is illegal.

TS1447 I always get an error that says 3 items could not be synced after an Itunes sync. How do I know what they are and what to do bat them

I geta message after attempting to sync with Itunes that says 3 items could not be synced. How do I know what these 3 items are? What should I do about this?

I updated to iOS 5.0.1 days ago and didn't receive that notification until just now...
This time I synced new photos I took yesterday, and it gave me the:
"iTunes Sync: 54 items could not be synced. See iTunes for more information"
Perhaps it kicks off when new items get synced.
I've decided to rent a movie yesterday. Once it gets deleted, I'm curious to see if it jumps to 55 items.

Major gridlines - how to change how "major" they are

Similar Messages

Maybe you are looking for