Major help needed for a fool :)

specs
ms 6728 ver 1
865pe neo 2
p4@3Ghz
512mb pc3200cl2 ddr dimm
ati radeon 9800
win xp pro
The Problem.
Thanks for reading this issue im not the most tech head person around so please forgive me if some of the following doesnt quite make sence as it should do in a technical way..
I have owned this PC for abut 1 year all was running fine until recently the machine would not boot windows would just hang until a complete power off. after some investigations the normal cleaning up inside case etc getting rid of dust the problem seemed to cure, until recently.
it was then i feel i did something rather silly i opened the manual that came with the machine and was reading thou the bios items all seemed the check out quite well with what the manual said but i did notice some items namely the clock speed for ram and burst speed seemed to high so i deciced to reset bios to default.... big error..
Now when i boot machine i get he following msg..
sata tx2 plus biis version 1.00 1030.26 promise tech 2001 2005
no device found
bios isnt installed
then the machine goes looking for a boot drive.
now the main issue being my machine has a sata hdd and it seems the machine cannot find any way of finding this?
so of course it then asks for a boot disk which i have one i created with winxp so install that it runs thou a few bits then sits with the A: cursor..
my issue is how do i get my pc to reconsise my hdd when it is sata as i cannot find anything in bios to help me with that maybe im just overlooking something...please help
plese note i do not have any of the orginal cds that came with the machine ie bios install etc as machine was purchased second hand
many thanks
shifter

Quote from: shifter on 02-August-06, 04:50:37
i found the item in bios named "intergrated prephirals" inside that found the option "ON CHIP CONFIGURATION"
i changed the "ATA configurtaion" from disabled to S-ATA only..
Go back into the bios and change it to S-ATA & P-ATA (Or Both)
That should get you IDE CDROM Drives back up and working.
Know you said when windows loads it Just Reboots itself......
Try tapping "F8" right after it gets past the Bios, and befor you see the WinXP logo.
Chose "Last Known Good config" If this dose not work then try "Safe Mode".
This should get you back into windows.
But let it be known if you are having problems with your "Windows Installation" than its best to Back UP as much data as you can. Then run a Clean Windows install.

Similar Messages

Help needed for writing query

help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2           02           Computer Science
3           03           Physics
4           04           Chemistry
5           05           Mathematics
7           07           Commerce
8           08           Computer Applications
9           09           Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383           S1      9           4           2           3
384           S2      4           2           5           3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383           S1
384           S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1               383          9
2               383          4
3               383          2
4               383          3
5               384          4
6               384          2
7               384          5
8               384          3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2      SUBJECT3      SUBJECT4
383     S1     Biology Chemistry      Computer Science Physics
384     S2     Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID     subjects
383           Biology,Chemistry,Computer Science,Physics
384           Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --Pradeesh

Well I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say.

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.

It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help...............

File missing (file\BCD error code 0Xc0000034 help need for work!

file missing (file\BCD error code 0Xc0000034 help need for work! what can i do?
have an p 2000 notebook pc

Hi bobkunkle, welcome to the HP Forums. I understand you cannot boot passed the error you are receiving.
What is the model or product number of your notebook? What version of Windows is installed?
Guide to finding your product number
Which Windows operating system am I running?
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Help need for force to signout All session ! how...

hi
help need for force to signout All session ! how ??
Solved!
Go to Solution.

Hi and welcome to the Skype Community,
To force a signout of all instances your Skype is signed into please change your password: https://support.skype.com/en/faq/FA95/how-do-i-change-my-password
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

RH9 Crashing When Generating WebHelp - MAJOR Help Needed

Hello,
Our software release date is next Thursday, August 18th, so I'm a bit panicky. What's happening has never happened before. Every time I try to generate WebHelp, RH9 crashes while "Updating Files". There are two of us working on the project...maybe something has gotten messed up? Can anyone tell me what I should check, or what I should do? Below is a screenshot of the error, as well as the error report itself.
In the above screenshot, you can see the Output View at the bottom of the window, and the crash happens during "Updating files..." Does anyone know what this means? I REALLY need help. If I can't get this figured out, we're in major trouble - possibly no Help released for our product. A trillion thanks in advance for anyone who can help.
Below is the contents of the error report
Message was edited by Peter Grainge - The text posted has been removed as it was over 100 pages long and made the thread very difficult for forum supporters to assist. I have deleted it and put the text into a text file that is attached.

Can we start with some questions to see what is going on here.
Has this project ever compiled correctly, either in RH9 or another version?
Is this a new installation of RH9?
Can you generate any RH project. Try generating one of the supplied dummy projects (e.g. SalesBuilder)?
Can you generate any other output formats from this project (e.g. CHM)?
Have you tried creating a new WebHelp SSL?
If none of this works, perhaps you can post some more details of what exactly has changed since the last successful generation.
The RoboColum(n)
@robocolumn
Colum McAndrew

KeyListener Help Needed for Tetris Game!

* Tetris - Java Enhacned
* By: Kunnel Zachariah, Johnathan Smith, Johnathan Adkins
import javax.swing.JFrame;
import java.awt.Color;
import java.awt.Graphics;
import javax.swing.Timer;
import java.awt.event.ActionListener;
import java.awt.event.ActionEvent;
import java.awt.event.KeyListener;
import java.awt.event.KeyEvent;
import static java.lang.Character.*;
import java.awt.*;
import java.awt.image.*;
import java.applet.*;
import java.lang.Math;
import java.lang.System;
import java.awt.event.*;
import javax.swing.*;
import java.util.Random;
import java.awt.event.KeyAdapter;
public class TetrisMain extends JFrame implements KeyListener
     int s;
     int p;
     int xPos;
     int yPos;
     int level = 1;
     int lines = 0;
     int score = 0;
     int switchPiece;
     private boolean[] keys;
     private int SLEEP = 50; //bigger # = slower animation
     private Timer timer;
     int bologna = 11;
    int posX[], posY[];
     Color color;
     boolean isSquare = false;
     public TetrisMain()
          setSize(550,710);
          setBackground(Color.black);
          setVisible(true);
          getContentPane();
     public static void main( String args[] )
          TetrisMain pongLab = new TetrisMain();
    public void paint (Graphics g)
          s=0;
          keys = new boolean[4];
          this.addKeyListener(this);
          g.setColor(Color.blue);
          g.fillRect(0,0,550,710);
          g.setColor(Color.black);
          g.fillRect(0,0,460,600);
          g.setColor(Color.blue);
          g.setColor (Color.black);
          g.setFont(new Font("Helvetica",Font.BOLD,14));
        g.drawString ("Level: " + level, 485, 40);
        g.drawString ("Lines: " + lines, 485, 80);
        g.drawString ("Score: " + score, 485, 120);
         ActionListener paintCaller = new ActionListener(){
               public void actionPerformed(ActionEvent event)
                    repaint(); //recalls paint every SLEEP milliseconds
          timer = new Timer(SLEEP, paintCaller);
          timer.start();
          while (bologna <= 30)
         if ( keys[0] == true )
               //move left paddle up and draw it on the window
               s+=3;
          if ( keys[1] == true )
          //move left paddle down and draw it on the window
               p+=3;
          if ( keys[2] == true )
               s-=3;
          if ( keys[3] == true )
               p-=3;
                    displayRandomPiece(g);
                    bologna++;
public void drawGridVertical(Graphics g)
         for(xPos = 0; xPos <=460; xPos+=23)
         for(yPos=0; yPos <=600; yPos+=23)
              g.drawLine(xPos,yPos,xPos,yPos);
    public void drawBlock(Graphics g)
     ImageIcon animatedIcon1 = new ImageIcon("untitled.gif");
     for(p =0; p <=530; p+=2)
      animatedIcon1.paintIcon(this,g,s,p);
      delay(100000);
    public void drawTpiece(Graphics g)
       ImageIcon animatedIcon = new ImageIcon("tpiece.gif");
      for(p =0; p <=530; p+=2)
      animatedIcon.paintIcon(this,g,s,p);
      delay(100000);
    public void drawZigZagpiece(Graphics g)
     ImageIcon animatedIcon2 = new ImageIcon("zigzagpiece.gif");
     for(p =0; p <=530; p+=2)
      animatedIcon2.paintIcon(this,g,s,p);
      delay(100000);
    public void Rectanglepiece(Graphics g)
         ImageIcon animatedIcon3 = new ImageIcon("rectangle.gif");
     for(p =0; p <=530; p+=2)
      animatedIcon3.paintIcon(this,g,s,p);
      delay(100000);
    public void Unknownpiece(Graphics g)
         ImageIcon animatedIcon4 = new ImageIcon("unknownpiece.gif");
     for(p =0; p <=530; p+=2)
      animatedIcon4.paintIcon(this,g,s,p);
      delay(100000);
    public void otherZigZagpiece(Graphics g)
         ImageIcon animatedIcon5 = new ImageIcon("otherzigzagpiece.gif");
      for(p =0; p <=530; p+=2)
      animatedIcon5.paintIcon(this,g,s,p);
      delay(100000);
     public void otherUnknownpiece(Graphics g)
         ImageIcon animatedIcon6 = new ImageIcon("otherunknownpiece.gif");
     for(p =0; p <=530; p+=2)
      animatedIcon6.paintIcon(this,g,s,p);
      delay(100000);
    public static void delay(double n)
          for (double x = 0; x <= n; x += .01);
      public boolean keyPressed(Event e, int key)
      if (key == Event.LEFT)
        s=-1;
      else if (key == Event.RIGHT)
        s+=1;
      else if (key == Event.UP)
        p-=1;
      else if (key == Event.DOWN)
      // fast=true;
      else if (key == Event.ESCAPE)
       // ingame=false;
    return true;
     public void keyPressed(KeyEvent e)
          System.out.println("keypressed");
          switch(toUpperCase(e.getKeyChar()))
               case 'W' : keys[0]=true;System.out.println("W keypressed"); break;
               case 'Z' : keys[1]=true; System.out.println("z keypressed");break;
               case 'I' : keys[2]=true; System.out.println("i keypressed");break;
               case 'M' : keys[3]=true; System.out.println("m keypressed");break;
     public void keyReleased(KeyEvent e)
          System.out.println("released");
          switch(toUpperCase(e.getKeyChar()))
               case 'W' : keys[0]=true; System.out.println("W realeased");break;
               case 'Z' : keys[1]=true; System.out.println("Z realeased");break;
               case 'I' : keys[2]=true; System.out.println("i realeased");break;
               case 'M' : keys[3]=true; System.out.println("m realeased");break;
     public void keyTyped(KeyEvent e)
          //no code needed here
public void displayRandomPiece(Graphics g)
     Random rand = new Random();
     int c = rand.nextInt((7)+1);
     switch(c)
          case 1:
          drawBlock(g);
          break;
          case 2:
          drawTpiece(g);
          break;
          case 3:
          drawZigZagpiece(g);
          break;
          case 4:
          Rectanglepiece(g);
          break;
          case 5:
          Unknownpiece(g);
          break;
          case 6:
          otherZigZagpiece(g);
          break;
          case 7:
          otherUnknownpiece(g);
          break;
}This is my code so far for Tetris. I am having issues with my keylisteners! I keep pressing the specified keys and the println statements wont show up or the piece wont move! i really need major help. can anyone give me some advice
Much Thanks,
Chris!

http://forum.java.sun.com/thread.jspa?threadID=5175447
Don't double post! No help for you!

Query help needed for querybuilder to use with lcm cli

Hi,
I had set up several queries to run with the lcm cli in order to back up personal folders, inboxes, etc. to lcmbiar files to use as backups. I have seen a few posts that are similar, but I have a specific question/concern.
I just recently had to reference one of these back ups only to find it was incomplete. Does the query used by the lcm cli also only pull the first 1000 rows? Is there a way to change this limit somwhere?
Also, since when importing this lcmbiar file for something 'generic' like 'all personal folders', pulls in WAY too much stuff, is there a better way to limit this? I am open to suggestions, but it would almost be better if I could create individual lcmbiar output files on a per user basis. This way, when/if I need to restore someone's personal folder contents, for example, I could find them by username and import just that lcmbiar file, as opposed to all 3000 of our users. I am not quite sure how to accomplish this...
Currently, with my limited windows scripting knowledge, I have set up a bat script to run each morning, that creates a 'runtime' properties file from a template, such that the lcmbiar file gets named uniquely for that day and its content. Then I call the lcm_cli using the proper command. The query within the properties file is currently very straightforward - select * from CI_INFOOBJECTS WHERE SI_ANCESTOR = 18.
To do what I want to do...
1) I'd first need a current list of usernames in a text file, that could be read (?) in and parsed to single out each user (remember we are talking about 3000) - not sure the best way to get this.
2) Then instead of just updating the the lcmbiar file name with a unique name as I do currently, I would also update the query (which would be different altogether): SELECT * from CI_INFOOBJECTS where SI_OWNER = '<username>' AND SI_ANCESTOR = 18.
In theory, that would grab everything owned by that user in their personal folder - right? and write it to its own lcmbiar file to a location I specify.
I just think chunking something like this is more effective and BO has no built in back up capability that already does this. We are on BO 4.0 SP7 right now, move to 4.1 SP4 over the summer.
Any thoughts on this would be much appreciated.
thanks,
Missy

Just wanted to pass along that SAP Support pointed me to KBA 1969259 which had some good example queries in it (they were helping me with a concern I had over the lcmbiar file output, not with query design). I was able to tweak one of the sample queries in this KBA to give me more of what I was after...
SELECT TOP 10000 static, relationships, SI_PARENT_FOLDER_CUID, SI_OWNER, SI_PATH FROM CI_INFOOBJECTS,CI_APPOBJECTS,CI_SYSTEMOBJECTS WHERE (DESCENDENTS ("si_name='Folder Hierarchy'","si_name='<username>'"))
This exports inboxes, personal folders, categories, and roles, which is more than I was after, but still necessary to back up.. so in a way, it is actually better because I have one lcmbiar file per user - contains all their 'personal' objects.
So between narrowing down my set of users to only those who actually have saved things to their personal folder and now having a query that actually returns what I expect it to return, along with the help below for a job to clean up these excessive amounts of promotion jobs I am now creating... I am all set!
Hopefully this can help someone else too!
Thanks,
missy

Help needed for using BASIC authentication through JDBCRealm

Help needed.
Hello,
I am doing a degree project, so far it works fine in my local machine, I need to try it on my virtual hosting (as it is a live server).
My project requires JDBCRealm, that is BASIC authentication loading access data from mysql database. Normally this setup can be done in Server.xml file, because my Tomcat hosting is a virtual one, I only have permission to access the web.xml file.
My question is: is it possible to get it done in an alternative way? In web.xml? Some properties file maybe?
Thank you very much.

You can set this up for your context using META-INF/context.xml instead of working with server.xml.
Make a directory called META-INF under your webapp ( it'll be at the same level as WEB-INF ). Under this, add a context.xml with all your context specific configuration including the realm. A sample is below
<?xml version="1.0" encoding="UTF-8"?>
<Context path="/myApp" reloadable="true">
    <Realm
        className="org.apache.catalina.realm.JDBCRealm"
        driverName="com.microsoft.jdbc.sqlserver.SQLServerDriver"
        connectionURL="jdbc:microsoft:sqlserver://127.0.0.1:1433;DatabaseName=myDB;SelectMethod=Cursor;"
        connectionName="username" connectionPassword="password"
        digest="MD5" userTable="users" userNameCol="userid" userCredCol="userpassword"
        userRoleTable="user_roles" roleNameCol="rolename"
    />
</Context>Hope this helps.
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
----------------------------------------------------------------

Help Needed for T42 Start-up Problem

Urgent help need!!!
I have a ThinkPad T42 with Windows XP installed. It works perfectly for a while without ever have any problem or error message. Then suddenly it won’t work anymore. The symptom is following:
After power on the laptop the Microsoft window would show up and it prompt me for window logon password. After I type in the password it then shows “window is loading your personal setting”. After a long while nothing would show up on the screen other than the background of the normal screen. There is no window bar at the bottom or any icon on the screen. If I start in safe mode then everything would show up. I don’t know what is going on.
This happened two months ago and I ended up restoring a backup image to get it work again. It happens again today with the same symptom. I am really tired of having to restore image backup every 2 months.
I would really appreciate it if any of your experts can offer me some insight into this problem. I am desperate in need of help.
Thanks very much!

wangy26, welcome to the forum,
Have a look at this thread to see if my post there helps. The problem seems to mostly occur at the start of a month, why I don't know. Unfortunately the member didin't report back whether or not this was a viable solution for them.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Help need for badi method me_process_po_cust~check

Dear All expert
Pl see following thread
I am stuck
Help needed
http://scn.sap.com/thread/3610303

See the issue here is HOLD feature in PO should not be there if it meets the error condition.
For this you can refer another BADI for this purpose ME_HOLD_PO.
Refer one of my previous threads below , it might be helpful :
Held Purchase order need not be created.
Reiterating a thread related to same topic is not a good practice.

XMLAGG structure, performance help needed for odd nesting in schema

Hello,
I have to produce XML to look like:
<?xml version='1.0'?>
<enterprise>
    <membership>
      <sourcedid>
        <id>PHYS_101_001_FA2007</id>
      </sourcedid>
    
    <member>
      <sourcedid>
        <id>D2LU0001</id>
      </sourcedid>
      <role roletype="Sample Role">
        <status>1</status>
      </role>
    </member>
    <member>
      <sourcedid>
        <id>D2LU0002</id>
      </sourcedid>
      <role roletype="Sample Role">
        <status>1</status>
      </role>
    </member>
</membership>
</enterprise>This would be straightforward if the schema allowed for a "<members>" tag under which to nest the <member> tags. But, it does not allow for that tag or any other than those listed above.
I have a query which does produce that output (except for the roletype attribute), but its performance is horrible; it takes about 40 minutes to return data:
SELECT
     XMLROOT(
         XMLELEMENT("enterprise",
           XMLAGG(
             XMLELEMENT("membership",
               XMLFOREST( XMLELEMENT("id",cx.mapped_course_id) as "sourcedid"
               (SELECT XMLAGG(
                 XMLELEMENT("member",
                   XMLFOREST(XMLELEMENT("id",spriden_id) AS "sourcedid",
                             XMLELEMENT("status",'1') AS "role"
                  FROM enrollments_fall_sfrstca efs
                     , spriden sp
                     , gzv_tuid t
                 WHERE sp.spriden_change_ind IS NULL
                   AND sp.spriden_pidm       = t.pidm
                   AND t.tuid                = efs.user_name
                   AND efs.mapped_course_id = cx.mapped_course_id
                   AND efs.term              = cx.semester
            , VERSION '1.0', STANDALONE NO VALUE)
FROM courses_xt cx
WHERE cx.semester = :term_code
;Similar queries are producing courses and users XML fine with no performance issues, but these are driven off either the courses view or the enrollments view, but not both.
Is there some other way I can produce the nesting I need for the vendor's schema?
The source views are basically as follows (showing relevant columns only):
courses_xt:
MAPPED_COURSE_ID       SEMEST
AVFT209-13307-201210   201210
AVFT210-13308-201210   201210enrollments_fall_sfrstca:
MAPPED_COURSE_ID       USER_NAME
AVFT209-13307-201210    FULLERC8
AVFT209-13307-201210    SHUPEK
AVFT209-13307-201210    NOMAN
AVFT210-13308-201210    SHUPEK
AVFT210-13308-201210    PELLONMWhen I have the query without the XML (with the subquery as a column of the outer query), this returns the correct data quickly (a couple of minutes).
I have tried various permutations of XMLFOREST, XMLELEMENT, XMLAGG but either I get syntax errors, or the data is wrong (e.g. repeated '<membership>' for each '<member>', or I have to create an invalid tag '<members>' to be filtered later).
Please advise!
Thanks,
Anita Lees

Hi Anita,
Have you tried with a GROUP BY and no subquery?
Here's an example using SCOTT schema.
I've used the same tag names and structure so that you can see the analogy :
SELECT XMLElement("enterprise",
         XMLAgg(
           XMLElement("membership",
             XMLElement("sourceid", xmlelement("id", d.deptno))
           , XMLAgg(
               XMLElement("member",
                 XMLElement("sourceid",
                   XMLElement("id", e.empno)
               , XMLElement("role",
                   XMLAttributes(e.job as "roletype")
                 , XMLElement("status", '1')
FROM scott.dept d
     LEFT OUTER JOIN scott.emp e ON e.deptno = d.deptno
WHERE d.deptno IN (10,20)
GROUP BY d.deptno
;which gives :
<enterprise>
<membership>
    <sourceid>
      <id>10</id>
    </sourceid>
    <member>
      <sourceid>
        <id>7782</id>
      </sourceid>
      <role roletype="MANAGER">
        <status>1</status>
      </role>
    </member>
    <member>
      <sourceid>
        <id>7934</id>
      </sourceid>
      <role roletype="CLERK">
        <status>1</status>
      </role>
    </member>
    <member>
      <sourceid>
        <id>7839</id>
      </sourceid>
      <role roletype="PRESIDENT">
        <status>1</status>
      </role>
    </member>
</membership>
<membership>
    <sourceid>
      <id>20</id>
    </sourceid>
    <member>
      <sourceid>
        <id>7369</id>
      </sourceid>
      <role roletype="CLERK">
        <status>1</status>
      </role>
    </member>
    <member>
      <sourceid>
        <id>7902</id>
      </sourceid>
      <role roletype="ANALYST">
        <status>1</status>
      </role>
    </member>
    <member>
      <sourceid>
        <id>7566</id>
      </sourceid>
      <role roletype="MANAGER">
        <status>1</status>
      </role>
    </member>
</membership>
</enterprise>

Help needed for grouping.

Hi,
    Help needed .
I have an internal table having 6 .
Ex :
f1     f2    f3     f4    f5    f6
a     aa    11    p1 10    10
a     aa    12    p1 20    20
b     aa    11    p2 30    30
b     aa    12    p2 40    30
Now i want to sum the fields f5 and f6 individually and need to display based upon the fields f1 and f4.
To Display :
f1     f2    f3     f4    f5    f6
a     aa    11    p1 30    30.
b     aa    11    p2 70    60.
can anyone help me.How to do this..?
Thanks

Here you go
DATA:
BEGIN OF cur_tab OCCURS 0,
    f1        TYPE c,
    f2(2)     TYPE c,
    f3(2)     TYPE c,
    f4(2)     TYPE c,
    f5(2)     TYPE c,
    f6(2)     TYPE n,
END OF cur_tab.
DATA:
BEGIN OF sum_tab OCCURS 0,
    f1        TYPE c,
    f4(2)     TYPE c,
    f5        TYPE p,
    f6        TYPE p,
END OF sum_tab.
DATA:
BEGIN OF final_tab OCCURS 0,
    f1        TYPE c,
    f2(2)     TYPE c,
    f3(2)     TYPE c,
    f4(2)     TYPE c,
    f5(5)     TYPE c,
    f6(5)     TYPE c,
END OF final_tab.
START-OF-SELECTION.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '10'.
cur_tab-f6 = '10'.
APPEND cur_tab.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '20'.
cur_tab-f6 = '20'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '30'.
cur_tab-f6 = '30'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '40'.
cur_tab-f6 = '30'.
APPEND cur_tab.
LOOP AT cur_tab.
    MOVE-CORRESPONDING cur_tab TO sum_tab.
    COLLECT sum_tab.
ENDLOOP.
LOOP AT sum_tab.
    READ TABLE cur_tab WITH KEY f1 = sum_tab-f1
                                f4 = sum_tab-f4.
    IF sy-subrc NE 0.
      WRITE:/ 'Something went very wrong'.
      CONTINUE.
    ENDIF.
    MOVE-CORRESPONDING cur_tab TO final_tab.
    MOVE-CORRESPONDING sum_tab TO final_tab.
    APPEND final_tab.
ENDLOOP.
LOOP AT final_tab.
    WRITE:/1 final_tab-f1,
          AT 5 final_tab-f2,
          AT 10 final_tab-f3,
          AT 15 final_tab-f4,
          AT 20 final_tab-f5,
          AT 25 final_tab-f6.
ENDLOOP.
and the output
a   aa   11   p1     30   30
b   aa   11   p2     70   60

W530 SSD and Memory help needed for high performance systems.

Hi Guys,
After dealing with lots of laptops that got destroyed by daily use, our organizations is considering ordering 25 Thinkpad W530 laptops from Lenovo and we hope that they last a little longer.
Our main usage is video editing and design so we have chosen the best that Lenovo has to offer as far as hardware.
Since Lenovo charges arm and a leg for SSD and 16GB memories, we have decided to purchase these separately and upgrade ourselves.
Knowing the high need for performance, what would you recommend for 128GB SSD and 16GB memory?
The laptops are all coming with 7200 RPM drives for storage so the SSD is mainly for programs and the OS.
For the drive bay, does this part sound right to you? http://shop.lenovo.com/us/itemdetails/0A65623/460/89555ADB1CE946DA80E0E5D6FE77B164
This would be used for the HDD and the SSD would be moved to main HDD location.
Is there anything else we should know about these laptops?
Thank you in advanced for your time and all suggestions are welcomed.
Cheers,
Chris
Solved!
Go to Solution.

I installed 32GB (4x8GB) of Corsair Vengeance RAM, and it has been working wonderfully since day 1.
Thinkpad W530, i7-3720QM, 1920x1080 screen, 32GB RAM, dual SSDs (Samsung 830, Crucial M4 mSATA), Quadro K2000M, 9-cell battery, DVD burner, backlit keyboard, Bluetooth, Intel 6300 wireless card

Help needed for THE decision

Hi everyone ☺
I’m finally planning to start recording what I play, and after some hours of wandering on the web I found some interesting possibilities. Now what I need is to decide which one is more suitable for my needs, and here comes the moment for apple discussions
Basically, I will record my own music one track/instrument at a time (I’m still not able to play more than one…and I dont’ want to spend 2.000$ to buy a 24-ins device just to record drum tracks), I’d like to have a software with built-in effects for guitar/bass/voice, integrated soundtrack possibilities (to play with video recordings), mixing options for both stereo and surround mixing, and I don’t want any card to be placed into my mac. Well, and obviously the sound quality must be pro-like…as anyone probably wants.
So, here’s what I came up with:
a) getting logic pro studio 8 and apogee duet
b) getting pro tools m-powered and mbox 2
c) getting one of the two softwares and a Monster iStudioLink Instrument cable and plug instruments directly into the mac
Now, the questions are:
if I can plug an instrument directly into my mac and control all parameters via one of the two softwares, what do tools like duet and mbox2 serve for?
In the case this tools are useful [ ☺ ], why ☺ … and which is the couple software/hardware that can best suit my needs?
I assume that every software has a proprietary file extension in which audio tracks are saved, so that it should be impossible to record an audio track with one software and edit it with another that has different functions/plugins (ex. from logic to pro tools, from pro tools to cakewalk sonar which I have on a pc etc.). Am I right, or is there any “standard”, non compressed high quality file type in which track can be saved and exported to be edited with different softwares?
I know that from this post it may easily seem that I’m a hopeless digital idiot, but I swear the situation is not really that bad so no need for the kind of explanations with drawings like the ones you find in the “for dummies” guides lol so every experts’ advice will be greatly appreciated
Neptune

Thank you Bee Jay and Pancenter for the lighting-fast and useful answers
now I am aware that an interface IS NEEDED lol (that means they are not produced without a reasons, are they?). I know Pro Tools is the industry standard but I don't like anyone/anything to tie me to their choices/interests (so that's why I was asking about Pro Tools, knowing that there's some sort of "hardware threat"). What I look for is just quality and if I understood what you both mean, as far as this aspect is concerned, Logic and Pro Tools are substantially comparable...isn't it? On the interfaces side, I already checked the Saffire ones (they seem quite good, and cross-platform use is definitely a plus), I will check the others mentioned and will let you know In fact, I didn't consider the "platform problem" but, as I wrote, I also own a PC with an Audigy 2 soundcard (midi/analog/optical/digital inputs/outputs and firewire port...not Madonna's private studio, but not as sad as Mac's little hole) and Sonar 6 Producer Edition, so that has been a really good point to ponder. And now, in the middle of this software/hardware battle...any personal suggestions based on tests/personal experience?

Major help needed for a fool :)

Similar Messages

Maybe you are looking for