Major installation problems

I am running into some serious headache installing the Java ES on a Solaris 10 / x86 platform. However I was having the same difficulties on a Sparc Platform and I am trying to install it in a non-global zone. I did try to install it in a global zone before and I seemed to have resulted in the same errors.
1) Following through the installation, when it is asked if I want to configure selected products now or later, I do it now, but I can NEVER get them configured. When it is asked to enter my IP address, it keeps saying that it is invalid. I thought perhaps it could be that it doesn't want a private IP, but even if I type in any kind of IP address whatsoever it gives me an invalid IP message and I cannot go further. I decided to try to see if I could just configure them manually aferwards, so I would skip this.
2) Through the installation (I am ultimately seeking to install the messaging system platform, calendar, to support Outlook. etc) it goes through and then fails. The error logs produce the same errors over and over again, it is looking for files which should be in the ISO image I downloaded but they aren't there. I'll copy and paste a few of the files here and hopefully someone has seen something similiar.
I mounted both ISO images but needed to copy the entire content to the disk because it was originally prompting me to insert the CD over and over and over so copying it let me pass that problem.
Here are lines the log file produced:
</export/java/cdrom/Solaris_x86/Product/shared_components/Packages/SUNWj5jmp/reloc/jdk/instances/jdk1.
5.0/man/ja/sman1/appletviewer.1> for reading: (2) No such file or directory
/usr/jdk/instances/jdk1.5.0/man/ja/sman1/apt.1
pkgadd: ERROR: unable to open
</export/java/cdrom/Solaris_x86/Product/shared_components/Packages/SUNWj5jmp/reloc/jdk/instances/jdk1.
5.0/man/ja/sman1/apt.1> for reading: (2) No such file or directory
/usr/jdk/instances/jdk1.5.0/man/ja/sman1/extcheck.1
pkgadd: ERROR: unable to open
</export/java/cdrom/Solaris_x86/Product/shared_components/Packages/SUNWj5jmp/reloc/jdk/instances/jdk1.
5.0/man/ja/sman1/extcheck.1> for reading: (2) No such file or directory
/usr/jdk/instances/jdk1.5.0/man/ja/sman1/idlj.1
pkgadd: ERROR: unable to open
</export/java/cdrom/Solaris_x86/Product/shared_components/Packages/SUNWj5jmp/reloc/jdk/instances/jdk1.
5.0/man/ja/sman1/idlj.1> for reading: (2) No such file or directory
/usr/jdk/instances/jdk1.5.0/man/ja/sman1/jar.1
pkgadd: ERROR: unable to open
</export/java/cdrom/Solaris_x86/Product/shared_components/Packages/SUNWj5jmp/reloc/jdk/instances/jdk1.
5.0/man/ja/sman1/jar.1> for reading: (2) No such file or directory
/usr/jdk/instances/jdk1.5.0/man/ja/sman1/jarsigner.1
pkgadd: ERROR: unable to open
</export/java/cdrom/Solaris_x86/Product/shared_components/Packages/SUNWj5jmp/reloc/jdk/instances/jdk1.
5.0/man/ja/sman1/jarsigner.1> for reading: (2) No such file or directory
/usr/jdk/instances/jdk1.5.0/man/ja/sman1/java.1
pkgadd: ERROR: unable to open
</export/java/cdrom/Solaris_x86/Product/shared_components/Packages/SUNWj5jmp/reloc/jdk/instances/jdk1.
5.0/man/ja/sman1/java.1> for reading: (2) No such file or directory
/usr/jdk/instances/jdk1.5.0/man/ja/sman1/javac.1
pkgadd: ERROR: unable to open
</export/java/cdrom/Solaris_x86/Product/shared_components/Packages/SUNWj5jmp/reloc/jdk/instances/jdk1.
5.0/man/ja/sman1/javac.1> for reading: (2) No such file or directory
/usr/jdk/instances/jdk1.5.0/man/ja/sman1/javadoc.1
pkgadd: ERROR: unable to open
</export/java/cdrom/Solaris_x86/Product/shared_components/Packages/SUNWj5jmp/reloc/jdk/instances/jdk1.
5.0/man/ja/sman1/javadoc.1> for reading: (2) No such file or directory
and just thousands more like this. I looked into sman1 and it's empty. other folders share the same characteristics, the installer is looking for files in a directory that has absolutely nothing :S
Any help would be really appreciated, I am trying to evaluate this system to implement our messaging platform but I can't even get it installed!
Thanks
Nick!

I managed to fix the problem. turns out the zone wasn't configured as a "whole root non global-zone" and it was giving all these issues. For the ip address issue I just issued a 'configure later" and I managed to configure each services individually.
thanks!
Nick

Similar Messages

Major installation problem: can someone please help?

I bought a hp officejet 4215 all-in-one. I had isues from day one. In the end, the paper would never feed through properly, I always had to feed it manually. So finally they send me a replacement printer and I can't install it. Well actaully it doesn't install the main component. I get the following error message: The hard disk became full while installing the file "hp aio print"
1008:23,-34 The disk is full. However, I've got 21 gigs of free space.
I've spent over an hour on the phone with support. We've uninstalled and reinstalled, we've trashed all kinds of files and folders from the library directory and it just will not install this file, without which, the scan and copy features will not work. They tell me it's an issue with my hard drive but if so, why did it work okay with the original printer? The problem with the original printer was that it wouldn't feed paper properly. The fax, scan and copy features worked just fine. They say I need to contact Apple and have something done with the Twain data source manager, whatever that is. Does anyone have any ideas or suggestions?
iMac G3 Mac OS X (10.3.9)

Okay guys, I figured it out myself. The installer was trying to install some components on my OS 9 partition when I got the disk full message. I freed up some HD space on the OS 9 partition and it installed just fine. Now why couldn't hp figure that out?

CS6-Major Installation Problems!

I installed CS6 on my new photoediting computer only yesterday. It has become a total nightmare!!! I had CS5, luckily, on it prior and left it installed upon installing CS6.
I have tons of memory and tons of HD space. Windows 7 i7 quad core
"Preferences>Memory Usage= Available=3255MB>PScs6 Use=1953mb(60%)
Of course Tech Support is only open M-F so I got nowhere except upon my own.
1) Have new Canon 5DMK3- Adobe preq's states that minimum for this camera in ACR is 7.0-not so!!! ACR Update manager sez I have all the latest updates for ACR!!
2) After realizing that I needed ACR7.1, upon downloading 7.1 I got constant errors saying I needed an updated Adobe Application Manager!
3) Now once I got all these fixed, I now cannot save any non edit tif,jpg,psd..without "checkerboarding" in the image!!! From ANY camera!!!
Any image saved as a jpg,tif,psd looks like this with varied placement of chekerboarding.
4) yet if opened in CS5 looks fine!!!!
5) What happened to the Bridge icon in the tool bar from CS5?
HELP!!
Dan

I have received the Escalation Team response and they say it is the NVIDIA card. The GT240 will not use the GPU processes in CS6 properly. They also state that it will happen using any other post processing software.
That is blantantly false because I tested it in CS5, CS5.5, LR4 and Canon's DPP and Image Browser and they work fine.
I am awaiting an new GTX670 card then we will go from there.
Now I also have a reply to the NVIDIA Case# and they say that it is an Adobe problem. This is only 1 of 3 answers below from NVIDIA.
Subject
Unable to work with Adobe CS 6 application
Discussion Thread
Response Via Email (Arun)
06/01/2012 06:32 PM
Hello Dan, I am sorry for the inconveniences being caused but since the issue persists with all the driver versions you have tried we suspect that the issue may not be related to the graphics card or its drivers as we are successfully able to install all the recommended drivers However also note that the issue occurs only when trying to save the image file and not while trying to work on the image file or render hence the issue does not seem to be related to the NVIDIA graphics card or its drivers While trying to check for possible causes I came across the following information that if the Scratch Disks are selected on the hard drive that is not able to provide enough space for the file to work on then such issues may occur. You may try the following steps 1. Open Adobe CS6
2. Press "Ctrl + K'
3. Select Scratch Disks and check the hard drive selected (C:\ or e:\, etc.,) Select a drive which has adequate free space, selecting C:\ may not provide enough resources for the application Please let us know if the above information was helpful and continue to post us for any further queries and we would be glad to assist you Warm Regards,
Arun S
NVIDIA Customer Care
Customer By Email (Dan Brodt)

Installation problem on Intel

I have tried to install Solaris 8 on my Dell machine.
I have tried to boot both directly via CD and by using Device Configuration Assistant on a floppy..
The first screen says this....
SunOS Secondary Boot version 3.00
WARNING: ACPI Tables not in Reclaim Memory
prom_panic: kmem_free block already free
Entering boot debugger:
[130ee5]:
and when i hit enter and choose c (continue execution), the m/c hangs and asks me to push ctrl-alt-del to reboot..
I don't know what the ACPI tables are .. and how i can fix this...
Anyone who knows this... please help..
Thanx a lot..

I have heard about the ACPI that may be a Power Managemnet Tools or something, it always be found in Microsoft Window 2000 Device Manager, sorry I can't help you to solve the problems.....because I also have some installation problem on my Intel paltform @_@.

Installation Problem on iTunes 6.0.1.3 - HpSdpAppCoreApp

Help!
I'm trying to install the new iTunes 6.0 and I'm getting a message during installation that says
HpSdpAppCoreApp
"The feature you are trying to use in on a network resource that is unavailable.
Click OK to try again, or enter an alternative pathway to a folder containing the installation package "HpSdpAppCoreApp.msi" in the box below."
The last time I dug through some files on my own, bad things happened.
Thanks,
C

good gracious, Chris ...
okay, try applying the general advice on installation problems given here:
http://docs.info.apple.com/article.html?artnum=93976
... and the InstallShield Tips and Pointers are also helpful with these less-well-documented errors:
http://consumer.installshield.com/faq.asp#ts
keep us posted.
love, b

Installation problem on SUSE 12.1

Hi
I'm a Linux beginner and I am trying to install LV on SUSE 12.1
I've also posted my problems on Lava:
http://lavag.org/topic/15240-labview-installation-problem-on-suse-121/
The installation started and it looks quite all right, but when I try to start LabVIEW, the application just sits in the taskbar for about 20 seconds and then just disappears.
Any ideas?
Is there a way to debug to see what's going on?
Cheers,
Mike
Solved!
Go to Solution.

Hi Mike,
Unfortunately, there are no versions of LabVIEW supported on SUSE 12.1 at present. Here's a link to LabVIEW version compatibility with different Linux distributions. I saw from your other forum that you're attempting to install LabVIEW 2009, which is certified for SUSE 11.0 at the latest.
Best,
Dan N
Applications Engineer
National Instruments

Installation Problem on Win8

Hello all
I need your help for troubleshooting an installation problem on a Win8 (x64) client. There is already JavaJRE installed, but we wanted to install some other versions, too. But it didn't work. So we tried to unistall to curently version. This was running badly. Now there entry is removed from windows software, but the software is still on the system. Always if we try to install any java, we get a failure message with no error discription. So we looked for some installation logs, but I can't find the problem. Can you have a look? What can I do?
Thank you guys for your support.
Installation Logs:
java_install.log - Pastebin.com
java_install_reg.log - Pastebin.com
JavaDeployReg.log - Pastebin.com

Hi people!
I have two problems with nokia suite...
first of all I can't install it at my windows 8.1, I receive the message attached...
Second,
in another notebook, all time I tried to update my N8 to Symbian bella I receive a blue screen of death, at windows 8
can somebody help me?
Attachments:
mokiasuit.png ‏13 KB

Installation problem on RHEL4 ..

Installation problem on RHEL4 (Red Hat Enterprise 4) i have
install start at unzip tar.gz and tar -xf .... now i have run
./installFMS it show
./fmsini: error while loading shared libraries: libstdc++.so.5:
cannot open shar
ed object file: No such file or directory
ERROR: Your are running the Macromedia Flash Media Server
installer
on the wrong platform.
it not support for fedora or anything else?
plz help....

would be nice if someone responded to this.... Macromedia
wouldn't have been this lax in giving a reply :) AND they keep up
with OS updates too :)

Xp_logininfo Installation problem

Hello gurus,
I'm facing the same problem as described in this link:
Re: xp_logininfo "Installation problem on windows 2003 with Sql 2005"
the error I get is similiar:
<i>The below message comes from executing the command master..xp_logininfo '<domain>\<user> ' Msg 15404, Level 16, State 11, Procedure xp_logininfo, Line 62 Could not obtain information about Windows NT group/user '<domain>\<user> ', error code 0x534. The statement has been terminated</i>
but I just don't get how to solve it.
-I've tried to use the profiler but didn't find any information that will help me to solve.
-One of the guys wrote to add "logon rights" to the user ... what does it mean ?
Please advice,
Dimitry Haritonov

Hi sven,
Thank you very much for the quick and direct answer.
The problem was that the user that runs the SQL SERVER service didn't have authorization to retrieve information from active directory.
I've changed the service user, run the sapinst again, and after it succeeded I've returned the previous user.
Best regards,
Dimitry Haritonov

Oracle database 11g release 2 installation problem on windows 7 (64-bit)

First of all my windows is not genuine, but on my friend's desktop oracle download and installation worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
(Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w, deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
and
then
I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)" from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
The values I filled for
1) Global Database Name : orcl
2) System Identifier : orcl
3) I chose common password for both SYS and SYSTEM
4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
6) Then after few more nitty-gritty clicks, we are set to go !
Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
Username : sys/ as sysdba
Password : (its the one you created in step 3 stated above )
After this you are ready to write your first SQL command.

Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
About Database Administrator Security and Privileges

Lightroom 3.2 Installation Problem on Windows 7 64-bit

Lightroom 3.2 Installation Problem on Windows 7 64-bit
I can't install Lightroom 3.2 (German) on my computer (Windows 7 Professional 64-bit).
While copying the extracted program files the following error message appears:
An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
I found out that other users had the same problem, and couldn't find a solution.
Perhaps it is a Microsoft .NET Framework related problem. But after installing .NET Framework 4 nothing changed.
Thanks for ideas to solve the problem.

Thanks for your advice, Mr. McLion.
I downloaded the 3.4.1 version and started the installation as administrator. Unfortunately the same error message occured again.
Then I tried to install the 32-bit version (although I prefer a 64-bit program on a 64-bit operating system). A similar error message appeared at the same point of installation progress, but with another combination of numbers and letters in brackets.

Installation problem for Java EE 5 SDK Update 2

Hi ,
I have jdk1.5.0_12 (J2SE) installed on my Windows XP. Now i am trying to install J2EE on my machine.I tried to install it twice but it comes to a halt after completing 45% at the same jar file. Following is the link which shows it comes to a halt.
http://img141.imageshack.us/my.php?image=j2eeinstallhangupav8.png
Also I wanted to know if I uninstall the J2SE and then install only J2EE will that be fine.Because I believe J2EE is a superset of J2SE ?
Thanks in advance.

For the difference between Java EE and Java SE read here:
http://java.sun.com/javaee/5/docs/firstcup/doc/p3.html
For the installation problem, I don�t know how to help you... maybe here you can find some ideas:
http://forum.java.sun.com/thread.jspa?threadID=738559
Andrea

PPStream installation problem on Windows 7

I just recently install bootcamp and use bootcamp to install windows 7 pro. Everything seems fine until i download PPStream and install it. The installation process was smooth just like usual. However, when it finishes installing, it asked me if i wanna open the PPStream. and i said yes. guess what, nothing happened, then the PPStream icon on desktop is not a normal app icon, it's like a unknown file icon with the reflash arrow on the bottom right corner.
I thought it might be the installation problem, then i went into Control Panel and uninstall the app, and reinstall PPStream, the same thing happened, and every time i click the PPStream icon on desktop, windows explorer stopped working. Anyone knows what's going on or got experience like this before? i will appreciate for any input. thanks

很简单。你子安装的过程中。看一下安装的目录。默认是安装在苹果的系统盘里的。而这个盘是只读的。所以管理器会崩溃。只要改到c盘的目录就可以了。
very easy, reinstall pps. when install pps directory change e : drive ---- to c: drive ... you area set to watch

Installation problem w/Vista

Boot Camp/Vista installation problem
MacBook 2GHz Intel Core 2 Duo, 2GB RAM, Snow Leopard 10.6.2.
Trying to install Windows Vista Home Premium using Boot Camp.
Started Boot Camp Installer and created 32GB partition. Inserted Vista disk as instructed and clicked on Start Installation.
Black screen appeared looking like this:
1.
2.
Select CD-ROM Boot Type: _
That last underline was flashing, waiting for input.
First off, I don't know what to type in, but . . .
The keyboard appears to be disabled because no keystroke registers, nor Return/Enter. Even pressing caps lock or num lock fails to register a light on those keys.
The only way out is to hold down the power key until shutdown, then restart with Eject key depressed to eject Vista disk.
Any suggestions would be appreciated.

Hi RebelGood,
have a look here http://forums.macrumors.com/showthread.php?t=467704 for instructions/solution.
Basically you have to make yourself a copy of your Vista disc using the files of that disc and a programm called oscdimg.exe plus a burning program.
And it had to be done on a Windows PC or in virtualized Windows (using Parallels/Fusion/VirtualBox) on your Mac.
Regards
Stefan

Installation problems on Solaris 9

I am having issues installing the base software and can't seen to figure
out how get past this. The error message from the installation log is as
follows:
Accept terms of Software License Agreement? [R] y
pwd: cannot determine current directory!
/tmp/installwnaWXF/checkinstallynaWXF: no home directory
Error during installation. Setup will now exit.
Please correct any errors described in /tmp/tta_inst.log, and then try
again.
Cleaning up temporary files...
# cat /tmp/tta_inst.log
**snip**
Processing package instance <tta> from </tmp/ttainst_1/ttapkg.15978/pkg>
Tarantella Secure Global Desktop Enterprise Edition for SPARC Solaris 2.8+
(SPARC) 4.10.903
Tarantella, Inc.
pkgadd: ERROR: request script did not complete successfully
Installation of <tta> failed.
No changes were made to the system.
Script detail for package <tta>
---> checkinstallynaWXF
Any help from here would be appreciated.
gavin

from the diagnostic details:
Architecture           spso0509
Host           SunOS e220r 5.9 Generic_117171-17 sun4u sparc SUNW,Ultra-60
Package           Tarantella Secure Global Desktop Enterprise Edition for
SPARC Solaris 2.8+ (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Andrew
Fonts (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Hangul
Fonts (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Platform
Identity Pack for SPARC Solaris 2.8+ (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Security
Pack for SPARC Solaris 2.8+ (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Windows
Connectivity Pack for SPARC Solaris 2.8+ (4.10.903)
Bill Weir wrote:
Gavin,
Glad you're sorted. Can you confirm that it is 4.10.903 you are using
(not 4.00.903)? I'm concerned if this installation problem is still
present in the later version.
Bill
Gavin Westermann wrote on 31/08/2005 05:00:
Bill - that seems to have done the trick! the installation is now running.
Thanks so much for this.I am running a pair of Sun Ray 170's on my desk
here at home mated to an E220R. I am hoping to use Tarantella to be able
to access and run apps on a win3k server in the same rack.
Gavin
Bill Weir wrote:
Gavin,
This looks like a known problem with TTA 4.00.903 and some Solaris
patches which were distributed at about the same time. However, you say
you're using 4.10.903, and as far as I know the problem should be fixed
in that version.
You could try the workaround described in
http://www.tarantella.com/documentation/sgd/ee/4.0/install.html - search
for "tta_pkgadd" on that page and follow the instructions given there.
Regards,
Bill Weir, Sun Microsystems Inc.
Gavin Westermann wrote on 30/08/2005 05:06:
I am having issues installing the base software and can't seen to figure
out how get past this. The error message from the installation log is as
follows:
Accept terms of Software License Agreement? [R] y
pwd: cannot determine current directory!
/tmp/installwnaWXF/checkinstallynaWXF: no home directory
Error during installation. Setup will now exit.
Please correct any errors described in /tmp/tta_inst.log, and then try
again.
Cleaning up temporary files...
# cat /tmp/tta_inst.log
**snip**
Processing package instance <tta> from </tmp>
Tarantella Secure Global Desktop Enterprise Edition for SPARC Solaris 2.8+
(SPARC) 4.10.903
Tarantella, Inc.
pkgadd: ERROR: request script did not complete successfully
Installation of <tta> failed.
No changes were made to the system.
Script detail for package <tta>
---> checkinstallynaWXF
Any help from here would be appreciated.
gavin

Major installation problems

Similar Messages

Maybe you are looking for