Major iPad 2 problem maybe dead......

First let me say I have all the latest updates on my iPad and Macbook 10.6.8 and iTunes 11 so I know that is not the problem.
Over the past few days my iPad 2 has been randomly shutting down when it was not being used. Sometimes it would do it in a few minutes other time it take a couple of hours before shutting down. When this happen I had to restart it by holding down the home button and the on switch at the same time.
Well it turned itself off again last night and I was unable to wake it up by holding down the home button and the on/off switch on the edge has I have done in the past. So I plugged it into my MacBook and iTunes recognized it and said it was in recovery mode. So I told iTunes to restore it. iTunes downloaded the software and after the download the top window in iTunes says "Waiting for iPad......." and has been like that for over 10 hours now. When I try to quit iTunes it says it can't because it is restoring the iPad.
So now I have what appears to be a dead iPad that I can't gracefully disconnect from iTunes and in addition I can't gracefully shutdown iTunes.
Any ideas what I can try next?
If the iPad died a hardware death is it worth getting it fixed or would it be cheaper to get a new one?

Hello:
If the iPad died a hardware death is it worth getting it fixed or would it be cheaper to get a new one?
I suggest you go to an Apple store for guidance. I believe they have some sort of program for a replacement at a reduced cost.
Barry

Similar Messages

Is my iPad 2 screen dead, or is it worse than that?

My iPad 2 has suddenly stopped responding. I had put it to sleep by closing the cover, and when I opened it, the screen was black. There have been no drops or other obvious mistreatment.
So I held down the power button, ostensibly to shut it down. No response. Held down the button again, ostensibly to start it up: no response. Tried that many times with same result. Charged the iPad overnight. Still no response (and no little chime sound that usually happens when I plug in to AC power).
iTunes can see the iPad, so maybe the screen is dead. But with the absence of all responses of any kind, I'm wondering whether it's worse than that.
I'm running iOS 7.0.4, so I suppose I could update to 7.0.6 and see if that helps, but since updates can be dodgy, I thought I'd save that as a last resort. (And yes, my AppleCare coverage is history.)
Any thoughts?

Ralph Landry1 Maryland Re: Is my iPad 2 screen dead, or is it worse than that? Apr 14, 2014 6:11 PM (in response to gyandev) Placing your iPad in recovery mode erases all content and settings, why you would do that in your case is a total mystery. You lose everything doing that.
There are alot of problems that could have caused you to have to do this. And no you do not loose everything is you have made regular backups.
Here are some reasons
1) itunes makes a new update for your device, there system is so overloaded with people downloading it that some people who downloaded it our missing packets of information this causes an incorect installation and leads to many pieces of hardware malfunctioning
2)usb conection will sometimes turn on and off during some updates, the program itunes dosent seem to check to make sure all the information went through to complete the installation
when either 1 or 2 occurs it is typically in my expereice that a traditional plug it into itunes and do a recovery will not work, you need to bypass several glitchs the IOS update has caused, which may appear to be hard ware glichs IE battery, screen or even after every attempt the update will just stop.
Their are several key components that make up electronic devices
Ram and catch, they require power or electricty to store data, you either need to drain or remove the battery (sometimes residual charge is left in electronic devices... or you may be able to by pass it or in some situations cause the device to ignore the miss writen data.
The battery may say bad on a basic diagnostic test that apple does, but in fact its perfectly fine.
another piece is the storage media, flash and rotaional drives do not need power to store information only to read/write. Individual sectors will go bad over time, and sometimes falsh data that wasn't caught before this point will be written here.
some batters actually have memory,, HDD and storage media and cpu's all have catch which may need to be wiped clean to make a device functioning the method for doing this is differnt for every piece of hardware and sometimes you do not need to take it apart to do it.
There is also ram, which again needs power to store data and will also make bad sectors over time..
if there your device is fully functioning but seems to be a bit slower/ not as good than when you first recieved it, you may need to consider a complete reset. You might notice when your done that the ram size is different that the storage drive has decreased, those are some of the bad sectors that the computer with its long use produced.
In most cases where there is some type of glich that cannot be solved simply by plugin it into Itunes, you might just need to do this. There are several methods posted, and i have tried them all, and most of the time when i needed them they do not work... I had to think, about this..
I needed to do a full recovery, itunes will crash half way through/ will not do the recovery, i need to provide power while placing the device in DFU mode(what i call a hard rest because its like hitting the master reset), because there is a problem/ glich when i try it pluged into a computer I need to use land power, than i need to conect it to itunes..
IT always works, the other methods do not account for the multitude of malfunctions an operating system can cause. This helps to ignore any catch problems, when you conect to itunes it will finish it without a hitch. than you can place all your apps, photos songs ect back in there.
I have had to do this for my own IOS device as well as several others. I typically do this even for random people or i tell them how to do this. Most of them come to me after being poorly disapointed with what the apple tech said.. for me its like if i took my car in for inspection and they said we had to replace the head piston, headmanifold ect, when whats wrong is just a loose wire...
This method should be done prior to doing any expensive fix's as some of the problems you have "fixed" where never really there..
when i was 8 my farther gave me a SCSi hdd that the technitions at his work couldnt fix/ get to work.. He though i would take it apart and see how it worked.. I read the manual, and power scematic, and i came up with my own fix.. plug a jumper into the - and the + jumper to clear the catch while power was going through.. it worked I had a working scsi.. that thing was bigger than an airport extreme curently on the market. I have always had the ability to trouble shoot sense i was alittle boy... I have fixed garmiin GPS as well i wish they still had the physical power switch and not the analog (it was so much easer to reboot them... I was an aircraft maintainer, i have fixed several other computer problems network issuse, hard ware and so on.. Although i have never taken classes in any of it i have learned on my own, and i understand how the device work rather than being told steps to fix it I can find solution where others cannot because i know how they work.. I think that is better than any colledge grad with no reall world experience in true problem solving.

MAJOR EXPORT PROBLEMS! PLEASE HELP!

Hello. I hope everyone had a nice holiday. I'll try to be brief. I'm having a horrible problem with exporting my films. I work on a PC. To me, that shouldn't matter, but here's what's been happening. I shoot my films at 23.976 frames on the 5DMII and the 7D. My film got into a film festival. They asked for a 720p mp4 file. OK, no problem. I went under H.264, I exported an HD File, with 23.976 frame rate and I checked both boxes for Max Render and I set a 2-pass. I exported and when I played the vid back through Windows Media Player, it felt fine.
BUT, at the festival this past weekend, I was horrified to discover that my film, and no other films, was having a major sound problem. The audio was about half a second ahead of the footage, so they kind of looked like they were speaking correctly, but their dialogue would finish right before their mouths would. Super embarrassing. All I noted when I saw the tech booth was that they were using a mac laptop hooked to the projector, so I assume maybe it was quicktime they were running? Also, I believe they put all of the vids together as one file so it would run together as one block, but still, I believe most of the other films were shot at 23.976 frames as well, so that shouldn't matter.
I went home, thinking maybe I just wasn't being diligent enough and I needed to really look at the sound. Maybe it was off. But I keep all of the temp tracks, the sound from the dslr, on track 1 and then just mute it. I unmuted and played both tracks, and there's no difference. No echo, no weird delays, they're both perfectly synched up.
I've been having this problem for a long time but this was the first time that I REALLY could see the problem, probably because it was on such a big screen. Just my opinion, but I've found that most festivals are running MAC software and it seems like the vids I export seem to have an audio problem being played through mac programs. Another instance, briefly. I did a screening for a feature I edited. I exported an HD mp4 and put it on a friends MAC. The sound was off when we pre-screened it. I have a PC Toshiba laptop, I ran the vid through windows media player, and it felt much better, so we screened using my laptop and it went fine. But what does that mean?
Has anyone else had this problem? It's not just festivals too. I have a subscription with Vimeo, but every short film that I put up there has some kind of an audio drift problem. It's always minor so some people see it and some people don't, but I'm certain the vids are fine on my timeline. Do I need to export using something else? A different setting? As a quicktime vid? That last question seems kooky since any tutorial I've seen is usually wanting h.264, so I just don't know.
Please let me know if there's anything I can try or if you just have an opinion. Thanks very much.

im sorry i cant seem to start a new topic PLEASE HEEEEEEEEEEEEEEEEEELLLLLLLLLLPPPPPPPPPPPPP
all of a sudden about half an hr ago my computer froze & went all spastic. i retsarted & now ALL MY SONGS ARE GONE FROM MY IPOD!!! I HAD 10 000+ SONGS HOW DO I GET THEM BACK!?!?!??
please tell me theres a way. when i check the ipod itself it says 0 songs 0 videos but strangely my 87 photos are still on there. also when i reconnect it to the computer it says to restore its factory settings but when i go to update/restoe it says i have 10GB left (its a 60Gb video ipod) so i think the songs are still stored there but i cant access them or something please help me!!

MAJOR FONT PROBLEM - GREEK FONTS - GREEK SYSTEM

Dear All
I own a G4 purchased from a local Apple Authorized reseller for greece Rainbow computers in order to be able to use Greek fonts. Recently upgraded to OSX Version 10.4.3
However I'm facing major font problems in applications such as Adobe Software i.e CS2
Greek fonts that actually work are very limited. For example in Illustrator only Myriad Pro and Lucida Grande function properly.
In Macromedia Freehand although a few more greek fonts work, they either disappear or become scrambled when I attempt to "Convert them to curves"!
This only applies to OSX Tiger. Panther seemed to be working fine for this, in Freehand.
I work as a graphic designer and it is very frustrating when I'm only limited to very few greek fonts even on a GREEK SYSTEM!!!
By the way: I tried all suggested methods on the forum such as: Greek keyboard layouts, verifying permissions, switching to System Greek Language, reinstalling Illustrator etc..
Is there anything else that i can do?
Pls help.. !

I own a G4 purchased from a local Apple Authorized
reseller for greece Rainbow computers in order to be
able to use Greek fonts.
Generally speaking, for problems with Rainbow's stuff you need to consult Rainbow. Apple itself does not produce a localized Greek system or the special add-ons that Rainbow provides to let you use non-Unicode Greek with older apps.
However I'm facing major font problems in
applications such as Adobe Software i.e CS2
Greek fonts that actually work are very limited. For
example in Illustrator only Myriad Pro and Lucida
Grande function properly.
For an app like this you probably need to use Unicode Greek fonts. Those that come with Tiger are Lucida Grande, Helvetica, and Times. If you have MS Office 2004, you can also use Arial and Times New Roman and maybe Verdana from that app. Plus modern Adobe fonts like Myriad or Minion Pro. I suspect that legacy non-Unicode fonts will not work.
In Macromedia Freehand although a few more greek
fonts work, they either disappear or become scrambled
when I attempt to "Convert them to curves"!
I think Freehand is non-Uncode and probably needs the older fonts.
For problems with Adobe and Macromedia apps, you might also want to ask in their forums:
http://www.adobe.com/support/forums/main.html
http://www.macromedia.com/support/forums/

Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

after a restart it works for a time, but always slow. I went to the Applestore this afternoon and the made a check and said it would be the logicboard and they would have to change it for CHF 600 and it would be ready in 10 - 15 days

Having problem with dead key in Leopard

Hello. I'm having problem with dead key in Leopard.
In Tiger it was working, but in Leopard dead key "'" doesn't work.
In Tiger I could use OPTION key as well to get Latvian special characters (both worked - OPTION Key and dead-key), but in LEOPARD OPTION key is the only possibility to get these characters.
How can I get dead key "'" working?
I'm using Latvian language with Latvian keyboard layout.
Here are images how it looked in Tiger:
1) Before dead key is pressed:
http://amerix.no-ip.org/tmp/1.tiff
2) After dead key is pressed:
http://amerix.no-ip.org/tmp/2.tiff

ok, i got answer
so - first problem was that ukelele didn't work in leopard (it wasn't possible to start new layout), but it was possible to edit Tom Gewecke posted layout.
There it is possible to change every thing (dead-key as well).
So I edited it and now i have layout where dead-key works -
http://amerix.no-ip.org/tmp/LatvianT.keylayout
Just do what Tom Gewecke said with this layout. It should work!

HT1212 my ipad asks for a passcode but I never entered a passcode. this happened after the ipad battery went dead and i recharged.how do i get around the passocde prompt?

My ipad battery went dead and after recharging and booting up the ipad, it is asking for a passcode. however, no one remembers ever entering a passcode in to this ipad, isnce it used by everyone in the house. how do i get around this passocde prompt?

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

What do i do when my ipad mini is dead and wont charge

You know when your ipad mini is dead you hold the power and it will tell you to put your charger in, even when i put my charger in it still doesnt work.
SOMEONE PLZ HELP I AM SO SCARED

If you have a different charger, try it. If not, then make an appointment at the Genius Bar of the nearest Apple Store or Authorized Apple service provider to have the hardware checked.

My iPad mini is dead and it will not charge.

My iPad mini is dead and it will not charge. I had it charge for 3 hours using the 10W usb power adapter but it wont charge. It does indicate that it is plugged in but it isn't charging. Please help me.

Hello KimMed165,
Thank you for using Apple Support Communities.
For more information, take a look at:
iPad: Charging the battery
http://support.apple.com/kb/ht4060
Have a nice day,
Mario

Using iMovie 7.1.4 on an iMac w/ Snow Leopard; HD video imported with a Firewire cable transfers fine, but audio arrives with major static; problem persists w/ different cameras

Using iMovie 7.1.4 on an iMac w/ Snow Leopard; HD video imported with a Firewire cable transfers fine, but audio arrives with major static; problem persists w/ different cameras & Firewire cables; source DV tape has no audfio static.

I forgot to write down my computer specs:
iMac 27 Mid 2011
2.7 GHz Intel Core i5
4 GB 1333 MHz DDR3
AMD Radeon HD 6770M 512 MB
OS X 10.9.2

Adobe Captivate 8 projects published to HTML 5 shows major loading problems and stops

Adobe Captivate 8 projects published to HTML 5 cause major loading problems in most browsers(IE 11, Chrome v. 35.0, Firefox v. 31). Loading… (screen)
The view stops after a while and only the Loading… (icon) can be seen on the page.
Is this a known problem with Captivate projects published to html5 and is there a way to fix it? What is wrong?
Test the html5 version of this project at: http://kurs.dokker.no/captivate/
and see for yourself what happends.

I changed the Preferences/Project/Start and End Preloader % to 25 and published the projects again. The course: http://kurs.dokker.no/captivate/elev/
stopped like before on one of the first slides, loading… screen like before in IE11.
In Chrome v. 37.0 the course worked badly, would not run, sound missing and buttons not working.
In Firefox 31.0 the course worked to a degree even if the program was advising to use another browser for this content.
In Opera 23.0 sound was missing and else working as bad as IE.
All this testes is done on a PC using Windows 8 connected på internet via ethernet, download speed: 66.57.
I would like to use the HTML5-format since it has a cleaner view than swf-files that appear to be jagged, but there is a lot missing before Adobe Captivates html5 publish is where it needs to be. Her are the complete html5 course and here are the swf based course for comparison.

Major system problems

When running spellcheck with appleworks, my system displayed the message:
the main spell dictionary is not installed
I had this problem before, and went through the steps that worked before (getting rid of Preferences and Recent Items in appleworks). Doing this did not clear the problem.
So, I decided to restart the system to see if that would help. After the restart, the system had the following problems:
1. the dock was reset
2. sticky keys were turned off
3. the username to retrieve mail has been reset.
4. safari hung, so I ran firefox, which got the following messages:
Well, this is embarrassing.
Firefox is having troubles recovering your windows and tabs. This is usually caused by a recently opened webpage.
You can try:
o Removing one or more tabs that you think may be causing the problem
o Starting a new browsing session
(starting a new session worked.)
5. netscape worked.
6. spellcheck within appleworks still doesn't work, but it does work within applications
7.. and most important my keychain seems to be gone, and TimeMachine can't find it. This is a real problem, since I had about 200 entries in my keychain all with unique passwords. I'll have to invoke the forgot my password on each of these sites, assuming I have someway to get my username.
I still can't set up mail to automatically retrieve my mail, but I can manually log onto the server. I know I can manually setup mail to copy the manual login.
BTW, safari is now working; it was a transient problem, maybe related to a problem at my homepage, nytimes.com
Any thoughts? Thanks.

You may have a couple unrelated issues going on.
If you recently updated Flash, make sure you've repaired permissions, maybe even twice. I had a similar experience recently with pages that relied on a lot of Flash content - Netscape may not be current enough to have these issues, but Safari, Camino, FF, and Flock all crashed until I repaired permissions twice.
As to AppleWorks...I still use it, but just be aware that support for it could vanish. I'd try to reinstall it first. I would seriously consider making new documents from your AppleWorks files in MS Office, Open Office, Google apps, or some other app of your choice. It's possible that at some point OS X stopped supporting AppleWorks altogether. This is just speculation, but since it hasn;t been updated for years now, it's worth being cautious.

Major system problems, hanging up at startup.

I'm developing some major sytem problems with my G4 Mac. It all seemed to start with a jumping cursor and then a dying mouse. I could not get the Mac to startup with several trys. It wouldn't even start up off of my external drive. I would get the first four icons in the upper right hand corner of the screen and the it would hang. I tried all of the usual fixes- permissions, disk utiliy, Disk Warrior, zapping pram. I finally started unplugging external items and getting back to original Mac- switching the firewire port in the back of my Lacie external drive helped for awhile, but now I'm getting the jumping cursor again and fearing I'll get a hangup again. Any ideas on how I can solve this problem? If not, can you point me somewhere for instructions on how to reinstall the system software? I have already installed a clean system on my external drive. Once I reinstall all of my apps there, and get it running properly, can I move all of that to my internal HD somehow? My original system disks for this computer is Jaguar 10.2 if that helps.
Thanks for your help,
Dick Skover

Dick,
Some observations and notes.
Have you tried using a different mouse, or changing
the port it is plugged into?
Yes, I tried and am using a inexpensive Logitech optical mouse. The one that came with the computer seemed to get very eratic and then not work at all. I did try plugging into different ports and that didn't make a difference.
How did you upgrade from Jaguar 10.2.x to
Panther 10.3.9?
I upgraded the simplest way, I guess. I had read about more complex ways to do it at the time Panther came out, but also heard you could do a simple upgrade. I don't remember the exact steps I used. Boy, this is way more complex than my original Mac in 1984.
What size is your Hard Drive, and how much space is
available? I should say I have quite a few applications.
My HD is 75 Gig with 17 Gig available.
Is your installed RAM original or added?
Yes, it came installed when I purchased it: 1.5 Gig
In one post you wrote "My original system disks
for this computer is Jaguar 10.2..."
I heard something back when Panther came out that the fact I started with 10.2, didn't allow me to do certain things like archive and backup.
But in another, you wrote "Yes, my original
Panther disk and then updated everything via
Internet."
Please clarify.
When I decided to install a clean system on my external HD I just used my Panther 10.3 disk- I didn't go all the way back to 10.2
"Yes, Disk Warrior found some problems, I don't
know exactly what they were."
Were the errors corrected? Have you rerun Disk
Warrior, to see if they are indeed repaired?
Actually I ran DW today again on the internal HD and it came up with a couple of problems that it said it repaired. Should I keep running it until it doesn't indicate any problems?
A couple other things you can check.
Open System Preferences > Accounts > Your Account >
Startup Items.
Is there any item in there that you are not familiar
with, or did not put there yourself?
Yes I did try that- I had a repair person come in to help me. He did point that out and we deleted items that didn't need to be there. What he suggested did help for a week, but the problem came back. I called him again, but he said the only thing left to do was re-install.
From the Utilities folder, start Activity
Monitor.
Select Active Processes.
Watch for whatever process is hogging %CPU.
Yes he ran activity monitor also- there didn't seem to be programs hogging the processor although we deleted those that look familiar.
I also have a question about the title screems that pop up on start up. In the past I used to have several things being checked as it went through the process, now I get welcome to Macintosh and that's it. I seem to remember indications that Macaroni was running, but no longer see any of that. I do have Macjanitor also and thought that one of those automatically runs at startup?
I will run pseudo daily, weekly and monthly tasks now. Is this something that Macjanitor does, or should I run the maintenance scripts periodicaly?
ali b

10.4.9 - Major audio problems with digital audio

I have a Digital XMPCR radio with Edirol MA-20D Digital speakers
I now have major audio problems, the audio is garbled and doesn't sound as strong. Kinda like a FM radio in a car that is loosing signal when you are traveling.
I use this XMPCR for a couple of hours a day and had no problems this morning prior to installing the update.
I have a XMPCR that was modified for Toslink/Digital connection. I connect the XMPCR to my Mac Pro 2.66 with toslink cables and connect my Edirol MA-20D digital speakers with toslink cables. I use Amoeba's "LineIn" for audio pass through.
I thought it might me the FTDIUSBSerialDriver so I reinstalled it, did not fix the problem.
I also have a real bad "buzzing" sound going on in the background. When I quit JXM (the application for changing channels on the XMPCR), the "buzzing" goes away but I have a rapid ticking sound coming out of the speakers until I quit LineIn.
Anyone else have any problems with their digital audio input/outputs?

I dont use the digital XMPCR radio, but I use Digital Performer to record audio and MIDI and I use exclusively the Built-In Audio input and Output and everything is working fine after the 10.4.9 Upgrade.

Major iPhone Problem

Hello,
I'm having a major iPhone problem!!!
My phone crashed yesterday and wont turn back on or charge since then. It will start up with the apple logo and then the screen goes dark, will only stay on for about 30 secs. It's an original not jailbroken or anything like that. iTunes won't recognize it at all, I tired resetting it, hard resetting it, a different cord, basically everything and NOTHING works!
Please help! Thank you!

try doing a hard restart - hold home + power until the phone shuts down... then connect it to your puter.
you may have too many things running in the background on the phone... i have heard fetch & push can drain your battery like you experienced... i don't use them, i get my mail when i open the application.

Major iPad 2 problem maybe dead......

Similar Messages

Maybe you are looking for