Major Issues with Thunderbolt Display in Yosemite

I have a MacBook Pro (Retina, 13-inch, Early 2013). I'm having issues with thunderbolt display connectivity despite recent Thunderbolt Firmware update. The sleep wake function is not working and display with shut off sporadically.
MacBookPro10,2   Processor Name: Intel Core i7   Processor Speed: 3 GHz   Number of Processors: 1   Total Number of Cores: 2   L2 Cache (per Core): 256 KB   L3 Cache: 4 MB   Memory: 8 GB

Same problem here. I was so excited to see a firmware update this morning for my mac pro, and sure enough as i sat here, the display went black again.

Similar Messages

  • OS X 10.7.2.2 issues with Thunderbolt Display

    Help! With Thunderbolt display, Mac-mini and OS X 10.7.2.2 I get a blank screen when mini reawakens from sleep. Moving the cursor around like a paint brush reveals a portion of the underlying log-in screen. Once I uncover my user icon and log-in, my desktop will appear and function normally!!!
    IS this caused by (1) the Thunderbolt display, (2) the latest Lion update or a combination of both ? I experienced no problems with older display and Lion 10.7 !!
    Any solutions/recommendations?

    Hello Drew,
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

  • New Mac Pro display issues with Thunderbolt display

    When connected to a 27inch Thunderbolt display after a while I get vertical blue lines on the display. If I plug my Macbook Air into the screen, after a while the blue lines clear. How do I find out if it's the Mac Pro or the Display?

    Thanks Turbostar, that's exactly right, it takes about 30 minutes having the Air plugged in and the stripes disappear.

  • I downloaded Yosemite last week, having major issues with typing

    dw yosimite last week and have had major issues with typing, cursor leaving page

    Hi KevinfromGeneva,
    Welcome to the Support Communities!  Are you working with a wireless keyboard or mouse, or are you having issues with a trackpad?  The article below offers general troubleshooting tips for issues with these input devices:
    Troubleshooting wireless mouse and keyboard issues - Apple Support
    Cheers,
    - Judy

  • I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!

    I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!
    I have created a navigation system on the master pages and set the presentation to links only mode. I also have other links scattered throughout the program, like a linkable table of contents, etc. Some of them work, some of them don't. Not sure why. Anyone out there having similar issues? Or have any idea on how I can solve this issue? Any help would be appreciated!
    Thanks!

    Links should not create any problems in Keynote.  If they are set up correctly on text, the text will be underlined. Objects that have links will have a curved arrow bottom right, if you click the arrow a popup will display the link information.
    Try this repair for Keynote,  ensure you complete all the tasks and in the order shown:
    1 
    delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
    2 
    empty the trash:  Finder > Empty Trash
    3 
    Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
    When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
    If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
    4  
    Let the Mac fully boot up, it will take longer as the OS is repairing the drive
    5 
    when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click  repair disc permissions
    6 
    when complete, restart the Mac normally, Apple menu > Restart
    7 
    install Keynote from the Mac App Store
    let us know if this helped

  • Hello there, i have a major issue with my iphone 3g, it ran out of battery yesterday and now it won't charge or turn on at all, can anyone help??

    hello there, i have a major issue with my iphone 3g, it ran out of battery yesterday and now it won't charge or turn on at all, can anyone help??

    Apple Does Not recommend that. Please Read.
    http://support.apple.com/kb/HT1490
    From that article
    "Portables with built-in batteries"
    Current Apple portable computer batteries are pre-calibrated and do not require the calibration procedure outlined in this article. These computers use batteries that should be replaced only by an Apple Authorized Service Provider.
    MacBook 
    MacBook (13-inch, Late 2009) and later
    MacBook Air
    MacBook Air (all models)
    MacBook Pro
    MacBook Pro with Retina display (all models)
    MacBook Pro (13-inch, Mid 2009) and later
    MacBook Pro (15-inch, Mid 2009) and later
    MacBook Pro (17-inch, Early 2009) and later
    Thanks.
    Allan Mac wrote:
    Apple recommend calibrating the battery when you buy a new Macbook and then every few months, or monthly if it used on mains all the time. This, as Apple says is to keep the battery operating at maximum efficiency. When the battery discharges and shuts the macbook down, it still has reserve power for a good number of hours. There is also a logic board battery to hold various settings.
    I rather think I will take Apples advice on using their equipment not yours, but I would be intrigued to discover what is it you know that Apple doesnt about its batteries?
    Allan

  • Major Issues with Radeon 5770 Upgrade - No 3rd Screen and Choppy Video

    I hope someone here can help.
    I have upgraded the video card in my 2008 Mac Pro Xeon 2.8 Ghz machine, and the installation was fine. However I have 3 major problems:
    1. I can only get 2 monitors to display
    2. Video is very choppy - not nearly as smooth as the previous graphics card.
    3. I can't move windows completely onto the 2nd monitor.
    1. I have DVI dual-link connected to my DELL monitor 27 inch, mini display port to VGA to an old monitor I use for a second monitor in my equipment rack (I se it to keep an eye on my virtual mixer) and a minidisplayport to HMDI to go to my television, to play back video of projects I am working on.
    I can't connect the 2 mini display ports without losing the DVI.
    2. The video is really choppy - moving windows around is not at al smooth and everything seems a bit laggy. Obsiouyl no such issue before the upgrade.
    3. I have the 2nd monitor on the equipment rack where I can see the levels of the various audio I have got going around. That's it's prime function, but I can't move the mixer window all the way over to the second monitor - the edge gets stuck on the main screen. No such issues before.
    Does anyone know anything that might help me out of this?

    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    http://support.apple.com/kb/HT3382
    Guide to Apple graphic display adapters needed
    https://support.apple.com/kb/HT3235
    Atlona (Dual Link) DVI to Mini DisplayPort Converter for Apple 27-inch LED and 27-inch iMac
    http://www.atlona.com/Atlona-Dual-Link-DVI-to-Mini-DisplayPort-Converter-USB-Pow ered.html
    Mac Pro (Early 2009), Mac Pro (Mid 2010), Mac Pro (Mid 2012): Issues with three displays and multiple DVI, HDMI connections
    It's not the USB data that is needed to run three displays. It's the extra POWER. If you read the Apple article, they say the only solution they endorse is their US$100 Dual-Link adapters. Check the table at the end of the article.
    Mac Pro (Early 2009), Mac Pro (Mid 2010): Supported display configurations
    Readers here have found that if you have two Brand-X Powered adapters, aka active adapters, it also works fine. These do not always require another USB. If designed recently, they can pick up a power pin in the Mini DisplayPort interface.
    AMD (makers of the 5770 and 5870) lists the qualified POWERED adapters that meet their most stringent requirements. Look down the page and you will find several qualified Active Mini DisplyPort to various others, such as HDMI. These adapters are available from other outlets, such as Amazon, sometimes for far less than the Apple adapters.
    http://support.amd.com/us/eyefinity/Pages/eyefinity-dongles.aspx
    The other desktop monitor will plug directly into the DVI port on the card and the 40 inch tv will still connect via HDMI over the second Mini Display port.
    That will work only if you use an active Mini DisplayPort to HDMI adapter.
    The only (someone) have found to work (2009)
    http://www.alibaba.com/product-gs/337561577/miniactive_display_port_tohdmi.html
    but you should confirm that they are really active before buying 500 of them.
    You can connect a DVI to HDMI adapter or cable to an active Mini DisplayPort to DVI adapter but that won't give you any audio over HDMI. You could connect the DVI displays to the Mini DisplayPorts with active adapters and use a DVI to HDMI cable or adapter from the DVI port to the TV.
    If you want audio via HDMI, you can use audio from the Mac Pro's optical output with this DVI to HDMI converter:
    http://www.apogeeinc.net/products/item.aspx?item=2745
    Active MDP to HDMI audio and video converter:
    http://ca.startech.com/AV/Displayport-Converters/Mini-DisplayPort-to-HDMI-Active -Video-and-Audio-Adapter-Converter-Mini-DP-to-HDMI-1920x1200~MDP2HDS
    Discussion: Using three ports.
    https://discussions.apple.com/thread/2734984

  • Tap to click not working properly in Mountain Lion. How do I get apple to fix this major issue with mountain lion?

    The tap to click does not work with mountain lion as it did before the mountain lion install. I purchased a brand new imac in August of 2011 and got a wireless keyboard and selected the wireless trackpad instead of a mouse.  The trackpad worked wonderful pre upgrade with tap to click. Now after the install of the newest beast, I have to actually press the trackpad rather than a slight tap. I have carpel tunnel and this is causing great stress upon my hand. How do I get apple to fix this major issue with mountain lion?

    Perhaps, I was not clear enough.
    I have an imac purchased in Aug. 2011 which came with Lion 10.6 (two uprades before mountain lion)
    Recently, I just purchased a macbook pro retina with Mountain Lion
    On my imac, my settings allowed me to "tap to click" everything EXCEPT the initial log in at the star up of my imac, again running Lion 10.6
    On my macbook pro retina which has Mountain Lion, I set up the "tap to click" option, but notice that a "hard" click was neccessary when trying to click things. I thought this was a macbook thing (my first one) so I went and upgraded my imac to Mountain LIon, BIG MISTAKE! Now both my imac AND my macbook only have limited "tap to click" options. Before mountain lion I could "tap" to highlight and select text, tap and drag, and many other thiings that Mountain Lion has disabled.
    I am truly surprised that no one has noticed this MAJOR issue.
    Is there a way to uninstall this update, similar to how on a PC you can go back to a restore point.
    On another note even the way PREVIEW has changed is less user friendly, there used to be icons on the bottom right corner of the screen, now I have to double tap and select the option I would like to switch between contacts and thumbnails. This is really annoying and is causing me time when reviewing files.
    Just in case anyone was wondering, I did go to system preferences -> trackpad -> select tap to click
    In fact almost all of the trackpad functions have been selected.

  • Having major issues with InDesign CS6

    Having major issues with InDesign CS6. Not only is it crashing, but it is corrupting the existing file.  Then when I relaunch, it is not allowing me to open the file again.
    In another instance, yesterday I opened an file created 3 months ago and it allowed me to make changes, however I could not save them to the existing file, or not even to a new name.
    I had to copy each layer on each page to create a new document.  NOT GOOD!!!

    SherwoodGirl wrote:
    Having major issues with InDesign CS6.
    Then post your qeustion on the Adobe forums is it's their software you're having problems with:
    http://www.adobeforums.com

  • Having major issues with InDesign CS6. will upgrade fix???

    Having major issues with InDesign CS6. Not only is it crashing, but it is corrupting the existing file.  Then when I relaunch, it is not allowing me to open the file again.
    In another instance, yesterday I opened an file created 3 months ago and it allowed me to make changes, however I could not save them to the existing file, or not even to a new name.
    I had to copy each layer on each page to create a new document.  NOT GOOD!!!  Just saw that ADOBE has an update for InDesign.  WILL THIS FIX THE PROBLEM??

    Yes, I would certainly get the latest update. That we often solve issues like these, for this is not normal. Some further tips would be quite InDesign, then to trash your InDesign preferences and then re-start InDesign (it will rebuild them again). Some further areas to look into would be:
    * Corrupt Font(s) (or corrupt font caches - see below)
    * Corrupt Image(s)
    * Power Failures (power surges)
    * Placing images via drag-and-drop from an Internet page
    * Working on an InDesign file over a network or on a remote server
    If all else fails, we as Markzware (I work for them) also offer a Service to fix corrupt InDesign documents. See:
    http://markzware.com/support/faq/recover-bad-file-service/
    Hopefully this helps you.
    David Dilling of
    Markzware

  • Having Major Issues with Flash Player

    Using IE 8,  64 bit, flash player 11.4.402.287
    Having major issue with flash player! can not play a lot of games on FB. Games tell me that i need to update my Flash Player, PC says I have the latest version installed already.Ok, thought i would uninstall/reinstall...no go. Will not uninstall, says I need to close IE...which none are open.  This issue has been going on for weeks now.  I have done everything the help said to do and still not working.  I need HELP!

    im using the recent adobe flash player
    windows XP, internet explorer, 10.045.2, 32bit
    im not sure how this works, but im sure all that is correct:)
    if you need additional infomation, just let me know

  • Major Issues with views in A3

    I am having some major issues with views in A3.
    If you look at my screenshot I am in the Browser;GRID view, however many of my images are out of view to the right (should be 26). There is no way to see them or select them. Also note that there is no SIZE control on the bottom right!
    If i view it in LIST mode, all my images show up. If I go to FULL SCREEN everything works like it is suppose to. It just happens in
    http://farm5.static.flickr.com/4007/4354751139647d87b323b.jpg
    Any ideas on how I can fix this?

    If I go into split view, I do not get any scroll bars so there is no way of viewing all my images.

  • Major Issues with Premiere Pro CC

    I am currently having some major issues with Premiere Pro CC running on my macbook pro(specs below).
    I am trying to export a 4 minute video using the vimeo 1080p export settings as I usually do, and it takes about 10 hours to export the video. On cs6, a similar project would take 5-10 minutes.
    Also, the video that was exported contained a lot of clips that came out choppy and low quality.
    I am currently on the phone with tech support, and they cannot seem to figure out what is wrong.
    I have seen a few post about CC having issues with amd cards, but nothing has been confirmed yet.
    Any help would be greatly appreciated since this job is past due due to these issues.
    2011 MacBook Pro
    i7 2.2
    16GB Ram
    256 SSD + 750GB HD
    AMD Radeon HD 6750M 1GB

    You neglected to specify exactly which release of PPro CC you are running. There have been 5 of them.
    If you're on CC7.2 or 7.2.1, then you may be hitting the same problem discussed in one of these threads:
    RGB Curves: http://forums.adobe.com/message/5929088?tstart=0#5929088
    http://forums.adobe.com/message/5934916?tstart=30#5934916
    http://forums.adobe.com/message/5935386?tstart=0#5935386
    The first thing to try is switching Renderer to Software Only.

  • Major Issues with iPod Touch - Please help!

    Hi, I am having major issues with my iPod, and nothing seems to be going right. It all started a few days after I got it for Christmas. I would wake up, and my iPod would be completely discharged even though it had a full battery and was turned off. I woke up one night and found that it came on all by myself. I sent it into iPod, and they sent it back saying nothing was wrong. Since I got it back today and within six hours, I have had four software crashes to the point where I have had to uninstall iTunes and restore factory settings four times. I am now on my fifth crash, but this time, the screen won't even come on. It keeps saying that it is in recovery mode. I simply went to turn it on! Does anyone have any suggestions? Personally, I think there is a short, and that I need a new a replacement. However, it doesn't seem like Apple is very supportive of the idea. I go through all of their steps over and over and over, and the same thing happens! What is going on? Please help.
    Marie

    sounds like, for the charging problem anyways, that you are just putting ipod into "Stand by" mode... press and hold the power key for about 10 seconds and an option to power off will actually come on.. if u just press it and let go, it just goes to stand by.. i have noticed stand by drains my battery
    also, it doesn't sound like a short to me... the charging i am pretty sure is bc you are only putting it into standby however, the rest sounds like software.. did u try and restore using itunes or did you just reset the factory defaults?? Plug it into itunes and click restore under the ipod menu...
    Message was edited by: Devin Stephens
    Message was edited by: Devin Stephens

  • I just had major issues with my Mac and had to get a new logic board. When I got the computer back and tried to reinstall Photoshop- it says error 6. What do I do?

    I just had major issues with my Mac and had to get a new logic board. When I got the computer back and tried to reinstall Photoshop- it says error 6. What do I do? It is impossible to get any phone number for adobe.

    Try these solutions: Error "Licensing has stopped working" | Mac OS

Maybe you are looking for