Major Logic Studio 9 Upgrade install issues

I tried to install Logic Studio 9 upgrade today and there are a lot of problems. For one, Compressor 3.5 did not install, leaving me with 3.0.5. Quartermaster also did not update, leaving me with 3.0.5 of that as well. Soundtrack is at version 3.0.1.
The Logic Studio 9 Installer just keeps Soundtrack and Compressor grayed out, so I can't do anything about that. I followed the instructions on the Knowledge Base article about the iLife 11 conflict, but that didn't make any difference.
I also cannot log into the updates page on Apple's web site here (http://www.apple.com/logicstudio/download/). I have tried my Logic Studio 8 serial number and the serial number from my Logic Studio 9 Upgrade, and it just keeps telling me that they are invalid numbers. I have tried them with and without the dashes. The LS9 Upgrade installer accepted my serial numbers no problem, and I sent the registration to Apple. I'm totally baffled as to why the web page is denying me access.
I have spent HOURS on just trying to get this software installed properly, and I have never seen such a mess. I wish I could just uninstall everything and start over but they don't even include an uninstaller. So at this point I have no clue how to get access to the support page since it's denying my serial numbers and it's not letting me update Compressor or Quartermaster (but everything else seems to have updated). It also keeps EX24 synth grayed out.
I know this is a mess of a post but I've been trying to get this going for hours and hours and am exhausted and frustrated. Thanks for any advice.

Ok, for some reason the Apple Support site is accepting my serial number okay, but it seems what's available as far as downloads is out of date compared to the software update tab.
It seems my biggest problem remaining is just that I have Qmaster 3.0.5 and Compressor 3.0.5 which did not get updated to 3.5 (and then upped to 3.5.3 each with the ProApp Update 2010-02).
I have never had Final Cut, any version, installed so it can't be that, and the iLife 11 "forget pkg" solution from the Knowledge Base didn't work. So what gives? How can I get Compressor and Quartermaster installed?

Similar Messages

  • Logic Studio (upgraded from express 7.2) on a laptop and tower??

    Hi. I had Logic Express 7.2 and bought and installed the upgrade to Logic Studio on my MacPro Tower.
    I am buying a MacBook Pro and would like to install Logic Studio on that, as well. I understand that the license for Logic Studio allows one tower and one laptop. Does that still apply in my case for the upgrade to Logic Studio? i.e., will I have to first install logic express 7.2 on the laptop then "upgrade" to Studio, or can i just install Studio on the macbook pro and run it on both machines? Hope that all made sense!!
    Thanks,
    Rob

    You don't have to install Logic Express on your MacbookPro. Simply install Logic Studio. After you type your Logic Studio upgrade serial number, Logic will ask you for your original Logic Express serial number

  • Versuche Logic Studio Upgrade zu installieren, finde die Seriennummer der Version 8.0.2 nicht. Wo ist diese zu finden?

    Versuche Logic Studio Upgrade zu installieren, finde die Seriennummer der Version 8.0.2 nicht. Wo ist diese zu finden?

    Google translate says:
    Trying to install Logic Studio upgrade, can not find the serial number of version 8.0.2. Where to find it?

  • Please help~~ about secondhand logic studio upgrade from express

    i bought a logic studio 8 from ebay, its upgrade from logic express 7. the seller send me full package of logic studio 8 upgrade and one license label of the logic express 7 which stick on the license sheet of the logic studio 8. i did not get the full package of the logic express 7 but only get one license label of logic express 7. can i use this package of logic studio upgrade in my studio ?
    the seller sell all the s/n for me include the license of express 7, but i only get the license label of express 7, is it enough to own the license of this logic studio ?

    I'm afraid you may have to take this up with the seller, as it seems he didn't deliver what was listed for the bid. Because we are now on Logic 9, I'm unsure as to the effectiveness of updating past iterations of Logic. If all else fails, contact Ebay and/or Apple support.

  • Final Cut Studio & Logic Studio upgrade issue

    I am mainly audio based but have been working on projects more recently with Final Cut Studio 2 to deal with the video. As I use both Logic Studio 8 and Soundtrack Pro 2 a lot, and Final Cut Pro less, I plumped for the upgrade to Logic Studio which also contains STP 3 and Compressor 3.5 which seemed the right thing to do.
    However the install info and dvd doesn't want you to install STP 3 or Compressor 3.5 if you have Final Cut Studio 2 as they "contain updated components that are incompatible with Final Cut Studio 2 or earlier. If the Logic Studio installer detects Final Cut Studio 2 or earlier on your system, it automatically deselects the checkboxes for Soundtrack Pro and Compressor in the Custom Install pane."
    Personally I didn't want to run to the expense of upgrading Final Cut as I don't use Motion, Colour or Cinema Tools and although I am working heavily in DVD Studio Pro they haven't done anything to upgrade that application (boo!)
    So what's the deal? Am I unable to upgrade ST Pro to version 3 and also unable to benefit from the upgraded Compressor even though I've actually paid for an upgrade that promised me these options, and no mention until I'd opened the package that there would be any incompatibility issues with Final Cut Studio 2!
    Anyone know what these 'incompatible components' are?
    Sounds like sharp practice and bad product integration to me...

    I just spoke with someone in Apple Reseller Channel Sales and he told me that what is shipping now is strictly the Universal version. So, if you order a Final Cut Studio Upgrade from FCP HD ($699 retail, IIRC), you will receive the FCS Universal version in the big box with all the docs.

  • Need to make space in my Hard drive to install Logic Studio Upgrade

    ok. Here's my problem:
    I have a 1st generation Mac Book Pro. That means 100Gb of storage.
    I've been using it for professional audio recording since then with Logic Pro (6 or 7 I think) and I made necessary upgrades when they were available in both Mac book and Logic. So, now my Mac has 2.16 GHz processor, 2GB memory RAM and is running Mac OS X 10.6.3
    When it comes to Logic, I am in Logic 8, trying to make the last upgrade of Logic Studio but looks like there's no more space available on my laptop. At this point, I moved any other data that I don't need. My Hard drive is almost full of a data that most of it supposedly needs to be replaced or skipped. I'm talking about additional content of audio coming on Jam Pack, etc... The installation program allow me to put some of the data in other hard drives (about 22.68 GB) but still is not enough.
    Is there any way to solve this? May be uninstalling programs and data that later will be installed again with my upgrade? I don't want to make a mess before asking.
    Probably is time to get a new computer. If this is the only option please somebody tell me! but if is not, I refuse to spend the money. My laptop is working fine...
    Thank you
    Fran

    Well, first i would decide what you need the computer for. If you use iPhoto and iTunes, maybe moving the libraries to external HD may free up a significant amount of HD space.
    Also, look for apps you don't need anymore, look for ancient data that can be zipped&archived away. That's a lot of work, but is worth the time, because you get to know what really is on your HD. I have so many small apps&tools lying around on my HD clogging space, but in fact i only used them once or twice in a lifetime, so better delete them.
    BTW: Make sure you have enough space on your HD not only to install Logic studio but have some extra GB's for the OS to shuffle data around. No OS likes a full HD.
    My strong suggestion would to give your Macbook to a trustworthy Mac store where they install a bigger HD and copy everything over to the new one.
    Fox

  • Logic Studio Re-Install

    Will reinstalling Logic Studio on the same computer cause the computer/software to think that I have Logic on an extra computer? As I understand it, you can install Logic on only 2 computers. However, I want to re-install on one of those computers since not everything migrated corrected when I used Migration Assistant. Is it possible to complete a re-install and have the computer (or software) not think that I'm installing it on a 3rd computer?

    Logic looks on any networks, for a copy of Logic, and looks to see if there is an ID in "HD/Library/Application Support/Pro Apps" - if it doesn't see any other computers connected or find ID, you're good to go

  • Logic Studio not installing properly

    I'm on my 3rd time trying to install Logic Studio. It stops at the 3rd audio content disc and asks for "Please insert the "Logic Studio" disc to continue installation." Nothing I do at this point helps. My iMac G5 has Logic 7 Academic on it so I'm installing a full retail version Logic Studio. I also have iLife 5 installed. I've removed the pref list from 7, and dragged the Logic Studio icon back out of my applications folder before trying to reinstall each time. I am installing everything on my internal volume except the Jam Packs which I requested to be placed on an ext HD. Can anyone offer further advice?

    I had the same problem: one of the audio content DVDs was defective and would stall the installation.
    I installed the programs and the apple loops and called Apple Support. They sent a replacement DVD and I received it shortly after so I could install the audio content.

  • Final Cut Pro Studio 5 Install issues....

    Hey Fellow iPeps., My name is Jonathan and I have a rathe complex issue infront of me. First, let me state that I am by no means a Mac sorta guy. I am in the transition stage where some things in that mac world just make no sense to me. Okay, I am trying to install Final Cut Pro 5 onto my new iMac 27inch unit and keep getting an error msg that reads, Your computer does not have the right hardware.... you know, I have tried installing it on my macbook pro as well... It should be noted that at some point it was installed on my G5. I did not install it so I dont actually know what the difference was. Someone help! Pretty Please

    Final Cut Pro 5 is NOT compatible with Intel processor Macs. You need version 5.1 or higher. The current version is FCP 7, which is only available as part of Final Cut Studio 2009 (aka FCS 3).
    If you own a legitimate retail version of FCP 5, you can upgrade to FCS 2009 for $299.00 (USD). http://store.apple.com/us/product/MB643Z/A?fnode=MTY1NDAzOA&mco=MTA4MjgwODU
    -DH
    Message was edited by: David Harbsmeier

  • Office 2008 upgrade install issues

    Just installed the upgrade of Office 2008. I could not get the programs to work even though it loaded successfully. I finally called MS and they had me create a new identity on my mac and install the upgrade there. It works. My issue is how to merge the identities or merge the data from the old identity to the new identity? This is for iTunes, iPhoto, Entourage...everything.

    *"My issue is how to merge the identities or merge the data from the old identity to the new identity?"*
    This isn't an issue with Office and/or Windows compatibility but rather a question better suited for the OS X discussions since you'll be wanting migrate a user account.
    Your best bet would be to post your question in the Account and Login section of the OS X forums:
    http://discussions.apple.com/forum.jspa?forumID=1220

  • SYSTEM REQUIREMENTS FOR LOGIC STUDIO-upgrade from LOGIC PRO 7

    I have been using LOGIC PRO 7 on my G5 1.8ghz Power PC G5 with 768 MB DDR SDRAM with no problems. I'd LOVE to upgrade to the new 8. I notice it said minimum req is 1.25ghz and 1gig of ram.
    Will I be able to run this on my current system for basic recording, etc. Do I REALLY need the 1.25 and 1 gig of ram? If i'm doing no more than 8 tracks live at a time-live instruments?

    Hi Mikey, First off they mean a G4 1.25 or faster. Your G5 1.8 should be fine. Second, the 768MB of RAM will be an issue. Fortunately RAM for your machine isn't that expensive. If I were you I'd load up with as much as you can. It will help you in all aspects of your computing, not just Logic. Check out the link below for some options.
    http://eshop.macsales.com/MyOWC/Upgrades.cfm?model=183&type=Memory&TI=0552&shoup grds=Show+Upgrades
    Stootka
    P.S. I am in no way affiliated with the retailer in the link, it's just the first place I thought of. You may want to search on a few more to shop for the best deal.

  • Final Cut Studio 2 install issue

    OK, so I'm only just upgrading to FCS 2. I currently use Final Cut Studio (5.1) and bought the upgrade version of FCS 2. It is rejecting my serial number as invalid. How can this be? It's not recognizing my current version of FCS on my drive either. Anyone have this problem?
    I bought this unused, shrinkwrapped version from someone on ebay.

    It's very easy to shrink wrap, Can you contact the seller.
    DM
    Message was edited by: David Mclaine

  • Installing Logic Pro 9 upgrade on a different Mac than the one that Logic Studio 8 is installed on.

    I have Logic Studio 8 installed on an OLD Mac Mini (10.6.8).  It's not really worth the hassle to upgrade hardware (and the hardware that can be upgraded in that Mac Mini is limited).  Am I entitled to the Logic Pro 9 upgrade to install on my brand new Macbook Pro using the serial number from Logic Studio 8 on the Mac Mini?  Or do I need to purchase the full version of Logic Pro 9 to put on the Macbook Pro?  The new Macbook Pro has never had Logic Studio 8 installed on it.  (In fact it won't install because the Macbook Pro is running 10.7.2.

    You can purchase the Upgrade and install it on your New MBP...
    Just have the Serial Number from LP 8 handy for when you are asked for it...
    After the install you will need to run Software update to get the Latest version of Logic 9 for Lion..
    Or you can Download it from Here
    http://support.apple.com/kb/dl1014
    Logic for Lion
    http://support.apple.com/kb/HT4807

  • Need 2 install Logic Studio 9 Audio content & Jam Packs?

    Have Logic Studio 9: didn't have enough space to download extras originally (i.e., Audio Content & Jam Packs).  Have now upgraded to 500 Gb HD for 2.4 Intel Core 2 Duo MacBook Pro and have tried to install Logic Studio again (The logic Pro; Logic Node; MainStage; and WaveBurner seem to have installed OK - at least they show up in Applications folder)  When it comes to installing Studio Content the Studio Content disk install process gets hung up at the end of the downloading. A message window pops up saying: The installation failed. The installer encountered an error that caused the installation to fail.  Contact the software manufacturer for assistance.  The Logic Studio software is registered to me and has a Support ID: I6941D2H41H.  It is frustratingly difficult to find anywhere that I can contact tech support related to this Logic Studio issue.  I would simply like to be able to get the included Audio Content and the Jam Packs from the Logic Studio Suite installed on my MacBook Pro.  I would appreciate some response and help to be able to get the application data so that I can fully install the whole Apple Logic Studio program ASAP.  A further suggestion is that a means of contacting support for such related issues be instituted.  Anyone know how to get the corrupted Audio Content & Jam Packs for downloading?

    Firstly you are Not addressing Apple here... This is a User to User Forum...
    That said... Give Apple Care a Call... Tell them you are a Logic Pro User and you should be transferred to a Logic Expert...
    Explain your situation to them...
    Make sure you have your Serial Number and Date of Purchase handy...

  • Logic Studio install - Sound Effects option disabled

    When I go to install Logic Studio, in the list of things to install the selections "Sound Effects" and "Music Beds" are greyed out and uncheckable. If I install everything I can select, it skips the discs Audio Content 1 and 2. Is there a way to get at least the Sound Effects option enabled?
    (This is for Logic Studio upgrade w/ Logic Pro 9, upgrading from Logic Express 8)

    So I understand correctly that you are not involved in creating music in any way? Then Logic is NOT what you are looking for. It is mainly aimed at either recording and/or composing original music, and not as a ready to select library sort of thing.
    Unfortunately, I can't tell you what you should get, but maybe one of the pro guys can help you out. You'll probably find some users here who actually make the sort of content you want to use.
    Logic Pro is the main program in the Logic Studio set.
    regards, Erik.

Maybe you are looking for

  • IPhone 4 completely inaccessible from Windows 7 machine

    Greetings, I have problem with my iPhone 4. As the title suggests I am unable to access my iPhone 4 (or iPod touch) in any way using my Windows 7 64 bit Ultamite service pack 1  based machine. The system doesn't: recognize that it is connected via an

  • Using imported archive in UDF using import statement

    Hello Expert, I am trying to use the class of keystore_api.jar which is impoted in imported archive in my UDF using the import statement com.sap.engine.interfaces.keystore.KeystoreManager but I am getting the error package com.sap.engine.interfaces.k

  • Set focus in Data tabel

    hi all, i am doing dynamic row addition in datatable and when new row is added focus was gone into the first row of the table but i want to set it into newly added row.. plz help me....its urgent

  • My little scroll button on top of my older model A1197 mouse.

    My little scroll button on top of my older model A1197 mouse works only intermittantly and usually, if at all, only in one direction.  ??

  • SAP ECC Service notification from CRM Complaint

    Hi, As there are some links and document are available to create the quality notification in SAP ECC from the CRM complaint, using action profile for this some setting also needed in SAP ECC QM, but as in ECC we already have the service notification