Major Modules / Options Being Covered In SAP-Healthcare
Dear All,
We are in the process of finalising the software for our upcoming hospital. So in this regard, we shall like to know that which modules are being covered by SAP-Healthcare...? Does SAP covers modules like Patient Registration (OPD & Indoor), Out Patient management, OPD billing, Investigations reporting (pathology & Imaging), Indoor patient management, Pharmacy etc. Rest, as we understand, SAP can very well take care for modules like FI, MM, SD and HR etc. But , for a hospital, the above mentioned modules are very much desired ones.
So, Please Advide further.
With Best Regards,
Sanjeev Chugh
29-DEC-2011 (E)
Hi Sanjeev,
most if not all of your requirements will be covered by SAP's [ACM|http://help.sap.com/erp2005_ehp_06/helpdata/en/b9/64a841c0dadf34e10000000a1550b0/frameset.htm](ambulatory care management) product and Siemens' [I.s.h.med|http://www.medical.siemens.com/webapp/wcs/stores/servlet/CategoryDisplayq_catalogIde_-11a_categoryIde_1026616a_catTreee_100010,1008631,1026620,1026619,1026616a_langIde_-11a_storeIde_10001.htm] product both of which are additional components based on and deeply integrated with SAP for Healthcare.
Documentation on all can be found on the general help page [here|http://help.sap.com/erp2005_ehp_06/helpdata/en/59/1c86353e13d558e10000009b38f889/frameset.htm].
Hope it helps and a very sucessful and happy new year 2012 to you.
anton
Similar Messages
-
1)
Is there North Bound Interface / API from SAP Solution Manager available for 3rd party integration?
i. The list of the modules that are being managed by SAP Solution Manager(s)
ii. The performance metrics of those modules/components at the high level
iii. The information about Early Watch Alerts (or situations to watch for)
2)
Is there a full SNMP interface for getting the above information from SAP Solution Manager?
3)
Is that understanding that SAP has SNMP support for forwarding alerts to a 3rd party system, correct?
4)
Does SAP has both free and licensed? If yes then what are the advantages of licensed over the open/free version?Mugunthan
Yes we have applied 11i.AZ.H.2. I am getting several errors still that we trying to resolve
One of them is
===========>>>
Uploading snapshot to central instance failed, with 3 different messages
Error: An invalid status '-1' was passed to fnd_concurrent.set_completion_status. The valid statuses are: 'NORMAL', 'WARNING', 'ERROR'FND at oracle.apps.az.r12.util.XmlTransmorpher.<init>(XmlTransmorpher.java:301)
at oracle.apps.az.r12.extractor.cpserver.APIExtractor.insertGenericSelectionSet(APIExtractor.java:231)
please assist.
regards
girish -
Can't get modulation option to show in arrange/view/hyperdraw
I want to edit automation data for the different tracks I set up and want to do this by drawing automation data in the hyperdraw section in the arrange window. However, even after selecting view/hyperdraw/modultation, the modulation option doesn't show up for all the tracks. For some of the tracks it shows immediatly, for other tracks nothing changes and the default option (Volume) stays. I did activate the view/track automation option.
Is this a bug in Logic? I wonder because sometimes after trying to change it many times, suddenly it works.Hi Sue...not Steve here...
You don't need to lock the image first, but it can aid in not selecting it for a bit.
Lock the image.
Create a rectangle covering the whole image.
Place the shape, or text, for the hole you want onto the image.
If text, make it an outline.
Select both shapes or the rectangle that is over the entire image and the object you want to produce the "hole" in the image with and make a Compound Path (Object > Compound Path > Make or Cmd+8 or Ctrl+8).
Unlock the image and select both the image and the compound path, then make a mask (Object > Clipping Mask > Make or Cmd+7 or Ctrl+7).
Take care, Mike -
Can we change the font in the email that is being sent from SAP ?
Hi,
I have a requirement where in we need to change the font for the contents in the mail being generated from SAP.
I am using the FM SO_DOCUMENT_SEND_API1 to send my mail.And the contents are just appened to an internal table as text elements.
Can we change the font in the email that is being sent from SAP to Arial 10points?E-mails generated with that function module are created in plain text format. The font that would appear when reading the e-mail would be dependt on the user's setting for the e-mail application (e.g. Outlook).
To my knowledge, the font cannot be affected during it's creation.
Hope this sheds some light on your issue.
-Mark -
Hi
I have 7 years of IT experience with 3+ year in healthcare. Currently I am working for NHS-National Healthcare Services u2013UK.
I have functional & domain experience of healthcare but not in SAP. I do not have any healthcare certification. My core skill is in Microsoft (web base technology and data base). I am interested to build my career in SAP healthcare.
Can I start my career in SP healthcare without SAP knowledge ? Where I can find SAP healthcare job ?
I appreciate your advice in this regards.SAP Patient Management is truly a global solution, of course the country-specifics (e.g. billing rules or other legal requirements) are covered in what we call country-versions which can be activated through configuration settings. My [blog|https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/6329] gives you some more details on the countries as well a [sample list of our world wide customers|http://www.sap.com/industries/healthcare/customersuccess/customerreference.epx].
I am very positive on the future outlook for SAP for Healthcare ) -
Login Module Options - How know which I can use?
Hello dear reader
I'm currently trying to develop a custom login module based on the Tutorial for NW '04 (https://websmp101.sap-ag.de/~sapidb/011000358700003517632004E.PDF).
In this tutorial on page 23 the author configures the Login-Module-Options as follows:
Name: "user_name_prefix"
Value: "Administrator"
This information can also be found in the java implementation of the tutorial where it checks if the "user_name_prefix" starts with "userName".
My question is:
How do I know what options I can access in my UserStore?
For example, I want to verify if the Email of the specified user ends with "@example.org" or if the user is assigned to the role "example_role".
How do I do this? How can I look this up? Where do I have to set this up?
Hope these are solvable questions and I hope, too, that this is not too noobie or to case-specific (like you'll say: "hmm, depends..."
Regards
MichaelI found it.
using configtool you can find it in a file called dataSourceConfiguration_xxxx.xml
or you browse through the portal; since I use a german portal I can only guess the english translations:
system administration - system configuration - UME configuration - first tab "datasource"
here you can download the file whoch contains the mappings between your data source and the UME.
regards -
SAP HEALTHCARE TRAINING IN INDIA
Hi
I Have 4 years experience in US Healthcare AR resolution, Iam working in Deloitte Consulting India. I would like to persue SAP modules related to healthcare consulting please advice.I have done my MBA in Supply chain management.
I would like to know if SAP healthcare modules are trained in India?
Edited by: Naren28 on May 1, 2009 8:33 PMHI Naren,
Can I be absolutely cheeky and piggy back your question, I am based in London, U.K and trying to find out SAP Health care courses in India or U.K. Hope you don't mind. if not, let me know I'll put up a separate thread.
Cheers,
Raj. -
How to create a custom function module with the records in SAP R/3?
Hi All,
How to create a custom function module with the records in SAP R/3? Using RFC Adapter I have to fetch the custom function module records.
Regards
SaraHi
goto se37...here u need to create a function group... then u need to create a function module. inside assign import/export parameters. assign tables/exceptions. activate the same. now write ur code within the function module
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm
Look at the below SAP HELP links, These links will show you the way to create a Function Module
http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm -
Best Practice SAP HealthCare Portal
Hi SAP Team,
I have a following questions about the SAP HealthCare integration with SAP Portal, What is the best practice for implementation in these case? Its necessary to develop the application using webdynpro or Now I available the SAP Portal Business Package for these solution?
Best Regards
RobertoI am also search on net & found some links & files about it, it found this PPT file on this topic, hope this will helps you.
http://net.educause.edu/ir/library/powerpoint/EDU03146.pps
[healthcare technology|http://www.nx3corp.com/] -
The bottom part of my firefox is being covered by my default Windows menu bar.
When it shows (i.e Done above the windows default menu bar) its being covered by the windows default menu bar.
Is the Firefox window too large or off to the bottom of the screen? Try resizing or repositioning the Firefox window. See [[Toolbar keeps resetting]] to restore the default window size/position and toolbar settings if you can't change the Firefox window or position, or if the changes to your Firefox window aren't saved when you next start Firefox.
If you need more help you should ask a new question in the support forum since this question was solved over a year ago and many Firefox support helpers don't look at solved questions. You can use this link as a starting point to ask a new question: https://support.mozilla.com/questions/new -
Function module to send mail from SAP
Can any one please tell the Function module to send mail from SAP. The scenario is like this,I have a file in local system that i have to send to a particular mail address like [email protected] through a report program.
Hi shafiq,
1. There is some trick involved
in the binary files.
2. I have made a program (and it works fantastic)
ONLY 6 LINES FOR EMAILING
BELIEVE ME
ITS A FANTASTIC PROGRAM.
IT WILL WORK LIKE OUTLOOK EXPRESS !
3. The user is provided with
a) file name
b) email address to send mail
and it sends ANY FILE (.xls,.pdf .xyz..)
Instantaneously !
4. Make two things first :
1. Include with the name : ZAMI_INCLFOR_MAIL
2. Report with the name : ZAM_TEMP147 (any name will do)
3. Activate both and execute (2)
4. After providing filename, email adress
5. Code for Include :
10.08.2005 Amit M - Created
Include For Mail (First Req F16)
Modification Log
Data
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
FORM
FORM ml_customize USING objname objdesc.
Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
Header Data
Already Done Thru FM
Main Text
Already Done Thru FM
Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
Receiver List
Already done thru fm
ENDFORM. "ml_prepare
FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
Data
DATA : pos TYPE i.
DATA : len TYPE i.
Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
CODE FOR PROGRAM
5.
REPORT zam_temp147 .
INCLUDE zami_inclfor_mail.
DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
EXTENSION = extension
NAME = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
regards,
amit m. -
How Production Order finish date and time is being comptued by SAP?
Hello Expert,
How Production Order finish date and time is being comptued by SAP? for example, we create a Production Order via CO01, the basic start date is 29.09.2008 and time is 04:00 it gives us basic finish date is 29.09.2008 and time is 13:28.
how does SAP compute the time 13:28 as it finished time
Please explain me briefly.
Thanks
RyanHello Guys,
When we create Production Order in R/3 the time is calculated by routing but it is extended at SetUp machine time. It is not correct?. SetUp imachines time used only for first Production Order for the same product and it is plan manually, for others Production Order we need calculate time for production without SetUp machine time being pick up to compute finish time. how could we achieve this? only those Machine time will be check.
thanks -
How to copy a Module Pool Program from one SAP server to another SAP server
Hi Experts,
My requirement is to copy some Module pool programs from one SAP server to another SAP server which do not have any link.
Please advise on this.
Regards
Dipakput all relevant objects inside a transport request and release it. this will generate two files, a control file in /usr/sap/trans/cofiles/ and a data file in /usr/sap/trans/data/
you can take these two files, zip'em up and e.g. email them to your destination. There they have to be put into the same directories of that other server and can then be added to the import queue and finally imported.
These last steps would usually be done by an administrator.
Both systems should be on the same release, as far as I know.
Cheers
Thomas -
Hi,
When POST method is triggered from JAVA with parameters and values, I could see that data is being coming into SAP but when it reaches create entity data is missing. No values do populate in the fields. Not sure where the error is. I get status code 201. But, when debug in SAP no values has been passed to my create method. Please help.
Regards,
Vikram.Hi,
When POST method is triggered from JAVA with parameters and values, I could see that data is being coming into SAP but when it reaches create entity data is missing. No values do populate in the fields. Not sure where the error is. I get status code 201. But, when debug in SAP no values has been passed to my create method. Please help.
Regards,
Vikram. -
i am unable to import my favorites from internet explor due to the import data from... option being grayed out under his, library, import. any help please
Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
To see all History and Cookie settings, choose:
*Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
*Deselect: [ ] "Always use private browsing mode"
Maybe you are looking for
-
Import fixed asset data, error occur.
Dear all, I imported fixed asset master data as following: FA21600111;602;Dell电脑;OPTIPLEX 380DT ;2010-03-26;;;;G300662098;非生产设备;104;;3179;1;3179;100;2010-04-01;60;60;LINP;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; SB1 prompted system message
-
Efficiency Question: Simple Java DC vs Used WD Component
Hello guys, The scenario is - I want to call a function that returns a FileInputStream object so I can process it on my WD view. I can think of two approaches - one is to simply write a simple Java DC that does so and just use it as a used DC so I ca
-
Veriface: cannot add a new user, and i forgot my password?
Hello I just got a yoga 2 13 and the veriface program did not get a good picture of me or my wife. I deleted the accounts, but i cannot see an option to add my user back. It scans my face and puts my name in then asks for a password which i cannot
-
Can't Enable BlackBerry Device Analyzer on 9850
According to this knowledge Base technote, you can enable Device Analyzer by pressing ALT and typing BBDA in the Options screen. http://btsc.webapps.blackberry.com/btsc/viewdocument.do?noCount=true&externalId=KB31922&sliceId=2&cm... On My Verizon Tor
-
Which format to burn in?
Okay, I have a smallish HD (10gb) and I want to burn some songs from my CDs. Which format should I be burning my songs into? I've tried burning them in both mp3 and AAC format and I DON'T see much of a difference, size wise.