Major mouse problems in Virtualbox 3.0.2

I'm running an Arch Linux VM running on VB version 3.0.2 running under an Arch Linux host (both x86_64 if that matters). As you x86_64 guys know, one must use thotypous's package in the AUR for VB on x86_64. Anyway, the VM boots up just fine and is fully functional, except that the mouse in the VM simply stops working after a while. It seems to be stuck and invisible trapped in the lower right of the screen; my only option is to restart the VM.
Has anyone else experienced something similar?

I ended-up nuking my VM and hdd file, rebuilding it from scratch and am experiencing exactly the same issue w/ the mouse. Everything is fine in my XP VM, it's just my Arch x86_64 VM that has this damn mouse problem!

Similar Messages

Major system problems, hanging up at startup.

I'm developing some major sytem problems with my G4 Mac. It all seemed to start with a jumping cursor and then a dying mouse. I could not get the Mac to startup with several trys. It wouldn't even start up off of my external drive. I would get the first four icons in the upper right hand corner of the screen and the it would hang. I tried all of the usual fixes- permissions, disk utiliy, Disk Warrior, zapping pram. I finally started unplugging external items and getting back to original Mac- switching the firewire port in the back of my Lacie external drive helped for awhile, but now I'm getting the jumping cursor again and fearing I'll get a hangup again. Any ideas on how I can solve this problem? If not, can you point me somewhere for instructions on how to reinstall the system software? I have already installed a clean system on my external drive. Once I reinstall all of my apps there, and get it running properly, can I move all of that to my internal HD somehow? My original system disks for this computer is Jaguar 10.2 if that helps.
Thanks for your help,
Dick Skover

Dick,
Some observations and notes.
Have you tried using a different mouse, or changing
the port it is plugged into?
Yes, I tried and am using a inexpensive Logitech optical mouse. The one that came with the computer seemed to get very eratic and then not work at all. I did try plugging into different ports and that didn't make a difference.
How did you upgrade from Jaguar 10.2.x to
Panther 10.3.9?
I upgraded the simplest way, I guess. I had read about more complex ways to do it at the time Panther came out, but also heard you could do a simple upgrade. I don't remember the exact steps I used. Boy, this is way more complex than my original Mac in 1984.
What size is your Hard Drive, and how much space is
available? I should say I have quite a few applications.
My HD is 75 Gig with 17 Gig available.
Is your installed RAM original or added?
Yes, it came installed when I purchased it: 1.5 Gig
In one post you wrote "My original system disks
for this computer is Jaguar 10.2..."
I heard something back when Panther came out that the fact I started with 10.2, didn't allow me to do certain things like archive and backup.
But in another, you wrote "Yes, my original
Panther disk and then updated everything via
Internet."
Please clarify.
When I decided to install a clean system on my external HD I just used my Panther 10.3 disk- I didn't go all the way back to 10.2
"Yes, Disk Warrior found some problems, I don't
know exactly what they were."
Were the errors corrected? Have you rerun Disk
Warrior, to see if they are indeed repaired?
Actually I ran DW today again on the internal HD and it came up with a couple of problems that it said it repaired. Should I keep running it until it doesn't indicate any problems?
A couple other things you can check.
Open System Preferences > Accounts > Your Account >
Startup Items.
Is there any item in there that you are not familiar
with, or did not put there yourself?
Yes I did try that- I had a repair person come in to help me. He did point that out and we deleted items that didn't need to be there. What he suggested did help for a week, but the problem came back. I called him again, but he said the only thing left to do was re-install.
From the Utilities folder, start Activity
Monitor.
Select Active Processes.
Watch for whatever process is hogging %CPU.
Yes he ran activity monitor also- there didn't seem to be programs hogging the processor although we deleted those that look familiar.
I also have a question about the title screems that pop up on start up. In the past I used to have several things being checked as it went through the process, now I get welcome to Macintosh and that's it. I seem to remember indications that Macaroni was running, but no longer see any of that. I do have Macjanitor also and thought that one of those automatically runs at startup?
I will run pseudo daily, weekly and monthly tasks now. Is this something that Macjanitor does, or should I run the maintenance scripts periodicaly?
ali b

Problem in VirtualBOX.

I got a problem in VirtualBOX, hope someone can help me.
Why is my mouse (or touch pad) response sluggish when I installing the Window 7 (or Ubuntu 10.4) in VirtualBOX ?
the host OS works fine but VirtualBOX.
I share 4GB memory and 128MB video memory to VirtualBOX, is it any setting I should change ?
PS : My NB is Macbook Pro 15" i7. (8GB memory)
Thanks in advance ~ ^^

I have used VB on my MBP for some time and have Win7 (64bit), Win2000 and Ubuntu virtual machines all working well.
I suspect that you may have allocated all CPU cores to each VM. I found that will cause the whole machine to become sluggish. I reduced the numbers of cores to: Win7, two (of four on my MBP), and; Win2000 and Ubuntu, one each.
Of course, only have one machine, including the MBP, doing heavy processing at once.
Also keep in mind that installing an operating system is CPU intensive.
Hope that helps.

MSI K7N2 Delta-ILSR, Mouse problem & Video off problem solved!!!

I find the following information that I collected very interesting at the very least...
Here goes...
The video off problem that I was having was directly linked to the mouse. Here, let me explain the video off problem. In the BIOS Have the Standby mode set to S3. The problem occurred when I started windows, then went into standby, then started back up, then restarted the computer, the monitor would act as if it were in sleep mode, or rather there was no signal being sent to the monitor. Well the odd way I fixed that is by plugging in a standard 2 button PS/2 mouse. Also this fixed the issue with the mouse sometimes not working in windows.
Here is how I tested.
Logitech MX700 Cordless Optical Mouse, PS/2 & USB= failed.
Logitech iFeel Optical Mouse, USB= failed.
Microsoft Cordless Ball Mouse, PS/2= failed.
Standard Artec (Cheapy brand) Ball Mouse (With no wheel), PS/2= All issues fixed, and passed.
When I said failed I do not mean they didn't work, I mean they sometimes didn't work and also caused the Video off problem after restarting the computer.
Obviously it isn't the ports (PS/2 or USB) that are the problem, it is more like the mouse itself, and the amount of buttons in particular. As you can see above the only mouse that works correctly is the one that only has 2 buttons, the rest has 3 or more buttons along with a Wheel. The MX700 has 8 buttons + wheel, WOW!
Anyways I figure out it was the mouse, and not the memory.
Obviously MSI needs to make a patch for this mouse problem.
I'm still having a hard time believing that the mouse caused the video not to work, but it is true! I spend well over 5 hours testing this crap. Every time with the mice with more then 3 buttons it messed up, and every time with the 2 button old fashion mouse it worked flawlessly!
MSI, get to work on a new BIOS to fix this mess!!! :]
BioHaz

Quote
Originally posted by Raven_
hi
its possible to use an ps/2 mouse AND a usb mouse at the same time.
i used the ps/2 mouse in windows and the usb mouse when playing games.
you can get some trouble if you do it the way i did it.
i was in windows surfing and the pointer just jumped all over the screen.
when i looked on the other side under a table a friends little kid played with the usn mouse. )
bye
LOL, that isn't what I'm talking about.
There seems to be a problem with my motherboard accepting mice with more then 2 buttons. It works the first time, but if you restart the computer, the video goes off. If you have both installed, it still messed up.
BioHaz

Mouse Problems Since 10.6.8 Update

Since I applied the OS X 10.6.8 update to my MacBook, I have started to have very annoying mouse problems. Sometimes the mouse gets stuck on a window or icon as if I am dragging it. More often, the left mouse button stops doing anything and the right mouse button starts acting like the left mouse button. At the same time, the mouse is often incapable of clicking on a highlighted button. Safari often seems to be open when this happens.
I have tried two different wireless mice and, most recently, a basic corded mouse. I have also tried both USB ports with the corded mouse.
Has anyone else seen this and figured out how to fix the problem?

Same problem here with a macbook pro. I desactivate teleport to see if the problem is related.

Using iMovie 7.1.4 on an iMac w/ Snow Leopard; HD video imported with a Firewire cable transfers fine, but audio arrives with major static; problem persists w/ different cameras

Using iMovie 7.1.4 on an iMac w/ Snow Leopard; HD video imported with a Firewire cable transfers fine, but audio arrives with major static; problem persists w/ different cameras & Firewire cables; source DV tape has no audfio static.

I forgot to write down my computer specs:
iMac 27 Mid 2011
2.7 GHz Intel Core i5
4 GB 1333 MHz DDR3
AMD Radeon HD 6770M 512 MB
OS X 10.9.2

Mouse problems with v10.7 Lion and VMWare Fusion 3.1.3; reboot of Lion temporarily fixes it

Since installing Lion, my VMWare Fusion 3.1.3 Windows 7 and XP virtual machines have very strange mouse problems. I thought it might have been caused by 3rd party software on my iMac (Mouse Zoom), because it seemed to work after removing the software, but I have now discovered that it is actually the reboot of OS X v10.7 (and now v10.7.1) that temporarity removes the problem. However, after a while the problem comes back, requiring another reboot of Lion.
The problem is strange behavior of mouse button clicks inside the virtual machine, e.g. unable to double click on a folder or program in Windows because it jumps back to the higher folder tree, as if I had hit the ESC key. In addition to my USB and BlueTooth mice, the Mac touchpad also has the problem. I have confirmed that the problem is probably in how VMWare maps the iMac human interface devices (HIDs) to the virtual mouse inside the VM, because I am able to get correct mouse function by attaching one of my mice directly to the Virtual Machine (there is an edit to the VMX file that enables HID devices).
I have deleted and reinstalled VMWare Fusion 3.1.3 per suggestions on the VMWare support site and/or various forums, but that did not help.

According to: http://roaringapps.com/app:61 Version 3.1.3 has issues with Lion. There is a 2011 beta that works better.

My PS/2 mouse problem :(

for some time now i boot up the computer and every other time the mouse works, i now use a usb keyboard and before when i had a ps2 keyboard it was that that wouldnt work, sometimes the mouse wouldnt work and when i restarted with pressing Ctrl+Alt+Delete twice and tabbed to the shutdown in the box that came up when it was time for windows to let me log in my keyboard wouldnt work and i had to use the mouse to restart, eventually the mouse and keyboard would work together after a few restarts using this method.
well now i have a usb keyboard and it works all the time so the mouse now works every other boot or reboot, i am guessing maybe i should of gotten a usb mouse along with the keyboard but the keyboards that came with mice together were kind of ugly and small so i got the Gigaware usb keyboard, plus four of the five usb slots in the back of my computer are currently being used(one for this keyboard, one for my gigaware headphones, one for my webcam, and one for my printer) the only one empty is the one connected to the D-link Bracket thing that has the four lights that light up a certain pattern to tell you if any problems, i had my ipod shuffle hooked up to it once recently and when i opened or restarted my computer nothing would load up, really not sure why so i dont leave the ipod shuffle connected to my computer, just that time to test it because i just got it not too long ago, been trying to resolve my computer issues so no time to do anything with it lol
so back to the main issue....my mouse works but every time i restart it doesnt or if i start up my computer it doesnt work and then when i restart it then it works. I have searched for the passed month with google looking for similar issues with this mouse problem and i have seen a few people with the same problem but no solution, i personally will be getting in more detail than any of these people have been in those forums i have visited.
so i have tried a few different things to try and correct this problem and none have worked so far. I have looked in the BIOS for any setting related to the mouse and have found nothing, i have uninstalled the mouse in Device Manager and restarted my computer still with the mouse being detected and sometimes not until reboot
the last thing i did was most interesting to me, i had my computer shut down and thought to try and see what happens if i have no mouse physically installed so i unplugged it and turned on my computer and when the screen came up for me to log into windows there was the pointer in the middle of the screen just the same as the times my mouse would be frozen and i need to restart to make it work.
now further into my observatory skills hehe i happened to eventually get really curious at the boot up screen after the detecting of my drives and before the microsoft windows logo and i got more near to what i think is causing this mouse issue yet i dont know how to correct it, i pressed Pause/Break to read what was there because it was to fast to read in the first place and i finally notice it is PCI listing devices and there is a list of devices and IRQs that each one is using, before all that though i noticed in my readings that the mouse IRQ was 12 always and this part of the screen that i saw really confused me was that after many tests i noticed that each time the mouse didnt work i had seen when i froze the screen to read that IRQ 12 was being used by SMBus Cntrlr and also Multimedia device and when i restarted then those two were using IRQ 11 and my mouse worked
this was really strange and i do believe that this is part of the source of my mouse not working, i am stuck and have been for some time now on this and i dont know what i need to do from here, i was also thinking maybe i need a new power supply because sometimes when i first start up my computer i can tell my processor fan struggles to spin a little even after it is clean and i do clean out dust on a regular basis, but i dont know about the power supply thing, its just a guess because i think it may be pushing out as much juice as it can to power up all four of my usb connections, my processor, my fan, my video card, and my mouse which has that frozen in the middle of the screen problem when i boot up my computer before i can log into my windows account
also i am more moving away from my power supply hypothesis because i can leave my computer open for a long period of time and my mouse never freezes up, i really need some help with this, thank you for the time spent in reading all this and any help i may be offered to correcting this issue, i have a couple more questions but they are not related to this issue so i will submit this one and send my other questions in a different message, thank you again

ok first of all i would like to thank all those who have read and given input and helped me with everything, thank you all so much
second is the story i have left out from the start of my blue screen of death problem and what it may have to do with the RAM.......
two days ago i started to put together my motherboard in my new case and new RAM and power supply, first i started with the motherboard transfer, i unscrewed it all fine and put inside the new case, but before i had it laying on my bed while i prepared the screws inside the new case, i put in my cd drive and hard drive, then i installed the power supply and connected everything, when it got to the RAM i took out the one 512 and the 256 and left the other 512 as it was and if you know about the K7N2-L motherboard then you know that two RAM slots are side by side and one is a little further off, well the one that was a little further off had the 512 so i put the 2x1Gb Patriots in the slots that were together
then i started installing more of the power connectors from the power supply and i noticed on my bed one little piece and had no idea where it came from, i started looking and thinking where have i seen a similar piece before and then saw that it was a RAM clip and how it came of the slot eludes me even to this moment, i didnt think it a big deal so i took the 512 out of the slot it was in and put the 1gb in its place and the 512 in the middle of the two 1gb chips, so one 1gb and the 512 were in the slots side by side and the other 1gb chip was in the slot further away from the other two and that was the one with the broken clip, yet it ran through the memory tests and even showed up in Sandra but i am thinking now that maybe it is the reason why i have gotten 26 blue screens of death since yesterday when i first started up my system
so now i removed the 512 and put in its place the 1gb from the broken clip slot and i started it all up and went in bios and see the timing are automatically set at 2.0-3-2-5 and so i also set the frequency voltage at 2.7V just as a test and so far since i have been typing this message i see no blue screen
the broken clip slot is broken at the clip but i had it in there and when the chips was installed i tugged a little to make sure it was being held in there and the fact the memory showed up on my system lets me know that it registered but i think that because they are two different types of RAM they may not have been compatible so i was getting the blue screens, the patriots are stock timed at 2.0-3-2-5 @ 2.7V and the Corsair is 2.5-3-3-8 @ 2.5V but then i think again it is because of the broken clip slot now because before when my system had the two 512 and the one 256 chips and no broken slot clips and i had the voltage set at 2.6 and also 2.7 with no BSOD issues............
so now here i am Single Channel Ram with timings of 2.0-3-2-5 at 2.7V and no blue screen so far but that extra 512 would have been nice but oh well i guess, maybe 750 mb more RAM than i had before is not so bad.......but i am power hungry just as are the rest of you when it comes to the computer system
i wish i had one more 1bg patriot chip to test my theory but then again if it didnt work i will have an extra chip to look at which will make me go
well i guess that is it for now, it is just a time issue now to see how this 2gb works out for me, but i want 2.5 gb
my next project is new motherboard and new processor and new ddr2 or ddr3 RAM but by the time i need that upgrade ddr5 or 6 may be in use i hope in that time the prices are good and for some reason AMD gets my attention more than intel, i dont know why
well ok i have been typing this for quite some time now and no blue screen so this is good news, i guess the question now is do you think the problem was due to the broken RAM slot clip or because the Corsair RAM was timed to run at 2.5-3-3-8 at 2.5V and the Patriots' are timed at 2.0-3-2-5 at 2.7V and together they are just not compatible?
thanks again for everything

Adobe Captivate 8 projects published to HTML 5 shows major loading problems and stops

Adobe Captivate 8 projects published to HTML 5 cause major loading problems in most browsers(IE 11, Chrome v. 35.0, Firefox v. 31). Loading… (screen)
The view stops after a while and only the Loading… (icon) can be seen on the page.
Is this a known problem with Captivate projects published to html5 and is there a way to fix it? What is wrong?
Test the html5 version of this project at: http://kurs.dokker.no/captivate/
and see for yourself what happends.

I changed the Preferences/Project/Start and End Preloader % to 25 and published the projects again. The course: http://kurs.dokker.no/captivate/elev/
stopped like before on one of the first slides, loading… screen like before in IE11.
In Chrome v. 37.0 the course worked badly, would not run, sound missing and buttons not working.
In Firefox 31.0 the course worked to a degree even if the program was advising to use another browser for this content.
In Opera 23.0 sound was missing and else working as bad as IE.
All this testes is done on a PC using Windows 8 connected på internet via ethernet, download speed: 66.57.
I would like to use the HTML5-format since it has a cleaner view than swf-files that appear to be jagged, but there is a lot missing before Adobe Captivates html5 publish is where it needs to be. Her are the complete html5 course and here are the swf based course for comparison.

10.4.9 - Major audio problems with digital audio

I have a Digital XMPCR radio with Edirol MA-20D Digital speakers
I now have major audio problems, the audio is garbled and doesn't sound as strong. Kinda like a FM radio in a car that is loosing signal when you are traveling.
I use this XMPCR for a couple of hours a day and had no problems this morning prior to installing the update.
I have a XMPCR that was modified for Toslink/Digital connection. I connect the XMPCR to my Mac Pro 2.66 with toslink cables and connect my Edirol MA-20D digital speakers with toslink cables. I use Amoeba's "LineIn" for audio pass through.
I thought it might me the FTDIUSBSerialDriver so I reinstalled it, did not fix the problem.
I also have a real bad "buzzing" sound going on in the background. When I quit JXM (the application for changing channels on the XMPCR), the "buzzing" goes away but I have a rapid ticking sound coming out of the speakers until I quit LineIn.
Anyone else have any problems with their digital audio input/outputs?

I dont use the digital XMPCR radio, but I use Digital Performer to record audio and MIDI and I use exclusively the Built-In Audio input and Output and everything is working fine after the 10.4.9 Upgrade.

Major iPhone Problem

Hello,
I'm having a major iPhone problem!!!
My phone crashed yesterday and wont turn back on or charge since then. It will start up with the apple logo and then the screen goes dark, will only stay on for about 30 secs. It's an original not jailbroken or anything like that. iTunes won't recognize it at all, I tired resetting it, hard resetting it, a different cord, basically everything and NOTHING works!
Please help! Thank you!

try doing a hard restart - hold home + power until the phone shuts down... then connect it to your puter.
you may have too many things running in the background on the phone... i have heard fetch & push can drain your battery like you experienced... i don't use them, i get my mail when i open the application.

After Int Install OS10.5.8 on PowerPC G4 having major system problems (created user to verify) CS4 apps go non responsive

After Int Install OS10.5.8 on PowerPC G4 having major system problems (created user to verify) CS4 apps go non responsive

Ok no difference, I don't get any drive errors that seem significant or numerous, sometimes I don't get any at all, the disk always verifies and I haven't had to run a repair on it yet. I've gotton one or two drive errors, I'll save them next time I run either DU or DW.... however with permissions, there are a lot and they all fix (except: see below: Last 3: ACL errors are always there) but as I keep having to do force quits and system re boots they keep coming back; posted them below IDK if this will help you to help me, LOL... but figured it couldn't hurt, the ones below are re-occuring I know i've seen them b4. . . Don't know if this makes a difference but on initial install I had several font conflicts w/system fonts, I renamed suitcases and that error message hasn't come back . . . but do you think this could be a font issue . . . I have like 12,000 fonts of which a couple hundred are ususally always active . . . IDK it doesn't make sense to me it would be, but you never know... just a shot in the dark
I also saved my last PS crash report and it was like 100 Pages long, I've never seen one that long, I make a pdf of it and post link to my idisk, if its something that you can interpet.
Verify permissions for “Rayce”
          Reading permissions database.
          Reading the permissions database can take several minutes.
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
ACL found but not expected on "Applications/Utilities".
ACL found but not expected on "Applications".
ACL found but not expected on "Library".
Permissions verification complete
Repairing permissions for “Rayce”
          Reading permissions database.
          Reading the permissions database can take several minutes.
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
ACL found but not expected on "Applications/Utilities".
ACL found but not expected on "Applications".
ACL found but not expected on "Library".
Permissions repair complete

Nightmare Mouse Problem

OK, this one is baffling me and has become a nightmare.
Since this past weekend I have had a mouse problem that I cannot resolve on my own and no matter what I've tried, nothing has resolved the issue.
When using the mouse, it is not responding to mouse clicks. Moving a window takes repeated tries and does not move to where I want it to go. Most times, trying to move a window minimizes it to the dock. Clicking on items takes multiple attempts to select them or highlight them. Highlighting text is near impossible to do accurately, as is relocating the cursor. Selecting items on the desktop is hit or miss and sometimes the items will launch without double-clicking them.
I also have a Wacom tablet and this device works perfectly, although I have dual displays and it only is mapped to one display.
Things I've tried:
Since I am on a dual-bootable (2 drives/2 OS's) Mac and have dual user accounts on each drive, I've tried using each user account on each startup disk. The mouse behaves exactly the same way on all of them.
Tried using a different mouse.
Removed the tablet from its powered USB port on the rear of the Mac and tried the mouse in that port. This improved the ability to select an item on the desktop but in doing so, the item launches with one click.
Checked System Preferences/mouse settings and they have not changed.
Verified and repaired permissions using the OS 10.4 installer CD.
Scoured the Net for info as to why no mouse is working but a Wacom Tablet would be in the same port.
The mouse was originally connected to the right side of my keyboard. Tried the left side port, as well as the powered USB port on the back of the Mac where the tablet was connected as mentioned above - and I also tried the other powered USB port.
I'm at a loss now as to what to do.
Can somebody please help?
THANKS

I've got a Logitech two button scrollweel mouse.
Contact Logitech tech support and check their website to see if you need to update the mouse drivers http://www.fixya.com/support/logitech
Or post in their forums http://forums.logitech.com/logitech/

Help!! Seriously Frustrating Mouse Problem!!

I can't seem to figure out where the problem lies. It must be the computer or OS because I've tried different mouses and the same thing is happening:
Clicking the mouse seems to keep registering as 2 clicks! Its as if it is registering the release of the click as a second click because if I'm real careful and click and release slowly it doesn't happen. As I said, it happens no matter what mouse I plug in. I tried changing the mouse preferences and buying a new mouse pad which seemed to work for a while, but now its happening all over again for no reason.
Any ideas? Its pretty weird.

Were the different mice the same brand and model?
Try playing around with only the mouse and keyboard attached (disconnect all other USB peripherals) and with the mouse attached through the keyboard and directly to the eMac. If the mouse begins to behave normally, add USB peripherals back one at a time, checking to see if the problem recurs, in which case you can either replace or isolate (using a self-powered USB hub) the offending device.
If you create a new administrative user account (use it only for troubleshooting to avoid changing default preferences as little as possible), does the mouse problem appear in that account as well?
In your normal account, did you try moving the old preferences file to the desktop or trash to force creation of a new .plist file, then make your settings changes? (I think you want the Library> Preferences> com.apple.desktop.plist file for the mouse settings.)
If either the troubleshooting account or the new prefs file tests work, you can use Preferential Treatment to check your preferences files.
Did you install manufacturer's mouse software with any of the mice you've tried? This is one of those "whatever you've tried, try the opposite" things --- if System Preferences> Other shows any mouse-related extensions (e.g., Control Center), try removing that and restarting. Conversely, if you never installed anything from the mouse manufacturer (and for generic three-button scrollwheel mouse support under OS X you don't need to install anything), see if adding the latest software from the maouse manufacturer's website helps.

MAJOR EXPORT PROBLEMS! PLEASE HELP!

Hello. I hope everyone had a nice holiday. I'll try to be brief. I'm having a horrible problem with exporting my films. I work on a PC. To me, that shouldn't matter, but here's what's been happening. I shoot my films at 23.976 frames on the 5DMII and the 7D. My film got into a film festival. They asked for a 720p mp4 file. OK, no problem. I went under H.264, I exported an HD File, with 23.976 frame rate and I checked both boxes for Max Render and I set a 2-pass. I exported and when I played the vid back through Windows Media Player, it felt fine.
BUT, at the festival this past weekend, I was horrified to discover that my film, and no other films, was having a major sound problem. The audio was about half a second ahead of the footage, so they kind of looked like they were speaking correctly, but their dialogue would finish right before their mouths would. Super embarrassing. All I noted when I saw the tech booth was that they were using a mac laptop hooked to the projector, so I assume maybe it was quicktime they were running? Also, I believe they put all of the vids together as one file so it would run together as one block, but still, I believe most of the other films were shot at 23.976 frames as well, so that shouldn't matter.
I went home, thinking maybe I just wasn't being diligent enough and I needed to really look at the sound. Maybe it was off. But I keep all of the temp tracks, the sound from the dslr, on track 1 and then just mute it. I unmuted and played both tracks, and there's no difference. No echo, no weird delays, they're both perfectly synched up.
I've been having this problem for a long time but this was the first time that I REALLY could see the problem, probably because it was on such a big screen. Just my opinion, but I've found that most festivals are running MAC software and it seems like the vids I export seem to have an audio problem being played through mac programs. Another instance, briefly. I did a screening for a feature I edited. I exported an HD mp4 and put it on a friends MAC. The sound was off when we pre-screened it. I have a PC Toshiba laptop, I ran the vid through windows media player, and it felt much better, so we screened using my laptop and it went fine. But what does that mean?
Has anyone else had this problem? It's not just festivals too. I have a subscription with Vimeo, but every short film that I put up there has some kind of an audio drift problem. It's always minor so some people see it and some people don't, but I'm certain the vids are fine on my timeline. Do I need to export using something else? A different setting? As a quicktime vid? That last question seems kooky since any tutorial I've seen is usually wanting h.264, so I just don't know.
Please let me know if there's anything I can try or if you just have an opinion. Thanks very much.

im sorry i cant seem to start a new topic PLEASE HEEEEEEEEEEEEEEEEEELLLLLLLLLLPPPPPPPPPPPPP
all of a sudden about half an hr ago my computer froze & went all spastic. i retsarted & now ALL MY SONGS ARE GONE FROM MY IPOD!!! I HAD 10 000+ SONGS HOW DO I GET THEM BACK!?!?!??
please tell me theres a way. when i check the ipod itself it says 0 songs 0 videos but strangely my 87 photos are still on there. also when i reconnect it to the computer it says to restore its factory settings but when i go to update/restoe it says i have 10GB left (its a 60Gb video ipod) so i think the songs are still stored there but i cant access them or something please help me!!

Major mouse problems in Virtualbox 3.0.2

Similar Messages

Maybe you are looking for