Major Photoshop problem in Tiger

I'm having some serious problems using Adobe Photoshop on my Dual 2.3GHz Power PC G5. I'm running Tiger (10.4.6).
When I try to open an existing file (JPEG, TIFF or PSD), or try to create a new one in Photoshop - I just get a message saying:
"Could not complete your request because of a program error"
It's basically rendering Photoshop useless. I haven't had this problem when using this software on older G5s so am wondering if it's a Tiger issue. I've been on the Adobe site and have tried a couple of suggested solutions without success.
If anyone can help with this it would be greatly appreciated.
iBook G4/Dual 2.3GHz PowerPC G5/60GB iPod Photo Mac OS X (10.3.9) Aberdeen, UK

Unfortunately I don't have "the" answer, but have you gone through the typical steps to figure out a crash? Such as...
De-install / Re-install Photoshop
Repair Permissions (before and after install)
Delete preferences (best to just move to a safe location)
Good luck, I know these kinds of problems can be a real pain to solve.
Jeff

Similar Messages

Major Photoshop Lag - 2013 MacPro

Having some major Photoshop problems, and this is a BRAND NEW computer, just put into production...
I'm using Photoshop CC 2014.
Initially, everything works great. However, after working for about 30 min to 1 hour, or retouching about 15-20 images, the clone tool preview starts lagging heavily. The tool itself moves fine, but the preview only appears when I stop movement of the tool. It doesn't do this initially. Also, when this starts happening, just moving a small layer around also lags. It doesn't matter what size the file is either. The only way to fix it is to reset my preferences. However, after a short amount of time, it does it again.
Here is a list of things that I have tried but hasn't fixed the problem:
Disabled plugins.
Made sure my tablet driver was up to date.
Closed Photoshop and use Memory Clean to free up memory.
Rebooted Mac.
Did a hard reset on the Mac as well as cleared PRAM.
Ran the Apple Hardware Test (had no errors).
Unplugged any extra peripherals (wacom tablet, extra monitor, all external hard drives)
Uninstalled Photoshop CC 2014 and used the cleaner tool from Adobe to remove all files.
Adobe tech support had me make a new Mac admin account.Adobe tech also had me log in to root and try.Adobe tech checked my Photoshop settings, cache levels, graphics card settings etc.
Disabled any fonts other than system fonts.
Downloaded and installed older Photoshop CC version. (no extra brushes, plug-ins, actions etc. were installed).
Worked off of one monitor with minimal palettes open.
I feel like after trying all this stuff, it's definitely a bug in the program.
The KEY test here is the following:
I even sent my preferences file to a friend who also has a 2013 Mac Pro. When he uses my preferences file, his does the EXACT same thing. However, the difference being, when he goes back to his old preferences file, the problem doesn't come back like mine.
Again, I have tried Photoshop CC 2014 AND CC without any plug ins, extra brushes, actions, styles, shortcuts, etc. and it still does it.
I'm running a 2013 Mac Pro Quad 37 GHz CPU, which has dual Firepro D300's with 2GB video ram, and 12GB of 1866MHz DDR3 RAM. Mac was purchased brand new. OS is Yosemite 10.10.2
here's a video showing the exact problem... (working even on a low resolution .jpg which should be blinding fast)
http://youtu.be/IbOr-_30P5k
Adobe is trying to help, but getting nowhere, and this IS a problem, it's a brand new machine with a brand new install of the OS, and a fresh new user account, and a fresh install of CC2014, this should not be happening.
By simple process of elimination tests, this cannot be a hardware error or an OS error or anything of that nature, otherwise it would not replicate the problem on a friend's MacPro who I send my prefs file to... the fact that the prefs file replicates the problem, PROVES it's a problem with the adobe software. and a solution must be out there?
Thanks in advance for any help.

Thank you for the reply, I appreciate it.
Now, interesting thing is, I know of two other Macpro's one 2013, and one an older quad-core macpro 4,1 both running 10.10.2 and neither of those have this issue?
and the other confusing part to me about this, is why would friend's 2013 Macpro NOT have this issue until using THIS prefs file, if it was an Apple thing?
thanks for your help!
Bill

MAJOR FONT PROBLEM - GREEK FONTS - GREEK SYSTEM

Dear All
I own a G4 purchased from a local Apple Authorized reseller for greece Rainbow computers in order to be able to use Greek fonts. Recently upgraded to OSX Version 10.4.3
However I'm facing major font problems in applications such as Adobe Software i.e CS2
Greek fonts that actually work are very limited. For example in Illustrator only Myriad Pro and Lucida Grande function properly.
In Macromedia Freehand although a few more greek fonts work, they either disappear or become scrambled when I attempt to "Convert them to curves"!
This only applies to OSX Tiger. Panther seemed to be working fine for this, in Freehand.
I work as a graphic designer and it is very frustrating when I'm only limited to very few greek fonts even on a GREEK SYSTEM!!!
By the way: I tried all suggested methods on the forum such as: Greek keyboard layouts, verifying permissions, switching to System Greek Language, reinstalling Illustrator etc..
Is there anything else that i can do?
Pls help.. !

I own a G4 purchased from a local Apple Authorized
reseller for greece Rainbow computers in order to be
able to use Greek fonts.
Generally speaking, for problems with Rainbow's stuff you need to consult Rainbow. Apple itself does not produce a localized Greek system or the special add-ons that Rainbow provides to let you use non-Unicode Greek with older apps.
However I'm facing major font problems in
applications such as Adobe Software i.e CS2
Greek fonts that actually work are very limited. For
example in Illustrator only Myriad Pro and Lucida
Grande function properly.
For an app like this you probably need to use Unicode Greek fonts. Those that come with Tiger are Lucida Grande, Helvetica, and Times. If you have MS Office 2004, you can also use Arial and Times New Roman and maybe Verdana from that app. Plus modern Adobe fonts like Myriad or Minion Pro. I suspect that legacy non-Unicode fonts will not work.
In Macromedia Freehand although a few more greek
fonts work, they either disappear or become scrambled
when I attempt to "Convert them to curves"!
I think Freehand is non-Uncode and probably needs the older fonts.
For problems with Adobe and Macromedia apps, you might also want to ask in their forums:
http://www.adobe.com/support/forums/main.html
http://www.macromedia.com/support/forums/

Using iMovie 7.1.4 on an iMac w/ Snow Leopard; HD video imported with a Firewire cable transfers fine, but audio arrives with major static; problem persists w/ different cameras

Using iMovie 7.1.4 on an iMac w/ Snow Leopard; HD video imported with a Firewire cable transfers fine, but audio arrives with major static; problem persists w/ different cameras & Firewire cables; source DV tape has no audfio static.

I forgot to write down my computer specs:
iMac 27 Mid 2011
2.7 GHz Intel Core i5
4 GB 1333 MHz DDR3
AMD Radeon HD 6770M 512 MB
OS X 10.9.2

New Problems in Tiger Classic (or iMac G5)

Hi folks,
I have the last version of Managing Your Money ever released and we have always been able to use it in Classic without any trouble at all. However, since we got Mac OS 10.4 (or maybe is was since we got the iMac G5; since they were nearly simultaneous, I'm not sure) MYM and/or Classic seems to display symptoms of a memory or other resource leak. That is, every window I open takes longer to open than the last one. Eventually, the program becomes practically unusable and I have to restart. If I keep using it without restarting, the iMac will eventually freeze and the force quit window won't even appear.
We have never had this problem on previous versions of OS X, nor on previous models of iMac (we've used OS X with classic on two different G3 iMacs and a G4 iMac).
Does anyone know of any differences that should be significant? Are there any Classic extensions that are known to have problems in Tiger or on G5 iMacs?
Sincere thanks,
Bill
iMac G5 20 inch Mac OS X (10.4.6)

I don't know MYM does it make no difference if you allocate more memory to it with file>Get Info>Memory, please?
My own G5 runs classic exactly as my older G4 does, and since my configuratin is hardly likely to match yours, what does that prove?
If it was my Mac, I'd copy the Classic System Folder, set the copy in Classic System Preference, set its Extension Manager Set to Mac OS (Base) then Restart Classic and reinstall MYM, which should now have nothing to interfere with it…

Upgrade CS6 Illustrator and Photoshop Problem

Hi hi,
When I tried to upgrade my CS 6 Illustrator and Photoshop through my Adobe Updater, I kept getting the following errors:
Adobe Illustrator CS6 Update (version 16.0.3)
Installation failed. Error Code: U44M1P7
Adobe Photoshop 13.0.2
Installation failed. Error Code: U44M1P7
Please advice on how to overcome the error.
Thanks,
just Q

Hi hi,
I've followed your manual downloading of patch installation, but error U44M2P7 occurs for both manually downloaded patch for Illustrator and Photoshop CS6 for Mac.
Please advise.
Thanks and Regards,just Q
Date: Fri, 14 Dec 2012 21:28:21 -0700
From: [email protected]
To: [email protected]
Subject: Upgrade CS6 Illustrator and Photoshop Problem
    Re: Upgrade CS6 Illustrator and Photoshop Problem
    created by Manish-Sharma in Downloading, Installing, Setting Up - View the full discussion
Follow the steps in the below Kb :- http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-upda tes-ccm.html
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4922932#4922932
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4922932#4922932
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4922932#4922932. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Adobe Captivate 8 projects published to HTML 5 shows major loading problems and stops

Adobe Captivate 8 projects published to HTML 5 cause major loading problems in most browsers(IE 11, Chrome v. 35.0, Firefox v. 31). Loading… (screen)
The view stops after a while and only the Loading… (icon) can be seen on the page.
Is this a known problem with Captivate projects published to html5 and is there a way to fix it? What is wrong?
Test the html5 version of this project at: http://kurs.dokker.no/captivate/
and see for yourself what happends.

I changed the Preferences/Project/Start and End Preloader % to 25 and published the projects again. The course: http://kurs.dokker.no/captivate/elev/
stopped like before on one of the first slides, loading… screen like before in IE11.
In Chrome v. 37.0 the course worked badly, would not run, sound missing and buttons not working.
In Firefox 31.0 the course worked to a degree even if the program was advising to use another browser for this content.
In Opera 23.0 sound was missing and else working as bad as IE.
All this testes is done on a PC using Windows 8 connected på internet via ethernet, download speed: 66.57.
I would like to use the HTML5-format since it has a cleaner view than swf-files that appear to be jagged, but there is a lot missing before Adobe Captivates html5 publish is where it needs to be. Her are the complete html5 course and here are the swf based course for comparison.

Major system problems, hanging up at startup.

I'm developing some major sytem problems with my G4 Mac. It all seemed to start with a jumping cursor and then a dying mouse. I could not get the Mac to startup with several trys. It wouldn't even start up off of my external drive. I would get the first four icons in the upper right hand corner of the screen and the it would hang. I tried all of the usual fixes- permissions, disk utiliy, Disk Warrior, zapping pram. I finally started unplugging external items and getting back to original Mac- switching the firewire port in the back of my Lacie external drive helped for awhile, but now I'm getting the jumping cursor again and fearing I'll get a hangup again. Any ideas on how I can solve this problem? If not, can you point me somewhere for instructions on how to reinstall the system software? I have already installed a clean system on my external drive. Once I reinstall all of my apps there, and get it running properly, can I move all of that to my internal HD somehow? My original system disks for this computer is Jaguar 10.2 if that helps.
Thanks for your help,
Dick Skover

Dick,
Some observations and notes.
Have you tried using a different mouse, or changing
the port it is plugged into?
Yes, I tried and am using a inexpensive Logitech optical mouse. The one that came with the computer seemed to get very eratic and then not work at all. I did try plugging into different ports and that didn't make a difference.
How did you upgrade from Jaguar 10.2.x to
Panther 10.3.9?
I upgraded the simplest way, I guess. I had read about more complex ways to do it at the time Panther came out, but also heard you could do a simple upgrade. I don't remember the exact steps I used. Boy, this is way more complex than my original Mac in 1984.
What size is your Hard Drive, and how much space is
available? I should say I have quite a few applications.
My HD is 75 Gig with 17 Gig available.
Is your installed RAM original or added?
Yes, it came installed when I purchased it: 1.5 Gig
In one post you wrote "My original system disks
for this computer is Jaguar 10.2..."
I heard something back when Panther came out that the fact I started with 10.2, didn't allow me to do certain things like archive and backup.
But in another, you wrote "Yes, my original
Panther disk and then updated everything via
Internet."
Please clarify.
When I decided to install a clean system on my external HD I just used my Panther 10.3 disk- I didn't go all the way back to 10.2
"Yes, Disk Warrior found some problems, I don't
know exactly what they were."
Were the errors corrected? Have you rerun Disk
Warrior, to see if they are indeed repaired?
Actually I ran DW today again on the internal HD and it came up with a couple of problems that it said it repaired. Should I keep running it until it doesn't indicate any problems?
A couple other things you can check.
Open System Preferences > Accounts > Your Account >
Startup Items.
Is there any item in there that you are not familiar
with, or did not put there yourself?
Yes I did try that- I had a repair person come in to help me. He did point that out and we deleted items that didn't need to be there. What he suggested did help for a week, but the problem came back. I called him again, but he said the only thing left to do was re-install.
From the Utilities folder, start Activity
Monitor.
Select Active Processes.
Watch for whatever process is hogging %CPU.
Yes he ran activity monitor also- there didn't seem to be programs hogging the processor although we deleted those that look familiar.
I also have a question about the title screems that pop up on start up. In the past I used to have several things being checked as it went through the process, now I get welcome to Macintosh and that's it. I seem to remember indications that Macaroni was running, but no longer see any of that. I do have Macjanitor also and thought that one of those automatically runs at startup?
I will run pseudo daily, weekly and monthly tasks now. Is this something that Macjanitor does, or should I run the maintenance scripts periodicaly?
ali b

10.4.9 - Major audio problems with digital audio

I have a Digital XMPCR radio with Edirol MA-20D Digital speakers
I now have major audio problems, the audio is garbled and doesn't sound as strong. Kinda like a FM radio in a car that is loosing signal when you are traveling.
I use this XMPCR for a couple of hours a day and had no problems this morning prior to installing the update.
I have a XMPCR that was modified for Toslink/Digital connection. I connect the XMPCR to my Mac Pro 2.66 with toslink cables and connect my Edirol MA-20D digital speakers with toslink cables. I use Amoeba's "LineIn" for audio pass through.
I thought it might me the FTDIUSBSerialDriver so I reinstalled it, did not fix the problem.
I also have a real bad "buzzing" sound going on in the background. When I quit JXM (the application for changing channels on the XMPCR), the "buzzing" goes away but I have a rapid ticking sound coming out of the speakers until I quit LineIn.
Anyone else have any problems with their digital audio input/outputs?

I dont use the digital XMPCR radio, but I use Digital Performer to record audio and MIDI and I use exclusively the Built-In Audio input and Output and everything is working fine after the 10.4.9 Upgrade.

Major iPhone Problem

Hello,
I'm having a major iPhone problem!!!
My phone crashed yesterday and wont turn back on or charge since then. It will start up with the apple logo and then the screen goes dark, will only stay on for about 30 secs. It's an original not jailbroken or anything like that. iTunes won't recognize it at all, I tired resetting it, hard resetting it, a different cord, basically everything and NOTHING works!
Please help! Thank you!

try doing a hard restart - hold home + power until the phone shuts down... then connect it to your puter.
you may have too many things running in the background on the phone... i have heard fetch & push can drain your battery like you experienced... i don't use them, i get my mail when i open the application.

After Int Install OS10.5.8 on PowerPC G4 having major system problems (created user to verify) CS4 apps go non responsive

After Int Install OS10.5.8 on PowerPC G4 having major system problems (created user to verify) CS4 apps go non responsive

Ok no difference, I don't get any drive errors that seem significant or numerous, sometimes I don't get any at all, the disk always verifies and I haven't had to run a repair on it yet. I've gotton one or two drive errors, I'll save them next time I run either DU or DW.... however with permissions, there are a lot and they all fix (except: see below: Last 3: ACL errors are always there) but as I keep having to do force quits and system re boots they keep coming back; posted them below IDK if this will help you to help me, LOL... but figured it couldn't hurt, the ones below are re-occuring I know i've seen them b4. . . Don't know if this makes a difference but on initial install I had several font conflicts w/system fonts, I renamed suitcases and that error message hasn't come back . . . but do you think this could be a font issue . . . I have like 12,000 fonts of which a couple hundred are ususally always active . . . IDK it doesn't make sense to me it would be, but you never know... just a shot in the dark
I also saved my last PS crash report and it was like 100 Pages long, I've never seen one that long, I make a pdf of it and post link to my idisk, if its something that you can interpet.
Verify permissions for “Rayce”
          Reading permissions database.
          Reading the permissions database can take several minutes.
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
ACL found but not expected on "Applications/Utilities".
ACL found but not expected on "Applications".
ACL found but not expected on "Library".
Permissions verification complete
Repairing permissions for “Rayce”
          Reading permissions database.
          Reading the permissions database can take several minutes.
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
ACL found but not expected on "Applications/Utilities".
ACL found but not expected on "Applications".
ACL found but not expected on "Library".
Permissions repair complete

MAJOR EXPORT PROBLEMS! PLEASE HELP!

Hello. I hope everyone had a nice holiday. I'll try to be brief. I'm having a horrible problem with exporting my films. I work on a PC. To me, that shouldn't matter, but here's what's been happening. I shoot my films at 23.976 frames on the 5DMII and the 7D. My film got into a film festival. They asked for a 720p mp4 file. OK, no problem. I went under H.264, I exported an HD File, with 23.976 frame rate and I checked both boxes for Max Render and I set a 2-pass. I exported and when I played the vid back through Windows Media Player, it felt fine.
BUT, at the festival this past weekend, I was horrified to discover that my film, and no other films, was having a major sound problem. The audio was about half a second ahead of the footage, so they kind of looked like they were speaking correctly, but their dialogue would finish right before their mouths would. Super embarrassing. All I noted when I saw the tech booth was that they were using a mac laptop hooked to the projector, so I assume maybe it was quicktime they were running? Also, I believe they put all of the vids together as one file so it would run together as one block, but still, I believe most of the other films were shot at 23.976 frames as well, so that shouldn't matter.
I went home, thinking maybe I just wasn't being diligent enough and I needed to really look at the sound. Maybe it was off. But I keep all of the temp tracks, the sound from the dslr, on track 1 and then just mute it. I unmuted and played both tracks, and there's no difference. No echo, no weird delays, they're both perfectly synched up.
I've been having this problem for a long time but this was the first time that I REALLY could see the problem, probably because it was on such a big screen. Just my opinion, but I've found that most festivals are running MAC software and it seems like the vids I export seem to have an audio problem being played through mac programs. Another instance, briefly. I did a screening for a feature I edited. I exported an HD mp4 and put it on a friends MAC. The sound was off when we pre-screened it. I have a PC Toshiba laptop, I ran the vid through windows media player, and it felt much better, so we screened using my laptop and it went fine. But what does that mean?
Has anyone else had this problem? It's not just festivals too. I have a subscription with Vimeo, but every short film that I put up there has some kind of an audio drift problem. It's always minor so some people see it and some people don't, but I'm certain the vids are fine on my timeline. Do I need to export using something else? A different setting? As a quicktime vid? That last question seems kooky since any tutorial I've seen is usually wanting h.264, so I just don't know.
Please let me know if there's anything I can try or if you just have an opinion. Thanks very much.

im sorry i cant seem to start a new topic PLEASE HEEEEEEEEEEEEEEEEEELLLLLLLLLLPPPPPPPPPPPPP
all of a sudden about half an hr ago my computer froze & went all spastic. i retsarted & now ALL MY SONGS ARE GONE FROM MY IPOD!!! I HAD 10 000+ SONGS HOW DO I GET THEM BACK!?!?!??
please tell me theres a way. when i check the ipod itself it says 0 songs 0 videos but strangely my 87 photos are still on there. also when i reconnect it to the computer it says to restore its factory settings but when i go to update/restoe it says i have 10GB left (its a 60Gb video ipod) so i think the songs are still stored there but i cant access them or something please help me!!

3.1 update, major audio problems!

so i updated to 3.1 today and just noticed some major audio problems:
1. when I answer a phone call I can't hear anything through the ear piece, but the caller can hear me. i can only hear them when I put them on speaker. same thing with voicemail.
2. the ringer works when I get a call, but text, voicemail and email chimes/tones aren't audible at all.
3. the built in speaker no longer works when playing iTunes music, YouTube, or games. i can only hear audio when plugging in headphones.
all my settings are the same as before the update, but despite adjusting the volume controls/rocker none of the audio settings are working properly. i also reset/restarted the phone (home + sleep buttons) a few times, but no use. what the he'll is going on?
Message was edited by: d.c.1

I've got the same thing- from the speakers, no ring tone, games don't have speaker audio, no email or text audio-- except with the earphones. iTunes music plays thru the speakers but not games or afore-mentioned items. l've never had a problem before. also reset and restored- still the same.

Major Reconnection Problems

Hey all,
An editor just emailed me the project file of a rough cut for a feature we're both working on, and I've been having pretty major reconnection problems. Despite the fact that we're working with exactly the same files on two identical drives, when I try to reconnect all the media I get the message:
+"The file does not have proper content to reconnect to "(clip name)" at time (timecode) in sequence "(sequence name".+
+Click "OK" to make this item independent and go to the next clip or "Cancel" to skip all clips from this file."+
When I click "OK" (which I have to do 200 times, as this problem reoccurs over and over with many different clips at many different points in time), it eventually reconnects.
However, though it appears that the clips have all successfully reconnected, the sync for the entire project is almost completely off. Sometimes it reconnects to the wrong part of the correct audio clip, sometimes it substitutes the incorrect clip altogether.
Does anyone have any idea how to solve this problem? It's been driving me crazy for weeks.

Stumbled upon these problems today. Final Cut Pro did not way want to reconnect the media to the capture scratch files. Only thing I did was I moved them to another drive.
What solved the problem: rename all scratch files by adding the extension '.mov'. Confirm they are now decent quicktime movies.
You might want to learn the single unix terminal command to do this for the entire batch at once.

Problems installing Tiger on G3

I am having troubles installing OS X (10.4) on our G3 Desktop (Blue and White). The G3 has almost all original hardware, including built on firewire. Things added were a DVD Drive from a G4. It meets all the required specs for Tiger. It has all the latest updates and firmware upgrades. And the version I am trying to install is a generic OS X Tiger Installation Disk, for multiple computers.
When inserting the DVD on bootup, the display never comes out of powersave mode. If I start the system without the DVD in the drive, it boots into OS 9.2.2 just fine. Then if I insert the disc it pulls up the contents, I click on the installer and it says click Restart to begin the installation. Again it tries to boot but nothing ever shows up on the screen. I can hear the DVD drive spinning up about 30 seconds after restart, but nothing ever happens.
I've tried holding 'C', I've tried selecting it as a startup disk from within OS 9. I've even tried to install over the network, but everytime it tries to bootup the installation, the screen never gets a signal.
If you can please give me some suggestions I would really appreciate it!
G3 Desktop Mac OS 9.2.x

Hello there...i have a problem installing tiger 10.4.6 ....cd boots ok and all; and it starts installing and all..... but at the very end it gives me this "there were errors please try to install again" (and of course i tried like 1000 times....actually 1001)the software is original and the computer meets the minimum requirements....now ...do i need to go ahead and install the very first os x and then this one? and how do i use the Diagnostic at boot up? (i'm new at Mac and don't know much) any help would be Highly appreciated...Best of Luck everybody!!!

Major Photoshop problem in Tiger

Similar Messages

Maybe you are looking for