MAJOR PROBLEMS WITH IPHONE 3G AND MICROSOFT EXCHANGE!!!! PLEASE HELP!!!!

Ok,
My exchange server at work was synced to my iphone and has worked with no issues. I then exchanged my phone because there were issues with my bluetooth not syncing properly. So with this new phone, it prompts me to enter in my exchange server password every few days. I contacted my IT department as well and microsoft to get this issue resolved because I assume that there were issues with the exchange server. They were both able to see an event viewer and it showed that my iphone was attempting to log in numerous amounts of times, which locks out my account after 3 incorrect log ins. Even when I erased the exchange account from my phone, it still showed that the phone in the event viewer was trying to log in over and over again. I then did a master clear and restore and the process was removed in the event viewer. So then I called my IT department to unlock my account after I cleared everything. I was able to sync everything again with it working properly. Now its a day later and the my exchanger server prompts me to enter in the password AGAIN and my exchange account is locked AGAIN because the event viewer at work is showing the same issues. Is my Iphone not saving the password correctly? What do I do? My IT department even created a dummy account to see if a new account would fix the issues but yet no cigar! HELP!!

The iPhone you returned is still syncing against your server and locking out your account. Someone possibly has access to your mail data. I'd recommend having your Exchange Administrator install the Microsoft Exchange Server ActiveSync Web Administration Tool (http://www.microsoft.com/downloads/details.aspx?FamilyID=E6851D23-D145-4DBF-A2CC -E0B4C6301453&displaylang=en) and attempt to wipe/delete/block that other iPhone.
Message was edited by: ethanm

Similar Messages

  • Major Problems WIth Iphone 3G and Quality is not very good please help?

    ok everyone this month i bought an iphone 3G and have experienced lots of problems,dropped calls phone turns off by itself for no reason and restarts,sometimes phone will be locked and music controls will show on the screen,i do have a dead pixel on the screen also, screen does not seem level like its not even or something, lock unlock button on top is uneven,i had the original iphone and it was built with quality this phone ***** really bad, well i made an appointment with a macgenuis to replace the phone, but today i accidently dropped it and no there is a two scratches in each corner and there seems to be a small gap between the screen and the metal on one side, this phone is really cheap quality, what i wanted to know if apple will still exchange the phone under warranty or now will they question it becuase i dropped it, but its not fair becuase the problem was before i dropped it and it was horrible and also i turn off 3G becuase sometimes i hear myself echoing and not the other person and sometimes also i hear a crackling noise.... please help what should i do
    Message was edited by: dreydey

    This is a user to user help forum only so no one here can answer regarding what AppleCare or an Apple Store will do in this situation. Every warranty claim is on a case by case basis. If a fellow user tells you - sure Apple will exchange your iPhone and Apple doesn't exchange it due to the accidental damage, what you are told here carries no weight in this regard.

  • Having problems with HP6980 printer and Windows 7, please help

    I just replaced my XP computer with a new HP computer running Windows 7.  Each time I turn on my HP 6980 printer, it won't print.  When I go to Devices and Printers, I see that it is offline.  I have to delete the printer and reinstall it to make it work and this solution is only good for the session.  I have to repeat the process each time that I turn on the computer.  Please help.

    Try running this next time you get the issue:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-91788-1&lc=en&dlc=en&cc=us&...
    This should fix the offline issue instead of reinstalling.
    I work for HP but my posts and replies are my own thoughts.
    If I have solved your issue, please feel free to provide kudos
    Make it easier for other people to find solutions, by marking my answer with Accept as Solution if it solves your issue.

  • Is there a fix for the connectivity problems with iPhone 5S and ISO 7.0.2?

    Is there a fix for the bluetooth connectivity problems with iPhone 5S and ISO 7.0.4?
    I am having problems connecting the BT Audio and the handsfree phone connectyion is unreliable in 2012 Mitsubishi Lancer XL.
    All worked OK with ISO 6.

    Hello CraigNicholson
    You would need to sync with iTunes to get that process to work for you. Check out the article below for more information on how to resolve that issue to get the proper token to use Push Notifications again.
    iPad and iPod touch: Unable to use YouTube or Push notifications
    http://support.apple.com/kb/ts3305
    Regards,
    -Norm G.

  • Hello, i have a problem with this number code  213:19,  please help me!

    Hello, i have a problem with this number code  213:19,  please help me!

    dan
    What version of Premiere Elements and on what computer operating system is it running?
    If you are using Premiere Elements 13, have you updated it to 13.1 yet? If not, please do so using an opened project's Help Menu/Updates.
    What type of user account are you using....local administrator or domain type?
    Please review the following Adobe document on the 213.19 issue. Have you read that already?
    Error 213:19 | Problem has occurred with the licensing of this product
    ATR

  • Non iCloud contact sync not working with iPhone 4S and Microsoft Windows/Outlook

    Trying to sync contacts without success! Have iPhone 4S and Microsoft Windows, not using iCloud.  I've gone through the Info route and told it to sync but the data doesn't transfer.  Any idea why?

    what version of Outlook are you using. I know right now its not compatible with Outlook 2013.

  • Access Connection​s Problems With Windows 7 and Microsoft Security Essentials

    There appears to be a conflict with Access Connections and Microsoft Security Essentials which causes Microsoft Security Essentials to generate high page faults and high CPU usage, and prevents normal operation of Access Connections.
    After fresh install and reboot Access Connections would not launch, and when cursor was moved to the taskbar, the cursor pointer changed to a spinning loop.  Clicking on the Access Connections gadget did nothing. Looking at Task Manager, Microsoft Security Essentials program msmpeng.exe was experiencing 5000+ page faults per interval.  Terminating msmpeng.exe immediately caused Access Connections to launch.
    System configuration: Lenovo Thinkpad x200s with Windows 7 Ultimate 64 RTM (installed with a fresh install) with all current updates, and all updates from Leovo including Access Connections V 5,42 Build 6JC725WW,
    Solved!
    Go to Solution.

    Here is a workaround to fix the issue
    1) Launch MS Security Essentials
    2) Click on the "settings" tab
    3) Click on "Excluded files & Locations"
    4) Click "Add"
    5) browse and add the following exceptions
     a) C:\Users\Public\Lenovo\Access connections
     b) C:\Users\Public\Lenovo\Access connections\AccConnAdvanced.html
    6) Click "Save Changes"
    The issue is also resolved in AC 5.5 which is posted to the web
    http://www-307.ibm.com/pc/support/site.wss/documen​t.do?lndocid=MIGR-73682
    Can someone please test both solutions and let me know if the issue is resolved.
    Thanks

  • Hello I put protection on your iphone 4 and forgot about please help, Hello I put protection on your iphone 4 and forgot about please help

    Hello I put protection on your iphone 4 and forgot about please help

    If you forgot your passcode, read here: http://support.apple.com/kb/HT1212
    If you've forgotten your Apple ID and/or password, read here: http://support.apple.com/kb/HT5787
    If neither of those helps, let us know. Please tell us exactly what you see on your iPhone's screen, including the exact message displayed.
    ~Lyssa

  • Problems sending emails with iPhone 3G and outlook exchange

    I have a problem sending email with exchange. Receiving and answering mail works fine and calender updates work fine. However when I initiate an email from the phone it syncs and ends up in the sent folder in the computer but never reaches the recipient. I have tried this many times with different recipients and phones. It only happens from my iphone and ipad. Any suggestions?
    Any help much appreciated

    The iPhone you returned is still syncing against your server and locking out your account. Someone possibly has access to your mail data. I'd recommend having your Exchange Administrator install the Microsoft Exchange Server ActiveSync Web Administration Tool (http://www.microsoft.com/downloads/details.aspx?FamilyID=E6851D23-D145-4DBF-A2CC -E0B4C6301453&displaylang=en) and attempt to wipe/delete/block that other iPhone.
    Message was edited by: ethanm

  • When will apple fix the bending problem with iPhone 6 and 6 ?

    Does anybody know when new batches of the iphone 6 and 6 plus ,without the bending problem (bendgate), will be released ? I wanted to buy the iphone 6 but id rather wait till they fix the bending problem.

    theatreus wrote:
    I would like to calmly and rationally talk for a moment. On the internet and with people so invested in a company's products that can be hard to do. I find it very irritating reading people saying it is a hoax while I'm sitting here with a bent plus myself. First off, most people don't take major mainstream news companies seriously anymore. So CNNMoney isn't where anyone needs to be researching. However there are multiple other people who demonstrate this problem. So check YouTube and remember you'll find what you search for. So, if you search for iPhone 6 plus doesn't bend you'll find videos of people trying to prove it doesn't bend. It is getting ridiculous, XBOX VS PLAYSTATION, Creationists vs Evolutionists, iPhone vs Android. Seriously, I have a friend with an HTC One M8 and another friend who just got the regular iPhone 6. I told the guys about the reasoning behind the bend. "All aluminum bodied phones do it" my iPhone friends says yep that's true and my HTC friend comes over and asks me to bend his phone. I said no at first because i was afraid i might actually break it... He never put a case on his phone btw... He talked me into it and I couldn't bend it at my full force i barely saw it arch. After much more research I found out why that might be. THE ONE THING APPLE KEEPS PUTTING OFF. The screen on high end Android devices is Gorilla glass very hard to break and hard to bend. Maybe it is time I go back to Android. Logically they have better phones when you don't think about if its Apple or Android. Well I am sure I will get hate messages and grammer corrections and really intelligent comebacks but I don't care honestly.
    <Personal Information Edited by Host>
    Prove you have a bent Plus.  Post a picture, but be advised, I work for a technology company and if you post a picture of a bent phone that can be easily found through Google, I'll report you.

  • Problems with iPhone 4 and 3G

    Hi,
    since iOS 5 I am faced with severe software problems, software freezes and system crashes. Lately I am facing problems to call without openining a specific setting before calling. Ditto the iPhone has problems to connect to the internet, but it can not be the SIM card as the card is working without problems in other devices. I have reset the device and installed a backup - no changes. Maybe a pure rest will do, but I am not really happy about starting to set up everything from scratch.
    Does anyone have similar problems and/or a solution?
    Thanks.

    One of the issues that we have had since the latest upgrade (4.2.1) is with the radio function in general (both wifi and bluetooth). We have identified that the wifi security protocol stack has serious issues with key length and this can stop connections to the wifi systems such as TC and APE, but it also affects anyone using security string longer than 8 characters.
    With bluetooth we noticed that the older pairing sequence was no longer working. The only way that we could clear this down was by deleting all pairing done earlier in both devices, resetting the network settings and then restarting the 'phone. Place the vehicle/headset/device into pairing mode AFTER the iPhone has completely restarted. Go into the GENERAL-BLUETOOTH settings and pair the device again, this should be all you need to do.
    One thing to note is that some of the older bluetooth devices only support v1 of the bluetooth protocol stack and this causes trouble with the new update (don't know why yet but it looks like a handshake problem).
    Finally - for BMW owners, the bluetooth stack in 4.2.1 can cause intermittent drop-outs if the car software has not been updated recently (prior to Jan 2010). If you need to pair your iPhone 4 or upgraded 3GS, you may need to take your car to a dealer to update the comms package to he latest version. The snap-in for the iPhone 4 is due from Jan 2011.
    Hope this helps.

  • Database connectivity toolkit problem with WINDOWS VISTA and Microsoft jet 4.0 provider

    Hi again,
    I'm experiencing a problem with Database connectivity toolkit and Microsoft Jet 4.0 provider (MS ACCESS mdb database).
    I was able to get my application to work properly on my PC: WINDOWS XP PROFESSIONAL, VERSION 2002, SERVICE PACK 3 and Msjet40.dll ver. 4.0.9511.0 (Windows XP SP3 and Security Bullettin MS08-028).
    The same connectivity toolkit seems to have problems (although I didn't get any error dialog) on a laptop with WINDOWS VISTA ULTIMATE, SERVICE PACK 2 and Msjet40.dll ver. 4.0.9755.0.
    Does anyone have an idea whether it is a sort of compatibility issue or a different thing?
    Would it be possible to include my DLLs into the installer in such a way LabVIEW application calls those DLLs instead of the ones it finds on the host PC?
    Thanks a lot. Any suggestion or advice very welcome and appreciated.

    I ran into this with Windows7 64 but, could not get the jet 4.0 to work.  Endnd up dumping access and used sql server express, its free, and all my code worked fine, just used a different UDL to connect.  I wasted lots of time trying to find a way of getting the jet4.0 to work with 64bit windows.
    Paul Falkenstein
    Coleman Technologies Inc.
    CLA, CPI, AIA-Vision
    Labview 4.0- 2013, RT, Vision, FPGA

  • Problems with IPhone 4S and pop email

    Hi
    I'd be very grateful if someone here is able to help me
    I recently bought an IPhone 4S and am having problems with the two pop email accounts I need to put on it.
    When I use these settings below (sent to me by my web hosting company) I get the message
    The POP server "mail.myemailaddress.com" is not responding. Check your network connection and that you entered the correct information in the "Incoming Mail Server" field
    When I try and send out emails I get the message
    Cannot Send Mail
    The connection to the outgoing server "smtp.myemailaddress.com" failed
    I've also had the message
    CANNOT SEND MAIL
    a copy has been placed in your outbox. The recipient (email address) was rejected by the server because it does not allow relaying.
    Settings I've put in are
    Pop Account
    Incoming mail server
    Host name  mail.myemailaddress
    User name  my email address
    Password    my password
    Outgoing
    SMTP smtp.myemailaddress
    Advanced
    Use SSL off
    authentication - password
    server port 25
    I've also tried using port 26, port 110 and port 995 with SSL enabled and no luck with any of them
    I've contacted my web hosting comapny but they can't help so anyting suggested here will be very gratefully received

    Some folks think the problem is due to poor solder connections of the WiFi chip on the card. Heating may expand the joints to cause temporary connectivity. The chip itself could be of low tolerance, and the iOS update causes it to fail the threshold. If you have tried the software resets, then the cure is to reflow the solder of the chip to the WiFi card, or to replace the WiFi card. Apple will not "own" this problem, even though it seems to be widespread. Apple offers to renew your contract for a new iPhone at $199. Certain repair shops will tackle this problem, although many local shops will not. In the US try iFix Miami Beach. See them on eBay <http://www.ebay.com/itm/iPhone-4S-Grayed-Out-Wifi-Wireless-Fix-Repair-Service-Tr usted-Specialists-/161160765436?ssPageName=ADME:L:OU:US:1120> for a $69 fix. They fixed my iPhone 4S and returned within a week (even over the Memorial Day holiday weekend). In Europe, I have read about, but have not tried PodMod <http://www.podmod.org>

  • Problems with iPhone 5 and IOS 7

    Since yesterday my iPHone 5 has been turning off and would only turn back on when I connect it to the charger. It has been doing that since this morning which lead me to restore the phone. First I tried restoring it to my latest backup and that didn't work. Then I tried restoring it as a new phone, which some what worked, but it is not allowing the backup to restore my data & information or do anything. I started logging back in to all of my apps or use my iPhone but the phone keeps rebooting itself. Now the I am dealing with the phone turning off on its own and will only turn back on when I connect it to the charger except it is not turning back on completely. Now my phone will only turn on to the white screen with the apple logo, go black, and repeat. Should I just give it a day and allow Apple to fix the problem or had anyone found a solution that actually works. Has anyone gone to the Apple Store to receive help and was there any success in to fixing the problem? I hope this is not some April fools joke.

    Hello Alexander G92.
    The following Knowledge Base article provides some great steps for troubleshooting both issues you're describing:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Since it seems the white screen is the most current issue, these steps will help:
    Display shows a white screen
    Try turning iPhone off and then on again.
    If the iPhone will not turn off, try to reset it.
    If that doesn't work, try restoring the device.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    If that issue is resolved and the phone continues to require you to connect it to power to function:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • C7 problem with OVI suite and Outlook exchange 200...

    Hello,
      I'm now own a NOKIA C7 and need to switch to OVI suite, PC suite is not supported for this  handy. OVI suite is not synchronizing my contacts from exchange to my C7.
    With my old N73 and PC suite I did not have the problem on my DELL M4400 notebook.
    What I've found out, in case of using a USB cable connected nothing was able to synchronize,
    no contacts, calendar and Notes. The OVI suite did nothing for 15 minutes, only searching for somewhat.
    Crazy is, in case of using a Bluetooth connection (removed the USB connection), it was possible to synchronize the calendar and Notes, but contacts were still not possible, some issue as before.
    We verified this problem, using a NOKIA N8 from a colleague - exactly same happened.
    I was happy to have at least the calendar synchronized, because I need this for my job.
    Nevertheless the contact synchronization issue need to be fixed...
    I've bought the C7 with symbian, because I expected no problems in compare to other available Handy Companies and now this...
    My personnel opinion, the OVI suite is currently not was the people expecting - support for consumer people and flexible for business people. For me PC suite was much more, what I need.
    Now, I'm waiting for support to fix my problem...
    Best regards,
    Onecent59
    Solved!
    Go to Solution.

    Hello Joyfeal,
    Hello Joyfeal,
    I never had problems with my old N73, using PC suite - this worked well over years.
    Hello Joyfeal,
    I never had problems with my old N73, using PC suite - this worked well over years.
    I did, what you proposed. Completly uninstall all. Afterwards, I did a registry cleaning and program files cleaning, so nothing from th e PC suite and Ovi Suite was longer on my Notebook.
    Next step was reinstalling OVI suite, including cable and BT driver - this was resulting nearly the same - advantage was only, that I can now use BT and USB to update Calender, tasks and notes.
    Hello Joyfeal,
    I never had problems with my old N73, using PC suite - this worked well over years.
    I did, what you proposed. Completly uninstall all. Afterwards, I did a registry cleaning and program files cleaning, so nothing from th e PC suite and Ovi Suite was longer on my Notebook.
    Next step was reinstalling OVI suite, including cable and BT driver - this was resulting nearly the same - advantage was only, that I can now use BT and USB to update Calender, tasks and notes.
    Strange is, that when I try to sync the CONTACT data, and I let first searching for Outlook folder, it takes about 4 minutes, it finds the right folder, I click and mark this, but then OVI suite is not longer remember the selection (so it seems for me to be) and try succesless to sync the CONTACTs.
    Hello Joyfeal,
    I never had problems with my old N73, using PC suite - this worked well over years.
    I did, what you proposed. Completly uninstall all. Afterwards, I did a registry cleaning and program files cleaning, so nothing from th e PC suite and Ovi Suite was longer on my Notebook.
    Next step was reinstalling OVI suite, including cable and BT driver - this was resulting nearly the same - advantage was only, that I can now use BT and USB to update Calender, tasks and notes.
    Strange is, that when I try to sync the CONTACT data, and I let first searching for Outlook folder, it takes about 4 minutes, it finds the right folder, I click and mark this, but then OVI suite is not longer remember the selection (so it seems for me to be) and try succesless to sync the CONTACTs.
    I've tried so much - no success. I've a lot experience in software - but no idea, what I can try out more. I guess, there must something be with Outlook 2007 and Exchange server usage, which worked with PC suite.
    Hello Joyfeal,
    I never had problems with my old N73, using PC suite - this worked well over years.
    I did, what you proposed. Completly uninstall all. Afterwards, I did a registry cleaning and program files cleaning, so nothing from th e PC suite and Ovi Suite was longer on my Notebook.
    Next step was reinstalling OVI suite, including cable and BT driver - this was resulting nearly the same - advantage was only, that I can now use BT and USB to update Calender, tasks and notes.
    Strange is, that when I try to sync the CONTACT data, and I let first searching for Outlook folder, it takes about 4 minutes, it finds the right folder, I click and mark this, but then OVI suite is not longer remember the selection (so it seems for me to be) and try succesless to sync the CONTACTs.
    I've tried so much - no success. I've a lot experience in software - but no idea, what I can try out more. I guess, there must something be with Outlook 2007 and Exchange server usage, which worked with PC suite.
    I've talked with a few guys in my company (R&D area) and all told me, that they like the new N8 and C7-00, but they hate the OVI suite - it´s designed for kids and hobby user, but not for professional usage - my opinion is, that PC suite was much clear in use. OVI suite has some feature I like, but I expect to have such kind of problems fixed. The C7-00 is not a cheap handy, so I can expect this.
    Hello Joyfeal,
    I never had problems with my old N73, using PC suite - this worked well over years.
    I did, what you proposed. Completly uninstall all. Afterwards, I did a registry cleaning and program files cleaning, so nothing from th e PC suite and Ovi Suite was longer on my Notebook.
    Next step was reinstalling OVI suite, including cable and BT driver - this was resulting nearly the same - advantage was only, that I can now use BT and USB to update Calender, tasks and notes.
    Strange is, that when I try to sync the CONTACT data, and I let first searching for Outlook folder, it takes about 4 minutes, it finds the right folder, I click and mark this, but then OVI suite is not longer remember the selection (so it seems for me to be) and try succesless to sync the CONTACTs.
    I've tried so much - no success. I've a lot experience in software - but no idea, what I can try out more. I guess, there must something be with Outlook 2007 and Exchange server usage, which worked with PC suite.
    I've talked with a few guys in my company (R&D area) and all told me, that they like the new N8 and C7-00, but they hate the OVI suite - it´s designed for kids and hobby user, but not for professional usage - my opinion is, that PC suite was much clear in use. OVI suite has some feature I like, but I expect to have such kind of problems fixed. The C7-00 is not a cheap handy, so I can expect this.
    ...now I wait for help or software update...
    Hello Joyfeal,
    I never had problems with my old N73, using PC suite - this worked well over years.
    I did, what you proposed. Completly uninstall all. Afterwards, I did a registry cleaning and program files cleaning, so nothing from th e PC suite and Ovi Suite was longer on my Notebook.
    Next step was reinstalling OVI suite, including cable and BT driver - this was resulting nearly the same - advantage was only, that I can now use BT and USB to update Calender, tasks and notes.
    Strange is, that when I try to sync the CONTACT data, and I let first searching for Outlook folder, it takes about 4 minutes, it finds the right folder, I click and mark this, but then OVI suite is not longer remember the selection (so it seems for me to be) and try succesless to sync the CONTACTs.
    I've tried so much - no success. I've a lot experience in software - but no idea, what I can try out more. I guess, there must something be with Outlook 2007 and Exchange server usage, which worked with PC suite.
    I've talked with a few guys in my company (R&D area) and all told me, that they like the new N8 and C7-00, but they hate the OVI suite - it´s designed for kids and hobby user, but not for professional usage - my opinion is, that PC suite was much clear in use. OVI suite has some feature I like, but I expect to have such kind of problems fixed. The C7-00 is not a cheap handy, so I can expect this.
    ...now I wait for help or software update...
    Regards,
    OneCent59
    Hello Joyfeal,
    I never had problems with my old N73, using PC suite - this worked well over years.
    I did, what you proposed. Completly uninstall all. Afterwards, I did a registry cleaning and program files cleaning, so nothing from th e PC suite and Ovi Suite was longer on my Notebook.
    Next step was reinstalling OVI suite, including cable and BT driver - this was resulting nearly the same - advantage was only, that I can now use BT and USB to update Calender, tasks and notes.
    Strange is, that when I try to sync the CONTACT data, and I let first searching for Outlook folder, it takes about 4 minutes, it finds the right folder, I click and mark this, but then OVI suite is not longer remember the selection (so it seems for me to be) and try succesless to sync the CONTACTs.
    I've tried so much - no success. I've a lot experience in software - but no idea, what I can try out more. I guess, there must something be with Outlook 2007 and Exchange server usage, which worked with PC suite.
    I've talked with a few guys in my company (R&D area) and all told me, that they like the new N8 and C7-00, but they hate the OVI suite - it´s designed for kids and hobby user, but not for professional usage - my opinion is, that PC suite was much clear in use. OVI suite has some feature I like, but I expect to have such kind of problems fixed. The C7-00 is not a cheap handy, so I can expect this.
    ...now I wait for help or software update...
    Regards,
    OneCent59
    Hello Joyfeal,
    I never had problems with my old N73, using PC suite - this worked well over years.
    I did, what you proposed. Completly uninstall all. Afterwards, I did a registry cleaning and program files cleaning, so nothing from th e PC suite and Ovi Suite was longer on my Notebook.
    Next step was reinstalling OVI suite, including cable and BT driver - this was resulting nearly the same - advantage was only, that I can now use BT and USB to update Calender, tasks and notes.
    Strange is, that when I try to sync the CONTACT data, and I let first searching for Outlook folder, it takes about 4 minutes, it finds the right folder, I click and mark this, but then OVI suite is not longer remember the selection (so it seems for me to be) and try succesless to sync the CONTACTs.
    I've tried so much - no success. I've a lot experience in software - but no idea, what I can try out more. I guess, there must something be with Outlook 2007 and Exchange server usage, which worked with PC suite.
    I've talked with a few guys in my company (R&D area) and all told me, that they like the new N8 and C7-00, but they hate the OVI suite - it´s designed for kids and hobby user, but not for professional usage - my opinion is, that PC suite was much clear in use. OVI suite has some feature I like, but I expect to have such kind of problems fixed. The C7-00 is not a cheap handy, so I can expect this.
    ...now I wait for help or software update...
    Regards,
    OneCent59

Maybe you are looking for

  • Problem with inserting a row in the current table

    I am working on Html editor using swings. actually i am trying to insert a row using private void insertTableRow(int cols)           StringBuffer sRow = new StringBuffer();           sRow.append("<TR>");           for(int i = 0; i < cols; i++)       

  • Built in iSight - what else does it work with

    I know that the built in isight will work with imovie, photobooth and ichat but what is the best way to use the isight with msn? thank taylor ive got a new macbook pro coming on wednesday

  • Preview of CR2 raw files on import window from camera

    Hi I have this problem with my Canon XTI. When I connect the camera to the computer and open the import dialog window, I can not see the previews of my CR2 raw files. But if I copy the CR2 files to he hard disk and try tho import from it, then previe

  • Where should i put html with applet class embedded?thanks

    Tomcat4.0 server i put html and applet class in the root of my project(/webapps/test/) when i hit the html file locally, it displays well. but it doesn't work when it comes to service. plus:the applet class is developed with jdk1.1.8 any help is appr

  • Warning Msg - While checking Mulitproviders

    Hi Frds, When i am trying the check the mulitproviders, we are getting warning msg. Below is the warning msg which we getting. Error messages from point of view of OLAP processor: Message no. R7I127 Now we have upgrade our patch level from 16 to 21.