Major Receiver Problems- HELP!
I got my first Nike Plus kit for my 2nd Generation Nano. I loved it the two runs that it worked then it would not recognize the receiver. I ordered a new kit and still had the same problem so I ordered a brand new Nano. It worked for a couple of runs and then would not recognize the receiver again. I ordered a 3rd kit which worked fine for about 40 miles and today it will not recognize the receiver again. I really, really want this technology to work because I love it but I am really getting frustrated since I am on my 2nd Nano and 3rd kit. I am not rough with gear. Could I just be the most unlucky person in the world that keeps buying defective equipment? Any advice would be very helpful.
I have has really major problems this week as well. I use a 3rd gen nano and for 10 runs my sport kit worked really well. I did a 5k race on Sunday and the ipod could not find my sensor. I played around with it and got it work after about 10 attempts (after my race, of course). I thought I was all set when I went on my run today. It was working fine, then I looked down at my ipod and it said I had only run .3 miles when I gone over one mile. I started a new workout and it did the same thing twenty minutes later. Then it could not find the sensor. I am really excited about this product and want it to work. The support hotline was closed after my run. I hope they send me a new one and that works well.
Similar Messages
-
Exchange 2013 - Mail receive problem -Help!
Exchange 2013 SP1 -fresh install -test environment with one test mailbox setup in addition to the Administrator account. Using default Receive Connectors and it is set for Anonymous. Using OWA and Outlook 2010 for testing.
We can send/receive mail INTERNALLY in both Outlook & OWA between our test user and the Administrator user.
We can send mail externally from both accounts.
We are not receiving mail into the Inbox of either OWA or Outlook.
We are not seeing any authentication issues with Outlook -always shows connected to Exchange. But if we have same problem in OWA then we are just testing with it for now.
We ran the Microsoft Connectivity Analyzer for both Inbound and Outbound SMTP and it passed with no errors/warnings L
We did NSLOOKUP, from a Command prompt at the server wtith this result -not sure why it shows server as unknown?:Thank you for replying. Yes the mailbox is at Time Warner and I can use their webmail interface and see the messages I sent to the test user are there.
No, our domain name is companyname.com (if you need the actual name..I am not sure if I should send it to you?) and we use
[email protected] for email.
Our external A records and MX records are at Network solutions and that is posted here-- but decided to start another thread with more concise information as I learned of it:
http://social.technet.microsoft.com/Forums/office/en-US/0b18e928-0207-4ab9-bc12-c00a75088bdc/new-deployment-outlook-can-send-but-not-receiving-messages?forum=exchangesvrsecuremessaging
When I do NSLOOKUP of our domain I get just the two MX records at Time Warner. Not anything with our actual domain name for email in it. I just added the A records for mail.companyname.com and autodiscover at Network Solutions yesterday...but though those
were only for use externally for OWA, ActiveSync, etc
Note we do not use Split-DNS on our internal domain either. Our AD name is different than our public domain name - The AD is named with a subdomain: qs.companyname.com
Lastly, I did not create an MX record at network solutions for mail.domainname.com. Should I do that and set it to a higher priority? -
Ok i can hardly see what i am typeing atm, but i am incliding a screen shot of what the **** i am going thru, If anyone had a idea please let me know what they **** is going on. Or how to fix this. Ill prob be able to read this at work tomorrow since i never upgraded my Macs there any higher then 10.4.10.
So i took a screen shot of my font folder and this is ahppening everyone on my mac. Happens lallmost every other day.
[IMG]http://homepage.mac.com/ficchi/.Pictures/Problem.jpg[/IMG]Guess no one knows of a specific issue going on with my Mac?
-
Major graphics problem - help!
Over the past month or so I have begun to notice an intermittent issue with my graphics where multiple vertical lines of different and changing colors appear to "rain" all over my desktop. I've tried different user accounts, display settings to no avail.
Another user had this problem about a year ago and posted a picture nearly identical to my own problem: http://discussions.apple.com/message.jspa?messageID=4133857#4133857
In this thread the user traces his problem to the graphics hardware, which he was trying to replace, but doesn't say whether or not that resolved his issue.
I ran an extensive hardware diagnostic at the local Apple store which found no problems with the graphics card. The guy there offered to replace the card for $350.
So now I have a conundrum. I'm planning to replace this system in the near future - but what do I do with this powermac? It has 5.5 GB RAM and has performed nearly flawlessly for over four years. Can I sell it in good conscience? What more can I do to resolve this problem?Hi Eric Beyer-
When you can take a screenshot of the problem it is generally the graphics card.
If you take a screen shot while the problem is happening, and then look at it when the picture is normal, and you see the problem that would be it.
Have you opened it and looked for dust build-up?
Luck-
-DaddyPaycheck -
IPod Glue Major Glue Problem, HELP
Hey guys!
Recently after I bought my iPod Nano 6th gen, I got a case for it, got all my songs on it, awesome! But there's more. See I'm a perinoid guy, and all the cases left the back metal clip naked, and dropping the iPod on that section could cause some shock wave damage to the iPod, and sratch the back up pretty bad.
So stupid me went and grabbed a few pieces of small rubber and glued the on to the back with elmers all purpose glue stick. It's a living nightmare. The whole thing is sticky, the clip, the case, the iPod. I let it sit for 3 days and its got that oily feeling to it because of the glue anywhere you touch it.
Does anyone know how to properly clean this up, WITHOUT, harming the iPod? Please give any sugestioins!
Thanks,
Ale47099See here: How to clean Apple products
B-rock -
MAJOR EXPORT PROBLEMS! PLEASE HELP!
Hello. I hope everyone had a nice holiday. I'll try to be brief. I'm having a horrible problem with exporting my films. I work on a PC. To me, that shouldn't matter, but here's what's been happening. I shoot my films at 23.976 frames on the 5DMII and the 7D. My film got into a film festival. They asked for a 720p mp4 file. OK, no problem. I went under H.264, I exported an HD File, with 23.976 frame rate and I checked both boxes for Max Render and I set a 2-pass. I exported and when I played the vid back through Windows Media Player, it felt fine.
BUT, at the festival this past weekend, I was horrified to discover that my film, and no other films, was having a major sound problem. The audio was about half a second ahead of the footage, so they kind of looked like they were speaking correctly, but their dialogue would finish right before their mouths would. Super embarrassing. All I noted when I saw the tech booth was that they were using a mac laptop hooked to the projector, so I assume maybe it was quicktime they were running? Also, I believe they put all of the vids together as one file so it would run together as one block, but still, I believe most of the other films were shot at 23.976 frames as well, so that shouldn't matter.
I went home, thinking maybe I just wasn't being diligent enough and I needed to really look at the sound. Maybe it was off. But I keep all of the temp tracks, the sound from the dslr, on track 1 and then just mute it. I unmuted and played both tracks, and there's no difference. No echo, no weird delays, they're both perfectly synched up.
I've been having this problem for a long time but this was the first time that I REALLY could see the problem, probably because it was on such a big screen. Just my opinion, but I've found that most festivals are running MAC software and it seems like the vids I export seem to have an audio problem being played through mac programs. Another instance, briefly. I did a screening for a feature I edited. I exported an HD mp4 and put it on a friends MAC. The sound was off when we pre-screened it. I have a PC Toshiba laptop, I ran the vid through windows media player, and it felt much better, so we screened using my laptop and it went fine. But what does that mean?
Has anyone else had this problem? It's not just festivals too. I have a subscription with Vimeo, but every short film that I put up there has some kind of an audio drift problem. It's always minor so some people see it and some people don't, but I'm certain the vids are fine on my timeline. Do I need to export using something else? A different setting? As a quicktime vid? That last question seems kooky since any tutorial I've seen is usually wanting h.264, so I just don't know.
Please let me know if there's anything I can try or if you just have an opinion. Thanks very much.im sorry i cant seem to start a new topic PLEASE HEEEEEEEEEEEEEEEEEELLLLLLLLLLPPPPPPPPPPPPP
all of a sudden about half an hr ago my computer froze & went all spastic. i retsarted & now ALL MY SONGS ARE GONE FROM MY IPOD!!! I HAD 10 000+ SONGS HOW DO I GET THEM BACK!?!?!??
please tell me theres a way. when i check the ipod itself it says 0 songs 0 videos but strangely my 87 photos are still on there. also when i reconnect it to the computer it says to restore its factory settings but when i go to update/restoe it says i have 10GB left (its a 60Gb video ipod) so i think the songs are still stored there but i cant access them or something please help me!! -
Questions you need to answer to receive better help
Questions you need to answer to receive better help... please answer as much as you can, that relates to your problem, back in your original message
If a program is not showing on the Cloud screen, it is most likely because your computer does not meet the specifications
FOR EXAMPLE, Premiere Pro requires a 64bit computer - Not all apps displayed for download | Creative Cloud desktop app, Adobe Application Manager
What error message do you see, or what is the screen you see that does not work? (examples... a BLANK login screen, or a spinning wheel)
A screen shot works well to SHOW people what you are doing - http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Are you using Windows or Mac, and exactly which version? (include "dot" numbers like Windows 8.1 or Mac 10.9.3)
Which brand and version web browser are you using... and have you tried a different web browser?
What Firewall do you use, and have you tried turning it off to download?
What anti-virus do you use, and have you tried turning it off to download?
Has this ever worked before? If yes, do you recall any changes you made to the program, such as adding Plug-ins, etc.?
Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs since this last worked?
Are you using an account with Administrator Privileges? Run as Administrator will sometimes help (this EXAMPLE http://forums.adobe.com/thread/969395 is for Encore + "All" Premiere)
What were you doing when the problem occurred?
What other software are you running?
Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
Hardware Blue Screen shutdowns http://forums.adobe.com/thread/1427408?tstart=0
For Windows, do NOT rely on Windows Update to have current driver information
(you need to go direct to the vendor web site and check updates for yourself)
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
Do you have dual graphics adapters? (common in many "energy saving" laptops)
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
-and a Mac Utility http://forums.adobe.com/thread/1017891?tstart=0
JUST FOR MAC USERS
Next link says After Effects, but check YOUR permissions !!!
-http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
-Mac 10.9.4 and OpenCL issue https://forums.adobe.com/thread/1514717
Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
-more Mac 10.9.3 https://forums.adobe.com/thread/1491469
-Mac 10.9.3 and CS6 https://forums.adobe.com/thread/1480238
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0
Case sensitive hard drive
-http://helpx.adobe.com/creative-suite/kb/error-case-sensitive-drives-supported.html
Troubleshooting guide for Mac freeze
-http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-mac.html
-next link says After Effects, but check YOUR permissions !!!
-http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
Some links concerning error codes
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
A12... download & install error http://forums.adobe.com/thread/1289484
-more A12... discussion http://forums.adobe.com/thread/1045283?tstart=0
U44.. update error http://forums.adobe.com/thread/1289956 may help
-more U44.. discussion http://forums.adobe.com/thread/1275963
-http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
-http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
http://helpx.adobe.com/x-productkb/global/installation-launch-log-errors-creative.html
Repeated updates http://helpx.adobe.com/creative-cloud/kb/updates-repeatedly-applied-cc.html
Code 6 & Code 7 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Error 16 http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
-including DW039 https://forums.adobe.com/thread/1500609
Error 49 https://forums.adobe.com/thread/1491394
Error 50 https://forums.adobe.com/thread/1432237
Errors 201 & 205 & 206 & 207 or several U43 errors
-http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
Muse error http://helpx.adobe.com/muse/kb/unexpected-error-occurred-i-200.html
InDeisgn error http://helpx.adobe.com/indesign/kb/indesign-cc-crashing-launch.html
Sign Out When Sign In http://forums.adobe.com/thread/1450581?tstart=0 may help
-and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
-and 'looping' https://forums.adobe.com/thread/1504792
BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html
Mac Spinning Wheel https://forums.adobe.com/message/5470608
-Similar in Windows https://forums.adobe.com/message/5853430Does anyone know if there's a way to change the questions themselves? (Frankly, they have to be the most ridiculous security questions I've ever seen. A good security question should be one that you'll have no problem remembering the answer to, even if you're asked years later. To answer one from the third batch, I'd have to make something up, which makes it unlikely I'll remember the answer later. And I certainly don't want to have to write the answers down somewhere.)
-
Hello,
I have read lots of threads for FTP receiver problems wiht overwriting files....
But I am not sure which is the correct solution.
We have:
- Cluster (6nodes), PI711 (SP03)
- a time stamp shoudl be in the file name
- there is dynamice filename, because first char of the filename must be set from mapping
- each mesasge must be put in a single file (not APPEND mode)
After few test it seems that files are overwriten.
I tried ADD MESSAGEID, which seems to work correctly, but with dynamic filenametimestampmsgid the filename is to long for the next application.
I saw in a note, that the cluster can be the problem....
Any idea how I can solve my problem?
Does "use temporaly filename" help?
How is it used correctly????
best reagrds
WernerHi Werner,
In Processing Parameters tab, keep the file construction mode as "Add timestamp" and in the Putfile use" Use Temporary file". This should help you...
Refer the below link regarding Configuring the Receiver FTP Adapter
http://help.sap.com/saphelp_nwpi711/helpdata/en/44/69d7cfa4b633eae10000000a1553f6/content.htm
Thanks, -
Major system problems, hanging up at startup.
I'm developing some major sytem problems with my G4 Mac. It all seemed to start with a jumping cursor and then a dying mouse. I could not get the Mac to startup with several trys. It wouldn't even start up off of my external drive. I would get the first four icons in the upper right hand corner of the screen and the it would hang. I tried all of the usual fixes- permissions, disk utiliy, Disk Warrior, zapping pram. I finally started unplugging external items and getting back to original Mac- switching the firewire port in the back of my Lacie external drive helped for awhile, but now I'm getting the jumping cursor again and fearing I'll get a hangup again. Any ideas on how I can solve this problem? If not, can you point me somewhere for instructions on how to reinstall the system software? I have already installed a clean system on my external drive. Once I reinstall all of my apps there, and get it running properly, can I move all of that to my internal HD somehow? My original system disks for this computer is Jaguar 10.2 if that helps.
Thanks for your help,
Dick SkoverDick,
Some observations and notes.
Have you tried using a different mouse, or changing
the port it is plugged into?
Yes, I tried and am using a inexpensive Logitech optical mouse. The one that came with the computer seemed to get very eratic and then not work at all. I did try plugging into different ports and that didn't make a difference.
How did you upgrade from Jaguar 10.2.x to
Panther 10.3.9?
I upgraded the simplest way, I guess. I had read about more complex ways to do it at the time Panther came out, but also heard you could do a simple upgrade. I don't remember the exact steps I used. Boy, this is way more complex than my original Mac in 1984.
What size is your Hard Drive, and how much space is
available? I should say I have quite a few applications.
My HD is 75 Gig with 17 Gig available.
Is your installed RAM original or added?
Yes, it came installed when I purchased it: 1.5 Gig
In one post you wrote "My original system disks
for this computer is Jaguar 10.2..."
I heard something back when Panther came out that the fact I started with 10.2, didn't allow me to do certain things like archive and backup.
But in another, you wrote "Yes, my original
Panther disk and then updated everything via
Internet."
Please clarify.
When I decided to install a clean system on my external HD I just used my Panther 10.3 disk- I didn't go all the way back to 10.2
"Yes, Disk Warrior found some problems, I don't
know exactly what they were."
Were the errors corrected? Have you rerun Disk
Warrior, to see if they are indeed repaired?
Actually I ran DW today again on the internal HD and it came up with a couple of problems that it said it repaired. Should I keep running it until it doesn't indicate any problems?
A couple other things you can check.
Open System Preferences > Accounts > Your Account >
Startup Items.
Is there any item in there that you are not familiar
with, or did not put there yourself?
Yes I did try that- I had a repair person come in to help me. He did point that out and we deleted items that didn't need to be there. What he suggested did help for a week, but the problem came back. I called him again, but he said the only thing left to do was re-install.
From the Utilities folder, start Activity
Monitor.
Select Active Processes.
Watch for whatever process is hogging %CPU.
Yes he ran activity monitor also- there didn't seem to be programs hogging the processor although we deleted those that look familiar.
I also have a question about the title screems that pop up on start up. In the past I used to have several things being checked as it went through the process, now I get welcome to Macintosh and that's it. I seem to remember indications that Macaroni was running, but no longer see any of that. I do have Macjanitor also and thought that one of those automatically runs at startup?
I will run pseudo daily, weekly and monthly tasks now. Is this something that Macjanitor does, or should I run the maintenance scripts periodicaly?
ali b -
Hello,
I'm having a major iPhone problem!!!
My phone crashed yesterday and wont turn back on or charge since then. It will start up with the apple logo and then the screen goes dark, will only stay on for about 30 secs. It's an original not jailbroken or anything like that. iTunes won't recognize it at all, I tired resetting it, hard resetting it, a different cord, basically everything and NOTHING works!
Please help! Thank you!try doing a hard restart - hold home + power until the phone shuts down... then connect it to your puter.
you may have too many things running in the background on the phone... i have heard fetch & push can drain your battery like you experienced... i don't use them, i get my mail when i open the application. -
After Int Install OS10.5.8 on PowerPC G4 having major system problems (created user to verify) CS4 apps go non responsive
Ok no difference, I don't get any drive errors that seem significant or numerous, sometimes I don't get any at all, the disk always verifies and I haven't had to run a repair on it yet. I've gotton one or two drive errors, I'll save them next time I run either DU or DW.... however with permissions, there are a lot and they all fix (except: see below: Last 3: ACL errors are always there) but as I keep having to do force quits and system re boots they keep coming back; posted them below IDK if this will help you to help me, LOL... but figured it couldn't hurt, the ones below are re-occuring I know i've seen them b4. . . Don't know if this makes a difference but on initial install I had several font conflicts w/system fonts, I renamed suitcases and that error message hasn't come back . . . but do you think this could be a font issue . . . I have like 12,000 fonts of which a couple hundred are ususally always active . . . IDK it doesn't make sense to me it would be, but you never know... just a shot in the dark
I also saved my last PS crash report and it was like 100 Pages long, I've never seen one that long, I make a pdf of it and post link to my idisk, if its something that you can interpet.
Verify permissions for “Rayce”
Reading permissions database.
Reading the permissions database can take several minutes.
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
ACL found but not expected on "Applications/Utilities".
ACL found but not expected on "Applications".
ACL found but not expected on "Library".
Permissions verification complete
Repairing permissions for “Rayce”
Reading permissions database.
Reading the permissions database can take several minutes.
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
ACL found but not expected on "Applications/Utilities".
ACL found but not expected on "Applications".
ACL found but not expected on "Library".
Permissions repair complete -
MAJOR FONT PROBLEM - GREEK FONTS - GREEK SYSTEM
Dear All
I own a G4 purchased from a local Apple Authorized reseller for greece Rainbow computers in order to be able to use Greek fonts. Recently upgraded to OSX Version 10.4.3
However I'm facing major font problems in applications such as Adobe Software i.e CS2
Greek fonts that actually work are very limited. For example in Illustrator only Myriad Pro and Lucida Grande function properly.
In Macromedia Freehand although a few more greek fonts work, they either disappear or become scrambled when I attempt to "Convert them to curves"!
This only applies to OSX Tiger. Panther seemed to be working fine for this, in Freehand.
I work as a graphic designer and it is very frustrating when I'm only limited to very few greek fonts even on a GREEK SYSTEM!!!
By the way: I tried all suggested methods on the forum such as: Greek keyboard layouts, verifying permissions, switching to System Greek Language, reinstalling Illustrator etc..
Is there anything else that i can do?
Pls help.. !I own a G4 purchased from a local Apple Authorized
reseller for greece Rainbow computers in order to be
able to use Greek fonts.
Generally speaking, for problems with Rainbow's stuff you need to consult Rainbow. Apple itself does not produce a localized Greek system or the special add-ons that Rainbow provides to let you use non-Unicode Greek with older apps.
However I'm facing major font problems in
applications such as Adobe Software i.e CS2
Greek fonts that actually work are very limited. For
example in Illustrator only Myriad Pro and Lucida
Grande function properly.
For an app like this you probably need to use Unicode Greek fonts. Those that come with Tiger are Lucida Grande, Helvetica, and Times. If you have MS Office 2004, you can also use Arial and Times New Roman and maybe Verdana from that app. Plus modern Adobe fonts like Myriad or Minion Pro. I suspect that legacy non-Unicode fonts will not work.
In Macromedia Freehand although a few more greek
fonts work, they either disappear or become scrambled
when I attempt to "Convert them to curves"!
I think Freehand is non-Uncode and probably needs the older fonts.
For problems with Adobe and Macromedia apps, you might also want to ask in their forums:
http://www.adobe.com/support/forums/main.html
http://www.macromedia.com/support/forums/ -
My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!
Thank you both for your responses but my daughter was reassured by the salesman in the iStyle store (official Apple store in the UAE) that iMessages would work but conceded that FaceTime wouldn't. My iTunes account is registered in the uk and my daughter's iPhone has iMessages even though she bought it (and uses it) in Dubai. Can anyone else throw any light on this?
-
I couldn't log into my apple account on my iPad, then i couldn't unlock it resulting in it being disabled, however it's the same as my iPhones password, I then called apple, i was hung up on twice and they said it will cost £70 to fix THEIR problem, help?
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad/iPod into Recovery Mode
http://support.apple.com/kb/ht4097 -
iPad sync problem - HELP! I keep getting this message "...cannot be synced because there is not enough free space to hold all of the items in the iTunes library (additional ...space needed)" and yet I seem to have plenty of space on the iPad. This just started today. I even tried deleting some things to make even more room, but it didn't help. Any ideas???
I was thinking of restoring, but I've never done it... should I?
thank you!Hello florafromnv,
Welcome to Apple Support Communities.
The following article addresses how to resolve the issues related to this message:
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/TS1503
Regards,
Jeff D.
Maybe you are looking for
-
Problem in installing Windows 8 on T430 laptop
I just received 3 new T430 laptops in my office and tried install winodws 8 on them with the pre-configured bootable DVD with ImageX. But, just after the initial "W8 PE boot mechanism 9.1" screen the laptops aregetting re-started automatically withou
-
Have an OS X 10.9.4 and having problems with iPhoto library after installing iPhoto version 9.5.1 This has locked the iPhoto Library on a locked disk. Any idea on how we unlock this disk?
-
Popup List with multiple columns but returning a single column (key value)
Hi, 1. Is it not possible to show a POPup (returning a key value) or Select list with more than 1 column? If so how? 2. I have an item in a page which should be hidden if 1 particular button was pressed. This is is to use the same page but have some
-
I have installed Exchange 2013 on Windows Server 2012, which ist a member of a Windows Server 2012 R2 Domain. All prerequisites and AD modifications were successfully completed and I could install Exchange 2013. Unfortunately I made a mistake with t
-
MAC OS X 6.0.7. & Win XP + Office
I just picked up the macbook pro- my first mac. I understand parallel should work nicely with XP (hopefully). So, I picked up XP. I will be transferring (hopefully) files from an old PC running Win 98 (not 98SE) with Office 2000. Should I attempt to