Major Situation Need Advice Fast

Just dropped my Macbook 2.16 computer turns on and there is a desktop there but it is dark. Everything seems to work but no back light on the monitor. Tried resetting the Pram. Not sure if I need a new display or there is a fix. Either way I need to know any advice is appreciated.

Sounds like a hardware issue, but try this yet, short of having it looked at.
Try resetting your SMC.
Resetting the System Management Controller >>
If the screen needs replacing, check with TechRestore. They may be cheaper ($489.99) than Apple.
-Bmer
Mac Owners Support Group - Join us @ MacOSG.com
  Mac611 Mobile Mac Support - about.Mac611.com
   iTunes:MacOSG Podcast | YouTube.MacOSG.com
                   An Apple User Group 
Have an iPhone or iPod touch? Enter Mac611.com in Safari on it for 'mobile Mac support.'

Similar Messages

Need Advice Fast About Lion Thumb Drive Please!

Here's my situation, I've got several Macs that are on Snow Leopard that can upgrade to Lion but not Mountain Lion, I've been looking around for the Lion thumb drive, but can only find it on eBay, or some pirated version on Amazon.com.
Here's the one I'm looking at http://www.ebay.co.uk/itm/140823936141
Can anyone confirm that I can use this Lion thumb drive on as many Macs as I want? I can't really find it written definitively anywhere on the net that I can use it on a unlimited number of Macs. Thanks, please reply ASAP.

You can make a USB thumb drive with the Recovery HD only on it and use it to boot into the Recovery HD to download/install Lion on the Macs you own or control. The Lion Recovery Disk Assistant is used to create this thumb drive. It does not have the full installer. You can install the assistant on any Mac that is running Lion.

Need advice fast!!!! Midland credit

I recently agreed to settle for a discount payment to mark my collection as paid for a T-Mobile bill which mind you I never had...anyways the full amount was 538 I agreed to settle at 215 and it was promised that it would make the collection paid...I received a letter from Midland credit stating that I had a balance of a little over 300 dollars...I called them to ask why the balance was not zero as promised...the lady reassured me that it was an error and to disregard the letter...today midland credit updated with a balance of a little of 300 remaining!! I called them back but as soon as I get to customer service I get disconnected every time so my question is what should I do next?

Astuart881 wrote:
I recently agreed to settle for a discount payment to mark my collection as paid for a T-Mobile bill which mind you I never had...anyways the full amount was 538 I agreed to settle at 215 and it was promised that it would make the collection paid...I received a letter from Midland credit stating that I had a balance of a little over 300 dollars...I called them to ask why the balance was not zero as promised...the lady reassured me that it was an error and to disregard the letter...today midland credit updated with a balance of a little of 300 remaining!! I called them back but as soon as I get to customer service I get disconnected every time so my question is what should I do next?Use the laws afforded you in the FCRA on ID Theft to get it removed from your CR. I never would have made an agreement to pay something that wasnt mine and if threats were made during the process I would be sending the CA an ITS letter for violations of federal law (FDCPA) with demand for refund of the amount you paid to settle along with full removal of the TL from your CRs. http://ficoforums.myfico.com/t5/General-Credit-Topics/Victim-of-Identity-Theft-What-To-Do-to-Protect-Yourself/td-p/2059499

Major Issues with installing 4tb internal. Really need advice please

In the process of a long needed upgrade to my 2010 Mac Pro Quad core 2.8 and have run into a serious headache that I really need advice on so I can get back to work. I've already spent 2 days dealing with all of this...
Just did a new SSD install and Migration which went fine but I'm also updating the rest of the internal drives. My main (non boot) drive was being upgraded from a Seagate Barracuda 3tb to a 4th Deskstar NAS (it was showing as compatible with my desktop, see links below). My 3tb ran fine for years but now due to it being heavily used I want to switch to a new drive and I can also use a bit more space.
The issue I'm running into is that initially on boot, my system was telling me it couldn't recognize the disk and it wasn't even showing up in Disk Utility. I had to purchase a SATA USB 3 kit to attach it as an external to get it to show which worked without problem. With the USB kit I was then able to partition it (GUID, Mac OS extended journaled) and format it properly. After reinserting the drive into my tower as an internal it failed to show again. After a few attempts of restarts and trying various bays it popped up but showed as a non formatted drive and I was told again that the system didn't recognise it. I was then given the option to initialise and was then actually able to then format and partition it though Disk Utility while it was installed as an internal.
Figured that was problem solved but when I went to check the drive and getting ready to transfer files over I noticed that Disk Utility was only allowing the First Aid and Partition options but not Erase, RAID, Restore which I'd never seen before. I then also noticed that none of the drive connection info was in the same format nor will it even provide drive bay info, connection info or read/write status (See screen shots). This is what I can't figure out and really need to clarify before I put full trust into using this drive.
Any info would be greatly appreciated...
Deskstar 4tb internal info which is installed in Bay 2
3tb Seagate which I trying to retire and transfer from.
Here are the weblinks to the Deskstar 4tb drive and the compatibility list but I support isn't allowing me to add direct links so add the www. before hand.
(Drive - eshop.macsales.com/item/HGST/0S03664/) (compatibility list - eshop.macsales.com/Descriptions/specs/Framework.cfm?page=macpromid2010.html).

What OSX version?
Disk Utility in later versions of ML and I think Mavericks have problems formatting with 4 TB internal drives.
http://forums.macrumors.com/showthread.php?t=1661024
http://apple.stackexchange.com/questions/112266/why-doesnt-my-mac-pro-see-my-new -4tb-sata-drive

Need Help Fast! Page is dispalying twice in quiz

I have created a quiz using tips from another post in this
forum. I insterted a regular slide with a continue button before
the quiz questions. I insterted another regular slide at the end of
the questions with a re-take button that points to that first
slide. This part is working great. When I take the published quiz,
I click the continue button, and instead of continuing, the slide
redisplays. I click the button again, and it moves forward like
it's supposed to. Any advice?
I'm supposed to have these posted in our LMS today for
testing, so I need help fast!!! Thanks!!

What you're seeing is likely the result of a MS patch for IE
in response
to the Eolas patent suit.
MS recently updated IE so any content shown in a page using
the Embed,
Object, or Script tags will need to be 'activated' before
they can be
clicked (or otherwise 'interacted with').
Your home computer probably hasn't had the latest security
rollup
installed, is why you're not seeing the issue on that
machine.
There is a work around, many site mention it. This may be a
good place
to start:
http://www.macromedia.com/devnet/activecontent/articles/devletter.html
Erik
dukekelly wrote:
> Why is it that as soon as you ask for help, you find the
answer?
>
> This isn't a captivate problem at all. It's an IE
problem. Because the button
> is a control in Flash, our systems where I work are
requiring us to click the
> screen to activate the controls. THEN you have to click
the button. When I play
> the movie on my home computer, this phenomenon isn't
happening. Now, how am I
> supposed to deal with that??? ASRRGGGHH!!!
>
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.macromedia.com/support/forums/team_macromedia/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/groups?q=macromedia.authorware

Need advice on video software.

Need advice on video software.
I currently use adobe elements 3 and have done so for a few years now with no problems. my os is XP and my system is a couple of years old, but we do have a brand new win7 machine in the house.
I am currently look at Cyberlink PowerDirector 8 Ultra OR Adobe Premiere Elements 8. Reviews for both softwares seem very good BUT, when I dig deeper into user reviews instead of editor reviews do I find problems.
Major problems with program crashing all over the place, at start up etc, and it is still not getting along with any win7 machine? Major problems with drivers. Honestly, I do not want to have to jump through dozens of hoops to get any software to run. After I pay for it, it should run, period.
Has anyone else here used both softwares and can you give an honest opinion of each?
I am also asking these same questions on the cyberlink site.
I would like to upgrade my video software to take advantage of the new features that are coming out but I really don't want a big headache trying to run one or the other. To be fair, when I bought adobe elements 3 I had also bought pinnacle, which has gathered dust since my first week with it, which is why elements was purchased. That was money wasted and I do not wish to repeat this. I would like to go with Premiere Elements 8 but remain very unsure.

If your newer machine is Win7 64-bit, it might be worth waiting for SP-1 to be issued, and then hope that 64-bit drivers are fully included. The 64-bit drivers now seem t be an issue at this point, and that will affect any NLE program.
Also, and regardless of which particular program you choose, optimizing your computer, the OS, the hardware, and the resources management, will go a very long way to insuring success. Few programs can tax a computer, as an NLE can - any NLE. Video and Audio editing will stress your system, like almost nothing else can, except for heavy-duty CAD, or 3D work, though those are usually done only on specialized, optimized computers, designed just for those applications.
Not the specific advice that you seek, but it's the best that I can do.
Good luck,
Hunt

Doc Project with format confusion- need advice

I have a documentary project with a plethora of footage formats because the doc spans a long length of time and different project collaborators. We just shot more footage and I don't want to move forward converting the new footage until I know the best path to take form here on out. please advise.
Here is the info.
Below i'm listing the descritption of footage, the format, and the % I'm predicting it will be used in the final edit of the documentary I'm working on.
Archival Footage: DV NTSC 720x480 (10%)
Original footage shot: DV NTSC 720x480 anamorphic (40%)
Additional Footage shot in Summer 2010 with Panasonic HVX200: DVCPRO HD 720p60 29.97 (35% shared with canon 7D footage listed below)
Additional Footage shot in Summer 2010 with Canon 7D: shot 1920x1080 23.98 Apple Pro Res 422, pixel aspect square. I converted this footage to 720p60 29.97 to match the Panasonic footage but I still have the original files saved. (35% shared with hvx200 footage listed above)
New Footage shot with Canon 7D: 1920x1080 23.98 Apple Pro Res 422, pixel aspect square (15%)
Timelines:
- I edit the SD footage in timelines with SD sequence settings matching the format of the footage
- I edit the HD footage in timelines with DVCPRO HD sequence settings matching the format of the footage
- when footage of both formats ends up in one 'scene' the timeline is DV NTSC 720x480
- when I output a rough cut, I nested sequences and output DV NTSC 720x480
I have not converted the new footage yet and before I do convert it and then transform continue editing, I feel I need to re-evauluate how I'm approaching the multi-format situation. I need advice about the best path to take from here on out. WHAT WOULD YOU DO?
Should I upconvert the SD footage and do everything HD from now on? The final cut will probably be 50% SD and 50% HD with possibly more HD than SD.
If I do upconvert and go HD, is 720p60 29.97 the best format for me to use considering my footage sources? If you have any ideas, please also explain how you might go about carrying them out.
Thank you!

krgarty wrote:
Exactly, whic is why I'm seeking advice. the final delivery will be film festival screenings and hopefully broadcast, and considering the channels today that = HD.
That's not a final decision at all, that's a series of delivery options. You must produce your project in the highest resolution for which you have space, codecs and techniucal competency.You will save that as the "final" but I'd not call it that since nothing is ever finalized. Jsut keep naming the versions. Then you will open the full rez version and use any of several conversion or compresiona apps to satisfy all other distribution needs.
The omst flexible will be a 1080/60 format but that decision will cost you tons of conversion time, lots of space, and will require many stylistic decisions along the way.
That's what I would do but I'm not you and I'm not your client.

Need advice on video card

I just received my new MacPro 2x2,8 GHz Quad-Core Intel Xeon with two 500 Gbyte drives inside. I accidentally ordered four (4) ATI Radeon HD 2600 (256 Mbyte) videocards (stupid me - I thought "4xATI Radeon..." in the configuration meant that the card was 4 times more powerful than the cheapest card in the list...
So now I need to figure out what to do with the three extra cards I don't need. If Apple is not willing to take them back, I may sell them at ebay. What should I expect to get for a card like this?
I see that the ATI Radeon HD 2600 card is not the ultimate video card for the Mac... So I have started to wonder if I should have picked the more expensive card NVIDIA GeForce 8800 GT 512MB. I have read some opinions about the difference between these cards, but it seems that all the reviewers are gamers. - What I will be using the card for, is to run FinalCutPro, Motion and ArtMaticPro/Voyager to create HD video and animations.
With the configuration I have now, I can't play back 1280x720 HD in Animation (almost no compression). I wonder if this is normal, or do I need a faster video card than the ATI Radeon? I ordered the Mac with 2 Gbyte RAM, and I am waiting for additional 4 Gbyte to arrive soon (from a retail store - that saved me at least 250 USD compared to ordering this much RAM from the Apple Store
Any thoughts and advice is very much welcome!

Hi,
If I could use one of these to drive a second VGA CRT on my computer (same model as yours),
I might be willing to buy one of them.
I now know that I cannot use the same displays setup I had with my G4 with the new MacPro.
Would love to know if simply adding a video card would solve my problem.
My very old Apple CRT 15" monitor that I bough NIB about 2 years ago (and works great) doesn't play nice in a 2 monitor from 1 ATi Radeon 2600HD setup.
I am wondering if adding a second card will solve the problem.
Thanks, and so long for now, TOM

Need advice about certification: do J2SE 1.4 or wait for 1.5 to go out?

I need advice here! I am studing for Java Programmer certification (310-035) and I know now that the certification does not have any expiration date, instead it's version based. So, if I get now a J2SE 1.4 certification, soon it will be outdated... I guess!
Does anyone know or have any ideia of WHEN java 1.5 sdk will be avaliable, and anyone can tell me how long it will take for a new 1.5 programmer certification be avaliable for general public?

Do both. 1.5 is far enough away that you do not want to wait for it.
And besides, 1.5 has enough new stuff in it that you'll want to recertify anyway.

Need advice on on a Mac Pro 1,1 Media Center

I currently have a 2009 Mac Mini running as my home media center, but I recently came by a FREE Mac Pro 1,1 and have decided to repurpose it as my media center so I can migrate my Mac Mini to my bedroom TV where it will live an easy life doing nothing but run Plex Home Theater, Netflix, and EyeTV. This machine falling into my lap was also quite timely because my 4-bay Drobo is running low on available expansion and another Drobo isn't in the budget at the moment.
This vintage mac pro is running Lion 10.7.5, has 1 old and crusty 500GB hardrive, dual x5160 processors, 4GB RAM (one stick i'm pretty sure is toast judging by the red light and the kernel panics), and the standard NVIDIA GeForce 7300 GT 256MB graphics card. It will be used primarily for the following: network storage for iphoto and itunes libraries, streaming video, Plex Media Server & Plex Home Theater, and Handbrake encoding. I also have a goal of safety of data for my movies, photos and music as this machine will supplement my current Drobo storage.
My plans are for a 128GB SSD boot drive installed in one of the PCIe slots and then to load up all 4 of the 3.5" drive bays with WD Green hard drives. I have also ordered 4GB of replacement RAM, so upon removal of the faulty unit I will have 7GB.
Here is where I need advice because I am not very familiar with RAID and the differences between hardware or software raid. Am I better off getting four drives of the same size and setting them up as RAID 5 (I think) using Apple's RAID utility or should I throw in three 1TB drives and then install a fourth 3TB or 4TB drive as a Time Machine backup for the other three?
Should I upgrade the OSX to the technically unsupported latest version? Or is it not worth the trouble for this application?
Also, is there any benefit to upgrading the graphics card to the ATI Radeon 5770? Would this yield an improved image quality? I am outputting to a Denon AV Reciever and subsequently to a 100" projection screen, if that makes a difference. I also noticed the 5770 has an HDMI port, wich would be nice, but not necessary since I can use a DVI converter and woud still need to use the optical audio out anyway.
Much obliged for any input

My plans are for a 128GB SSD boot drive installed in one of the PCIe slots and then to load up all 4 of the 3.5" drive bays with WD Green hard drives. I have also ordered 4GB of replacement RAM, so upon removal of the faulty unit I will have 7GB.
PCIe cards that use or support SSD are not bootable until you get to 2008 (and that is limited too).
Green are not suited for any form of array unless say NAS and WD RED. Better option would be 3 x 2TB WD Blacks in a mirror, and too many people only use two drives, well 3 is much easier safer and works better. Might want to invest in www.SoftRAID.com product even.
Best price and quality, got my 1,1 with 8 x 2GB (ideal is 4 or 8 DIMMs)
2x2GB FBDIMM DDR2 667MHz @ $25
http://www.amazon.com/BUFFERED-PC2-5300-FB-DIMM-APPLE-Memory/dp/B002ORUUAC/
With price of 250GB SSD $155 I'd go with that or stick with $89 for 128GB .

I NEED HELP FAST!!! how can i activate wi-fi if i want to use that for facebook apps instead of wasting my data?

i want the 200 mb plan for my iphone and wanted to know if instead of using safari i can use apps such as facebook or tumblr without using up my data. i got the asnwer that i can avoid that by using wi-fi, but how does that whole thing work?
sorry i am a bit new at this, and i need help fast!
THANK YOU!

hookedonlerman wrote:
but will that replace the use of using up data? (wifi & 3G)
It sounds as if you don't really understand what "using data" means. Data is not something different from WiFi and 3G, it's something sent over WiFi and 3G. Think of data as water and WiFi and 3G as types of pipes. Some apps need to send and receive data to work. That data can be sent or received in different ways. It can be sent over WiFi or 3G. Both official iPhone carriers in the U.S. have metered data plans. It's sounds as if you're talking about AT&T's 200 mb data plan. WiFi is not provided by your cellular carrier. You can have WiFi from your Internet Service Provider at home or you can access free WiFi at places like McDonalds or Starbucks or paid WiFi at places like airports.
If you have WiFi turned on on your phone and WiFi is available, the phone will default to WiFi. WiFi is faster than 3G and generally not metered, and is sometimes even free. If you are out of range of WiFi, you would be using 3G to send and receive your data. With a metered plan, you need to keep an eye on how much you are using because if you go over your allowance, you will be charged additional fees.

My daughter has spitefully changed my password and has refused to tell me. I have so much medical information that I can not lose. Is there anyway to get around this problem. Please I need Help fast.

My daughter has spitefully changed my password and has refused to tell me. I have so much medical information that I can not lose. Is there anyway to get around this problem. Please I need Help fast.

Connect the iPod to your syncing computer and restore it via iTunes. However, if iTunes asks for the unknown passcode you need to place the iPod in recovery mode and then restore the iPod from backup. For recovey mode see:
iPhone and iPod touch: Unable to update or restore
"If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone and iPod touch software."
Above is from:
http://support.apple.com/kb/ht1212

My little brother messed up with my iPod touch 4th Gen by entering the wrong password , now all data is beeing erased what should I do.The iPod is just showing the Apple Logo and some buffering icon below it.Need help fast!I'm really worried!

I really need help this has happend 5 hours ago and the ipod os still showing the apple logo and the buffering icon below it!
It re booted several times till now.
Need help fast!

- I suspect that he went to Settings>General>Reset>Erase all content and settings. For 1G or 2G iPod that can take hours and it will likely stall out if not connected to a charging source.
Try the following:
- A reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- The connect to computer and try to restore via iTunes.
- Id something is still showing onthe screen, disconnect from computer/charging source and let the battery fully drain. After charging for an hour, Try the reset and restore.
- If you can turn the iPod off, se if placing the iPod in recovery mode and then restore. For recovey mode:
iPhone and iPod touch: Unable to update or restore

Need Help Fast Please

Why does this code not do what I want to happen?
I have a 7 non functional buttons above the buttons for the days in the month and I would like to be able to layout the buttons starting on the day that the month begins and ending where it ends.
Like in the microsoft windows calander.
Any ideas as to how I'd do this?
I need help fast. Please.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.io.*;
import java.util.*;
public class MyDairy extends JFrame
     //Initilises Global Variables
     myHandler H = new myHandler();
     monthHandler J = new monthHandler();
     openHandler O = new openHandler();
     String monthName;
     JComboBox months;
     static String[] daysOfWeek = {"Sun", "Mon", "Tue", "Wed", "Thur", "Fri", "Sat"};
     static int[] daysInMonth = {31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
     JFileChooser box;
     public MyDairy()
          //Initilises the JComponents
          JMenuBar menuBar;
           JMenu menu;
          JMenuItem menuOpen;
          JMenuItem menuSave;
          JMenuItem menuExit;
          JButton dayName[] = new JButton[7];
          JButton day[] = new JButton[36];
          JPanel b;
          JPanel a;
          Calendar today = Calendar.getInstance();
          Calendar startOfMonth = Calendar.getInstance();
          startOfMonth.set(Calendar.DAY_OF_MONTH,1);
          startOfMonth.set(Calendar.DAY_OF_WEEK,7);
          System.out.print(startOfMonth);
          //Sets up the Layout
          setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          Container c = getContentPane();
          c.setLayout(new BoxLayout(c, BoxLayout.Y_AXIS));
          a = new JPanel();
          a.setLayout(new GridLayout(0, 7));
          b = new JPanel();
          b.setLayout(new GridLayout(5, 7));
          //Sets up and adds the menu bar
          menuBar = new JMenuBar();
          setJMenuBar(menuBar);
          //Adds the File menu
          menu = new JMenu("File");
          menuBar.add(menu);
          //Adds the menu items
          menuOpen = new JMenuItem("Open");
          menu.add(menuOpen);
          menuSave = new JMenuItem("Save");
          menu.add(menuSave);
          menuExit = new JMenuItem("Exit");
          menu.add(menuExit);
          //Produses the ComboBox
          String[] name={"January", "Feburary", "March", "April", "May", "June", "July", "Augest", "September", "October", "November", "December"};
          months = new JComboBox(name);
          int m = today.get(Calendar.MONTH);
          int d2 = today.get(Calendar.DAY_OF_WEEK);
          System.out.print(d2);
          months.setSelectedIndex(m);
          months.addActionListener(J);
          c.add(months);
          c.add(Box.createVerticalStrut(10));
          switch (months.getSelectedIndex())
                   case 0: for (int i=1; i<36; i++)                          {
                     if(i<4)
                        day[i] = new JButton();
                        day.setEnabled(false);               }
int k = 1;
day[i] = new JButton(" "+k);                b.add(day[i]);
day[i].addActionListener(H);               k++;
}break;
//other case statement up to 11 are simaliar          }
c.add(a);
          //Produces an Array of Buttons
          for (int i=1; i<36; i++)
               day[i] = new JButton(" "+i);
               b.add(day[i]);
               day[i].addActionListener(H);
          c.add(b);
          updateNameField();
          setSize(400,400);
          show();
     }//constructor
     private void updateNameField()
          monthName = (String) months.getSelectedItem();
     class myHandler implements ActionListener
          public void actionPerformed(ActionEvent e)
               new Text_Area(monthName);
     class openHandler implements ActionListener
          public void actionPerformed(ActionEvent e)
               File f1 = New File ("2003.dat");
               simpleSerializer S = new simpleSerializer(f1);
               MyDairy = S.readObjectFromFile();
     class monthHandler implements ActionListener
          public void actionPerformed(ActionEvent e)
               updateNameField();
     public static void main(String[] args)
          new MyDairy();

Container c = getContentPane();
c.setLayout(new BoxLayout(c, BoxLayout.Y_AXIS));don't code like above try something like...
Box box=Box.createVerticalBox();
c.add(box);
----so on
Hope this will help...

What are the major situations to go to the short dump in abap programming?

What are the major situations to go to the short dump in abap programming?

Hi,
The major situations that an ABAP Program can result a dumb are as follows...
1) Poor coding i.e., if the data in the data base is less, then even a poor code can give you the result. But when you transport the program into Production, then there the same program will give you a dump, resulting 'TIMED OUT' error. So performance tunning is required for each and every program.
2) while calling a function module.
3) extracting of data into fields which are not type casted.
4) in case of x/y value, one should check the value of 'y' should not be zero, else a dump will result.
these are few which i can give for time being........

Major Situation Need Advice Fast

Similar Messages

Maybe you are looking for