Major system problems, hanging up at startup.
I'm developing some major sytem problems with my G4 Mac. It all seemed to start with a jumping cursor and then a dying mouse. I could not get the Mac to startup with several trys. It wouldn't even start up off of my external drive. I would get the first four icons in the upper right hand corner of the screen and the it would hang. I tried all of the usual fixes- permissions, disk utiliy, Disk Warrior, zapping pram. I finally started unplugging external items and getting back to original Mac- switching the firewire port in the back of my Lacie external drive helped for awhile, but now I'm getting the jumping cursor again and fearing I'll get a hangup again. Any ideas on how I can solve this problem? If not, can you point me somewhere for instructions on how to reinstall the system software? I have already installed a clean system on my external drive. Once I reinstall all of my apps there, and get it running properly, can I move all of that to my internal HD somehow? My original system disks for this computer is Jaguar 10.2 if that helps.
Thanks for your help,
Dick Skover
Dick,
Some observations and notes.
Have you tried using a different mouse, or changing
the port it is plugged into?
Yes, I tried and am using a inexpensive Logitech optical mouse. The one that came with the computer seemed to get very eratic and then not work at all. I did try plugging into different ports and that didn't make a difference.
How did you upgrade from Jaguar 10.2.x to
Panther 10.3.9?
I upgraded the simplest way, I guess. I had read about more complex ways to do it at the time Panther came out, but also heard you could do a simple upgrade. I don't remember the exact steps I used. Boy, this is way more complex than my original Mac in 1984.
What size is your Hard Drive, and how much space is
available? I should say I have quite a few applications.
My HD is 75 Gig with 17 Gig available.
Is your installed RAM original or added?
Yes, it came installed when I purchased it: 1.5 Gig
In one post you wrote "My original system disks
for this computer is Jaguar 10.2..."
I heard something back when Panther came out that the fact I started with 10.2, didn't allow me to do certain things like archive and backup.
But in another, you wrote "Yes, my original
Panther disk and then updated everything via
Internet."
Please clarify.
When I decided to install a clean system on my external HD I just used my Panther 10.3 disk- I didn't go all the way back to 10.2
"Yes, Disk Warrior found some problems, I don't
know exactly what they were."
Were the errors corrected? Have you rerun Disk
Warrior, to see if they are indeed repaired?
Actually I ran DW today again on the internal HD and it came up with a couple of problems that it said it repaired. Should I keep running it until it doesn't indicate any problems?
A couple other things you can check.
Open System Preferences > Accounts > Your Account >
Startup Items.
Is there any item in there that you are not familiar
with, or did not put there yourself?
Yes I did try that- I had a repair person come in to help me. He did point that out and we deleted items that didn't need to be there. What he suggested did help for a week, but the problem came back. I called him again, but he said the only thing left to do was re-install.
From the Utilities folder, start Activity
Monitor.
Select Active Processes.
Watch for whatever process is hogging %CPU.
Yes he ran activity monitor also- there didn't seem to be programs hogging the processor although we deleted those that look familiar.
I also have a question about the title screems that pop up on start up. In the past I used to have several things being checked as it went through the process, now I get welcome to Macintosh and that's it. I seem to remember indications that Macaroni was running, but no longer see any of that. I do have Macjanitor also and thought that one of those automatically runs at startup?
I will run pseudo daily, weekly and monthly tasks now. Is this something that Macjanitor does, or should I run the maintenance scripts periodicaly?
ali b
Similar Messages
-
After Int Install OS10.5.8 on PowerPC G4 having major system problems (created user to verify) CS4 apps go non responsive
Ok no difference, I don't get any drive errors that seem significant or numerous, sometimes I don't get any at all, the disk always verifies and I haven't had to run a repair on it yet. I've gotton one or two drive errors, I'll save them next time I run either DU or DW.... however with permissions, there are a lot and they all fix (except: see below: Last 3: ACL errors are always there) but as I keep having to do force quits and system re boots they keep coming back; posted them below IDK if this will help you to help me, LOL... but figured it couldn't hurt, the ones below are re-occuring I know i've seen them b4. . . Don't know if this makes a difference but on initial install I had several font conflicts w/system fonts, I renamed suitcases and that error message hasn't come back . . . but do you think this could be a font issue . . . I have like 12,000 fonts of which a couple hundred are ususally always active . . . IDK it doesn't make sense to me it would be, but you never know... just a shot in the dark
I also saved my last PS crash report and it was like 100 Pages long, I've never seen one that long, I make a pdf of it and post link to my idisk, if its something that you can interpet.
Verify permissions for “Rayce”
Reading permissions database.
Reading the permissions database can take several minutes.
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
ACL found but not expected on "Applications/Utilities".
ACL found but not expected on "Applications".
ACL found but not expected on "Library".
Permissions verification complete
Repairing permissions for “Rayce”
Reading permissions database.
Reading the permissions database can take several minutes.
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
ACL found but not expected on "Applications/Utilities".
ACL found but not expected on "Applications".
ACL found but not expected on "Library".
Permissions repair complete -
[SOLVED] System randomly hangs shortly after startup
First of all: hi everyone, as of last weekend I am a brand new Arch user
My problem: I installed Arch on Friday and had no problems with it all weekend, but on Tuesday the whole system suddenly started freezing within a few minutes of being switched on. My cursor stopped blinking, mpd output stopped, and nothing would respond. It didn't matter what I was doing at the time (mostly I wasn't doing anything, or was typing a command). It didn't matter if X was running, or what daemons were running (I disabled all of them eventually). Sometimes I hadn't even logged in yet (although the fault never occurred before agetty popped up). The timing was unpredictable but it always happened within a few minutes of system startup. I could see nothing in the output of dmesg, or in any system logs, that would indicate any problems. The fact that nothing had changed over the weekend, coupled with the unpredictable timing of the fault occurrence, led me to assume it was a hardware fault. However, I had three other operating systems on the same hardware and hard drive (Gentoo, Debian and Windows XP) which all were unaffected. I did an fsck on the Arch partition but there were no problems found, and the smartmontools didn't show any cause for concern either.
Eager to get past the problem, I reinstalled Arch on the same partition, erasing everything I did over the weekend. Freshly installed, with nothing installed besides the base and base-devel packages, Arch still hung just after startup even before I'd finished creating my user account. (Interestingly, the installer never suffered from the same fault.) Still thinking it could be a bad sector or something, I installed Arch on first the Debian, then the Windows partition (who needs either of those, right? ) but neither gave me a problem-free system.
Essentially my problem is this: Arch will no longer work when it is installed or run on the exact hardware that I installed and ran it on over the weekend, even though other distros can run quite happily on the same hardware! Does anybody have any ideas? I've been bitten by the bug now and don't feel right going back to Gentoo!
Last edited by mutantpineapple (2009-12-18 12:47:01)update:
by installing using the old packages on the cd rather than downloading the new ones, i was able to get a working system again. however when i did a pacman -Syu the problem returned. through trial and error i found that the problem package is kernel26 (or the modules). for whatever reason, i'm having to stay with 2.6.30 for now. is this a bug with the kernel26 package? -
When running spellcheck with appleworks, my system displayed the message:
the main spell dictionary is not installed
I had this problem before, and went through the steps that worked before (getting rid of Preferences and Recent Items in appleworks). Doing this did not clear the problem.
So, I decided to restart the system to see if that would help. After the restart, the system had the following problems:
1. the dock was reset
2. sticky keys were turned off
3. the username to retrieve mail has been reset.
4. safari hung, so I ran firefox, which got the following messages:
Well, this is embarrassing.
Firefox is having troubles recovering your windows and tabs. This is usually caused by a recently opened webpage.
You can try:
o Removing one or more tabs that you think may be causing the problem
o Starting a new browsing session
(starting a new session worked.)
5. netscape worked.
6. spellcheck within appleworks still doesn't work, but it does work within applications
7.. and most important my keychain seems to be gone, and TimeMachine can't find it. This is a real problem, since I had about 200 entries in my keychain all with unique passwords. I'll have to invoke the forgot my password on each of these sites, assuming I have someway to get my username.
I still can't set up mail to automatically retrieve my mail, but I can manually log onto the server. I know I can manually setup mail to copy the manual login.
BTW, safari is now working; it was a transient problem, maybe related to a problem at my homepage, nytimes.com
Any thoughts? Thanks.You may have a couple unrelated issues going on.
If you recently updated Flash, make sure you've repaired permissions, maybe even twice. I had a similar experience recently with pages that relied on a lot of Flash content - Netscape may not be current enough to have these issues, but Safari, Camino, FF, and Flock all crashed until I repaired permissions twice.
As to AppleWorks...I still use it, but just be aware that support for it could vanish. I'd try to reinstall it first. I would seriously consider making new documents from your AppleWorks files in MS Office, Open Office, Google apps, or some other app of your choice. It's possible that at some point OS X stopped supporting AppleWorks altogether. This is just speculation, but since it hasn;t been updated for years now, it's worth being cautious. -
MAJOR FONT PROBLEM - GREEK FONTS - GREEK SYSTEM
Dear All
I own a G4 purchased from a local Apple Authorized reseller for greece Rainbow computers in order to be able to use Greek fonts. Recently upgraded to OSX Version 10.4.3
However I'm facing major font problems in applications such as Adobe Software i.e CS2
Greek fonts that actually work are very limited. For example in Illustrator only Myriad Pro and Lucida Grande function properly.
In Macromedia Freehand although a few more greek fonts work, they either disappear or become scrambled when I attempt to "Convert them to curves"!
This only applies to OSX Tiger. Panther seemed to be working fine for this, in Freehand.
I work as a graphic designer and it is very frustrating when I'm only limited to very few greek fonts even on a GREEK SYSTEM!!!
By the way: I tried all suggested methods on the forum such as: Greek keyboard layouts, verifying permissions, switching to System Greek Language, reinstalling Illustrator etc..
Is there anything else that i can do?
Pls help.. !I own a G4 purchased from a local Apple Authorized
reseller for greece Rainbow computers in order to be
able to use Greek fonts.
Generally speaking, for problems with Rainbow's stuff you need to consult Rainbow. Apple itself does not produce a localized Greek system or the special add-ons that Rainbow provides to let you use non-Unicode Greek with older apps.
However I'm facing major font problems in
applications such as Adobe Software i.e CS2
Greek fonts that actually work are very limited. For
example in Illustrator only Myriad Pro and Lucida
Grande function properly.
For an app like this you probably need to use Unicode Greek fonts. Those that come with Tiger are Lucida Grande, Helvetica, and Times. If you have MS Office 2004, you can also use Arial and Times New Roman and maybe Verdana from that app. Plus modern Adobe fonts like Myriad or Minion Pro. I suspect that legacy non-Unicode fonts will not work.
In Macromedia Freehand although a few more greek
fonts work, they either disappear or become scrambled
when I attempt to "Convert them to curves"!
I think Freehand is non-Uncode and probably needs the older fonts.
For problems with Adobe and Macromedia apps, you might also want to ask in their forums:
http://www.adobe.com/support/forums/main.html
http://www.macromedia.com/support/forums/ -
Flash Builder 4.5.1 for Mac hanging/crashing during startup "Loading Workbench"
Hello,
I'm having ongoing trouble with Flash Builder 4.5.1 hanging/crashing during startup.
Sometimes the following Terminal command fixes the issue:
cd ~/Documents/Adobe\ Flash\ Builder\ 4.5/cascaded/308971/configuration/.settings
rm org.eclipse.ui.ide.prefs
However this isn't a silver bullet solution, and sometimes the only way is to uninstall and reinstall FB4.5.
But this is a major hassle, especially after 3 or 4 times!
I am running Mac OS X 10.7 and have updated to FB 4.5.1 Premium and also installed Subversion/Subclipse as well as the BlackBerry PlayBook SDK.
Problems seem to occur when working in SVN projects.
I have also noticed that the Delete and Arrow keys and Right Click fails to work sometimes also.
Is there a way to reset / clear FB 4.5 Prefs / Workbench?
Thanks,
David Douglas
Here is the console report below:
/Applications/Adobe/Adobe\ Flash\ Builder\ 4.5/Adobe\ Flash\ Builder\ 4.5.app/Contents/MacOS/Adobe\ Flash\ Builder\ 4.5 ; exit;
!SESSION 2011-09-13 15:07:58.914 -----------------------------------------------
eclipse.buildId=M20100909-0800
java.version=1.6.0_26
java.vendor=Apple Inc.
BootLoader constants: OS=macosx, ARCH=x86, WS=cocoa, NL=en_US
Framework arguments: -keyring /Users/david/.eclipse_keyring -showlocation
Command-line arguments: -os macosx -ws cocoa -arch x86 -keyring /Users/david/.eclipse_keyring -consoleLog -showlocation
!ENTRY org.eclipse.core.resources 2 10035 2011-09-13 15:08:02.101
!MESSAGE The workspace exited with unsaved changes in the previous session; refreshing workspace to recover changes.
!ENTRY org.eclipse.ui 2 0 2011-09-13 15:08:02.905
!MESSAGE Warnings while parsing the commands from the 'org.eclipse.ui.commands' and 'org.eclipse.ui.actionDefinitions' extension points.
!SUBENTRY 1 org.eclipse.ui 2 0 2011-09-13 15:08:02.906
!MESSAGE Commands should really have a category: plug-in='com.qnx.flashbuilder.multiplatform.qnx.ui', id='com.qnx.flashbuilder.multiplatform.qnx.ui.commands.OpenInfoCenter', categoryId='com.qnx.flashbuilder.multiplatform.qnx.ui.commands.category.help'Delete the Adobe Flash Builder 4.5 folder from your Documents (assuming you don't have anything valuable in there). That seemed to work for me, as I don't keep my projects in there but there were some temp files that were breaking it. You'll probably have to re-inport your projects.
Adobe, I'm getting very sick of your (expensive) products wasting my time. -
System Preferences hangs with Mountain Lion
Various parts of system preferences hang under Mountain Lion. Prior to upgrade there was no problem. Any ideas?
I am still having this problem as well. Multiple panes will fail to launch. A reinstallation of ML failed to fix this. I even did a fresh reinstall, manually copying over my Documents, Music, Pictures, and other essential files to a backup drive beforehand. Almost all System Preferences fail to launch. A list of those that fail:
Desktop & Screensaver
Security & Privacy
Notifications
iCloud
Mail, Contacts, & Calendars
Date & Time
Software Update (The only one that seems to extend beyond the preference pane. Software update will not launch, even though I know there are iPhoto and iTunes updates to be downlaoded.)
Dictation & Speech
Time Machine (I really, really, really, really, really want this one to work!)
Startup Disk
Third-party:
Glimmer Blocker (I have let the developer know. There is an update, it does not seem to be working at this time.) -
Hi all,
I have searched through forums, but could not find the solution to my problem:
I have a notebook ASUS with Windows 8 preinstalled.
Yesterday I was doing some housecleaning jobs with some freeware tool (don't remember the name).
Afterwards I have not been able to boot into Windows.
CURRENT SITUATION: When I switch the PC on, after the welcome screen of ASUS and Windows 8 the system goes to a blank screen (no cursor, no mouse, CTRL+ALT+DEL not working).
On next reboot, it does not start automatically the Recovery/Repair procedure and goes through the same steps again. It's not a loop, it just hangs.
Looking into c:\windows\system32\LogFiles\Srt\srttrail.txt I see the following error message at the bottom of the file on the time of my last boot attempt: "Operating system version is incompatible with Startup Repair"
I tried several things without success, so now I want to solve the problems one by one and first thing is to understand what might be causing the "Operating system version is incompatible with Startup Repair" error and how it can be solved.
Thanks for readingHi,
Any update here?
I agreed with the others. First, if we have any backup available to restore Windows 8.1, we may take use of that.
If we don't have any backup available, we'd better contact the manufacturer side for a deeper help.
Or as Janek Fehn suggested, make a clean install of Windows 8, then update to Windows 8.1 again.
Best regards
Michael Shao
TechNet Community Support -
All of a sudden my iMac is taking 45 mins + to boot up!!
I've been reading through the forums trying to find out what the problem might be and resolve it.
It normally gets to the Grey screen with the apple logo and spinning gear then freezes it does eventually boot but after quite a long time.
As I understand it by how far it gets in the boot sequence this might be related to the kernal, but thats where my knowledge end with regards to the kernal.
Heres what I've tried so far:
- Boot from system disk & ran verify & repair on HD and any external drives
- Reset PRAM
- Unplugged all peripherals
- uninstalled recently add 3rd party software
Is there any thing else I might be able to try or do I need to just do a complete clean install?
Any guidance is very much appreciated
I'm running iMac 21.5" Late 2009
1TB HD
8GB DDR3
ATI Radeon HD 4670 256 MB
OSX 10.8.4 (12E55)
ThanksBack up all data immediately, as your boot drive may be failing.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful. -
Sun Java System Application Server8 can not startup (help me )
I work in an japanese compay in China. recently, my JSC can not work
who can help me
the error infomation is :
The Sun Java System Application Server could not start:
Possible reasons:
1.port conflict
2.Incorrect server configuartion
3.corrputed deployed application
my java Studio Creator version: 2004Q2 Update9
I have used this tool for three weeks , in the frist week. everything is ok.
no probroblem happened. in the second week ,sometimes my JSC can not startup, so I restarted my JSC. and it can work again. later, the same problem happened again. when I restarted my JSC , it sill does not work, so I have to restart my computer and it startup successfully,
two days later, the same problem happened again. I restarted my computer , it still did not work. so I have to change my port number in the domain.xml. sometimes it woks well, but sometimes I can't not startup.
in the third week, no matter what I do, the problem can not be solved.
some of my colleagues don't have such problem. but some of them have the same problem. when I run my project on the computer that don't have such problem , it can startup. I don't know why, just a little weird.
till now , no one in our company can tell why this problem happened.
and I believe that anybody who use JSC will encountered this error sooner or later.
who can tell me why will this problem happen? and where can I find some related imformation about this problem. thanks!!!!!!
my domain.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE domain PUBLIC "-//Sun Microsystems Inc.//DTD Application Server 8.0 Domain//EN" "http://www.sun.com/software/appserver/dtds/sun-domain_1_0.dtd">
<!--
Copyright 2004 Sun Microsystems, Inc. All rights reserved.
SUN PROPRIETARY/CONFIDENTIAL. Use is subject to license terms.
-->
<!-- Generated from default-domain.xml.template -->
<domain application-root="${com.sun.aas.instanceRoot}/applications" log-root="${com.sun.aas.instanceRoot}/logs">
<applications>
<j2ee-application enabled="true" location="${com.sun.aas.instanceRoot}/applications/j2ee-apps/MEjbApp" name="MEjbApp" object-type="system-all"/>
<j2ee-application enabled="true" location="${com.sun.aas.instanceRoot}/applications/j2ee-apps/__ejb_container_timer_app" name="__ejb_container_timer_app" object-type="system-all"/>
<web-module context-root="/web1" enabled="true" location="${com.sun.aas.installRoot}/lib/install/applications/adminapp/adminapp_war" name="adminapp" object-type="system-admin">
<!-- System Web Module - DO NOT DELETE! -->
</web-module>
<web-module context-root="/asadmin" enabled="true" location="${com.sun.aas.installRoot}/lib/install/applications/admingui/adminGUI_war" name="admingui" object-type="system-admin">
<!-- System Web Module - DO NOT DELETE! -->
</web-module>
<web-module context-root="/com_sun_web_ui" enabled="true" location="${com.sun.aas.installRoot}/lib/install/applications/com_sun_web_ui" name="com_sun_web_ui" object-type="system-admin">
<!-- System Web Module - DO NOT DELETE! -->
</web-module>
</applications>
<resources>
<jdbc-resource enabled="true" jndi-name="jdbc/__TimerPool" object-type="system-all" pool-name="__TimerPool"/>
<jdbc-resource enabled="true" jndi-name="jdbc/PointBase" object-type="user" pool-name="PointBasePool"/>
<jdbc-connection-pool connection-validation-method="auto-commit" datasource-classname="com.pointbase.xa.xaDataSource" fail-all-connections="false" idle-timeout-in-seconds="300" is-connection-validation-required="false" is-isolation-level-guaranteed="true" max-pool-size="32" max-wait-time-in-millis="60000" name="__TimerPool" pool-resize-quantity="2" res-type="javax.sql.XADataSource" steady-pool-size="8">
<property name="DatabaseName" value="jdbc:pointbase:embedded:ejbtimer,database.home=${com.sun.aas.instanceRoot}/lib/databases"/>
<property name="User" value="pbPublic"/>
<property name="Password" value="pbPublic"/>
</jdbc-connection-pool>
<jdbc-connection-pool connection-validation-method="auto-commit" datasource-classname="com.pointbase.xa.xaDataSource" fail-all-connections="false" idle-timeout-in-seconds="300" is-connection-validation-required="false" is-isolation-level-guaranteed="true" max-pool-size="32" max-wait-time-in-millis="60000" name="PointBasePool" pool-resize-quantity="2" res-type="javax.sql.XADataSource" steady-pool-size="8">
<property name="DatabaseName" value="jdbc:pointbase:server://localhost:9092/sun-appserv-samples"/>
<property name="Password" value="pbPublic"/>
<property name="User" value="pbPublic"/>
</jdbc-connection-pool>
</resources>
<configs>
<config name="server-config">
<http-service>
<http-listener acceptor-threads="100" address="0.0.0.0" default-virtual-server="server" enabled="true" id="http-listener-1" port="28080" security-enabled="false" server-name="" xpowered-by="true">
</http-listener>
<http-listener acceptor-threads="100" address="0.0.0.0" default-virtual-server="server" enabled="true" id="http-listener-2" port="21043" security-enabled="true" server-name="" xpowered-by="true">
</http-listener>
<http-listener acceptor-threads="100" address="0.0.0.0" default-virtual-server="__asadmin" enabled="true" id="admin-listener" port="24848" security-enabled="false" server-name="" xpowered-by="true">
</http-listener>
<virtual-server hosts="sif-caicj" http-listeners="http-listener-1,http-listener-2" id="server" state="on">
<property name="docroot" value="${com.sun.aas.instanceRoot}/docroot"/>
<property name="accesslog" value="${com.sun.aas.instanceRoot}/logs/access"/>
</virtual-server>
<virtual-server default-web-module="admingui" hosts="sif-caicj" http-listeners="admin-listener" id="__asadmin" state="on">
<property name="accesslog" value="${com.sun.aas.instanceRoot}/logs/access"/>
</virtual-server>
</http-service>
<iiop-service client-authentication-required="false">
<orb max-connections="1024" message-fragment-size="1024" use-thread-pool-ids="thread-pool-1"/>
<iiop-listener address="0.0.0.0" enabled="true" id="orb-listener-1" port="23700" security-enabled="false"/>
<iiop-listener address="0.0.0.0" enabled="true" id="SSL" port="21060" security-enabled="true">
<ssl cert-nickname="s1as" client-auth-enabled="false" ssl2-enabled="false" ssl3-enabled="true" tls-enabled="true" tls-rollback-enabled="true"/>
</iiop-listener>
<iiop-listener address="0.0.0.0" enabled="true" id="SSL_MUTUALAUTH" port="21061" security-enabled="true">
<ssl cert-nickname="s1as" client-auth-enabled="true" ssl2-enabled="false" ssl3-enabled="true" tls-enabled="true" tls-rollback-enabled="true"/>
</iiop-listener>
</iiop-service>
<admin-service type="das-and-server">
<das-config admin-session-timeout-in-minutes="60" autodeploy-dir="${com.sun.aas.instanceRoot}/autodeploy" autodeploy-enabled="true" autodeploy-jsp-precompilation-enabled="false" autodeploy-polling-interval-in-seconds="2" autodeploy-verifier-enabled="false" deploy-xml-validation="full" dynamic-reload-enabled="true" dynamic-reload-poll-interval-in-seconds="2"/>
</admin-service>
<web-container/>
<ejb-container cache-idle-timeout-in-seconds="600" cache-resize-quantity="32" commit-option="B" max-cache-size="512" max-pool-size="32" pool-idle-timeout-in-seconds="600" pool-resize-quantity="8" removal-timeout-in-seconds="5400" session-store="${com.sun.aas.instanceRoot}/session-store" steady-pool-size="0" victim-selection-policy="nru"/>
<mdb-container idle-timeout-in-seconds="600" max-pool-size="32" pool-resize-quantity="8" steady-pool-size="0"/>
<jms-service init-timeout-in-seconds="60" type="LOCAL">
<jms-host admin-password="admin" admin-user-name="admin" host="sif-caicj" name="default_JMS_host" port="27676"/>
</jms-service>
<log-service alarms="false" file="${com.sun.aas.instanceRoot}/logs/server.log" log-rotation-limit-in-bytes="2000000000" log-to-console="false" use-system-logging="false">
<module-log-levels admin="INFO" classloader="INFO" cmp="INFO" cmp-container="INFO" configuration="INFO" connector="INFO" corba="INFO" deployment="INFO" ejb-container="INFO" javamail="INFO" jaxr="INFO" jaxrpc="INFO" jdo="INFO" jms="INFO" jta="INFO" jts="INFO" mdb-container="INFO" naming="INFO" resource-adapter="INFO" root="INFO" saaj="INFO" security="INFO" server="INFO" verifier="INFO" web-container="INFO"/>
</log-service>
<security-service anonymous-role="ANYONE" audit-enabled="false" audit-modules="default" default-realm="file" jacc="default">
<auth-realm classname="com.sun.enterprise.security.auth.realm.file.FileRealm" name="file">
<property name="file" value="${com.sun.aas.instanceRoot}/config/keyfile"/>
<property name="jaas-context" value="fileRealm"/>
</auth-realm>
<auth-realm classname="com.sun.enterprise.security.auth.realm.certificate.CertificateRealm" name="certificate">
</auth-realm>
<jacc-provider name="default" policy-configuration-factory-provider="com.sun.enterprise.security.provider.PolicyConfigurationFactoryImpl" policy-provider="com.sun.enterprise.security.provider.PolicyWrapper">
<property name="repository" value="${com.sun.aas.instanceRoot}/generated/policy"/>
</jacc-provider>
<audit-module classname="com.sun.enterprise.security.Audit" name="default">
<property name="auditOn" value="false"/>
</audit-module>
</security-service>
<transaction-service automatic-recovery="false" heuristic-decision="rollback" keypoint-interval="2048" retry-timeout-in-seconds="600" timeout-in-seconds="0" tx-log-dir="${com.sun.aas.instanceRoot}/logs"/>
<monitoring-service>
<module-monitoring-levels connector-connection-pool="OFF" ejb-container="OFF" http-service="OFF" jdbc-connection-pool="OFF" orb="OFF" thread-pool="OFF" transaction-service="OFF" web-container="OFF"/>
</monitoring-service>
<java-config classpath-suffix="${com.sun.aas.installRoot}/pointbase/lib/pbclient.jar${path.separator}${com.sun.aas.installRoot}/pointbase/lib/pbembedded.jar${path.separator}" debug-enabled="false" debug-options="-Xdebug -Xrunjdwp:transport=dt_shmem,server=y,suspend=n,address=creator-14848" env-classpath-ignored="true" java-home="${com.sun.aas.javaRoot}" javac-options="-g" rmic-options="-iiop -poa -alwaysgenerate -keepgenerated -g" server-classpath="${com.sun.aas.javaRoot}/lib/tools.jar${path.separator}${com.sun.aas.installRoot}/lib/install/applications/jmsra/imqjmsra.jar${path.separator}${com.sun.aas.imqLib}/jaxm-api.jar${path.separator}${com.sun.aas.imqLib}/fscontext.jar${path.separator}${com.sun.aas.antLib}/ant.jar">
<!-- various required jvm-options -->
<jvm-options>-client</jvm-options>
<jvm-options>-Djava.endorsed.dirs=${com.sun.aas.installRoot}/lib/endorsed</jvm-options>
<jvm-options>-Djava.security.policy=${com.sun.aas.instanceRoot}/config/server.policy</jvm-options>
<jvm-options>-Djava.security.auth.login.config=${com.sun.aas.instanceRoot}/config/login.conf</jvm-options>
<jvm-options>-Dsun.rmi.dgc.server.gcInterval=3600000</jvm-options>
<jvm-options>-Dsun.rmi.dgc.client.gcInterval=3600000</jvm-options>
<jvm-options>-Xmx512m</jvm-options>
<jvm-options>-Djavax.net.ssl.keyStore=${com.sun.aas.instanceRoot}/config/keystore.jks</jvm-options>
<jvm-options>-Djavax.net.ssl.trustStore=${com.sun.aas.instanceRoot}/config/cacerts.jks</jvm-options>
<jvm-options>-Djava.ext.dirs=${com.sun.aas.javaRoot}/jre/lib/ext${path.separator}${com.sun.aas.instanceRoot}/lib/ext</jvm-options>
<jvm-options> -Djdbc.drivers=com.pointbase.jdbc.jdbcUniversalDriver</jvm-options>
<jvm-options>-Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar</jvm-options>
<jvm-options>-XX:NewRatio=2</jvm-options>
</java-config>
<thread-pools>
<thread-pool idle-thread-timeout-in-seconds="120" max-thread-pool-size="200" min-thread-pool-size="0" num-work-queues="1" thread-pool-id="thread-pool-1"/>
</thread-pools>
</config>
<!-- config model with name "server-config" ends -->
</configs>
<servers>
<server config-ref="server-config" name="server">
<application-ref enabled="true" ref="adminapp" virtual-servers="__asadmin"/>
<application-ref enabled="true" ref="admingui" virtual-servers="__asadmin"/>
<application-ref enabled="true" ref="com_sun_web_ui" virtual-servers="__asadmin"/>
<application-ref enabled="true" ref="MEjbApp" virtual-servers="server"/>
<application-ref enabled="true" ref="__ejb_container_timer_app" virtual-servers="server"/>
<resource-ref enabled="true" ref="jdbc/__TimerPool"/>
<resource-ref enabled="true" ref="jdbc/PointBase"/>
</server>
</servers>
</domain>
my server.log
I am sorry there are some japanese words in the log
�v���I: fatal
����: information
�x��:warning
�R�l�N�V���������������G���[�������������� : error happened when connecting
Starting Sun Java System Application Server Platform Edition 8.0.0_01 (build b08-fcs) ...
[#|2006-02-10T12:59:48.050+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|CORE5076: Using [Java HotSpot(TM) Client VM, Version 1.4.2_06] from [Sun Microsystems Inc.]|#]
[#|2006-02-10T12:59:49.206+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM0020:Following is the information about the JMX MBeanServer used:|#]
[#|2006-02-10T12:59:49.394+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM0001:MBeanServer initialized successfully|#]
[#|2006-02-10T12:59:51.628+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|Creating virtual server server|#]
[#|2006-02-10T12:59:51.659+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|S1AS AVK Instrumentation disabled|#]
[#|2006-02-10T12:59:51.738+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.security|_ThreadID=10;|SEC1143: Loading policy provider com.sun.enterprise.security.provider.PolicyWrapper.|#]
[#|2006-02-10T12:59:53.910+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.transaction|_ThreadID=10;|JTS5014: Recoverable JTS instance, serverId = [100]|#]
[#|2006-02-10T12:59:55.519+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|Satisfying Optional Packages dependencies...|#]
[#|2006-02-10T12:59:55.707+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.resource.resourceadapter|_ThreadID=10;|RAR7008 : Initialized monitoring registry and listeners|#]
[#|2006-02-10T12:59:56.394+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|CORE5100:Loading system apps|#]
[#|2006-02-10T12:59:57.019+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.classloading|_ThreadID=10;|LDR5010: All ejb(s) of [MEjbApp] loaded successfully!|#]
[#|2006-02-10T12:59:57.769+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.ejb|_ThreadID=10;|EJB5109:EJB Timer Service started successfully for datasource [jdbc/__TimerPool]|#]
[#|2006-02-10T12:59:57.769+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.classloading|_ThreadID=10;|LDR5010: All ejb(s) of [__ejb_container_timer_app] loaded successfully!|#]
[#|2006-02-10T12:59:57.816+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0302: Starting Tomcat.|#]
[#|2006-02-10T12:59:57.957+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [adminapp] in virtual server [server] at [web1]|#]
[#|2006-02-10T12:59:58.113+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [admingui] in virtual server [server] at [asadmin]|#]
[#|2006-02-10T12:59:58.113+0800|�x��|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0500: default-locale attribute of locale-charset-info element has been deprecated and is being ignored. Use default-charset attribute of parameter-encoding element instead|#]
[#|2006-02-10T12:59:58.129+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [com_sun_web_ui] in virtual server [server] at [com_sun_web_ui]|#]
[#|2006-02-10T12:59:58.129+0800|����|sun-appserver-pe8.0.0_01|org.apache.catalina.startup.Embedded|_ThreadID=10;|Starting tomcat server|#]
[#|2006-02-10T12:59:58.129+0800|����|sun-appserver-pe8.0.0_01|org.apache.catalina.startup.Embedded|_ThreadID=10;|Catalina naming disabled|#]
[#|2006-02-10T12:59:58.222+0800|����|sun-appserver-pe8.0.0_01|org.apache.catalina.core.StandardEngine|_ThreadID=10;|Starting Servlet Engine: Sun-Java-System/Application-Server-PE-8.0|#]
[#|2006-02-10T13:00:01.285+0800|����|sun-appserver-pe8.0.0_01|org.apache.catalina.startup.ContextConfig|_ThreadID=10;|�A�v���P�[�V������web.xml�����������������A�f�t�H���g�������g�p������ StandardEngine[server].StandardHost[server].StandardContext[]|#]
[#|2006-02-10T13:00:03.191+0800|����|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Coyote HTTP/1.1���|�[�g28080��������������|#]
[#|2006-02-10T13:00:03.254+0800|����|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Coyote HTTP/1.1���|�[�g 28080 ���N��������|#]
[#|2006-02-10T13:00:03.348+0800|����|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Coyote HTTP/1.1���|�[�g21043��������������|#]
[#|2006-02-10T13:00:03.363+0800|����|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Coyote HTTP/1.1���|�[�g 21043 ���N��������|#]
[#|2006-02-10T13:00:03.379+0800|����|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Coyote HTTP/1.1���|�[�g24848��������������|#]
[#|2006-02-10T13:00:03.379+0800|����|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Coyote HTTP/1.1���|�[�g 24848 ���N��������|#]
[#|2006-02-10T13:01:04.883+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.resource.jms|_ThreadID=10;|JMS5035: Timed out after 60000 milliseconds while trying to verify if the JMS service startup succeeded.|#]
[#|2006-02-10T13:01:04.883+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.resource.jms|_ThreadID=10;|JMS5037: Check permissions of MQ instance directory E:\Sun\Creator\SunAppServer8\imq\var\instances|#]
[#|2006-02-10T13:01:04.883+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.resource.jms|_ThreadID=10;|JMS5036: More details may be available in the log file for the JMS service broker instance imqbroker. Please refer to the JMS provider documentation for the exact location of this log file.|#]
[#|2006-02-10T13:01:04.883+0800|�v���I|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|CORE5071: An error occured during initialization
com.sun.appserv.server.ServerLifecycleException: [C4003]: �R�l�N�V���������������G���[���������������B - ���o java.net.ConnectException: Connection refused: connect
at com.sun.enterprise.jms.JmsProviderLifecycle.checkProviderStartup(JmsProviderLifecycle.java:415)
at com.sun.enterprise.server.PEMain.run(PEMain.java:224)
at com.sun.enterprise.server.PEMain.main(PEMain.java:172)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
Caused by: com.sun.messaging.jms.JMSException: [C4003]: �R�l�N�V���������������G���[���������������B - ���o java.net.ConnectException: Connection refused: connect
at com.sun.messaging.jmq.jmsclient.ExceptionHandler.getJMSConnectException(ExceptionHandler.java:233)
at com.sun.messaging.jmq.jmsclient.ExceptionHandler.handleConnectException(ExceptionHandler.java:180)
at com.sun.messaging.jmq.jmsclient.PortMapperClient.readBrokerPorts(PortMapperClient.java:172)
at com.sun.messaging.jmq.jmsclient.PortMapperClient.init(PortMapperClient.java:97)
at com.sun.messaging.jmq.jmsclient.PortMapperClient.<init>(PortMapperClient.java:50)
at com.sun.messaging.jmq.jmsclient.protocol.tcp.TCPConnectionHandler.<init>(TCPConnectionHandler.java:53)
at com.sun.messaging.jmq.jmsclient.protocol.tcp.TCPStreamHandler.openConnection(TCPStreamHandler.java:102)
at com.sun.messaging.jmq.jmsclient.ConnectionInitiator.createConnectionOld(ConnectionInitiator.java:271)
at com.sun.messaging.jmq.jmsclient.ConnectionInitiator.createConnection(ConnectionInitiator.java:107)
at com.sun.messaging.jmq.jmsclient.ConnectionInitiator.createConnection(ConnectionInitiator.java:92)
at com.sun.messaging.jmq.jmsclient.ProtocolHandler.init(ProtocolHandler.java:562)
at com.sun.messaging.jmq.jmsclient.ProtocolHandler.<init>(ProtocolHandler.java:1102)
at com.sun.messaging.jmq.jmsclient.ConnectionImpl.openConnection(ConnectionImpl.java:1741)
at com.sun.messaging.jmq.jmsclient.ConnectionImpl.init(ConnectionImpl.java:588)
at com.sun.messaging.jmq.jmsclient.ConnectionImpl.<init>(ConnectionImpl.java:274)
at com.sun.messaging.jmq.jmsclient.UnifiedConnectionImpl.<init>(UnifiedConnectionImpl.java:33)
at com.sun.messaging.jmq.jmsclient.QueueConnectionImpl.<init>(QueueConnectionImpl.java:32)
at com.sun.messaging.ConnectionFactory.createQueueConnection(ConnectionFactory.java:72)
at com.sun.messaging.jmq.admin.jmsspi.JMSAdminImpl.pingProvider(JMSAdminImpl.java:734)
at com.sun.enterprise.jms.JmsProviderLifecycle.waitForJmsProvider(JmsProviderLifecycle.java:324)
at com.sun.enterprise.jms.JmsProviderLifecycle.checkProviderStartup(JmsProviderLifecycle.java:384)
... 7 more
Caused by: java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
at java.net.Socket.connect(Socket.java:452)
at java.net.Socket.connect(Socket.java:402)
at java.net.Socket.<init>(Socket.java:309)
at java.net.Socket.<init>(Socket.java:124)
at com.sun.messaging.jmq.jmsclient.PortMapperClient.readBrokerPorts(PortMapperClient.java:152)
... 25 more
|#]
[#|2006-02-10T13:01:04.883+0800|�v���I|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|Server Startup failed. Exiting...|#]
[#|2006-02-10T13:01:04.883+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|Server shutdown in progress...|#]
[#|2006-02-10T13:01:04.883+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0303: Stopping Tomcat.|#]
[#|2006-02-10T13:01:04.883+0800|����|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Stoping http11 protocol on 28080 server:type=ThreadPool,name=http28080|#]
[#|2006-02-10T13:01:04.899+0800|����|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Stoping http11 protocol on 21043 server:type=ThreadPool,name=http21043|#]
[#|2006-02-10T13:01:04.915+0800|����|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Stoping http11 protocol on 24848 server:type=ThreadPool,name=http24848|#]
[#|2006-02-10T13:01:05.008+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|CORE5051: Shutting down all J2EE applications ...|#]
[#|2006-02-10T13:01:05.008+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.ejb|_ThreadID=10;|EJB5122:EJB Timer Service shutdown at [2006/02/10 13:01:05]|#]
[#|2006-02-10T13:01:05.008+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|CORE5052: Application shutdown complete.|#]
[#|2006-02-10T13:01:05.008+0800|�x��|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|CORE5061: Exception :
com.sun.appserv.server.ServerLifecycleException: MQ startup failed :[C4003]: �R�l�N�V���������������G���[���������������B - ���o java.net.ConnectException: Connection refused: connect
at com.sun.enterprise.jms.JmsProviderLifecycle.checkProviderStartup(JmsProviderLifecycle.java:364)
at com.sun.enterprise.jms.JmsProviderLifecycle.onShutdown(JmsProviderLifecycle.java:433)
at com.sun.enterprise.server.ApplicationServer.onShutdown(ApplicationServer.java:400)
at com.sun.enterprise.server.PEMain.run(PEMain.java:233)
at com.sun.enterprise.server.PEMain.main(PEMain.java:172)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
|#]
[#|2006-02-10T13:01:05.008+0800|�v���I|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|Server stopped due to Server startup failure.|#]
[#|2006-02-10T13:01:05.024+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=11;|sending notification to server...server|#]
[#|2006-02-10T13:01:05.024+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=11;|Server shutdown complete.|#]
Starting Sun Java System Application Server Platform Edition 8.0.0_01 (build b08-fcs) ...
[#|2006-02-10T13:01:10.743+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|CORE5076: Using [Java HotSpot(TM) Client VM, Version 1.4.2_06] from [Sun Microsystems Inc.]|#]
[#|2006-02-10T13:01:11.728+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM0020:Following is the information about the JMX MBeanServer used:|#]
[#|2006-02-10T13:01:11.868+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM0001:MBeanServer initialized successfully|#]
[#|2006-02-10T13:01:14.634+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|Creating virtual server server|#]
[#|2006-02-10T13:01:14.650+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|S1AS AVK Instrumentation disabled|#]
[#|2006-02-10T13:01:14.665+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.security|_ThreadID=10;|SEC1143: Loading policy provider com.sun.enterprise.security.provider.PolicyWrapper.|#]
[#|2006-02-10T13:01:16.337+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.transaction|_ThreadID=10;|JTS5014: Recoverable JTS instance, serverId = [100]|#]
[#|2006-02-10T13:01:17.603+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|Satisfying Optional Packages dependencies...|#]
[#|2006-02-10T13:01:17.790+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.resource.resourceadapter|_ThreadID=10;|RAR7008 : Initialized monitoring registry and listeners|#]
[#|2006-02-10T13:01:18.462+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|CORE5100:Loading system apps|#]
[#|2006-02-10T13:01:19.025+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.classloading|_ThreadID=10;|LDR5010: All ejb(s) of [MEjbApp] loaded successfully!|#]
[#|2006-02-10T13:01:19.728+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.ejb|_ThreadID=10;|EJB5109:EJB Timer Service started successfully for datasource [jdbc/__TimerPool]|#]
[#|2006-02-10T13:01:19.728+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.classloading|_ThreadID=10;|LDR5010: All ejb(s) of [__ejb_container_timer_app] loaded successfully!|#]
[#|2006-02-10T13:01:19.775+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0302: Starting Tomcat.|#]
[#|2006-02-10T13:01:19.916+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [adminapp] in virtual server [server] at [web1]|#]
[#|2006-02-10T13:01:20.041+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [admingui] in virtual server [server] at [asadmin]|#]
[#|2006-02-10T13:01:20.041+0800|�x��|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0500: default-locale attribute of locale-charset-info element has been deprecated and is being ignored. Use default-charset attribute of parameter-encoding element instead|#]
[#|2006-02-10T13:01:20.041+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [com_sun_web_ui] in virtual server [server] at [com_sun_web_ui]|#]
[#|2006-02-10T13:01:20.056+0800|����|sun-appserver-pe8.0.0_01|org.apache.catalina.startup.Embedded|_ThreadID=10;|Starting tomcat server|#]
[#|2006-02-10T13:01:20.056+0800|����|sun-appserver-pe8.0.0_01|org.apache.catalina.startup.Embedded|_ThreadID=10;|Catalina naming disabled|#]
[#|2006-02-10T13:01:20.150+0800|����|sun-appserver-pe8.0.0_01|org.apache.catalina.c &nHi,
Restarting the computer should have stopped the appserver.
To kill the appserver manually you can go to the command prompt
<install-dir>\Sun\Creator2\SunAppServer8\bin\asadmin.bat\stop-appserv
Thanks,
RK. -
USB modem and Internet Sharing causes system to hang.
First my setup. I have a Mac mini (early 2009) running 10.7.2 connected to the Internet using a Sony Ericsson W910 as a USB modem. I am using Internet sharing via Ethernet to a 1st generation (n) AirPort Extreme to give Wi-Fi to other devices (iPhone, Xbox 360, PS3 etc).
Now the problem: When Internet Sharing is on regardless of what interfaces are used (Ethernet, Wi-Fi, Bluetooth PAN etc) eventually—that word is key—my system will hang. Internet will be unavailable to every device and my Mac itself (but they will still be connected to Wi-Fi) and any app that is running willbeachball. Any app I launch—or try to—will also beachball. I've tried leaving it to see if it will resolve itself —even overnight—but it always requires a hard reset.
The eventually part. I haven't figured out what causes this but I have an idea which I'll explain later. The times this happens is totally random. It has gone days with no problems and other times has happened minutes apart. Usually it's about every 12-24 hours.
It's definitely Internet Sharing which is causing this because when I turn it off I don't have any problems. I've tried every configuration. Only sharing via my mini's Wi-Fi or Ethernet, leaving the AirPort out etc. As soon as I turn on Internet Sharing I've started a countdown to a hang.
On inspecting the Console the last messages before a hang without fail are always:
12/12/2011 06:31:07.000 kernel: 80 80 AppleUSBCDCECMData: getOutputBuffer - Output buffer pool empty
12/12/2011 06:31:07.000 kernel: 80 66 AppleUSBCDCECMData: USBTransmitPacket - Output buffer unavailable
12/12/2011 06:58:58.312 com.apple.usbmuxd: _handle_timer Fish out of water!!!
Repeated hundreds of times. Quick Googling indicates that AppleUSBCDCECMData is a USB driver. Apparently I have version 4.1.15 which appears to be the latest.
I'm aware this is a rare configuration but I believe it affects every USB not just this particular phone.
Is anybody else experiencing this or knows a way to fix it?
Thanks.Thanks Barry.
The hub is on its way to the manufacturer for after sales service...
But the issue with AirPort remains the same, even after resetting SMC.
Some clarification:
* It happens just after computer wakes up from sleep. Restarting solves the problem and the issue doesn't arise until computer goes standby again.
* The whole WiFi card becomes unresponsive. It is not only the Turn Off button, but the whole functionality is stopped. The card can not be activated/deactivated and it doesn't connect to any network. If it is used for internet sharing, clients are unable to connect. -
I bought a new MacBook Pro.
I am running Mac OS 10.7.4 with Firefox 15. Every time I right click or try to use a drop-down menu in Firefox, it causes the entire system to hang, forcing a manual reboot.
No crash reports are available as the Firefox does not actually crash.
I have tried
1.) Starting Firefox in safe mode
2.) Disabling all the add-ons
3.) Resetting Firefox
4.) Removing and re-installing Firefox
5.) Disabling hardware acceleration
The problem still occurs.
This is critical a critical issue as I have been using Firefox's Zotero plugin to write my PhD dissertation which is about 50% complete and now I cannot use Firefox or the Zotero plugin and have about 800 references I do not want to have to manually re-enter!! Also it is preventing me from continuing work on the dissertation as I am unable to insert references, and I have submit this thing by March!!!!Ok, further developments. Still can't get Firefox to work; it makes Lion hang and I have to force a reboot. I tried using terminal to open FF's profile manager, delete my old profile and make a new one. Same problem.
I tried making a new user account in Mac OS, and doing another fresh install of Firefox. It worked! I was able to use drop down menus and right click without crashing the system!
However, as soon as I installed the Zotero plugin... the same issue started occurring again.
Dear programmers, please help me. It will literally take me weeks of work to re-do all of my citations using a different software or manually. There must be a way to fix this problem! -
System freezes(Hangs) if I use Print Button
Hello,
I created few dashboards using SAP xMII.Once I logon to the application, if I press Print button to take the print of the Dashboard screen, System Freezes(Hangs).
Than I have to use Task Manager and kill SAP xMII session thread to close the application.
Did any body came across similar kind of experience or knows about the problem?
Help will be highly appreciated.
Regards
RamanRaman
R using window.print() function for this or wat?
One important thing to remember
<b>A printer friendly page is really just a page with text, no images, graphics, navigation or advertising.
</b>
Regards
Som -
I upgraded my First Gen Macbook to Snow Leopard when it came out. Just recently however, I have started having a problem with system preferences. The first time I open system preferences, it hangs, stalls, and crashes. Once I force quit it, I can launch it normally. So recap:
Launch System Preferences: Hang, Force Quit
Re-Launch System Preferences: Open immediately
A minor annoyance but still an annoyanceYou are not alone friend, I have a 1st gen Macbook Pro, fresh install of Snow Leopard, new user account, NO migration, all updated, and all voodoo done as well (repair permissions, chkdsk, blah blah blah). I have to launch System Preference, watch it hang, force quit, and relaunch successfully. Works that way EVERY time. If I wait too long, I can't open it. Now I open it and just leave it open all day. If I didn't change so many settings so often, I wouldn't care. This entire experience of upgrading to Snow Leopard has sucked. Shame on you Apple.
-
Display on Qosmio F60-10U Turns Mozaic and System Getting Hang
From The Day I purchased F60-10U; i am facing thins problem. My display occasionally Turns into Mozaic and same time System Getting Hang. only thing i can do is restart with power button.
i had given to service center; they told that its because of virus and need to be formatted. as i was 100% sure that its not because of virus; i took back from there.
I had tried below:
1. Update Display Driver
2. Downgrade Display Driver
3. Factory reset
4. Scan for virus with various engines
5. Updated All Drivers
Nothing works...
Anybody else has got same problem?
Hope that i can get some fix for this.
Here is a Picture of Display when its Happens.
Link:[http://www.glowfoto.com/static_image/11-120740L/7879/jpg/09/2010/img4/glowfoto]
Rgrds,
ChintanI dont think this issue has anything to do with virus and I believe graphic card is defective. All you have done is right and after factory image installation virus will be killed and everything should work well.
Contact service again, let them test with factory settings and if the same will happen again I presume they will exchange motherboard.
Maybe you are looking for
-
I just had my macbook pro checked out and all of it's systems restarted to solve its beeping and freezing problem. However, it is still shutting itself down when I close the lid and becoming very hot. When I open the lid again the screen is black an
-
My MacBook came with Apple's DVI to VGA Display Adapter. I tried connecting my Mac to a Dell Monitor using this connection piece but nothing came of it. Do I have to change preferences on my Mac? Is it even compatible (even though the connection fit)
-
Trying to fix my itunes... it keep asking for "itunes.msi" location
ok was trying to update itunes and it got stuck looking for itunes.msi... i have no clue where that file is but now i can't even open itunes. it wont even let me delete and reinstall. please help
-
Having multiple Stored procedure in a single Business Service in OSB
Hi, Please let me know is it possible to have multiple Stored Procedure inside one business service in OSB. Regards, Abdul
-
Mounting FAT32 windows file system
Hello I'm new to solaris. i am using solaris 10 on x86 machine. i'm using 2 hard disks. i installed solaris in one separate hard disk. now i want to mount my windows FAT 32 file system to my solaris.it is installed in another hard disk. any one can h