Major trouble with 20" imac hd might be done for
A few days ago my iMac froze so i powered it down and started it back up. It got to the gray screen with the apple and spinner and sat there all night. I was able to start holding option and get on the windows side but i couldn't get on the mac side. I booted from the cd and tried to verify the hd but disk utility kept spinning looking for a hd to verify. I tried to do an archive and install and when it got to select location it just kept spinning looking fo a hd. I assumed it was doing this because i was using a tiger disc and i have leopard on my imac. The leopard disc i have is an upgrade dvd so i borrowed a friends disc but now i can't boot from the disc and when i hold option the mouse cursor shows up but nothing to select to boot from. I really need help as my phone support is up and my warranty is up in 12 days. Thank you for any help.
That is difficult to say, it depends on how badly the machine is botched. If it's software only then I would think it's fixable in-store however I can't be certain of this. If it's hardware then it will probably be sent out. At any rate you will be without your machine for awhile. You could attempt to fix it yourself however considering the results you have so far I would not recommend this. You have a warranty use it!
Similar Messages
-
I am feeling so ripped off right now. I have wanted a Mac for years and believed the hype about it's stability and I have had more trouble with this Imac 2011 than I have ever had with a pc. It locks up with several software products from APP store. I have already had to have a technician to look at it and really couldn't figure out what the deal was. I was told that the APP store software should give me no problems but the truth is that it locks up on the software. This machine is only 4 weeks old and I am using 37 g on a 1 T hard drive. There is no reason for it to be locking up. Also, when I try to use the help program, it always tells me that I am not connected to the internet even though I have used both the mail program and the browser with no problem just before that. I successfully used the help program on my pc lots of times. I did not need a $2000. plus machine to just get email. I just wanted to unload on somebody that might understand my pain and after checking out this site...I think there is a few of you out there.
I was told that the APP store software should give me no problems but the truth is that it locks up on the software.
The apps downloaded from the Mac App Store are written by third party developers, not Apple. If you have problems with those apps you need to visit the support area for their websites. Launch the App Store, locate the app name. You should see a support link.
when I try to use the help program, it always tells me that I am not connected to the internet even though I have used both the mail program and the browser with no problem just before that
Go to ~/Library/Preferences. Move the com.apple.helpviewer.plist file from the Preferences folder to the Trash. Restart your Mac, try the Help menu.
If you need help finding that file, hold down the Finder icon in the Dock then click: New Finder Window. From the menu bar top of your screen click: Go > Go to Folder. Type this in exactly as you see it here: ~/Library/Preferences/com.apple.helpviewer.plist That will take you right to that file.
(.plist) files stores information about a particular app or in this case, the Help viewer. Often times deleting the .plist file resolves the issue.
It's fine to "unload"... we understand that you expect your iMac to be stable but there are times when things go awry. That's why we have these forums so that you can you get help.
You may want to read up on how to repair the disk if necessary or reintsall Lion > OS X Lion: About Lion Recovery
Apple - Find Out How - Mac Basics
How to "switch" from PC to Mac > Apple - Support - Switch 101
I'm sorry you feel, "ripped off", but you are using the world's most advanced operating system and it may take some time to adjust to a new OS. http://developer.apple.com/technologies/mac/ -
Hi, having trouble with my iMac on startup. Background screen appears, but no icons,
Having trouble with my iMac- on startup, the background screen appears, but no icons. The spinning beach ball appears for quite a long while, then when the icons finally come up, when I open a finder window, the only icons to appear are the Network and Macintosh HD icons. I've tried to repair disk permissions: this came up with heaps of errors, which it then fixed, but the original problem remains.
Any suggestions on how to fix this?
thanksPlease read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Same problem(s) in safe mode?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
I am having trouble with my IMac 27 2006
I am having trouble with my IMac 27 2006 start up OK will run however picture stops, scattered all over screen shutters and then sometimes freezes. Can I reinstall OSX? Or is there a program that dose Fixes?
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
I'm having trouble with my iMac viewing youtube video's ? Even loaded?
I'm having trouble with my iMac viewing youtube video's ? Even loaded?
I believe so. I was using safari and just switched to firefox which asked me to download the new version of flash which I did and it works better, not perfect, but better.
thanks -
Trouble with Safari 6.0.5. Works for a few minutes then locks up in all tabs (wheel spinning). Chrome & Firefox work fine. Using OSX 10.8.4. Wonder if I downloaded plugin causing this? Please help.
Yes, a plugin or an extension either one...
From your Safari menu bar click Safari > Preferences then select the Security tab.
Deselect: Allow all other plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
If it's not a plug-in issue, select the Extensions tab. If there are any extensions installed, turn that OFF, quit and relaunch Safari to test. If that made a difference, uninstall one at a time, quit and relaunch Safari to test until you find the culprit. -
My Macbook pro is syncing (I don't know how really!) with my iMac automatically and I don't know how it is.
The info it's importing is wrong. What is going on?It's syncing my iCal calenders. But it's putting different calendars information into other calendars. I look at my calendars basically color coded and the same multiple informaion is in wrong calendars. Understand?
-
I recently got a new iMac (27") and I am having an ongoing problem with wifi connection. It should be noted that other Apple devices -- iPad, iPhone, MacPro laptop, and Apple TV -- do not seem to have any trouble. Nor did my old Mac Pro. But the iMac connection keeps dropping. I have researched this issue in the Apple Support Forum and followed much of the advice, e.g. establishing a new connection identity, adjusting the DNS. While these solutions seemed to work for a while it wasn't long before the problem returned. I have rebooted both the computer and the modem numerous times (it is a DSL connection, BTW). Those actions also seem to help for a while but sometimes they don't help at all.
Since I transferred data from my old Mac Pro I have wondered if I have a preference or permissions issue. I know how to delete preferences when software acts up and that has sometimes been very helpful. But I don't know how to accomplish a similiar fix with the wifi.
Software is up-to-date and I have not encountered any other problems with the iMac.
Thanks.
AliceThe warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies. -
Major Trouble with Latest iTunes versio9n
I have two major problems with the latest version of iTunes, which I was forced to download to purchase a TV Show I wanted.
1) I've lost 95% of the TV shows previously downloaded on my iPod (they are still in my library, which "library" has also disappeared on my iTunes). I haven't had time to see if songs that I purchased with previous versions of iTunes are still there as they are many!
2) Download time for TV shows is 5 HOURS!!!!! This is unacceptable when the time was a fraction of that before.
I replied to a couple of related and unanswered posts, but thought it would be better to post my own.
I have tried to restore my iPod AND change the drive letter for it in Windows as suggested in previous, related posts and that didn't work.
Can one of our solution providers out there help me? I travel and there are some of the TV Shows that disappeared that I hadn't watched yet.
Thank you!!!Andy
I have been using Explorer throughout, but you sparked an idea, there.
So I tried it using Chrome. I managed to get iTunes64setup.exe downloaded, but try as I might, it will not run.
Any further suggestions are welcome. -
Hai there. i am having a trouble with the garage band apple loops to get into my macbook pro. . i had it some time back and i dont know where it has gone and how it get it back. is there anyone to help me to get the loops back into the browser . i will be grateful to you if some one can help me with it/ thanks.
First check, if you do not accidentally have hidden or filtered your loops:
Uncheck the "Filter for more relevant results" option in the Audio tab of the GarageBand Preferences.
And the drop down menu on top of the Loop Browser should be set to "Loops", not to some Jam Pack or other collection.
If you still don't see any loops, check if you have set your project to a special signature, like 9/8, for that no standard loops do exist.
Then check, if any loops actually are installed in your system Library: Depending on your GarageBand version you should find the standard loops in the Audio folder of your system Library (Application Support > GarageBand):
Your System Drive > Library > Audio > Apple Loops
If the Loops are installed, but GarageBand does not show them, you need to rebuild your Apple Loops Index: See the FAQ for how to do it:
Re-Index GarageBand's Loops
This requires two steps:
erase the old Apple Loops Index by deleting everything in
Your System Drive > Library > Audio > Apple Loops Index
and then rebuilding the Loops Index by dragging the folder containing all of your loops onto the Loop Browser in GarageBand.
If no Loops are installed in your Library, you will have to restore them from your Backup.
Regards
Léonie -
Troubles with the creation of New Custom Adapter for NW 7.1
Hi guys !!!
I have some troubles with the creation of a new custom adapter for NW 7.1. I have followed some pdf and notes, like :
[Upgrade an SAP NetWeaver PI 7.0 Adapter to SAP NetWeaver PI 7.1|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0667f56-96c7-2b10-0e9a-c40fbd523f4d]
note : 1004000
I have all the materials to make the custom Adapter ( like file .sca with all .rar and .sda , like file sample_ra.rar with all the file .java, like all the libs for the projects ) and I have make it !!! But, when I try do deploy it, i recieve a warning that i don't understand, this is the warning :
S U M M A R Y
~~~~~~~~~~~~~~~~~~~
Successfully deployed: 0
Deployed with warnings: 1
Failed deployments: 0
~~~~~~~~~~~~~~~~~~~
1. File:C:Users
maienzaDesktopCreazione del SDAPI71_AF_myFirstCustomAdapter_ver_2.0.sda
Name:PI71_AF_myFirstCustomAdapter_ver_2.0
Vendor:sap.com
Location:SAP AG
Version:7.1007.20090310105326.0000
Deploy status:Warning
Version:NEW
Description:
1. Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
[ERROR CODE DPL.DS.6193] Error while ; nested exception is:
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5082] Exception while validating application sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0.
No one of the [EJBContainer] containers, which processed it, returned deployed component names.
The registered containers in this moment were [CTCContainer, com.sap.caf.um.metadata, com.sap.security.ume, com.sap.security.login-modules, app_libraries_container, Cache Configuration Upload, servlet_jsp, dbcontentcontainer, connector, Cluster File System, JMSConnector, MigrationContainer, Monitoring Configurator, dbschemacontainer, appclient, orpersistence, PortalRuntimeContainer, JDBCConnector, EJBContainer, metamodelrepository, webservices_container, scheduler~container, ConfigurationsContainer, Content Container].
Possible reasons :
1.An AS Java service, which is providing a container, is stopped or not deployed.
2.The containers, which processed it, are not implemented correct. They deployed or started initially the application, but didn't return deployed components in the application deployment info.
at com.sap.engine.services.deploy.server.utils.ValidateUtils.missingDCinDIValidator(ValidateUtils.java:80)
at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:149)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
at com.sap.engine.services.dc.cm.deploy.impl.LifeCycleManagerStartVisitor.visit(LifeCycleManagerStartVisitor.java:34)
at com.sap.engine.services.dc.cm.deploy.impl.DeploymentItemImpl.accept(DeploymentItemImpl.java:83)
at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcessLCMDeplItem(DefaultDeployPostProcessor.java:80)
at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcess(DefaultDeployPostProcessor.java:56)
at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doPostProcessing(DeployerImpl.java:741)
at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.performDeploy(DeployerImpl.java:732)
at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doDeploy(DeployerImpl.java:576)
at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:270)
at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:192)
at com.sap.engine.services.dc.cm.deploy.impl.DeployerImplp4_Skel.dispatch(DeployerImplp4_Skel.java:875)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
Result
Status:Warning
I have see in the nwa if there are some applications or services that are stopped but all the necessary it's started, just one question : in the pdf for upgrade from 7.0 to 7.1 no one speaks about ejBean or about a creation of it ... it's necessary an ejBean ?? Beacause in the file .sda of the file .sca that i have downloaded there are more of the adapter with ejBean ....
AntonelloHi,
the adapter metadata it's been created but my service is still stopped; when I try to start it, in the NDWS -> Deploy view -> tab Repositary view, I receive this errors, one after the other, cause I try to start it 3 times and in each time I received 3 differents errors :
Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
[ERROR CODE DPL.DS.6193] Error while ; nested exception is:
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.container.DeploymentException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/applicationjars
at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:893)
at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl.makeStartInitially(ContainerInterfaceImpl.java:771)
at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.makeStartInitially(StartInitiallyTransaction.java:184)
at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:145)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
Caused by: com.sap.engine.services.ejb3.container.ActionException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/applicationjars
at com.sap.engine.services.ejb3.container.FSMakeFolder.perform(FSMakeFolder.java:48)
at com.sap.engine.services.ejb3.container.CompositeAction.perform(CompositeAction.java:81)
at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:887)
... 30 more
Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
[ERROR CODE DPL.DS.6193] Error while ; nested exception is:
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.container.DeploymentException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/jars
at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:893)
at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl.makeStartInitially(ContainerInterfaceImpl.java:771)
at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.makeStartInitially(StartInitiallyTransaction.java:184)
at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:145)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
Caused by: com.sap.engine.services.ejb3.container.ActionException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/jars
at com.sap.engine.services.ejb3.container.FSMakeFolder.perform(FSMakeFolder.java:48)
at com.sap.engine.services.ejb3.container.CompositeAction.perform(CompositeAction.java:81)
at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:887)
... 30 more
Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
[ERROR CODE DPL.DS.6193] Error while ; nested exception is:
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5082] Exception while validating application sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0.
No one of the [EJBContainer] containers, which processed it, returned deployed component names.
The registered containers in this moment were [CTCContainer, com.sap.caf.um.metadata, com.sap.security.ume, com.sap.security.login-modules, app_libraries_container, Cache Configuration Upload, servlet_jsp, dbcontentcontainer, connector, Cluster File System, JMSConnector, MigrationContainer, Monitoring Configurator, dbschemacontainer, appclient, orpersistence, PortalRuntimeContainer, JDBCConnector, EJBContainer, metamodelrepository, webservices_container, scheduler~container, ConfigurationsContainer, Content Container].
Possible reasons :
1.An AS Java service, which is providing a container, is stopped or not deployed.
2.The containers, which processed it, are not implemented correct. They deployed or started initially the application, but didn't return deployed components in the application deployment info.
at com.sap.engine.services.deploy.server.utils.ValidateUtils.missingDCinDIValidator(ValidateUtils.java:80)
at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:149)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304) -
I have trouble with my computer accepting an audio CD that I want to download to ITunes. It will remain in the computer for 10 - 15 seconds before ejecting it and not allowing me to download. My ITunes is open. Why does this happen or what am I doing wrong? I have done this dozens of times before. What makes this different and does it have anything to do with recent upgrades?
I'm not sure? I'm new to lightroom and it's lightroom 5 that I'm using. What is happening is I go to develop the picture in the developing section in lightroom and it gives me this message that says " Develop module is disabled Please purchase a license to reactivate the develop module." I shouldnt have to do anything else after already buying the cd and downloading it initially. It's already paid for? I'm so confused!!
why is the adobe lightroom 5 asking me to keep downloading the CD I bought at Best Buy store. I have already bought the CD and downloaded it on my computer but for some reason it gives me 10 days a then I have to download it again!!! Why is this its so an -
Having trouble with Dreamweaver and fireworks willing to pay for support
I'm new to the forum and i was hoping to get some help with
dreamweaver and fireworks.
I built a site on my own using dreamweaver 3 years ago but
have forgotten almost everything. I am planning on building a new
web site and have been messing with dreamweaver for over a week
trying to figure it out, with little success. I bought a web
building package years ago that included fireworks, dreamweaver,
freehand and maybe more, but i lost my books on dreamweaver and
fireworks somehow.
Anyways, I was trying to learn dreamweaver 3 and fireworks
and was having a lot of trouble with it. The dreamweaver bible
assumes you know how to make a navigation bar using fireworks and
that simply isnt the case for me. So I need help with that.
Also, i have been having trouble with my template. This is
how you save your basic page correct? For some reason it doesnt
save the whole page for me. I figured out the editable regions
part, I think, but since i didnt know how to make a navigation bar
I made my own links out of text, and this part isnt saving with the
template.
I have a lot more questions but i think ive taken enough of
your time. I am willing to pay someone to help me build this site,
i cant afford a lot but i think my questions are pretty basic.
ThanksThere is a recent thread on the FW forum that may interest
you - it's called
"Firworks and HTML". The advice there applies in your case,
too.
One problem with your use of DW3 is this -
the browser world has changed quite a bit in the almost 10
years since DW3
was released. Some (many?) of the behaviors in DW3 simply
won't work any
more because of these (significant) changes. Are you
absolutely locked into
using DW3?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"jfmalewitz" <[email protected]> wrote in
message
news:[email protected]...
> I'm new to the forum and i was hoping to get some help
with dreamweaver
> and
> fireworks.
> I built a site on my own using dreamweaver 3 years ago
but have forgotten
> almost everything. I am planning on building a new web
site and have been
> messing with dreamweaver for over a week trying to
figure it out, with
> little
> success. I bought a web building package years ago that
included
> fireworks,
> dreamweaver, freehand and maybe more, but i lost my
books on dreamweaver
> and
> fireworks somehow.
> Anyways, I was trying to learn dreamweaver 3 and
fireworks and was having
> a
> lot of trouble with it. The dreamweaver bible assumes
you know how to make
> a
> navigation bar using fireworks and that simply isnt the
case for me. So I
> need
> help with that.
> Also, i have been having trouble with my template. This
is how you save
> your
> basic page correct? For some reason it doesnt save the
whole page for me.
> I
> figured out the editable regions part, I think, but
since i didnt know how
> to
> make a navigation bar I made my own links out of text,
and this part isnt
> saving with the template.
> I have a lot more questions but i think ive taken enough
of your time. I
> am
> willing to pay someone to help me build this site, i
cant afford a lot but
> i
> think my questions are pretty basic.
> Thanks
> -
I have just handed my old iMac G5 to my wife after having purchased myself a new iMac. I've used Macs for 20+ years and the problem she's now having with my old iMac is the very first time I've encountered any hassles at all with Macs.
I am having major issues even booting the iMac. On the rare occasions it gets passed the Apple icon it now encounters a gray screen telling me to restart. And several times it will post a message eg:
System Failure: cpu=0; code=00000009 (Invalid pmap)
Latest crash info for cpu 0:
Exception state (sv=0x3661d000)
PC=0x000A7FD0; MSR=0x02003000; DAR=0xFFFC521; DSIR=0x00200000; LR=0x000A7F4C; R1=0xFC008091; XCP=0x00000098 (System Failure)
backtrace terminated - unaligned frame address: 0xFC008091
and it goes on for quite a few more lines.
Can anyone suggest a plan of action? Offer ideas as to what is suddenly going on?Hey there.
I know I should probably post elsewhere, however, I'm short on time for a project. I've got my 17" G4 powerbook. Lately, I've been getting the dreaded black "you must restart your computer..." screen. I changed the HD several months ago, and have had no problems. Would formatting the drive to anything? I ran Disc utilities from the install disc, same deal. I tried to do the software upgrades to see if that might be something, but it goes to the black screen to quick. Any suggestions? Thanks for any help, and sorry for short stepping. Thanks, Rich -
Troubles with my iMac, it won't "start"
Wow.
So where do I begin..
In feb 2005 I bought a iMac G5 20". Since the day I bought it, it has run fine, like a charm.
2 months ago when I returned from a trip, it wouldn't start as it was supposed to. The troubles I got was:
(the boing sound always apears, just FYI)
First few times the screen was fubar (imagine TV-"ant war"-static, but horizonal and in color over the entire screen).
After a while that turned into just a grey screen followed by the fans going berzerk a few times.
I booted from the Install disk and used Disc Utils to see what's up and to run recovery or something like that. Disc utils didn't find the Harddisk. I got freaked and restarted it, and somehow, the computer worked again (I was like "?!")
Now yesterday, I shut the computer down again (dunno why, felt like it should have a good nights sleep or something).
When I started it this morning, I got static-image-ant-war-in-color thing again for a few restarts.
Then I got the following things totally random on boots
- Screen turned into only grey
- Screen grey with apple logo
- Screen turned into a slightly lighter grey
After a few 10-100 boots and running boot with install disk (and not finding the harddisk), I get a new boot error, yes, the old os9 icon with a questionmarked folder.
This lead me to believe that it's the Harddisk that's "broken". But when I run the Hardware Test CD was delivered with the mac, it give me this right after the "Boing"-sound:
INVALID MEMORY ACCESS AT
%SRR0: 00000000.00032ed8
%SRR1: 10000000.00003030
And then asks me if I want to shutdown or continue booting. Shutdown shuts it down, and the continue leaves me with a screen with the color sand/orange'ish.
I'm cluless on what to do now.. more or less.
I've tried:
Reseting the PRAM = Did nothing for me
Ripping all the cables out for +1 minute = Nothing changed
Starting it in FW-mode hooked up to my eMac = Didn't work, eMac can't see it.
Open the iMac and remove RAM and ripout/reinsert the HDD-cables = Nothing
Any more sugestions ?
Oh, I talked to the guys that sold it to me, and I still have warranty and this should cover it, but I REALLY need to run some backups and remove NDA-stuff.Status update:
I just let the computer run for a good 30 minutes.
First grey screen, then after a while the questionmark-folder, then after 20-25 minutes, the grey with logo and spinning wheel.. and after that, it loaded..
weird eh ?
So now I'm moving everything over to FW-disks and doing a clean install and then turning the thing off hoping to be able to recreate this error tomorrow in order to be able to leave it at the repair-guys,
Here's hoping !
Maybe you are looking for
-
Hi all, Can anyone give me the action script to load wmv movie in flash window. Saxena
-
List Region with Dynamic Table name
Trying to build a page that is similar to Query Builder. On the left side of my page, I need to populate a list of table names from a SQL statement. Once the list is created, will need to perform some addtional actions when user clicks onthe specific
-
I have used Captivate once, on a trial basis, some many months ago. At the time I purchased the subscription (valid still) and worked with it a few times. I have only returned to it recently and the program will not launch. The icon appears in my Mac
-
How to user jdbc visit oracle object type function?
1ãcreate oracle object create type cocotestparam1 as object (id number, name varchar(10) 2ãadd function to object alter type cocotestparam1 add member function test1(t number) return member; 3ãcreate object body create type body cocotestparam1
-
When I double click a tiff or jpg the file opens in "Preview" not PS. What is wrong. Can anyone help please?