Major upgrade, any issues?

Our studio is about to under take a major upgrade with machines and software. We're upgrading our macs from G4's to intel G5's and the software from CS2 to CS4.
Are there any issues? I've heard there is a major issue regarding fonts?
Thanks in advance.
Chris

chris,
The only "major issue" you have with fonts (standard Type 1, TrueType or OpenType) is incorrect installation, duplicate activation, or corrupted fonts.
The only "common" exceptions that come to mind involves Eras and Optima if you have their original Type 1 versions dating back to the 1980s. Or if you acquire questionable fonts from less-than-stellar foundries.
Neil

Similar Messages

Preparing for 3.3(4) to 4.2 Upgrade - Any issues?

We are preparing to upgrade ACS from 3.3(4) to 4.2 and are wondering if there are any gotchas we should look out for? We've upgraded in the lab and things look ok, but we are limitted to what we can test aganst in the lab. We have 300+ different device types/code rev combinations (mostly Cisco TACACS+, a few Radius) and are wondering if there are any known issues where a certain rev of code (IOS, CatOS) works with 3.3(4) but not 4.2.
thanks in advance
Bob

Haven't heard of any yet on 4.2
Regards,
Prem

10.7.5 and mainstage 2.2.2 - Any issues before I upgrade?

Going from 10.7.3 to 10.7.4 was a nightmare, so I had to go back to 10.7.3. I am wondering if I should upgrade to 10.7.5
Any Issues?

In my experience, mainstage 2.2.2 is as stable as 2.2.1 on both lion and mountain lion. The only caveat is that I have had significant problems since 2.2.1 with a specific AU (my main piano sound, worse luck) with is Truepianos. Something changed in mainstage and I get major CPU spiking causing audio dropout during performances. However I have a duel core mackbook pro and reports are that this is limited to these machines.

Since upgrading to Yosemite on my iMac, My Mail app refuses to open, Safari won't load, and I can't upload pictures from my iPad... Please help, any ideas very welcome. I've had my iMac since 2011, and have never had any issues to deal with before..

Since upgrading to Yosemite on my iMac: My Mail app refuses to open, Safari won't load, and I can't upload pictures from my iPad...
Please help, any ideas very welcome. I've had my iMac since 2011, and have never had any issues to deal with before..
Thanks

29/11/2014 20:17:01.315 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
29/11/2014 20:17:37.013 com.apple.backupd[616]: Finished scan
29/11/2014 20:17:43.108 com.apple.backupd[616]: Saved event cache at
/Volumes/Time Machine Backups/Backups.backupdb/Geoff Lambrechts’s iMac
(2)/2014-11-29-200648.inProgress/9B453663-603F-40B8-AC21-24F05C724E15/.6162AD34- 38F8-30AB-98E0-4A22FB9D311F.eventdb
29/11/2014 20:17:43.207 com.apple.backupd[616]: Not using file event
preflight for Macintosh HD
29/11/2014 20:18:01.561 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
29/11/2014 20:18:16.288 com.apple.xpc.launchd[1]:
(com.apple.quicklook[715]) Endpoint has been activated through legacy
launch(3) APIs. Please switch to XPC or bootstrap_check_in():
com.apple.quicklook
29/11/2014 20:18:23.705 com.apple.SecurityServer[56]: Session 100013 created
29/11/2014 20:18:32.046 mdworker[718]: code validation failed in the
process of getting signing information: Error Domain=NSOSStatusErrorDomain
Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
29/11/2014 20:19:01.662 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
29/11/2014 20:19:45.458 com.apple.xpc.launchd[1]:
(com.apple.imfoundation.IMRemoteURLConnectionAgent) The
_DirtyJetsamMemoryLimit key is not available on this platform.
29/11/2014 20:19:59.123 com.apple.xpc.launchd[1]:
(com.apple.PubSub.Agent[725]) Endpoint has been activated through legacy
launch(3) APIs. Please switch to XPC or bootstrap_check_in():
com.apple.pubsub.ipc
29/11/2014 20:19:59.123 com.apple.xpc.launchd[1]:
(com.apple.PubSub.Agent[725]) Endpoint has been activated through legacy
launch(3) APIs. Please switch to XPC or bootstrap_check_in():
com.apple.pubsub.notification
29/11/2014 20:20:01.138 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:21:01.484 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:21:13.430 com.apple.backupd[616]: Found 4529 files (1.1 GB)
needing backup
29/11/2014 20:21:18.786 com.apple.backupd[616]: 2.82 GB required (including
padding), 1.24 TB available
29/11/2014 20:21:31.775 Console[734]: Failed to connect (_consoleX) outlet
from (NSApplication) to (ConsoleX): missing setter or instance variable
29/11/2014 20:21:34.230 WindowServer[162]: disable_update_timeout: UI
updates were forcibly disabled by application "Console" for over 1.00
seconds. Server has re-enabled them.
29/11/2014 20:21:36.898 WindowServer[162]: common_reenable_update: UI
updates were finally reenabled by application "Console" after 3.67 seconds
(server forcibly re-enabled them after 1.00 seconds)
29/11/2014 20:21:36.971 coreservicesd[83]: SFLEntryBase::ListHasChanged
mach_msg returned 10000004d
29/11/2014 20:22:01.817 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:23:02.170 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:24:02.547 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:25:02.168 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:02.233 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:02.236 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:02.284 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:03.059 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:25:12.674 com.apple.xpc.launchd[1]:
(com.apple.imfoundation.IMRemoteURLConnectionAgent) The
_DirtyJetsamMemoryLimit key is not available on this platform.
29/11/2014 20:26:03.464 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:27:03.841 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
On 29 November 2014 at 19:29, Apple Support Communities Updates <

I have a MacBook 5,1 (13.3" aluminum from 2007 or 2008). Automatic updates will only let me get to OSX 10.5.8. Can I upgrade to Snow Leopard, Lion 10.6 or even 10.6.8? Also, will I have any issues with my iPhone if it's updated to iOS 7.1?

I have a MacBook 5,1 (13.3" aluminum from 2007 or 2008). Automatic updates will only let me get to OSX 10.5.8. Can I upgrade to Snow Leopard, Lion 10.6 or even 10.6.8? Also, will I have any issues with my iPhone if it's updated to iOS 7.1?

The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. You will need to be running 10.6.8 to access the App Store to order Lion or Mountain Lion. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
System Requirements for 10.6:
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible internet service provider: fees may apply.
You can upgrade direct from 10.6.8 to 10.8 Mountain Lion without going through 10.7 Lion with the Late 2008 model 5,1 Aluminum Unibody. The Model 5,1 will probably run 10.9 Mavricks when it comes out.
10.8 Mountain Lion is a download from the App Store, the price is $19.99.
Mountain Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
As for third party programs see this list for compatibility with 10.8 http://roaringapps.com/apps:table
Also Mountain Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Mountain Lion.
Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

Hi to All, My wife still has ios 6 on her ipad (she likes the look). I will do the 7.1 upgrade when it is released. Should there be any issues going from 6 directly to 7.1? Thanks!

Hi to All, My wife still has ios 6 on her ipad (she likes the look). I will do the 7.1 upgrade when it is released. Should there be any issues going from 6 directly to 7.1? Thanks!

There shouldn't be. I went from iOS5.whatever to iOS6.1 with no issues.
Just make sure to back everything up before you do it, just in case all doesn't go as planned.
I always do mine the old fashioned way, download the full OS via iTunes so if you've already got it linked to a computer and been using iTunes to do updates/syncing that's how I'd suggest you do it.

Hi, I have a mid 2007 24inch iMac currently running on 10.5.8. Can I upgrade directly to 10.7 and if so, can I expect any issues? Thanks

Hi, I have a mid 2007 24inch iMac currently running on 10.5.8. Can I upgrade directly to 10.7 and if so, can I expect any issues? Thanks

You need to have a copy of Snow Leopard installed to access Lion in the Mac App Store. There's no direct path to upgrade from Leopard to Lion.
I did read a piece earlier this week about Apple giving free copies of Snow Leopard to new iCloud subscribers, you might want to look into this here:
http://www.macgasm.net/2012/04/18/apple-now-giving-away-snow-leopard-to-mobileme -customers-for-free/
Hope this helps.

Public Sector: Will this have any issues during Siebel upgrade?

Hello,
We are using Siebel Public Sector application (Case Management) in our product.
Every contact who is Primary under a Contact will be associated to a Master Case. If there is no master case associated with primary contact, siebel will create a new master case. In other words, Contact to Master Case is 1:1 relationship.
We are in the process of developing a new requirement where in a Contact can be linked to one or more Master Cases (1:M). Since this is deviates Siebel OOB feature we do not want to change it.
Instead, we have created a new custom stand-alone Table (which mimics OOB Master Case columns) and a "New Custom BC".
Created a link betwen Contact BC and New Custom BC (Id -> Par Row Id).
In "New Custom BC", field called "Master Case Number" has a dynamic picklist based on OOB "PUB Master Case" BC.
For other field we have mapped using pickmaps.
Our requirement is met but our only question is "Will this have any issues during Siebel upgrade?"
Quick responses will be very helpful.

Thank you for your reply. I only see three versions of Adobe Reader available for Windows XP SP3 at the Adobe site
http://get.adobe.com/reader/otherversions
In doing some research, it seems there were some issues if you skipped an update but I did not find any information (only other queries) as to my original question of compatibility. Also, how can we access the older file if it won't open in 10.1.2?
Can I load 10.1.2 in addition to their older version to check and see what will or will not open correctly before I uninstall the older version? I don't want to load the new version and then have them not be able to access a needed file...

VCD suite upgrade from 5.5 to 5.8, any issues?

Hello
Has anyone done the vCD suite upgrade from 5.5 to 5.8?
Did you encounter any issues during this event?
Any tips and tricks you can share are helpful.
Regards
/Tony

Please refer VMware vCloud Suite 5.8 Release Notes to be aware of the known issues.If you have any specific concerns please do let know.

Any Issues Upgrading from Word 2003 to 2007?

Hello. We have the option in my department to upgrade from
Word 2003 to Word 2007. My team still has some help projects in
RoboHelp for Word. Before we decide to upgrade, I was wondering if
anyone else using RoboHelp 7 (for Word) has upgraded to Microsoft
Word 2007, and if they have encountered any issues. Thanks for any
input.

Thanks for all the helpful feedback, everyone. Here's an
update, just fyi. I loaded Office 2007 today, and seem to be
encountering one of the issues described by David Hurlston. When I
try to create a new popup, it takes a little over one minute for
the Insert Popup window to appear. Then when I select the topic to
which I want to link and click OK, it takes another 10 seconds or
so for the link to appear.
I also received the "Microsoft Office Word has encountered a
problem and needs to close" error five times in the past hour, when
just trying to add new topics. I ran Microsoft Office Diagnostics,
and it was unable to diagnose the cause of the crash. I'm using
RoboHelp for Word 7.0, Build 7.02.001. (I have the full Adobe
Technical Communication Suite with all of the latest updates
installed, and just loaded Office 2007 today, along with all of the
latest Windows and Office updates.)
This is the perfect time for our team to upgrade to Office
2007 since we're at the very beginning of a release, so I'm going
to continue testing to see if I can figure out why it's a bit
sluggish and why it's crashing. I just wanted to follow up on my
original post in case any of this info is helpful.
On a semi-related note... I'm usually pretty good about
finding my way around in new user interfaces, but it took me about
ten minutes to figure out how to access the Insert Popup window
(due to the new Word UI). If anyone knows of a handy reference
guide for people upgrading to RoboHelp for Word 2007, let me know.
I checked the LiveDocs for RoboHelp for Word, but the version I
found currently contains the old icons I'm used to. (I'm hoping to
find some type of quick reference that explains where to find
things that have moved and/or changed icons. I found a great
interactive tool on Microsoft's site, but it seems to be specific
to Word docs, without addressing the RoboHelp-specific options.)
Thanks again for all the input!

Any issues upgrading to Maverick from OS 10.6.8 on a MacBook?

Any issues upgrading to Maverick from OS 10.6.8 on a MacBook?

Model Name:          MacBook
Model Identifier:          MacBook5,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2 GHz

Any issue upgrading to Mountain Lion on a 15 inch MBP

I haven't upgraded to Mountain Lion yet and I'm considering doing it. Any issues I should know about? I have a Mid 2010 MBP 15 inch. Thanks!

Not really.
Repair the hard drive and permissions.
Make a cloned backup using Disk Utility.
Purchase and download Mountain Lion.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

OSX Mavricks - Any issues with Adobe CS?

Just wondering if anybody has been using Mavricks at all and if there are any issues with Adobe CS at all.

Okay, well I can give a good report on this since I installed Mavericks today and am working with InDesign CC...which, as we all know, already has slowness issues. Well, last I tried to do a simple upgrade to Mavericks and was not able to do it! Seems like the Apple Gurus formatted my hard drive in a way they were *not* supposed to when I had them replace the hard drive at the end of last year, after a hard drive recall for the iMac 27"'s...grrr...THANKS Apple Gurus! So I ended up having to wipe the drive before being able to install Mavericks....then imported all my data over and it worked GREAT! (First time I have done this since I used to always prefer a clean insteall and installing everything from scratch but just did NOT have the energy or will to do it this time around! I was IMPRESSED and all worked well!
And now on to the nitty gitty of my post....long story short, everything worked well EXCEPT for InDesign CC which was slooower than EVER. Before the upgrade, I had gotten it to a point where it was ACCEPTABLE to work in speedwise. But now every little keystroke had a HUGE lag...even selecting a tool from the toolbar would take forever. And typing or selecting text....forget it I wanted to put my head in my arms and cry my heart out. I am in the middle of some huge projects and need to get them done.
And yes, I KNOW...I KNOW...I should NOT be doing something so risky as updating my OS when I have so much work to do. BUT I DID take all the precautions and make all necessary backups prior to doing so!! It is just in my BONES and probably in my DNA that sometimes I just cannot wait to do things like these major OS upgrades...otherwise a little inner voice will keep nagging at me...and I won't be able to concentrate on anything else until I get it done...so I just HAD to go ahead and get it done! I REAAAAALLY wanted Mavericks installed!
And now for the GOOD NEWS! After trying everything else I could think of, I reset the ID CC prefs (which should have been the FIRST thing I did!!) by htting CMD-OPTION-CTRL-SHIFT upon starting ID CC and.....suddenly...lo and behold....WOW....suddenly everything had dramatically speeded up in InDesign! EVERYTHING! Text selection, typing, selecting tools and everything else. I have no doubt that most people who are having slowness issues with ID CC have already tried this and are still experiencing slowness issues....but this worked for me today at any rate. I will keep you posted if I experience any more issues after this.
All I know is I am a happy camper and ID CC seems to now be working faster than it has before.
So...that's my news:)

Anyone download ios 7.0 on their 4s yet? any issues?

anyone download ios 7.0 on their 4s yet? any issues?

I have had major issues since the 7.0.4 update!!!!! No issues with any of the others previously. I have a 4s and not sure if it is related to the model, but since upgrading I cannot keep my phone connected to any wifi, cannot upload photos from phone to CPU and worst of all, CANNOT use it as a phone since any voice recognition no longer works!!! I can hear everyone just fine, but no one can hear me!! I cannot use Siri because it doesn't even recognize a sound at all, cannot use speech to text function, etc. I know it is not a hardware issue since it still links up with my car with the bluetooth function, but if it were a hardware issue then it would only effect the phone and I would still be able to use the phone through my car phone system. I cannot even speak using my car phone link! I am so beyond frustrated with this crap that I am about to give up on Apple products all together and switch to the Samsung Galaxy S4! I have used Apple products exclusively for years and this has just destroyed all of the good fuzzies I had about their products. Not only that, but I attempted to use the support 'chat' function on this site to speak with a specialist and the site has issues too! It won't recognize that I am typing into the name blocks, so therefore, I cannot chat for help! Aghhhhh! I am so over this company! And before it is mentioned, YES I have tried the wipe and restore (which took a ridiculously long time and accomplished nothing!). TERRIBLE PRODUCT!

Any issues with using LDAP on LINUX for GRC 5.2 UME?

Our company is converting our LDAP servers from AIX to LINUX. The DNS name used in our UME connection should not change. Are there any issues with using LDAP on LINUX? We are currently on GRC 5.2 SP9 (in the middle of upgrading to SP12).
Also, I have been trying to connect our test UME system to a test LDAP box that has already been converted to LINUX but keep getting a 'connection failed' error when I try to test it.
Do you have to reboot the server to test changing the LDAP connections? I've been trying it by going into UME, pulling up the LDAP tab, hitting the Modify button, entering the new userid and password for test LDAP, and hitting the Test Connection button. I've verified that this userid and password is correct for test LDAP.
Is there a way to get more information about why the connection failed?
Thanks.

I've been told by our LDAP Support group that none of the other configuration settings should have to be changed. I should only have to change the id and password to connect to a test version of LDAP instead of our regular connection to the production LDAP.
Can you test a connection for a different userid/password without having to reboot/restart the server? Do I need to change these two settings, save then, reboot/restart, and then do the Test Connection button?
Thanks.

Major upgrade, any issues?

Similar Messages

Maybe you are looking for