Majority of Apps released are being reviewed/released the same day?

Check this out:
http://www.medialets.com/app-store-metrics/feeds/new/
If you look at the release dates (when they get submitted), they are generally the same day that they hit the AppStore.
I verified this by looking at one of my apps, and the "release date" was the same day I submitted it. However it showed up in the app store (10 days later) .. therefore I believe that the release date is actually accurate.
What does this mean?
I believe it means that most apps that hit the appstore are getting churned out the same day. If you don't get released on the same day, you might be in for a very long wait, or there is something wrong with you / your app.
Some ideas:
- App that is uninteresting to the reviewers
- It's your second+ app
- Bad reviews / low popularity for existing apps
- Problems with the App
It's an interesting problem. It's unclear to me that there is a solution, except to write high quality, innovative, interesting apps that your pretty sure Apple will like and will get reviewed well / be popular .. which I suppose, isn't such a bad thing, all considered.

My first app took 8 days to go from review to pending contract. It's been pending contract for 3 days now.
I find it unlikely a lot of apps are getting to the store in 1 day.
{quote:title=blazespinnaker wrote:}
I verified this by looking at one of my apps, and the "release date" was the same day I submitted it. However it showed up in the app store (10 days later) .. therefore I believe that the release date is actually accurate.
{quote}
This contradicts your whole point I think. If your app took 10 days from the release/submit date then why do you think so many apps are going to the store the day they are submitted. Maybe I'm misunderstanding your statement.

Similar Messages

  • Prevent multiple personnel actions being performed on the same day

    Hi Experts,
    Does anyone know if it is possible to prevent multiple personnel actions from being performed on the same day even where the action does not change the status of the employee?
    Regards,
    Janet

    Hi Janet,
    i mean to say if you activate the additional action then only the second action on the same day gets stored in to the IT-0302.
    if you dont activate additional actions then if you run the second action on same day it will over write the existing record and gives warning message that  this record over write the existing record.
    so here the point is if additional actions is activated then only system allows you to perform the second action on same day..
    other wise it will replace the existing record.
    if you want to prevent the additional actions to be prevented even after activating it --i think its not possible because the functionality of the IT 0302 is to save more than one record.
    yes you can restrict the to perform the action through authorizations 
    hope it is clear 
    regards,
    mohammed

  • Random Number being changed to the same number for all rows

    hello all,
    first of all I want to mention that this problem start happening after 2.14 instalation of Power Query.
    I'm creating new column in my query and setting all values to random numbers. The problem is that next step (doesn't matter what it do itself) somehow changes all those random numbers to the same random number for all lines.
    here's code sample:
    InsertedCustom = Table.AddColumn(RemovedColumns3, "Random Number", each Number.Random()),
        InsertedCustom2 = Table.AddColumn(InsertedCustom, "Analyst Full Name", each [Analyst First Name]&" "&[Analyst Last Name]),
    when I'm checking step by step, InsertedCustom  creates new column and all values are being set randomly for all lines BUT when going to the next step (InsertedCustom2) all values in the column "Random Number" are being changed to the
    same number (no matter that InsertedCustom2 itself should not be doing anything to column named "Random Number") . I even tried moving InsertedCustom step to the bottom of my code but it didn't help and still facing this issue.
    p.s. updated my PQ to 2.15 - didn't help

    This is a known issue. Power Query assumes that functions are idempotent (given the same arguments, they produce the same result), which isn't true for Number.Random. Our optimization pipeline is turning Number.Random() into a constant in the scenario you
    encountered, which results in all rows having the same value.
    There's been some discussion of how to fix this, but that won't help you in the near term. Can you describe a bit more about your scenario and what you're trying to accomplish? Perhaps we can help you find a workaround.
    Ehren

  • What improvements are being made in the next SA500 firmware release?

    I have noticed that there is a release candidate firmware release available for the SA500 series. What improvements are being made in the next SA500 firmware release?

    The improvements are around VPN and NAT.
    The best way to get more details is to look at the release notes which come with the RC1 trial.
    You can send me a private message and I can forward you the release notes if you preferred.
    Regards,
    Richard

  • How do I delete emails in Mail App that are no longer on the server?

    HI,
    I have configured the Mail App on my brand new iPad to receive emails from my provider GMX.net. It is a POP3 account. The emails stay on the server until I fetch them with Outlook 2003 on my PC. After retrieving emails with Outlook they are deleted from the server. That is what I want. But the emails stay in the Mail App on my iPad. I also can’t delete emails with the iPad on the server.
    How can I do that?

    If you are accessing emails from multiple devices, you are better off using the IMAP protocol. Then the devices sync with the server and they are all looking at the same information. With POP, you are going to get your emails spread about, some on Outlook, some on the iPad. It could get very confusing.
    By default, the iPad will not delete from a POP server. Instructions for changing this are here: http://support.apple.com/kb/HT3228

  • I restored my ipod after backing it up but now all my music and apps that are in itunes on the computer will not sync

    i restored my ipod after backing it up but now all my music and apps that are in itunes on the computer will not sync across

    Did you restore the iPod on this computer?
    What exactly happens when you try to sync?
    Does iTunes see the iPod?
    Was the iPod previous synced to another iTunes library/computer?
    Have you successfully synced from this iTunes library/computer before?
    If so have you done anything like update iTunes on the computer since it last successfully synced?
    Do the songs play in iTunes?          
    Does any media now sync to the iPod?
    Do you have the right boxes checked to sync?
    iTunes: Syncing media content to iOS devices and iPod       
    Try syncing using the manual method                
    Managing content manually on iPhone, iPad, and iPod

  • I created my iTunes account when I was living in Venezuela, but have relocated to the US now.  How do I change my apple store to allow me to download apps that are not available in the store available to Venezuela?

    I created my iTunes account when I was living in Venezuela, but have relocated to the US now.  How do I change my apple store to allow me to download apps that are not available in the store available to Venezuela?
    Sorry for the long 'subject'!  hahaha  I am new to the community.  This should be fun!

    No, What I mean  is, Now I am leaving in USA but every time that I tried to download an app only appear app available in Venezuela no the one available in USA. 
    I already change my address and select USA but still I can not download app for USA

  • How to list all the datatypes are being used in the database?

    Is there any way you can list all the oracle datatypes are being used in the database?
    Thanks,
    Chau

    Use USER_TAB_COLUMNS or DBA_TAB_COLUMNS to determing various data type but USER_TAB_COLUMNS will show you what type being used by a schema user

  • Iphone 4s - how do I change the name in the contacts for the owner of the phone - it is coming up as the other person who uses the laptop - so when ringing or texting anyone 2 names are being used as the caller id on the screen

    Iphone 4s - how do I change the name in the contacts for the owner of the phone - it is coming up as the other person who uses the laptop - so when ringing or texting anyone 2 names are being used as the caller id on the screen

    *Ralph Johns* writes:
    "Your options are:
    Get a trial account form @mac which will work as an iChat name after the 60 days run out but not be a email account that is valid (And is free)"
    Do you mean a trial account from .Mac? (DotMac)
    "Get an AIM Screen name and set it to Display what you want as you set it up.
    The Screen name can be whatever yu want but you can also set it to display something else as well."
    I had thought about this, but it seems other people have already chosen the screen name "pinksharkmark" and virtually every variation of it I can think of. So that isn't an option for me. As for getting it to display something else as well, do you mean that if I were to get an AIM screen name like "CromulentCat" I could somehow log in to iChat under the AIM account "CromulentCat" yet get iChat to represent me to my Buddies as "PinkSharkMark"? Because I have to admit I don't see how that can be done. It appears as if iChat displays to anyone chatting with you precisely the account name you logged in under and nothing else. So if you logged in using a .Mac account, then you are displayed as "[email protected]" while if you logged in under an AIM account, you are displayed as "CromulentCat". But that's it that's all... there is no way to change CromulentCat to PinkSharkMark.
    Thanks very much for taking the time to reply, though.

  • I cannot shu down my iMac (for days) as I get the following message:Photos are being imported to the photo library.  Now as far as I know there are no photos being imported and even if there were 5 days is crazy.  How can I resolve this please?

    I cannot shut down my iMac (for days now) as I get the following message: "Photos are being imported to the photo library."
    Now as far as I know there are no photos being imported and even if there were 5 days is crazy.  How can I resolve this please?
    JLB284

    Open Activity monitor in Utilities, go to the CPU tab>All Processes, and note any process that would appear to be related to importing photos, such as iPhoto, and use Force Quit. This may only be a temporary fix, as it may start all over again when you reboot. If that happens, we need to do some more investigating.
    Also, close all open Applications, then open Terminal in Utilities and copy/paste and hit return, then post the output of this command.
    lsof -l +L -R -V | grep /

  • Photos are being imported to the photo library... nothing being importe

    I am trying to to upload my photos from iPhone4 (6.1.3) to iMac with Yosemite and iPhoto 9.6, but it's always the message "photos are being imported to the photo library" pop out without any photo being uploaded. (That forced me to force-quit iPhoto even when the phone is detached from iMac.)

    Try the Image Capture application that comes with every Mac. It gives you a little more control over the import process.

  • Is there a way to find out which CSS rules are being used by the different html files?

    Is there a way in Dreamweaver CS3 to find out which CSS rules are being used by the different html files, sitewide?
    Thanks - Dave

    Firefox add-on "Web Developer Toolbar" is a must have.  Information > Display Div & Class details.
    https://addons.mozilla.org/en-US/firefox/addon/60
    Another  handy Firefox Add-on  to add to your tool chest is called "Dust-Me Selectors."
    http://www.sitepoint.com/dustmeselectors/
    "It extracts all the selectors from all the stylesheets on the page you're viewing, then analyzes that page to see which of those selectors are not used. The data is then stored so that when testing subsequent pages, selectors can be crossed off the list as they're encountered.
    You can test pages individually, or spider an entire site, and you'll end up with a profile of which selectors are not used anywhere."
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    www.alt-web.com/
    www.twitter.com/altweb
    www.alt-web.blogspot.com

  • Workflow task details are being retrieved from the server

    Hi,
    Using an approval workflow. when the task has been assigned to the person he is getting an email but when clicking on the edit this task button ,the pop window with the
    "workflow task details are being retrieved from the server" 
    error is getting. SharePoint site 2007 and Microsoft Outlook is 2010.

    I have a similar issue with my version of SharePoint. 
    SharePoint 2010 Enterprise.
    Outlook 2013 with MS Exchange
    Document approval workflow.
    When you open the document approval email that comes from SharePoint and click on "Open this task"  the popup window flashes across "workflow tasks details are being retrieved from the server ".
    I've tried the regedit fix and the hive fix and resetting IE that some of the other people have said that works and it doesn't. 
    When I go the site, and connect the task list to Outlook, I can complete the task that way.
    I also created a new approval workflow in SharePoint designer and it behaves the same way.
    Anything else I should try?
    == Steve Morley MedIT, Dalhousie University

  • I can't exit iPhoto or shut down my laptop - message saying  photos are being imported to the photo library - seems to be stuck  can anyone suggest what I should do?

    I can't exit iPhoto.  Message come sup "Photos are being imported to the photo library. Please wait forimport to complete".  This has been some days now and Same message comes up if I try to shut laptop down.  Can anyone offer any suggestions please?

    Use the Force Quit command under the Apple Menu.

  • There is a constant pop up message of "Photos are being imported to the photo library."

    I cannot close my iPhoto or import any new photos. There is a constant pop up message of "Photos are being imported to the photo library." However, I am NOT importing anything to the library. This is very frustrating.
    I cannot force quit. I even tried shutting down the computer manually. When my BRAND NEW IMAC starts back up, the same problem persists.
    I also tried re-importing photos from my camera and flip camera. My iPhoto will not allow an import because these non existent photos are being imported. HELP PLEASE!

    Force Quit iPhoto. It's under the Apple Menu.
    Regards
    TD

Maybe you are looking for

  • IMac which one with FCP 5.1.4 ?

    Hello, I have been using a Powerboog G4 with my FCP no problem so anything would be better!! Now that I have FCP Studio with Motion and would like to to upgrade. Can't afford a tower... So I'm getting an iMac but I'm stock with which modeel and graph

  • How do I get a refund from the app store?

    I bought GarageBand from the app store and have tried loading it on my two mac computers one at home one at work. The home one will not download it at all - it keeps getting so far and then (helpfully) saying 'an error has occurred'. At work, it down

  • Photoshop CS5 still chooses wrong monitor profile in dual monitor case?

    The folk lore has it that if you go to EDIT/COLOR SETTINGS and open the Working Spaces RGB drop down, then what it says near the top on the "Monitor RGB" line is the monitor profile that photoshop is actually using. If that is true, then I would expe

  • Project Stock - Material document Cancellation

    Hi Iam facing Below problem, Pl help me to resolve, I done GR for Project stock Material to Q.I, then done usage deceision from Quality and moved to unrestricted stock. Now i want to cancel the GR material document, When iam trying in MBST for the ma

  • Tab Purchase Order Information

    Hi, Please How make required the fields: Ledger and Default Expense Account. Thank a lot Eduardo Silva Edited by: user12033133 on 02/05/2013 16:11