Make 1142n LWAP as Repeater
Hi
I have AIR-LAP1142N-E-K9 access point working with WLC 4404 and I want to make this AP as repeater. Can someone guide me how to do that?
Thanx in Advance
regards
Rishabh Nagpal
Hi Nicolas
Thanx for the prompt reply and help...i will go through the mesh configuration...one more quick query as i am completely new to wireless mesh, can we do a mesh config along with my WLC and LWAP scenario, i mean to say that can i extend my wireless coverage with a mesh topology having 1-2 ap's without disturbing my existing LWAP configurations and do we need to downgrade the LWAP to autonomous for the mesh config...
Regards
Rishabh
Similar Messages
-
How to make tasks in iCal repeat?
This might be a stupid question, but I'm trying to make tasks in iCal repeat on a regular basis. For instance, instead of having to set a task to repeat every Monday at 10am, I just want to set a task for Monday at 10am and then have it repeat every Monday at 10am. Am I missing this setting somewhere?
volleyhart,
iCal Help says:
You can set how often an event occurs on
your calendar, and when it stops occurring
1. Select the event and click the Info button in the
bottom-right corner of the iCal window.
In Day or Week view, you can also double-click the
bar along the top of the event (where the event's
start time appears).
2. Choose how often you want the event to occur from
the "repeat" pop-up menu.
To make more specific recurrence choices (for
example, to have the event appear only every third
week of the month), choose Custom from the "repeat"
pop-up menu and make your choices in the window that
appears.
3. Choose whether you want the event to stop
appearing after a number of times or after a specific
date from the "end" pop-up menu.
You can also quickly change when the event stops
occurring by pressing the Control key and clicking
the event, and then choosing "Stop Recurrence" from
the shortcut menu.
;~)
Hi, thanks for your response. I don't have a repeat occurrence pop-up menu when inserting new tasks, which makes it all the more confusing - I have that menu when inserting new calendar events, but not tasks. Thoughts? -
How can I make the space bar repeat rapidly?
How can I make the space bar repeat rapidly?
When Safari is in FullScreen mode, menu bar will be hidden.
Safari window to fit the screen?
Move the mouse pointer to the bottom right corner of the Safari window.
Double arrows will appear. Drag it to resize the window to fit the screen. -
Make a new window repeat the image?
I have an image that I want to tile seamlessly. So I do the offset-thing and clone it. What I want to do now is to open a new window with the same image (Window > Arrange > New Window) for filename.ext and then tile the windows (Arrange > Tile), but then also make the new window to repeat the image so that I can see the edits I make reflect in the repeated image so I can get rid of unwanted patterns. I hope I'm not too vague about my question! Thanks!
antevante wrote:
Thank you for your answers! I didn't quite get it to work the way I wanted though.
Can I somehow get my left window to show my image in a non-tiled state so that I can edit it while my right window shows the same image but tiled and zoomed out and updates when I make the edits in my left window? It's a bit of a pain in the *** to edit my image, then copy it and pasting it in an array. Then going back and editing, array again. This is a hassle even with an action. There's maybe other texturing applications for this kind of workflow but I thought I was so close with the New Window-feature in PS
For the updating part you can use smart objects. There is one time setup that is more involved but then you can use this as a template for any future work.
I just did that myself and described the steps:
Create a canvas with a size that will fit perfectly many squares for example 1000 x 1000 to fit 100 squares with the size 100 x 100.
On a new layer at the top left corner create a 100 x 100 square with any color or image.
Right click on the layer with the square in the layer's palette and choose Convert to Smart Object.
Hold Alt and drag the layer on top of itself 9 times to have total of 10 copies of the layer.
On the canvas, make sure there is no selection, and with the Move tool drag one of the overlapping squares snapping it to the top right of the canvas (this is easy if Snap to Document Bounds is checked in the View > Snap to menu).
In the layers palette Shift click the first and last layers to select all layers with the square.
Make sure the Move tool is selected and in its options at the top of the screen click the "Distribute Horizontal Centers" button (the third from the right side).
While all layers are still selected in the layers's palette, press Ctrl + G to group them.
Duplicate and distribute the group vertically in the same way you duplicated the squares but using "Distribute Vertical Centers" button instead. However, Alt+ drag a group doesn't work on a document with nothing but a single group, and I had to duplicate the first group by right clicking on it and choosing Duplicate. Then you can Alt + drag and drop between Groups.
If you whish, while all groups are selected press Ctrl + Shift + Group, to ungroup and then Ctrl + Group to have all squares organized in one group and that's basically it with the initial setup.
Now edit a tile and update the image.
In the layer's palette, double click the icon of any of the smart layers with a square and this will open the square in its own window.
Change, create or paste new image on the image of that window and when you Save this will update all tiles in the other window.
Also in case you don't know, when you are editing the square of the smart layer, you can use Filters > Others > Offset with Horizontal and Vertical set to 50 pixels and for the Undefined Areas, check Wrap Around. to help you with creating a seamless tile. It creates seamless borders and all you have to do is eliminate the seams in the middle with the cloning or painting tools. -
How to make an order on repeating frame using Formula Column?
Hi All,
I have a repeating frame dependent on some query, how to make an order on this repeating frame using a formula column defined in its group and dependet on values from the query?
Note: I'm using Reports 6iPlace your formula column at the top of the itm group and set the BREAK_ORDER to assc.. or desc...
Hope this helps
Hamid
if problem solved, close the thread. -
Trying to make a loop and repeat a question.
Hello all,
I am trying to get a question to repeat itself only if the user enters an invalid amount. I have got the program to generate the invalid question "This is an invalid rate of pay, please enter a valid rate of pay.", but after the program produces this question, the program will still continue (ask the next question) as if the input was valid. I have tried several different if and while statements to try to manipulate the program to call the previous question, but it will not????? Thank you all in advance.I am at a loss. Can someone help please???? Here is the section of code:
// Employee's hourly rate.
System.out.print( "Enter hourly rate of employee:" );
Double employeeHourlyRate = input.nextDouble();
System.out.println();
// Monitors pay rate for validity.
if ( employeeHourlyRate <= 0 ){
System.out.println ( "This is an invalid rate of pay, please enter a valid rate of pay." );
//Loops back to hourly rate question.
I THINK THIS IS WHERE I NEED A LOOP COMMAND.?.?
} // Ends loop program.Hello and thanks for the advice! I have reconstructed as you suggested. However I am receiving 3 errors. I would also like the program to just repeat the question "Enter hourly rate of employee:". Here are the errors. How do I make this work? Thanks for the help. If it makes a difference I am running windows XP and using text pad.
1. Payroll1.java:34: cannot find symbol
symbol : variable employeeHourlyRate
location: class Payroll1
while( employeeHourlyRate <= 0) {
2. Payroll1.java:75: cannot find symbol
symbol : variable employeeHourlyRate
location: class Payroll1
else { grossPay = employeeHourlyRate * employeeHoursWorked;
3. Payroll1.java:82: cannot find symbol
symbol : variable employeeHourlyRate
location: class Payroll1
System.out.printf( "\nHourly rate: $%.2f", employeeHourlyRate ); -
Can I make a birthday reminder repeat every year? (Using the Birthday Reminder List)
I see that when I enter contact birthdays they show up on my calendar...great. But what about the children of my contacts? I thought I would enter their birthdates using the Birthday Reminder List, but when I enter their birthday, it insists on entering the due date....will this reminder keep repeating each year? If not, there's no sense in entering the birthdate. I know I can set up an annually repeating event for the birthday but it just seems like I should be able to use the Birthday Reminder List for this. Thanks
Here's what I've done which may work for others. I've scrapped the idea of using the birthday reminders function. Instead, I created a new calendar (click the settings icon in the upper right of the icloud website) called "Birthdays-Non Contact". Then I entered the missing bdays as all day events (repeating every year) on this calendar. So now all my birthdays show on my main calendar....some come from the birthday field in the contacts database and the rest come from my newly created "Birthdays-Non Contact" calendar events.
Interestingly, if I choose to show only my "Birthdays-Non Contact" calendar, all my contact birthdays appear on it as well, so it gives a complete list of all my birthdays and nothing else....cool.
I should say, everything I'm talking about is what I see on the ICloud site. My husband has the phone at the moment which I presume will show the same picture. -
Problem with track layering: How do I make only one track repeat?
When I am working on a specific track, if I want it to be a repetition, you can drag the green line above to cover the notes you want to repeat, however, when I do this it repeats all tracks.
So how can I have a drum pattern that repeats over and over and then have a different instrument that I don't want to repeat?You are doin'it wrong!
The green bar is for cycling play and record not to loop.
When you select a track in the left pane there is a Loop option: activate it.
cheers
rob -
Unable to make an advance action repeat on the same slide
Good Afternoon All,
A little background info. I am using Adobe Captivate 5.5. I have recored a training practice video and I am attempting to add a button on multiple slides that would show a reference image to help the users through the training scenario when clicked. When they are done with viewing the image I want them to be able to click a button that hides the reference image and allows them to return to the training scenario.
I have inserted the image (called timesheet) on the slide. I have made the image invisble
I have created Button_9 (display name show timesheet) which is visable and Button 10 (display name Hide timesheet) which is not visable. Both buttons are set to allow infinate tries.
I have created two advanced actions
1. Show timesheet has the following actions
- Show the reference image timesheet
- Hide Button 9
- Show Button 10
2. Hide timesheet has the following actions
- Hide the reference image timesheet
- Hide Button 10
- Show Button 9
On Button 9 "Show Timesheet" I have set the action to be excute the advanced action 1 - show timesheet
On Button 10 "Hide Timesheet" I have set the action to be excute the advanced action 2 - hide timesheet
So far everything works as expected meaning I am able to click the show timesheet button the image appears and the button changes to hide timesheet. When I click hide timesheet the image disapears and the button changes show timesheet. However the issue is if I want to look at the reference image again on that slide the Show timesheet button is visable but does nothing when clicked.
Any thoughts would be greatly apperciated.
Thank you for your time
JessicaI think you've gone the hard way around this issue. All you really need is to provide the user with information. Clicking something is not really required by that. A mouseover would work just as well. So instead of trying to use clicks and Advanced Actions to achieve this, I would recommend you avoid all the complexity and just use a rollover image instead.
I use this technique a lot in software tutorials where the user has to perform a number of steps to complete a task and they will need to refer back to the list of steps at regular intervals. I place a rollover caption on the master slide that I can apply to any slide in the project and set the master slide objects to be on top of everything else. The rollover caption contains all of the instructions for the task. This makes it possible for the user to mouse over a given portion of the screen at any time during the task to see what they need to do next. -
How do I stop iWeb outputting multiple image files? It makes my site slow!
I'm a professional web designer (but don't let that put you off) who uses Dreamweaver and also handcodes HTML & CSS websites at work on a PC, but having got a new Mac for home use I thought I'd give iWeb a go for a personal site hosted on .Mac, showcasing my music and film efforts, that I didn't want to have to think about coding.
I've built a short little site using the attractive 'Travel' theme, just 5 or 6 pages so far, and have not yet added any multimedia content. However, it seemed to take ages to upload it when I published it to .Mac. So then I went to view it, and it was soooo sloooow to download each page, even on my 4mb cable connection. I know it's a fairly graphically-rich theme, but still!
I noticed that it was redrawing the navigation menu each time... and upon close inspection of the HTML code using Safari's 'View Source' to my horror I found out that that each page has a seperate '_files' folder that contains multiple versions of files that are also used in other pages - including navigation buttons and background images. I also saw that every element has styling applied to it 'inline' in the code, rather than in a single seperate style-sheet.
To confirm this I published it to a folder on my hard drive and checked it all out. What a mess!
As a WYSIWYG web page editor iWeb is great but it's an undisputable fact that the HTML markup and CSS code it produces is absolutely appaling. What's worse though is that it also renders whole swaithes of text as images and that it does create seperate folders for each pages content including images, CSS code and navigation buttons - so even though the same images and code are used throughout the site for the background and buttons and layout, they are written out as seperate files and have to be reloaded with every page!!!
This means that the .Mac server must be getting hammered and webpages are very slow to download and slow to render in Safari - it's almost like dialup when I'm viewing my iWebsite, and like I said, I've got a 4mb cable connection!
Looking at the code iWeb produces, it is good to see that tables are not used for layout, and that's one thing in its favour. But surely the whole point of providing 'themed' templates for users is that the same content is used across the site and therefore doesn't need to be created multiple times - one of the benefits of using CSS stylesheets. Why doesn't iWeb create a single stylesheet and make efficient use of repeated images instead of creating multiple instances of the same file for each page?
Perhaps there is a setting somewhere I've missed. If so, let me know someone!
It is a great WYSIWYG editor, but behind the scenes it's not efficient, it's not clean and simple and it's certainly not attractive - and I'm surprised at that coming from Apple! I know iWeb is a great tool for beginners and I'm a picky professional, but if I was Joe Public First Time Web Designer I'd be very annoyed by this.
Clean it up and sort it out Mr Jobs!
PS: Also, where does iWeb store the website whilst it's in production? I can't find it anywhere?Your iWeb Site is stored not on your iDisk, but on a file named Domain.sites in your ~/Home/Library/Application Support/iWeb/ Folder.
If , for whatever reason, you wipe your HD and/or lose this file (Get a new computer, Re-Install your OS, Stolen Laptop, Crashed HD, Etc.) without backing-up your Domain.sites file then you will have to re-build your iWeb sites from scratch again.
Of course you can edit your Published HTML files in a different program such as Dreamweaver or even Text Edit. You just can't edit Published HTML files in iWeb. Not at this time at least.
Use iWebBackup to backup your Domain file to a Blank CD or DVD. Backing up your Domain file to another folder on your computer is not fully backing it up. If your computer gets stolen you still lost the file but if you have your Domain file burned onto a CD you have a backup!
Download iWebBackup Here
You can use iWebExtender to automatically consolidate your files into one folder and delete multiple images.
http://iWebFAQ.com -
Liquify Bug, PS CS6, Half-Baked Results (Repeatable)
Liquify mixes results from two different steps, and outputs them in a single file. Here are two examples.
Steps to repeat:
Open file in liquify. Perform liquification. (Extreme changes will slow the computer down and make it easier to repeat these results.)
Click "ok"
Wait while the computer processes the results. (Watch the progress bar.)
Before the progress bar reaches the end, click "cancel."
You are now returned to the liquify plugin. Click "restore all" to reset the image.
Make your new liquify changes.
Click OK, and let the computer finish processing the liquification this time.
As you can see, the blocks that completed processing from the first liquify pass have been saved, and are merged into the image from the second pass at liquification.
Happy to help if there are any further questions or requests.
System Info:
Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:4 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3102 MHz
Built-in memory: 12278 MB
Free memory: 6424 MB
Memory available to Photoshop: 10991 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: ATI Radeon HD 5800 Series
Display: 2
Display Bounds:= top: 0, left: 0, bottom: 1600, right: 2560
Display: 1
Display Bounds:= top: 0, left: -1200, bottom: 1600, right: 0
Video Card Number: 1
Video Card: ATI Radeon HD 5800 Series
OpenCL Version:
Driver Version: 8.930.0.0
Driver Date: 20111205000000.000000-000
Video Card Driver: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.d ll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Video Mode: 1600 x 1200 x 4294967296 colors
Video Card Caption: ATI Radeon HD 5800 Series
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\Gavin\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 223.5G, 74.5G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/01/18-15:07:40 66.492997 66.492997
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/02/09-16:00:02 4.0.93 66.496052
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1642
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 5,0,10,0
AGM.dll AGM 2012/01/18-15:07:40 66.492997 66.492997
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/01/18-15:07:40 66.492997 66.492997
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/01/18-15:07:40 66.492997 66.492997
BIBUtils.dll BIBUtils 2012/01/18-15:07:40 66.492997 66.492997
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/01/18-15:07:40 66.492997 66.492997
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 7.0
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Collada 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Dicom 13.0
Difference Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Embed Watermark 4.0
Entropy 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Extrude 13.0
FastCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Flash 3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Google Earth 4 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Kurtosis 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Maximum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mean 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Measurement Core 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Median 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mezzotint 13.0
Minimum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
MMXCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Picture Package Filter 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Pinch 13.0
Pixar 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Range 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0
Shear 13.0
Skewness 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Standard Deviation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Sumi-e 13.0
Summation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
U3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Underpainting 13.0
Vanishing Point 13.0
Variance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Variations 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
Wavefront|OBJ 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
WIA Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Wind 13.0
Wireless Bitmap 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONE
#3147637Hah. I was just screwing around when I ran into this. The performance on liquify in CS5 is abysmal (especially when it does that thing where it goes to my slowest drive for scratch disk) so when I got 6 beta installed I jumped in with a huge file and did something ridiculous and over-the-top just because I can. (Whee it's faaaaast!) Then I reset the image and did a more realistic adjustment, and that's how I bumped into the bug. Sure it's not a real workflow, and sure 99% of users will never see it, but this is a public beta after all. The whole point is to report issues, and some of us get a kick out of finding stuff.
-
I just connected my iPod after opening iTunes to make a playlist and repeatedly have gotten the message that 'iTunes has detected an iPod that might be corrupted." I can either disconnect and try again, which I've done multiple times to no avail, or restore. I don't want to lose the dozens of playlists, so do I have any options that anyone knows of?
Thank you.What iPhone do you have? You can check in settings>>general>> about.
If you have a 3G you cannot update beyond iOS 4.2.1. The 3G is over 4 years old an was discontinued over 2 1/2 years ago. You need the latest ios to run the latest versions of some apps. If you have a 3GS you can update.
If your phone is not responding, reset it by pressing and holding down both the home button ad lock/ sleep button simultaneously until the Apple logo appears. -
Console message repeats itself
Hi!
Got a problem with the console living a life on its own,- a message keeps repeating itself. Think I had a similar problem with a Canon scanner.
Looking for devices matching vendor ID=1193 and product ID=8719
Looking for devices matching vendor ID=1193 and product ID=8719
Looking for devices matching vendor ID=1193 and product ID=8719
Well, anyone know how to kill it or make it behave, it repeats itself every other second, so in a few weeks time ....well caching up I guess.
Thanks!You need to uninstall the Canon software.
(22123) -
Repeating regions - won't allow
I have to make 7 rows of these and it would be a lot easier, and better to know the way to do it, to make one row a repeating region.
When I select everything in the row and choose make a repeating region I get a dialog that says its already and editable region. I know repeating regions must have an editable wrapper so I'm a little confused.
I made a second row with a wrapper and negative top margin. I've read making a negative margin isn't the best although a tutorial I read said it was ok. Still there must be a better way.
http://classicsmiles.com/servicesNew.htmli'm done, thank you
2009/10/19 Dan POPA <[email protected]>
>
InContext Editing can edit only the elements having the ice:editable
attribute set.
Your page should contain something like this:
>
<!-- the following DIV is an ICE editable region -->
<div ice:editable="*">
some editable content here
</div>
>
But there are no such elements in the
http://www.nolimithockey.com/index.html page.
>
You say you can see the ICE regions in that page so I can only assume that
you didn't upload the file on the FTP server and you are looking at your
local version of the file, not the one from the server.
>
Another possibility is that you mistakenly treat Dreamweaver Template
Editable Regions as InContext Editable Editable Regions.
I can see that there are DW editable regions in your page: the elements
located between the <!-- InstanceBeginEditable name="Headline" > and <!
InstanceEndEditable --> comments.
>
>
You can create ICE editable regions by selecting in Dreamweaver an element
and applying the Create Editable Region command under the DW menbu Insert ->
InContext Editing menu, see the image:
>
http://forums.adobe.com/servlet/JiveServlet/download/2242-505554-2323206-23866/create_ice_ er.png
>
Please let me know if any of these were of any help to you,
Regards,
Dan Popa
> -
Title animation repeats when I move the segment
Hiya,
I'm very new to FInal Cut Pro X.
I have made a title with the lens flare animation. I set two keyframe markers to make the text enlarge before disappearing. It worked perfectly. Until...
I moved the segment and the animation went haywire. The animation now starts two or three times before the segment has finished playing.
I can't move the segments at all without this happening. My only option seems to be to decide exactly where I want the segment before I work on it. Which can't be correct.
Can anybody help, please?
Thank you.Hi Tom!
Thanks for replying.
Here are two screenshots showing the keyframes I set for one of the titles. I'm using the Lens Flare titles.
When I move the completed title along the timeline it adds extra keyframes in seemingly random positions, which I then have to delete manually. Otherwise they make the individual titles repeatedly flare and change size. Working with six titles is almost impossible because they all behave similarly when I shift them along.
I feel that it might be to do with the fact that the keyframes are stuck to the timeline and not the title segments, but I just don't know
Thanks for your support,
Bart
Maybe you are looking for
-
Custom report to get MD04 but for n materials
Dear All... Do you know if already exist a report that show same information than the MD04? Is needed to put several material numbers and get the MD04 information to can do sorts, filters, download to excel. Is like the MDLD transaction but instead t
-
Crystal Report 2008 results "Password did not match error" in SQL Server Log
Hi, I am trying to develop some crystal reports using Crystal Report 2008 SP4 to connect to SQL server 2008 through RDO (ODBC). My problem is that anytime Crystal Report is trying to establish a connection with SQL Server, first it tries to connect w
-
Ipod not found on my computer or iTunes
Everything was fine till my brother came with his new iPod. Mine was not named . I just plugged in his and i've been asked for a name . I skipped and continue. Now my own iPod is not recognized by iTunes or my computer. I'm scared to ****. What do I
-
Hi, please help me with this issue. I have a form with multple blocks based on database tables. All the fields are displayed on a tabbed canvas with multiple tab pages. I also have a toolbar (one of the blocks in the form) with query, commit, cancel,
-
How to: copys pics from iphoto to external hard drive to share
I scanned about 10,000 historical family photos into iphoto, and now I'd like to gift each of my siblings with a copy of the entire group of photos on a portable memory/storage device. I have chosen to use a portable (external) hard drive (called the