Make 2 vlans to one virtual vlan

in a 871w router i have a vlan wired vlan 1 10.10.10.0 and a wireless bridge bvi1 10.70.10.0
i want the vlan 1 clients to see the bv1 clients as with an ip in the range 10.10.10.0
they are both inside interfaces.

The bridge between wlan and wired is routing ip. This must be changed:
conf t
no bridge 1 route ip
(i.e. now set to bridge ip)
regards,
Leo

Similar Messages

Software Update Server - Deleting old updates to make space for new ones

On Page 77 of the SystemImage_and_SW_Updatev10.4.pdf Apple recommends "deleting old updates to make space for new ones". I've looked and searched and yet to find a way to do this. The Server Admin interface and the command line options I've looked into don't appear to provide this option.
So I actually tried stopping the server, moving the updates from /usr/share/swupd/html to another location, starting the server, the server wouldn't start, moving the files back again, the server still won't start.
1. Does anyone know how you're supposed to "Delete old updates to make space for new ones"
2. Does anyone have any suggestions as to how to get Software Update service running again?
Power Mac G5 Mac OS X (10.4.7)

Does this article contain anything useful?
(16738)

I have 2 new iPhone 4s. Messages from other iPhone users appear on both of my new phones. I want these seperate. How do I make these independent of one another?

I bought my daughters new iPhones (4s) for Christmas. They love them except that when another iPhone user text one daughter, the other daughter gets the messages and same for the other daughter's text. How do I make these independent of one another without putting my family on separate ITunes accounts?

When you were setting the phones up you should have been asked if you wanted to use the phone number or an email address for FaceTime/messaging. My guess is you used the same email for both phones. Just go in and change it. That or you have the same iCloud id on both phones, I'm not using the cloud so I can't help you there.

Do I make multiple videos in one project or make multiple projects??

I am going to make at least three music videos for a local band for their web site. Do I make all three in one project and can i encode them for YouTube separately or do i do all three in totally separate projects??? It seems like once i have all the footage and audio loaded in a project and do one video to upload to YouTube then to do another video i have to load all that raw footage and audio all over again for the next video and then for the third video.... seems like once all that is loaded into a project i could just separate the videos for a few seconds and do another and then another, but how then to send them to YouTube separately???
Or if i do all three in separate projects how can i combine them into one project to export in DVD quality for the band to use for promo???

Personally, I would break the Project into three, discrete Projects, but you do have a point about the Importing of the Assets.
You can certainly do this with one Project, and then Export/Share segments of it with the WAB (Work Area Bar). Here is a look at the WAB from an earlier version of PrE:
As I do not upload to YouTube, I cannot tell you if you can use the WAB, when you do the direct Export/Upload. You may have to do an Export/Share for the individual segments, and then manually Upload each. Others can shed more light on this aspect.
Good luck,
Hunt

Can I creat an new iCloud account and make it the primary one for my backups and buy extra iCloud storage for it? Thank you

Can I creat an new iCloud account and make it the primary one for my backups and buy extra iCloud storage for it? Thank you

Hey Hindfromlondon,
Welcome to Apple Support Communities. Since you are posting here, I take it you already have an Apple ID.
You can setup that Apple ID to work with iCloud. See:
Set up your Apple ID for iCloud and iTunes - Apple Support
And you usually want to stick with one Apple ID as having multiples can cause confusion (especially with purchases).
Frequently asked questions about Apple ID - Apple Support
What is an Apple ID?
An Apple ID is a user name you use for everything you do with Apple. Creating an account for an Apple service, such as the iTunes Store or the App Store, creates an Apple ID. Apple ID allows you to access other Apple services. You don't have to create a new account for each service—just use your Apple ID.
For a complete list of all of the places you can use an Apple ID, see Where do I use an Apple ID.
and further down:
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.
Regarding iCloud storage check out
iCloud storage upgrades and downgrades - Apple Support
I encourage you to read all about it as there's lots of information out there.
Take care,
Nubz

BPC 10.0 NW - How do I make Business Rules run one Period at a time

I was wondering if anyone has a way to make business rules run one period at a time before moving on to the next to the next time period (i.e. January 2014 calc prior to moving on to February 2014). In past SQL this could be achieved with a piece of script *CALC_EACH_PERIOD. Is there anything like this that can be applied in the NW platform for Business Rules? I have some logic that I want to run through a package on multiple periods at once. Part of this logic contains a Business Rule that uses a value from the preceding period. the Business rule appears to be calculating all time periods selected in the package at once so it is missing the piece that is supposed to come from the prior month unless the package is run one period at a time. I need the logic to run sequentially by time period (oldest first) when more than one time period is selected.
thanks,
Keith

Hi Vadim,
Script for the business rule is below, it runs along with the FX_Trans rule in the same package ( I have also attached a screen shot of the actual Business rule its self)
*RUN_PROGRAM CALC_ACCOUNT CATEGORY = %CATEGORY_SET% ENTITY = %ENTITY_SET% CURRENCY = USD //GROUPS = %GROUPS_SET% TID_RA = %TIME_SET% //OTHER = [AUDITTRAIL=%AUDITTRAIL_SET%] CALC = CALC_HIST_USD *ENDRUN_PROGRAM
Thanks, Keith Carlson

Concerning midi data in GarageBand for iOS: can we copy midi data from one virtual instrument to another?

Concerning midi data in GarageBand for iOS: can we copy midi data from one virtual instrument to another?
For instance: I play my "lucky take" on the virtual piano, and now I am curious how it would sound on let's say a organ. Normally I would select the midi content out of the piano track and copy it into the organ track. I cannot figure out how to do this in GarageBand for iOS. Is there anyone out there with a solution?
Thanks!

It is limited, how you can move regions between tracks. Basically, you can move between tracks with the same touch instrument. See the help: http://help.apple.com/garageband/ipad/2.0/index.html#chsec12c15d
Move a region
Drag the region left or right to move it forward or back in time. Align the left edge of the region with the bar or beat on the ruler where you want it to start playing.
Drag the region up or down to move it to another track with the same Touch Instrument. You can also drag regions between Keyboard and Sampler tracks, and between Audio Recorder and Guitar Amp tracks. Smart Drums regions cannot be dragged to another Smart Drums track.
If you move a region so that it overlaps another region, the overlapped part of the “covered” region is deleted.
Paste a region
You can paste a region you have copied, or paste an audio file from an app that supports copying audio to the clipboard. GarageBand supports 44.1 kHz sample rate, 16-bit depth uncompressed audio files.
You can paste copied regions to another track with the same Touch Instrument. You can also paste regions between Keyboard and Sampler tracks, and between Audio Recorder and Guitar Amp tracks. Smart Drums regions cannot be pasted to another Smart Drums track. Audio files copied from another app can be pasted to Audio Recorder or Guitar Amp tracks.
Move the playhead to the point where you want the region to start.
Tap the header of the track where you want to paste the region to select the track.
Tap the track where you want to paste the region, then tap Paste.You can also tap an empty area of Tracks view, then tap Paste. In this case the region is pasted into the currently selected track.

How can I make a change on one computer effect other compujters automatically

If I change a bookmark on one computer, I want that bookmark reflected on all the other computers. It seems as if I have to do the sync on system A to get the change to the server; then I must go on System B, change the sync type to copy from the server and do a sync. This is way too cumbersome. If synch means to have the same data everywhere, why isn't the default to make this happen as one logs into each system? right now if I make a change on one system and do a synch, it will get overwritten when I go to another sysem and synch.

We use test sites on our remote server. We purchase a cheap $2.99 .info domain and give it a unique domain name. We then make it an addon domain on our remote server.
When we're building sites we then make a unique subdomain to the addon domain. We upload our files to each unique site's subdomain so we can see and test them live,.then we can contact the client
and tell them to take a look at their site live, which at the time is a subdomain, etc.and uploaded.
Once we have the site completed and uploaded to the designated subdomain we then contact the client and ask them to test their site and see if it's ready or do we need to make more changes.
We use a hosting package for this that cost us less than $30.00 a year with unlimited domains and subdomains. We've got about 30 subdomains on it now and they're not even making the usage wiggle because of taking very few hits.
Once the site is completed and approved we then delete that particular site's subdomain and upload to the clients remote server.
We don't test our sites locally, we test all our sites live as we build them using a subdomain to the .info tld domain on our remote server. You can also buy hosting packages for around $12.00 a year to test your sites on.

TS2755 Is there a fix to deleting already deleted address book contact, from messages search? i.e. when you type in say letter c in messages search, all contact with a c, past already deleted and current all appear? How do you make the old deleted ones a

Is there a fix to deleting already deleted address book contact, from messages search? i.e. when you type in say letter c in messages search, all contact with a c, past already deleted and current all appear? How do you make the old deleted ones appear?

only way is to restore the phone as new. OR wait until IOS 7 comes out in the fall.

How to make several pushbuttons in one line (on screen)??

How to make several pushbuttons in one line (on screen)??
thanks in advance!!!!

Hi,
USE
SELECTION-SCREEN BEGIN OF BLOCK.
SELECTION-SCREEN BEGIN OF LINE.
define all buttons between this block.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK.
selection-screen
Cheers
VJ

When using printer Epson R1900 with Aperture 3 and if I mistakenly choose the wrong paper such as, epson's luster instead of glossy, does that change the exposure? Like make it too dark one or two stops!

When using printer Epson R1900 with Aperture 3 and if I mistakenly choose the wrong paper such as, epson's luster instead of glossy, does that change the exposure? Like make it too dark one or two stops!

Hi,
If you choose the incorrect settings for printing, yes - the print quality will be affected.
Different papers absorb the ink differently, so you can end up with prints that are too light, too dark, or have a colour cast if you make incorrect choices in your Aperture or printer settings.

How do you make the background all one color without disturbing the subjects?

I shot a wedding this past weekend. Where the bridal party walked in there was an acrhway with christmas lights as the only lights. It made the background all splotchy. I have tried the paintbrush tool, but only preset choices, such a textures and such. Won't help. I need to work around people and make the background all one color. I've tried using a vignette, but it made it too dark, and when you lighten the exposure you see all the splotches. Does anyone have any advice. I am in a jam, I want the colors to be uniform for all the bridal party....and not look like someone threw paint on the wall. HELP PLEASE!
I'm using Adobe Photoshop Elements 10.

You'll need to post an example so we can figure out the best way.
Ken

One script to make multiple cells call one function or vice versa

Please help.
I need one script to make multiple cells reference one function or one cell reference multiple functions.
Goal: On the enter event of cell c1, I want to make cells (this, Header.c1, Example.c1, rLabel) highlighted, and this would be for every other cell that is entered into, their corresponding column header and row header will be highlighted.
I've tried combining cells: eg
colourControls.hdfieldLoseFocus(this, HeaderRow.c1, Example.c1, rLabel);
and I've also tried combining some scripts in the function:
fieldObj.ui.oneOfChild.border.fill.color.value = "255,255,200";
HeaderRow.fieldObj.ui.oneOfChild.border.fill.color.value = "255,255,200";
ExampleRow.fieldObj.ui.oneOfChild.border.fill.color.value = "255,255,200";
But they dont work. See the link to my form.
http://www.winstonanddavid.com/example.com
I tried testing the function with the cell 'c1' but it doesnt work.
Also, I want to get rid of the multiple lines of script in every other cell.
How can I do this?

I played around with the ExtendScript Toolkit and cutted and pasted the previous script from here until I managed to get a script that actually works like I was thinking. I then added a code from the CS4 Reference Manual to move Layer1 to the top (just to see if it worked).
I have no idea yet if the the code includes something that does not belong, but at least I get no errors. The current code is like this now:
//Apply to myDoc the active document
var layerName = LayerOrderType;
var myDoc = app.activeDocument;
//define first character and how many layers do you need
var layerName
var numberOfLayers=0;
//Create the layers
for(var i=0; i<=numberOfLayers; i++)
{ var layerName = "Background"; var myLayer = myDoc.layers.add(); myLayer.name = layerName; }
{ var layerName = "Picture"; var myLayer = myDoc.layers.add(); myLayer.name = layerName; }
{ var layerName = "Text"; var myLayer = myDoc.layers.add(); myLayer.name = layerName; }
{ var layerName = "Guides"; var myLayer = myDoc.layers.add(); myLayer.name = layerName; }
// Moves the bottom layer to become the topmost layer
if (documents.length > 0) {
countOfLayers = activeDocument.layers.length;
if (countOfLayers > 1) {
bottomLayer = activeDocument.layers[countOfLayers-1];
bottomLayer.zOrder(ZOrderMethod.BRINGTOFRONT);
else {
alert("The active document only has only 1 layer")

How to make data flow from one application to other in BPEL.

Hi All,
I am designing work-flow of my application through BPEL(JDeveloper), I am making different BPEL projects for different functions, like sales manager got the order from sales person and sales manager either approve it or reject it, if he approve it it goes to Production manager and he ships the goods, now I want to keep sales person, sales manger,production manager in seperate BPEL files and want to get the output of sales person to sales manager and sales manager to production manager please help me in dong this.
I was trying to make partner link in Sales manager of sales person and getting the input from there. I dont know this is right even or not, if it is right I dont know how to make data flow from one application to other.
Experience people please guide.
Sales Person -----> Sales Manager ----> Production Manager
Thanks
Yatan

Yes you can do this.
If you each integration point to be in different process, you have to create three BPEL process.
1. Create a Async BPEL process 'A' which will be initiated when sales person creates the order.
2. From BPEL process 'A' call a ASync BPEL process 'B' which has the approval flow. Depending on the input from process 'A' the sales manager will review the order in workflow and approve or reject and send the result back to process 'A'.
3. Based on the result from workflow, invoke the Sync BPEL process 'C', where you can implement the shipping logic.
-Ramana.

If i make an reservation for one iphone 4 in Retail Store on London?

If i make an reservation for one iphone 4 in Retail Store on London UK?
How much time takes when the iphone arrived on the apple shop and i come to pickup the iphone?

I have been told from the stores its best to order online. They are not sure of deliveries (ie. they do know but they dont tell their customers, just in case the deliveries dont arrive).
Regents Street - said order online as I may be waiting for a month.
Brent Cross - Had no idea when I can pick up - I put my name down anyway.
Whitecity (Westfield) - Said I had to come into store and reserve.
Situation I reserved on 19th July, have recieved no confirmation email, no moving up email, no pick up e-mail.
To be honest I think the stores in London you may be waiting a long time (ie 3-4 weeks +), else where in UK maybe 2-3 weeks.
I know the USA stores are much better with reservations, with confirmation asap and updates to say you are moving up, and pick up much faster, just a shame its not offline!

How can I make two Canvas in one Window ?

I want in the main window ( that is only window in the module ) press button to appear another canvas.
but that I can't make it , I just made two window until the another window appear.
that's all
I tried with :-
show_view('canvas_name');
but didn't work with me Sad
the another canvas made it stacked Canvas .... but also didn't work Sad
so please , How can I make two Canvas in one Window only ?
and thanks in advance

this code work with me :-
show_view('canvas name');
go_block(block_name');
execute_query;
for HIDE button u have to write...
hide_view('canvas_name');
but
that not exactly what I want ...... I want the stacked canvas appear like second window , and could control on it like window .... it could be possible ????

Make 2 vlans to one virtual vlan

Similar Messages

Maybe you are looking for