??? Make a CD recording from audio track
I need to make a CD recording of an audio track that I have in FCP. Can anyone help?
Thanks,
Glenn
You need to take the aiff file that FCP exports and drag & drop it on the iTunes library, when it shows up in the list, create a playlist with just the Aiff title in it and burn the CD in iTunes. If iTunes tryies to convert it AAC, then set the import settings in iTunes to Aiff before bringing in the the Aiff file.
Toast would be a better solution if you have it, as well as being simpler to create the audio CD.
You can delete the aiff from iTunes when your done as well as the play list it was a part of.
Similar Messages
-
When I record an audio track using Logic Pro X, there is a visible waveform which appears as I record. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is still there. How can I stop the waveform from disappearing? And can I do something to view it after it has disappeared? Anyone know the anser?
In Logic:
Preferences/Audio Set Recording Delay to 0 <zero>
This should always be set to zero unless a specific set of circumstances exist and you're audio drivers do not report position correctly.
On occasion, usually when importing a Logic 9 project, Logic-X randomly changes this to a negative/positive number. It's actually a bug in Logic, as it should always display the waveform. -
Record enable buttons have disappeared from audio tracks
The record enable buttons have disappeared from audio tracks. How do I get them back?
Try control- or rightclicking a Track Header and...
-
Can't enable recording for Audio tracks with H2 Zoom
I'm running Logic Express 7 on a Macbook Pro Intel.
I used to record vocals with the H2 Zoom as an external mic. But since I ran an update on Logic, I can no longer enable recording for Audio tracks for recording as soon as I connect the H2.
Interestingly, it let's me only choose an H2 output driver.
Connecting the same device to Garageband I can choose both, H2 output driver and H2 input driver.
Anyone else facing this problem? Advice is greatly appreciated.You have to set it up using the aggregate device editor (utilities folder). In the utilities folder open AUDIO MIDI setup. From the menu select Audio>Open Aggregate device editor. Add a new aggregate device and name it zoom. Selelct H2 auidio in and H2 Audio out. Check the clock next to H2 Audio out only. Make the Zoom aggregate device you just created your default input in the systems setting area of the audio midi setup form. Close Audio Midi Setup and return to Logic. You may need to restart logic. You should now see "Zoom" in Preferences>Audio> Core audio> Device and you should be able to record using the H2.
Hope this helps -
Metronome click recorded onto audio track , can not separate during playbac
I set the metronome for "click during recording only" and for some reason the metronome clicks on this audio track during playback as well. I am recording an audio track from a Kurzweil 2500sx keyboard.
Please comment ?
DavidWell just hit "c" to turn it off or look for the Metronome symbol in your transport window and turn it off there.
Maybe the Click was recorded onto the Kurzweill track when you recorded it into Logic? -
Using Pro Logic X to record. I have several tracks and I'm trying to record an audio track. I have the mic connect to Avalon 737 then into apollo interface. When I record all track are being recorded into that track. I can't just get the audio to record.
Thanks for responding. Everything seems to work right except for the when I plug into the 737. Ok let me see if I can be more clear. I had this set up done with two representatives of Neumann, and DBox. Here it is I hope this helps. 32 Channel snake (24 Inputs 8 outputs) Channels 1-8 from snake to my Octopre for Drums. From Octropre output quarter inch lines into the Apollo 2, quarter inch input. This is so that the Apollo 2 is taking the drum tracks. Snake Channel 9-12 into Apollo 1 channels 1-4 xlr. Snake Channel 13-16 into Apollo 2 Channels 1-4 xlr. Snake Channel 17 into the 737, output of 737 into Channel 5 of the Apollo 1 quarter inch.
Ok The Dbox. Sum output L&R into channel input 7&8 of Apollo 1. Apollo 1 output channels 1-8 into summing input channel 1-8 of Dbox. Apollo 1 main L&R going to main analog input L&R of Dbox. Spid out to DAW input of Dbox. I have both ADAT of both Apollos connected by optical wire. Also have port 2 of Apollo 1 into port 1 of Apollo 2 connected by Firewire. Let me know. Hope I got it right. Thanks for responding. -
I Recorded 4 audio tracks, could hear it in the headphones while recording. Meters show input. No playback sound. Please Advise.
How can anyone advise on such a cryptic post, all we can do is guess.
Which version of Logic, what audio hardware are you using?
Have you read the manual? -
Problem recording 5 audio tracks in one go
HI
I have audio tracks 1 - 5 on logic assigned to tracks 1 - 5 on my mackie mixer. Though when i go to click all the record buttons so i can record 5 audio tracks (live drums) in one go it wont let me. For example The record button only lights up red on one track, ie audio track one. When i click the audio track 2 record button that lights up the track one red light goes out.
Has any one got any advice, i cant record all my tracks in one go,
ThanksYour inputs need to be 1 - 5... on your channel strip,right under the i/o there is a little gray box that displays,the input, if all the channels have the same inputs,then only one track will rec enable at a time.select your inputs according track 1 should be input 1 track two should be input 2 ect. Page 275 in the manual
-
Can someone tell me step by step how to record from audio tape to mac book with the help of xitel inport deluxe system. Somebody had mentioned that we do not have to download the software - so I did not, but the computer does not recognize the connection. How can I know it is connected - can someone please tell me step by step as teaching a layman. Thanks.
It seems this question is best posed to the makers of "xitel".
I looked up A product and it is out for Windows but does not mention Mac OS X:
http://www.xitel.com/USA/prod_inportpro.htm -
I'm trying to record audio tracks in Logic 9 over midi tracks I've created using a software instrument. I've done this before, and there used to be a no problem in seeing the midi information in the piano roll or the score while recording audio tracks, but it now impossible to reveal. Has ayone else exerienced this? Was there a change (update) that eliminated that as an option? Or did I do something in preferences somewhere (unbeknownst to me when doing it) that has caused this? Thanks for any suggestions.
Just open the piano roll fro the regions you want and deselect the chain icon at the upper left.
-
How do you make a audiomixdown of 4 Audio Tracks in a Sequenz ?
I have the following Problem.
A Sequenz with 4 different Audio tracks. 2 Tracks with ambience sound,1 channel with voice over and 1 channel with the interview sound.
For the final playout i need on channel 1 the final mix of all 4 tracks and on channel 2 the IT Mix (ambience sound and Interviews sound).
Now my question how do i make a audiomixdown of the different channel , with the Avid mediacomposer it is quite easy you select the desired tracks and make a mixdown. Is there also an mixdown option in Finalcut?
Thanks for the help.
JanWelcome to the forums.
Well, you can ASSIGN what audio channel the various tracks of audio get output to. But I don't think you can do what you are asking. Because once you assign track 2, 3, and 4 to go out CH 1, then you cannot again assign them to go out to CH 2. The sound can only go out one channel at a time.
Best thing would be to export AIFF files from the timeline with all the tracks you need...turn off the ones you don't need when you export for CH2.
Shane -
I am using an Aux track to monitor external audio. Any chance it is possible to create some sort of environment setting to allow me to record a track directly from there?
This isn't an everyday thing, but it's stupid that logic doesn't support it easily. Logic's routing setup, arcane as it is, isn't quite that flexible.
You can do it by routing the signal out your interface, and back in (with a cable) to an audio track.
Or, for (possibly) reduced latency, use Jack Tools (or something like it) to do this looping with a virtual interface. -
Recording Multiple Audio Tracks - delay problems in 7.2 Pls HELP
Hi, I'm finding very buggy behavior - if I record across several audio tracks (say 5 mono channels) for longer then 10-15 sec. Logic HANGS for a long time when I'm done with a take - 15-25 secs of the spinning ball icon, and then will redraw and start the dialog box that says it's computing the overview. I'm currently on 7.2.2 but I also tried going back to 7.2.1 and it's still doing this. I have the "faster overview calculation" box un-checked, but it didn't seem to make any difference either way. I also tried this on a new file, same problem -
I also already tried recording to different drives, and selecting and unselecting the 'record limit' dialog in the record destination dialog - I usually have this set to a max recording time of about 7 minutes. None of these changes affected the sluggish behavior.
Anybody else know of this and know of a fix/workaround? I have a session to record tonight with multiple players and this session is going to go like molasses unless I figure this out!
thanxHmm, I've never had anything like this. I'm wondering whether it indicates an underlying disk problem?
Try running repair permissions and a disk diagnostic tool if you have it. Are you using an internal or external drive? Try recording to a different drive if you can and see whether the problem persists.
You could also try creating a different user and running Logic under that account, to see if it still shows the same behaviour (if not, then it could be a user permissions issue or something funky with your user account). -
Trying to separate music track from audio track
Hi all - I've been reading posts, but haven't been able to determine whether there is a way for me to separate a music track from an audio track.
I have a copy of a television show that aired, where the music and audio tracks have (obviously) been mastered to the point where it's one music channel.
I'm trying to extend the music a little further without including the people talking. Does anyone know any creative methods that would allow me to do this?
Thanks so much for your help.No...not at a professional quality level. You would need to either collect enough of the music bed where no dialog or f/x are present or obtain the oringal source music - which could be anything from readily accessible library or commercial to no longer existant custom music.
Sorry...I know that isn't much help.
From a Non-Pro level...there are really only two tricks:
1) If there is enough contrast between music and everything else...about all you could do would be to EQ out the ranges where dialog exist. 300hz - 4Khz maybe. But that is also where the definition is going to be in the music.
2) If the music is in stereo and the dialog is not. You can try to elimate the dialog by inverting the phase of one channel and monoing the two togther. This will leave you with only L-R material. Again, not good enough for professional broadcast...but you can try it. -
Recording 2 Audio Tracks with Auto -Create
Hi all
I'm recording some audio and working with the auto create and auto mute in cycle record under Song Settings. I want to record a di bass and it's treated partner(through a Line 6 pod) and 01v mixer. Can the auto create and mute be set up to deal with multiple passes of both audio tracks coming in? Doesn't seeem happy about it!! Thanks
G4,1 ghz dual.1gb ram Mac OS X (10.4.7) logic 7.1.1,korg N1,unitor 8,01vUse a stereo track with the DI on one side and Pod on the other. You can split them up later if you wish.
Maybe you are looking for
-
Erreur install HP officejet 4500 G510 on PC HP with windows 8.1 64 bit
When i would like install my print HP 450 G510 I obtain an error message during installation. Can you help me
-
Using "File" as the technology in ODI Designer to populate dimensions
Hello John (John Goodwin) I am currently following your blog on "ODI series 4 - Enter the Designer" and so far I have been successful with the following: 1) Connecting to the planning application 2) Performing Reverse operation However, when I create
-
Photo transfer PC to iPad via SD card not always successful.
Frequently jpeg files I have copied from my PC onto an SD card are not recognized by iPad Photos using the Apple accessory. I am downloading onto the card each file individually and not as a folder. Any ideas please?
-
After Effects CC Script UI issues
Hi there, some information I gleaned from discussions on the Indesign forum. Might be good to have one thread where various issues are discussed in one place. Keep in mind these issues being discussed over there are showing up in InDesign not After E
-
I forgot my secret answer to my question, and I want to change my password
I forgot my secret answer to my question, and I want to change my password