Make a field , mandatory to optional
I wanted to make the last name field which is a mandatory field to an optional one. Could somebody help me on this.
Thanks in advance
Hi,
Modify FormMetaData.xml and make the field optional.I am not sure if modifying only formMetadata.xml will give you error.If yes then modify the tjspGenerateCreateUserForm.jsp.There are already many post for modifying the jsps.
Below post might be helpful.let me know if you have any questions.
OIM Form Customization
Regards
Nitesh
Similar Messages
-
How to make a field Mandatory in a Table view?
How to make a field Mandatory in a Table view?
The requirement is, the user should not be able to append a new Row, unless and untill he enteres the data in the column SOLD-TO. Now how do i acheive making this field madatory. Normally in Edit form view, we can go in customizing and flag Mandatory, for table view we don't have this option.
Please can anyone of you guide me in this approach?
Jagadish.GHi Jagadish,
have a look in this thread, part of the code you can use in eh_insert method or logic to write enable/disable insert button.
Re: Assignment Block Mandatory
regards
Ismail
Edited by: Ismail Shaik on Oct 21, 2009 11:36 AM -
I want to make Requistioner field Mandatory in the Purchase requistion.
Whenever i create purchase requistion i want to make Requistioner field mandatory. I have checked the filed selection NBB and changed to mandatory and ME51 also made mandatory after that also whenever i create with ME51 PR is going to next screen without asking for requistioner.
Please let me know where actullay i have to make mandatory so that whenever i create it should ask the requistioner.
Thanks.H,
You also select the field Requisitioner as mandatory for below field selection>
AKTH,ME51 & ME51N
Because always the field selection: mandatoey , display & optional will work in
Setting Priority
Hide 1
Display 2
Required entry 3
Optional entry 4
SAM
Edited by: Saminathan Gopalan on Jun 22, 2010 3:25 PM -
How to make extended field mandatory in Master Agreement
Hello All,
I am new to SAP CLM, and I have requirement where one extended field in master agreement needs to be made as mandatory field.
I tried in extension definition but check box to make it required is disabled and I am unable to find other way to do it.
Can some one help me and Please let me know how make extended fields mandatory in CLM.
Regards,
PrabhatHi
This could be achieved using Page Customization.Go to Setup-> User Interface-> Page Customization, open master agreement object (create new with UI ID:contracts.contract.ui.buyside.default if doesn't exist ) and add a new customization for extended field with Property set to Required.
Regards
Mudit Saini -
Radio Button to make other field Mandatory
I have two Radio Buttons that I want when clicked on (either one) to make a Number Field mandatory. I have viewed many websites on setting a mandatory field but the script I am using will not work. I have tried a couple ways of writing it but I seem to be missing something.
I have used this script in the Show of: click & change
Here is the script that I'm using right now.
if (this.rawValue==1)
AssemblyNu-1.mandatory ="error";
else
AssemblyNu-1.mandatory ="disabled";
And this one:
if (this.rawValue==2)
AssemblyNu-1.mandatory ="error";
else
AssemblyNu-1.mandatory ="disabled";
Thanks,
HHud5757So, I put a quick form together to test your code.
On the change event of the radio button list (not the radio button itself), I added:
if (this.rawValue == 1) tfTest.mandatory = "error";
else tfTest.mandatory = "disabled";
In my case, the radio button with the value of 1 is the one I want to make the field mandatory. If you want either button to make it mandatory, then use:
if (this.rawValue == 1 || this.rawValue == 2) tfTest.mandatory = "error"; -
How to make a field mandatory in billing
How to make a field mandatory in billing document,if m right with the help of incomplition log but how.....
plz reply the full configuration.Hi Mohan,
We normally create a billing document with reference any other document say Order or delivery.
so, all the necessary information in the invoice will be taken from preceeding doucments. Thats way in the order level we check for incompletion log. If any important data is missing in the order level then the succeding documents will not be created.
Thats way in the billing documents all the necessary information will come automatically either from preceeding documents or from master data.
Still you want to make any field mandatory, you can do these by modifieing Billing documents user exists,you can make which ever the fields are mandatory and to be checked before saving. so when you are going to save the invoice, it will check if these fields are maintained or not.
Hope this is clear.
Reward if helpful.
Thanks,
Praveen -
How to make all fields mandatory in sales order T- code VA01 initial screen
Dear all,
how to make all fields mandatory in sales order T- code VA01 initial screen itself
The fields are
Sales Organization
Distribution Channel
Division
Sales Office
Sales Group
Regards,
Amar ReddyHi,
You can use Transaction Variant to achieve this functionality.Please go through the following link which helps you in creating the same.
[Link|http://wiki.sdn.sap.com/wiki/display/Snippets/TransactionVariant-AStepbyStepGuidefor+Creation]
Regards,
Phani Prasad -
How to make some fields mandatory for a custom screen we have added
Hi All,
Please let me know how can I make some fields mandatory through coding in PBO for only some fields of a screen.
Say if I have 4 fields in my screen(module pool not selection screen) i want to make mandatory 2 fields based on some conditions how to do this? I tried using screen-group but this will make mandatory all the fields of that screen mandatory.
I want only specific fields based on condition in run time.
Regards
MaheshHi Mahesh,
Try this ..
Assign the same group to those fields , say GRP
in PAI
IF <CONDITION>
Loop at screen.
if screen-group1 = 'GRP'.
screen-required = '1'.
modify screen.
endif.
endloop.
ENDIF. -
Need to make some fields mandatory in standard transaction XK01
HI All,
Is it possiable to make some fields in standard transaction like XK01 mandatory?
or any work around ?
thank in advance for your replies.
Regads,
Riyaz.Hi,
From configuration(SPRO) u can easily make some fields mandatory in XK01. Otherwise create a transaction varition for XK01 using TC SHD0.
Rewards points if helpful.
Regards,
Srinivas Ch -
Ho to make a variable mandatory or optional?
Hi All,
Please let me know where in the Query designer is the option to make a variable mandatory or optional?
Thanks!Hi All,
Thanks for the reply, that was very helpful. But now when i right click on the selected variable, the screen where i cud edit shows up and i see that variable entry is "Optional" & i need to change that to Mandatory but the problem is the screen is blanked out, that is i cannot make any changes, i can only see but not edit. But there are some other variables were i can change them from optional to mandatory but not this one...can you pls throw some light on this?
Thanks a lot! -
Make Assembly field mandatory in IW24
Hi , This is Arvind NN ,
In IW24 Create Malfunction.
Under Field Assembly i like to make that Assembly field Mandatory for both N2 and N4.
Thanks and Regards
Arvind NNHi Aravind,
Please make the field mandatory in OMBW.
Regards,
Srinivas Muthyala -
How can i make reference field mandatory in MIRO?
Hi Experts,
How can i make reference field mandatory in MIRO screen.
Reference field is not available in field status group.
I have checkedthe reference number in RE document types in OBA7 .
But still without entering anything in reference field in MIRO,the document is getting save.
Any other solution??
Regards,
Sumeya offrinHi
Strange....what you did should work.
Was an accounting document created for this MIRO? Was it RE type?
Ofer -
Is it possible to make department field mandatory in T.code KS01
Hi all,
I need to make Department field mandatroy in Transaction 'KS01' Create cost center
Is it possible to make department field mandatory.
Pls suggest me if any possibilities.
Thanks & Regards
BhaskarHi,
To add to above, Just check this point:
SAP does not support implementation of new fields exits from ECC 6.0. It will still support the existing field exits in the system
Also check if you can create the field exits from program RSMODPRF..
Regards
Shiva -
Make one field mandatory in material master
hello
i have searched through the forums but not able to get the right answer.
i need to make one field MARC-MMSTA mandatory. It lies in field selection group 51.
There are other fields in this field selection group.
Hence what happens is when we make the group mandatory all the fields become manadatory.
Any thoughts please ?
Thank you.
Regards
KKHi,
In t-code OMSR create the new selection group(Between 221 to 240) ie., select the field MARC-MMSTA assgin new selection group .Then goto OMS9 enter selection group make option as per your requirement.
Let me know any issue.
Regards,
Vairavan.P -
How can i make a field mandatory in SO header .
Dear expart
How can i make Customer group mandatory in SO header data.Under sales tab pricing and static.
Plz give me spro or the direct transaction code if any.
YeasinHi Yeasin,
There are three ways.
1) By using incompletion procedure by using OVA2 T.Code which is already discussed by Raja.After this assign this incompletion procudere to your document type in VOV8 and also check the box incompletion messages.
2)By using SHD0 T.Code.
Goto SHD0 T.Code.
Enter the transaction code as "VA01".
Select the transaction variant as "BUS2032".
Two programs will appear .Select the last one(BUS2032_4480).Click on details.
Search for the field "VBKD-KDGRP" using "CTRL+F".
Against that field tick the mark Required.
Save.
3) By using SE51 T.Code.
Enter the program name as "SAPMV45A" and screen number as "4301".
Select Layout editor.
Click on Change.
The screen layout will be opened.
Select the field "Customer group" and double clik on it.
Attributes screen will be opened.
Goto Program tab and for the Input field,tick this and for input select the option required from the dropdown.
Save.
Now If you then you can find it as mandatory.Among these three you can use any one.
Regards,
Krishna.
Maybe you are looking for
-
Propagation of Credentials from ADF Pages to BPEL
It is easy and straightforward to call web services from ADF pages. But I am a bit confused about the security issues around use of BPEL and OWSM with ADF. Suppose that I have authenticated against an LDAP to access an ADF page and the page make call
-
Inactive InfoObjects in MultiProvider based on InfoSet after Upgrade NW04s
We are upgrading our sandbox environment from BW 3.5 to NetWeaver 2004s or BI 7.0. We have done a technical upgrade and are currently using the obsolete authorizations. In testing we have discovered that our MultiProviders that are based on InfoSets
-
What can I use in place of adobe acrobat?
What do I need to view sites requiring Adobe Acrobat reader?
-
Oracle Map Builder Network Models
We are working on a project that displays road networks in Oracle Map Builder. Many of the network tables were irrevelant so they were deleted in SQL Developer. However, in Oracle MapBuilder all the Network Tables are still listed. Does anyone know h
-
Hi Im doing a File-RFC-File scenario wothout BPM. Getting the following error in RFC reveiver Adapter <SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused b