Make A headphone mix for vocalist using saphirepro14 interface

Hi. Can someone tell me the best way to set up a headphone mix in logic x. I have a saphire pro 14 interface and was wondering what the best way to be able to increase/decrease volumes of headphone mix for vocalist while not affecting the level of the overall mix. Any ideas or techniques would be greatly appreciated...i have seen videos talking about bussing out sends, but was wondering if there is a better way or anything more specific for the saphire pro14 interface...thanks

Here's an (admittedly busy) example of how I do it:
Note that all of the MON1 sends go to the channel strip marked Mon1(9). The output of this bus goes to Pamp1 (RED - right after the stereo outs), which is actually my RME's output 3&4. I labeled in Pamp1 or Phamp1 (sorry for the inconsistency) because that physical output goes to one of my headpone amps.
Just for additional info, the output (RED) marked 'Phone B' goes directly to my RME's embedded headphone output (which happens to be output 9&10 on my RME).
Hopefully this didn't confuse things further.

Similar Messages

How make an appear windows for the use and enter one value?

Hi everybody,
I posted already once but my post has disappeared.
I am new in programming with labview.
I am doing an intern ship in a company and I would like to Improve an existing software.
The purpose of the software is to a syringe pump manages to fill a nozzle (connected to
an atomizer) and After spraying has pricise Amount on flies.
So, first, the software Was Divided in to share. I made folders to put in one.
-> Until this, it works
Now I would like to make a program executive for purpose That I-have to, first, find a solution
to control the syringe pump. I explain my self: When I am running the software, the syringe
pump start to run by himself and the User has not the time to enter some values. For safe, I tried
put a button to start the problem Is That goal block the software Spraying Because it s use as a
SubVI. So My idea: I would like to bring-up has windows, Where the user can enter all His gains
push a button and OK to run the software.
If someone HAS an idea Will it really help me !!
Have a good day
Anais

Sounds like you are just looking for a simple dialog box with some fields for the user to enter the required parameters. There are lots of examples if you look around, but here is a quick simple one. The three values enterd are bundled into a cluster for convenience, and it includes a 'cancelled' output in case the user changes his mind.

Can i make a new layout for magento using Muse?

The company i work for has a site on magento, an e-commerce (duh) and i would really like to give it a completely new look.
Is this possible using adobe muse? Im not a programmer i know the basics and i have some great ideas but i need to know
if i can make this happen on muse and then throw it on magento. Does anyone know how or have any experience?
Thanks!

Hi,
Using Adobe muse you can develop a website, but you will not be able to use it as Magento theme directly. You will need to Export your site as html (in Muse) and make some changes in the html part, that is used in magento. You can check this guide, how you develop Magento theme from html
Tutorial: Introduction to Magento Theme Development
Hope this helps.

How do I make a publication interactive for web use?

I have Design Premium CS5.5. I created a publication in In Design and would like to make it interactive (turn pages and search capability) and place it on my website. What software in my Design Premium package would I use to do this?

There is no such thing. Web design has completely different requirements and fancies like page turns require at least some knowledge of JavaScript programming for instance as a search function would require a dynamic backend infrastructure based on PHP or similar. You basically have to rebuild it from scratch using native web techniques.
Mylenium

How to set up a pro headphone mix in logic express 8

using logic express 8 software, avalon tube amp, 4 channel head phone mixer, yamaha O1V digital mixer and running through a line 6 toneport UX2 unit cant figure out how to get a nice individual headphone mix for vocals with effect inserts inside logic express 8 don't care how to achieve it just need to do it thanks

I've copied above post and corrected confusing language. Sorry I was typing too fast.
Cheers
Dee
Hi
To run RMX multi timbrally in stereo mode:
Go to RMX in the environment. Change the MIDI channel of RMX to "all".
Create a multi instrument (using the new menu). It's a good idea to rename the mulit to RMX Multi. Cable multi instrument icon to the RMX channel using arrow tool. (Chose "remove" if a dialogue box promots you to "Remove channels port setting?").
Beginning on channel 8 move backwards and click 8 thru 1on the multi instrument using the Midi tool.
Go back to the arrange window. You should see a track called "RMX Multi 1" (if you renamed the Multi in environment "RMX Multi").
Create a new track for the remaining of the 8 Midi channels (if your Multi requires 8 channels). Also .. create an instrument tracks and assign it to RMX - that is your master RMX track where RMX is instansiated.
You now have a master track where RMX is instansiated and one track for each of your 8 channels within RMX.
You can play/place MIDI data in to each of the MIDI tracks - or drag and drop from RMX into any of these sub channels. You can also use automation on these. For any DSP use the master track.
To run RMX as a multi:
Essentially it's the same thing. Except in the mixer section of RMX assign track 2 to output B, track 3 to output C, etc ....
Go to the environment and create a stereo aux track for each MIDI channel you need in your multi. In the input section of the aux strip assign as follows: for B, 3/4, for C 5/6, etc ... (A is 1/2 and is where you have your instance of RMX).
The only advantage of multi mode is if you need discreet DSP on individual tracks.
In Stereo multi timbral mode you can freeze tracks.
Hope this helps.
Let me know.
Cheers
Dee

Can i make a video and use an external mixer for the sound?

can i make a video and use an external mixer for the sound with my ipod touch?

You need a special plug to use the iPod's mic in for the headphone jack. If you compare a headphone plug for a set that includes a mic and one that does not you can see that there is a difference.

Can I use a Bluetooth headphone/microphone for capture sound instead of normal iPhone mic when shooting video?

Can I use a Bluetooth headphone/microphone for capture sound instead of normal iPhone mic when shooting video?
The sound when I record video is not so good, so I'm trying to use the Bluetooth headphone/microphone to capture a person voice but not know which setting to use.

Hi Robert
Thanks for answering. I didn't know where to post other than the bluetooth forum which is relatively quiet and had no answers forthcoming.
Yes the voice isn't reaching the amp although it is registering on the input bar in the Sound System Prefs, just won't "play through" as it were. I can't see how it could be done I was just hoping someone might see something I am missing.
It seems a shame that you can't do it as iTunes on an old iBook makes a good juke box for DJ'ing and with everything becoming wireless these days it seems sensible that you could cut that one last wire.
Mike

Does a mixed N and G network make the network slower for the N-enabled?

Hello all,
I was just admiring my Airport Extreme box after registering it, and I noticed this bit of fine print:
"Speed and range will be less if an 802.11a/b/g product joins the network."
Does this mean that my 802.11g printer makes the network slower for my two 802.11n macbooks?

Okay,
For a follow up: I'm using the "guest" network for all my G-level wireless devices, and the regular network from all my N devices.
Does that overcome the mixed network limitations? It seems like it wouldn't - because the Airport is basically creating two virtual networks out of one network. Or are there two individual networks on the Airport?
Thanks!

How to make a photo STAY in the assets panel for future use for In browser editing?

How to make a photo STAY in the assets panel for future use for In browser editing?
When I delete a photo from a page, it does not stay in the assets panel. My client uses in browser editing daily. Once a week he changes a photo just for a day, then needs the previous photo to replace it. The original photo is not in the asset panel (or folder) for him to choose.
When you upload a photo, it has an arrow in the asset panel. How do you use this as an asset?

Sure ... right mouse click on your page and choose 'Exclude Page from Menus' :-)

I cant make a copy of a purchased dvd (for personal use)

Ok, please help,
i made a copy, using disk utility, of a dvd (which i own). What has resulted is this: i have two files on my desktop 1. dracula.cdr and 2. disk2.dmg
these i know are video files, but they seem useless. when i dbl click them i end up with two seperate DVD_VIDEO icons on my desktop, i think these are called volumes. Anyway, they are both 7.21GB which is too large for my 4.7GB DVD-R (and at this stage i don't want to even think about trying to split over two disks!)
But what annoys me is that i can't even view the dvd content that is on my hard drive, let alone burn it to disk!!
What on earth am i missing?? Apart from necessary brain cells..
Thanks,
Anthony
imac G5 Mac OS X (10.4.2)

More important, it is beyond the scope of this discussion group, which is intended to cover the use of the iDVD application. This isn't a discussion group about all Apple/DVD issues, it is a discussion group about iDVD-5.
That said, to the original poster, visit http://www.videohelp.com and you might have more luck finding the kind of details you need.
Oh, and is CSS really intended to be disc copy protection? Think about it: What good does it do to encrypt a file and then include the keys in the DVD player? If you copy the disc, leaving the CSS intact, the copy will still play in a DVD player. CSS doesn't prevent discs from being copied. I haven't tried, but I wouldn't be at all surprised if DVD Player.app can play the VIDEO_TS file ripped from a commercial DVD and NOT decrypted.
CSS is patent protection for DVD players. If you build a DVD player and you don't pay the license for the CSS keys, your knockoff DVD player won't play most content. The side effect is that it makes it more difficult for end users to excerpt scenes.
--Dave Althoff, Jr.

What is an alternative to bins? Sometimes I want to make custom transitions and I need a place to store them for easy use.

What is an alternative to bins? Sometimes I want to make custom transitions and I need a place to store them for easy use.

Either projects or events. You can make a compound clip in a event used to hold favorites. Add a couple of generator items to it and apply the custom transition. You can copy and paste from the compound clip to any project. Hold everything you want into the one event. It probably won't ever get very big, and the render files can be dumped at any time. You can simply move the event from machine to machine or place to place as needed, just as you can other custom content, like keyboard layouts and custom color presets.

Hey guyz.. i wanna ask if i get an updated version from itunes when i plug my iPhone into the Pc, i get a letter tells me that there is an update for your iPhone ... i wanna ask is it safe to download ?? and does it make any side effects on longTerm using

hey guyz.. i wanna ask if i get an updated version from itunes when i plug my iPhone into the Pc, i get a letter tells me that there is an update for your iPhone ... i wanna ask is it safe to download ?? and does it make any side effects on longTerm using ??

It is safe to download if your phone is not jailbroken. Before you download it, however, take some precautions:
Reboot your computer
Disable your antivirus and firewall
Connect the phone cable to a USB port directly on the computer, not a hub
Before updating right click on the name of the phone in iTunes and choose "Backup"
When you are given the choice choose "Download only", not "Download and Update"
After the download completes successfully click the Update button to install it.
Most of these steps are just being overly cautious, as most people ignore them and have no problems. But occasionally the extra steps save grief.

How do I make groups for texting multiple people at a time and retain that group for future use?

How do I make goups, in Contacts, for texting multiple people at a time and retain that group for future use?

How do I make goups, in Contacts, for texting multiple people at a time and retain that group for future use?

Will pages automatically reformat to correct size when using Folio Builder or do I have to make pages iPad format, for example, in InDesign document set up from the start?

Will pages automatically reformat to correct size when using Folio Builder or do I have to make pages iPad format, for example, in InDesign document set up from the start?

Moved to DPS forum.
You need to set up the pages appropriately for the target device. For iPad that's 1024x768.

Headphone amp for use with i-mac

Hi,
Im looking for a headphone amplifier for use with my i-mac and logic 9, im using a pair of sennheiser HD 650's, can anyone recommend one?
Thanx...

You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
http://www.macupdate.com/app/mac/24481/ntfs-3g
If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

Make A headphone mix for vocalist using saphirepro14 interface

Similar Messages

Maybe you are looking for