Make a image file

it is possible to make a image file with thee thing i've done in a jPanel (like .gif, .jpeg or others)???
if not with a JPanel but with other component or the applet enterily, please said it
thx for help
scuse with my english

What are you trying to capture? The whole panel with components or just a Graphics pallete?

Similar Messages

How to make a image file from Pre installed Mac osx ? "PLEASE HELP :("?

hey guys ..Thanks u for the time.
So i have this eMac which has crashed and i have got may hands on another eMac.. and it works
... the only problem is.. I can take my eMac to the working eMac to do Target Mode or any thing...
So Help me..
My question is .. Is there a way to make a .DMG image file from pre installed mac osx OR
Is there a way to may a recovery disc??

You can use Carbon Copy Cloner to copy everything from the working eMac onto the non-working eMac while the working eMac is running. If your eMac will still do target mode into the working one, you can download the above software, select the booted drive as the source drive, and your eMac's drive as the target, however it is possible this will not work.
When you say your eMac crashed, what exactly happened? It is possible that the hard drive in your eMac failed or is failing, so in order to get it running again you would need to replace the hard drive. On the eMac, this repair is somewhat involved, and you have to be very careful because it exposes the CRT, which has several areas which can be extremely dangerous to touch if not properly handled. CRTs retain a great deal of voltage, even when unplugged, sometimes for weeks, and they can give you a nasty shock if you touch them in the wrong place.
Also keep in mind that cloning from the working computer to the non-working computer will ERASE any data that you have stored on that eMac, so if you don't have it backed up anywhere, you may want to attempt that with target mode before proceeding.
Good luck!

How can I make an image file from/to a V240 SPARC workstation?

Scenerio: I have 4 V240 SPARC Workstations on a network. 1 of these servers is set up the way I want it with all necessary applications and drivers. I had assistance from a number of good people to do this and now I want to preserve this scsi image and put it on all the other workstations. I have tried to use G4U but the SPARC system will not boot from the cd. This cd is usable on other x86 systems. Is there something different with "SPARC" as compared to "x86"? Is it possible to get some "freeware/shareware" software that will allow me to perform the similar functionality as G4U for the SPARC system? If not, how is imaging performed on SPARC and by what?
Thanks in advance
Pandah

SPARC and x86 have entirely different instruction sets. A SPARC system (as you found out), will not run x86 code.
Have you looked into Solaris Jumpstart technology?

Try to make windows xp image file.

ok i have a couple problems make the image file. ok i downloaded an the complete contente of the cd in ZIP from an internet source. BBut the problem i ave is that some of the files are BIN. can i leave this the way it is and just make the image file or do i need to change this

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your desktop computer displays a black screen and does not continue installing Windows XP. I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number.
How Do I Find My Model Number or Product Number?
Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
Cheers!

What compression type to use for disk image files

Hello all
I was wondering if a more experienced user than me could give a recommendation as to which compression format I should use to compress an image I made of my / partition. I used dd to make the image file.
For me, (de)compression time is more important than compression ratio (size), but I'm of course looking for a good blend of both
Thanks for any advice

If you have a multicore processor, use pigz instead of gzip etc. Start with this app and only after you're not happy with it, look for one that's faster / compresses better.
BTW, do you have a lot of incompressible data in there? Movies, pics, music and already compressed files won't compress any more.
Last edited by karol (2011-01-29 16:16:03)

Sorry I'm new to Final Cut Express. How do you make an image (jpeg file for example) move across the screen slowly as I've seen in many films.

Sorry I'm new to Final Cut Express. How do you make an image (jpeg file for example) move across the screen slowly as I've seen in many films.

Neil from bristol wrote:
… How do you make an image … move across the screen …
by setting KEYFRAMES
(read, what FC/e's built-in Help-feature tells about it)
resize and set pic to start position
set keyframe
move playhead in timeline to desired length
set pic to end position
set keyframe …

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

Why Bridge (CS5) does not make a PDF file from multiple images

Why Bridge (CS5) does not make a PDF file from multiple images? It used to work fine earlier, but now nothing happens when using OUTPUT for web or PDF.
I have uninstalled and installed my PS three times allready, so please not suggest that, it didn't help.
I have Creative Suite Premium, mac os x 10.6.8

Hi. You’ve posted your question in a forum that is for beginners trying to learn the basics of Photoshop. I'm moving your question to the Bridge forum for specialized attention to your situation.

Trying to edit a file in Acrobat, I select the image, right click-edit image. Opens in Photoshop, I make correction, but file updates back in Acrobat at a lower resolution

Trying to edit a file in Acrobat, I select the image, right click-edit image. Opens in Photoshop, I make correction, but file updates back in Acrobat at a lower resolution

What was the resolution before and after?

DVDSP3-Can You Make A Disk Image File From DVDSP3?

*Hello again. I'm just finishing up my first go around w/DVDSP3. I was surprised that when I got to the burning options, that there was no option for burning a disk image file. Is it do-able on this program?*
*I burned out one disk and tested it on a couple different players, and "finally" it was good. After the burn, the prompt just said "Formatting finished". There was no option to burn another disk, nor could I find any place to bring up a menu, to tell it that I needed 4 disks. Therefore, it was hours just to get 4-15minute dvds burned, as it started the build all over again each time. Thanks again for the help!*
LarryWest

In the Format - even the Build and Format too - dialog, you have an option to write the disc to the hard drive.
If you need to make a copy at a later date (even after you've nuked everything from your hard drives, you can use Disk Utility in OS X to make a disc image from an existing DVD-R, then burn additional copies.

Make Ps create thumbnails for CR2 image files

It's frustrating trying to find an images with cryptic camera file names. Why doesn't Ps create thumbnail images of those file types?

Just as a bit of follow-up, with appropriate codecs these things are entirely doable....
Windows Explorer browsing of many different image file types in Thumbnail view:
File Open dialog from Photoshop showing image preview:
Even Microsoft Photo Viewer works:
-Noel

Iphoto export makes image files disappear

I export 200 Jpg and mp4 files from iphoto to a network disk folder. After export, finder only shows the 20 mp4 files. When I try to export one or more of the jpg files a second time, I'm told the files already exist. I just want to make sure my files are safe and can be accessed by other computers and photo software.

from iphoto to a network disk folder.
Try export to a Folder on the Desktop and then drag that to your Network Disk. I'm pretty sure this issue is caused by the format of your NAS.
Regards
TD

Error "A web exception has occurred during file upload" when trying to import ESXi image file into Update Manager

I'm encountering this error and not sure how to fix, I'm quite new to vCenter so please bear with me.
I'm trying out vCenter 5.1 with Update Manager 5.1 right now. No license key has been entered and I still have 50 odd days to try it out.
2 ESXi hosts are being managed by this vCenter, and they're both running ESXi 4.0
I'm looking to use Update Manager to try to upgrade the ESXi 4.0 hosts to ESXi 5.1
I downloaded the image file VMware-VIMSetup-all-5.1.0-799735.iso from VMWare website, and is looking to import it using the Update Manager so I can update the ESXi hosts, but I keep on getting the error:
File name: VMware-VIMSetup-all-5.1.0-799735.iso
Failed to transfer data
Error was: A web exception has occurred during file upload
I tried importing it by using vSphere client to connect to vCenter server both remotely and locally, with firewall disabled.
I've read http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1026602
I've disabled firewall, and there is no anti-virus program on the server. I've also restarted the machine several times, to no avail, I didn't reinstall update manager because the whole Windows and VCenter installations are clean from scratch.
I logged into the vSphere Client using Active Directory credentials, and I've made all Domain Admins (which my account is a member of) part of the administrator group on the vCenter server. I can't log in using admin@System-Domain because it tells me I don't have permissions for it, I still haven't really had the chance to figure out why that is and not sure if that makes a difference.
Also, I'm fairly certain I'm using the right image file, as I've burned some DVD's used that image file to upgrade some other ESXi hosts. Unless there's a special image file I need to download?
I'm at lost on what I can do to make it work. Please advise.
Thanks.

The ISO file you mentioned is the one for vCenter Server. What you need is the "VMware-VMvisor-Installer-5.1.0-799733.x86_64.iso" (or VMware-VMvisor-Installer-201210001-838463.x86_64.iso) for the ESXi host.
André

Disc image file exported from Encore CS4 won't work

Hello,
I have a problem concerning the export of a disc image file in Encore CS4. I recently upgraded to CS4 and wanted to continue my project which I started editing with CS3. While working with CS3 I already did image files from this project for burning and testing the DVD. Back then it worked with no problems.
However, since using the CS4 version Encore does the image without any problem, but I can't use the image file in any way afterwards. I mounted it with Daemon Tools as I did before, but the DVD won't play in any software DVD player I have installed (Media Player Classic, Windows Media Player, Nero Showtime) nor can I access the file structure over a file manager. Nevertheless NeroInfoTool and ImgBurn say there is a DVD in the virtual drive. Then I exported the DVD project into a folder and now I can see the files in the file manger but again no player will play it.
Has anyone experienced this before and is able to help? It would be very appreciated since I don't want to downgrade back to CS3 :-)
It's Encore CS4, Version 4.0.1.048 on a 2,8 GHz HT CPU, 2 GB RAM, Nvidia Geforce 6800 UT, lots of HDD space, XP + SP3.
Thank you,
Chris...

Hey,
thank you both. As I said no player accepts the project exported to a folder. It doesn't matter if I point the player to the video_ts.ifo or just the folder - it won't play. As a consequence I re-installed Encore CS3 in which exporting worked fine and guess what - the exported image and folder output doesn't work either. Since it worked before in CS3 it comes down to the conclusion that either I did some editing to the project that screwed the project or Encore CS4 did. Checking for mistakes in the project and previewing in inside CS4 everything seems fine. So might it be CS4 that ****** up the project file??? I mean it's full of strange bugs so it could easily be that. I even updated my Daemon Tools yesterday and it won't make a difference.
Or could it be something else I haven't considered yet? Any ideas? I just don't want to build the whole project again which might not even work if it's some other error. This is a desperate call for help
Thanks,
Chris...

How to Copy an Image File from a Folder to another Folder

i face the problem of copying an image file from a folder to another folder by coding. i not really know which method to use so i need some reference about it. hope to get reply soon, thx :)

Try this code. Make an object of this class and call
copyTo method.
import java.io.*;
import java.net.*;
import java.util.*;
public class FileUtil
extends File {
public FileUtil(String pathname) throws
NullPointerException {
super(pathname);
public void copyTo(File dest) throws Exception {
File parent = dest.getParentFile();
parent.mkdirs();
FileInputStream in = new FileInputStream(this); //
Open the source file
FileOutputStream out = new FileOutputStream(dest); //
Open the destination file
byte[] buffer = new byte[4096]; // Create an input
buffer
int bytes_read;
while ( (bytes_read = in.read(buffer)) != -1) { //
Keep reading until the end
out.write(buffer, 0, bytes_read);
in.close(); // Close the file
out.close(); // Close the file
This is poor object-oriented design. Use derivation only when you have to override methods -- this is just
a static utility method hiding here.

Make a image file

Similar Messages

Maybe you are looking for