Make an editable View read only?

Hi!
Is it possible to make an editable view readonly? I need it for closing a month. If data of a closed month is displayed the the view should be readonly.
Thanks & regards
Kai

You can make an editable view RO by changing the attribute Updateable Propery appropriately in the EO if this is what you really want. Or you could just create a Read Only VO from scratch.

Similar Messages

How to use same view as editable and read only in ADF

Hi,
how to use same view as editable and read only in ADF ?? How can we achieve this in TF's ???
-mrudul

Hi,
Steven Davelaar wrote a presentation about this "Building Highly Reusable Taskflows"
Starting slide 14 is where your use case comes into play
Frank

How to make few DFF fields read only in Forms

Hello.....
I am having an Issue in forms customization through custom.pll
I need to make few DFF fields read only in HRMS enter and maintain form through custom.pll
I tried with fnd_descr_flex.update_definition but in vain
So please help me how to rectify this issue.
Edited by: user.nazeer25 on Jul 9, 2010 5:27 AM

Hello,
Wrong forum.
Ask this kind of question in the E-Business Suite forum ;-)
Francois

Make a volume mount read-only

Rather than dig for my Mac OS X Server DVD, I find it easier to clone the disc onto a small partition on a hard drive.
However, the volume always mounts read-write, and I always get warnings about low disk space because of it. (I made the partition as small as possible.) Plus, I don't want to have anything mess with my Mac OS X Server "DVD".
I noticed that Mac OS X doesn't use fstab for mounting volumes… is there a way to make a disc mount read-only all of the time? (chmod -R a-w * doesn't cut it for me.)

I don't mean having it mount read-only when booting from it. I mean, while the server is running normally (not booted from the "disc").
For peace of mind, I'd like to have my "disc" always be read-only, just to make sure that it isn't modified unless I explicitly allow it.
On Linux, I could add "ro" to the mount options. Since Mac OS X doesn't use fstab, is there some plist that determines how volumes are mounted? I'd rather not edit the /etc/rc.* files unless absolutely necessary.

How to make a cell/column read only

HI All,
Is there any way to make a specific cell read only with in a specific data form?
Similarly is there any way to make whole column read only inside a specific data form?
I don't want to make changes in my dimension member (e.g Dynamic Calc), i want to make these changes at data form level because, these cell/column are read only at one form but on some other data form they are editable/enterable

If you want to make a column read only then have a look at asymettric columns in the planning admin doc, if you use them then you can make one of the columns read only.
If you want a make one cell read only then one method could be to use javascript, you could add an extra member which is dynamic calc and point to the original member with a formula but it doesn't sound like you want to do that.
Cheers
John
http://john-goodwin.blogspot.com/

How to make specific cell(s) read-only in a data-grid

Hi there!
Is there a way to make an specific cell read-only in a data-grid?
Best regards,
Ciro

Hi !
After some months... here is the solution:
Private WithEvents _gridTaste As DataGrid
Private Sub MyScreen_Created()
AddHandler FindControl("GridTaste").ControlAvailable,
Sub(s, e)
_gridTaste = CType(e.Control, DataGrid)
End Sub
End Sub
Private Sub _gridTaste_BeginningEdit(sender As Object, e As DataGridBeginningEditEventArgs) Handles _gridTaste.BeginningEdit
' I want do set the cell (2,0) as read only:
If e.Row.GetIndex = 2 AndAlso e.Column.DisplayIndex = 0 Then
e.Cancel = True
End If
End Sub
I hope this post help you too!
Best regards,
Ciro

How to make a DFF in read only mode

Hi All
There is a requirement to male an descriptive flexfield (in Puchasing PO Headers) i read only mode for all the users.
So that user must not select any values, Is any way to do this. Any workaround is possible ?
Regards

Hi;
Please follow below and see its helpful:
[Solved] How to make a DFF segment 'Read-Only' using Form Personalization?
Also check:
http://download-west.oracle.com/docs/cd/A60725_05/html/comnls/us/fnd/ogenff03.htm
Regard
Helios

How to make a column as read only for update integrator.

Hi All,
i came across one issue while creating integrator.
for update integrator i have column rowid.rowid is a parameter. by using this(rowid) i'am updating.i want to make rowid column as read only .
if i enable read only for rowid,then it is passing null as parameter and inserting new row instead of updating the row.
If any one came across this problem you can help me in fixing this issue.

Hi Sanket,
Thanks for reply.
i have created a dummy column and passed the value of the orginal column values to dummy cloumn. and hided the orginal column.
in this process i have come across same issue. it is not passing the value as parameter and instead of updating the row it is inserting an new row.
Any alternate for this scenario.
Thanks in advance.

How to make a DFF as Read only field

How to make a DFF as Read only field

Hi,
You can add the read only token ($RO$) to any of the segments in the list. For example:
segmentlist = "Context1|Segment1($RO$)|Segment2..."
Thanks,
Kumar

How to make a checkbox as read-only ?

Hi,
My current requirement is to make a checkbox as read-only. Previously, the checkbox has been declared as
PARAMETERS: cb_gr AS CHECKBOX DEFAULT 'X'.
Now am required to make this as read-only. There are <b>no screens</b> defined in the report containing this checkbox and so am not knowing where to give the statement
LOOP AT SCREEN.
**Make the checkbox as disabled**
ENDSCREEN.
It is known that this statement has to be given in the PBO of a screen. So kindly guide me at the earliest on how to resolve this issue.

Hi aISWARYA ,
Here is the Example for making the report parameter as Read only using the Report Event ,   Dont need and screen Number for it , becuase your selections itself is an Defualt 1000 screen which as   PAI & PBO , in which it maintains this Report Events in it .
"Change the Input Fields Dynamically in a Screen
'The following example may help you:
SELECTION-SCREEN BEGIN OF BLOCK 001.
PARAMETERS: P_MRU RADIOBUTTON GROUP SEL DEFAULT 'X' USER-COMMAND AC,
            P_PART RADIOBUTTON GROUP SEL.
    SELECT-OPTIONS P1 FOR <field> MODIF ID PRT.
    SELECT-OPTIONS G1 FOR <field> MODIF ID MRU.
SELECTION-SCREEN END OF BLOCK 001.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF P_MRU = 'X'.
      IF SCREEN-GROUP1 = 'PRT'.
        SCREEN-INPUT = '0'.
      ENDIF.
      IF SCREEN-GROUP1 = 'MRU'.
        SCREEN-INPUT = '1'.
      ENDIF.
ELSEIF P_PART = 'X'.
     IF SCREEN-GROUP1 = 'MRU'.
       SCREEN-INPUT = '0'.
     ENDIF.
     IF SCREEN-GROUP1 = 'PRT'.
       SCREEN-INPUT = '1'.
     ENDIF.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
Reward points if it is usefull .......
Girish

How to make a schema really READ ONLY

Our legacy database is on 11.2.0.1/Redhat. Last week, one developer by accident changed the legacy schema by executing drop/creat/alter table commands. This causes big problem. Now we want to make the legacy schema absolutely read only. Thus nobody can change the schemas object and data.
There were posts talked about make the tablespace toe read only. That stopped inserting/deleting but one can still change the schema objecs with create, drop and alter, e.g.11:31:41 SQL> create table DUMMY(dummy int);
Table created.
11:32:06 SQL> alter table dummy add ( address varchar(20));
Table altered.
11:24:14 SQL> drop table DUMMY ;
Table dropped.How can I stop this type of changes to the schema?

Revoked most privileges from user LCCH (this is the one I want its schema READ ONLY), only leftselect distinct privilege,admin_option from (
select r.role,user,r.privilege,r.admin_option from role_sys_PRIVS r
union
select 'sys',p.* from user_sys_PRIVS p order by 1,2,3
PRIVILEGE                                ADM
CREATE SESSION                           NO
SELECT ANY DICTIONARY                    NO
SELECT ANY TABLE                         NONow user LCCH can still create table in its own schema13:08:49 SQL> show user
USER is "LCCH"
13:08:56 SQL> create table lcch.DUMMY(dummy int);
Table created.
13:09:33 SQL> drop table dummy purge;
Table dropped.I double checked the privileges granted and confirm that schema has not role granted, no object privileges granted and only the above 3 system privileges granted.

API0259: The object cannot be edited in Read-Only mode!

All,
I'm getting the following error when trying to import an MDL file into my repository:
API0259: The object cannot be edited in Read-Only mode!
Does anyone know what this relates to?

Hmmmm, sounds like it is hanging up on a conflict with the configuration name from your source repository and the configuration names in your target. Not sure that I have time to try and replicate that on my own system today.
What I might suggest you try is to, on your source, set the project configuration back to the standard "DEFAULT_CONFIGURATION", get your module configured to use it, and re-export the mapping. Then you can fix your configuration back to where it should be.
Do the same re-configuration on the target prior to import and see if that resolves the problem.
Now, clearly this is not optimal and it would be really nice to find out WHY the conflict is occurring, but it would at least get this mapping imported for now.
Mike
And Vader, it is not that I don't have full faith that Oracle always raises the correct error message for a problem..... but, well, I've USED Oracle for too many years not to consider the possibility.
Case in point in OWB, try putting an invalid value into the OWB-supplied WB_Date_From_Julian function
e.g. select WB_Date_From_Julian(-1) from dual;
10:55:12 Error: ORA-21000: error number argument to raise_application_error of -1854 is out of range
ORA-06512: at "OWB_MGR.WB_DATE_FROM_JULIAN", line 7
because some bright puppy at Oracle decided to try and raise an Oracle Built-in Error via raise_application_error instead of just using "raise", and - of course - the Oracle error code isn't within the allowable range.
Error messages are nice, but you can't always trust 'em - which is why I look to expanded possibilities when neccessary.

How i can make text item as read only

hi
im trying to make a text item as read only so no one can write on it i tried to make it as display item but i neeed also to call lov when i double click on the text item in display item case u can not double click
so please how i can make text item as read only
and another thing
how i can change an item properties by code i mean when i click in one button the text item become visibile how i can change its property by code
thank u

You can set a text item's property to be non-updateable
You can change this programmatically with set_item_property()
:)

Best way to make all the items read-only in many pages for a resposibility?

Hi,
We have the following requirement:
We need to make all the fields read-only in 5 standard self-service pages for a particular responsibility. One way is to personalize these pages at responsibility level. Is there any other quick/better way to do it?
Highly appreciate your suggestions on this.
thanks,
Hem

Hem,
Personalisation is easiest and fastest way of doing this. The same requirement can be acheieved by extensions of CO by setting the bean properties rr by SPEL binding by extending VO.
But when I can get something done without coding at all that approach is best, I am sure u agree :)!
--Mukul

I would make the signature field read only until something is entered in the mandatory fields.

I would make the signature field read only until something is entered in the mandatory fields.

Mina,
You can use LiveCycle Designer's Action Builder to easily achieve this.
Please go through online documentation for the specific version of LiveCycle Designer that you are using.
It is intuitive and very easy to use Action Builder (You will find this option under Tools Menu item of Designer).
--Santosh

Make an editable View read only?

Similar Messages

Maybe you are looking for