MAKE AN IMAGE USING A FUNCTION

HI genius....
i want to make an image using the function 1/cos(RotAngle).The image will look like i have attached below.
faithfully.
akhil...
Attachments:
New folder1.jpg ‏59 KB

Hi Ragil,
the attached image just shows black/white stripes.
How is this related to "making the image using 1/cos(Angle)"???
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Similar Messages

Can not make still image using share in Final Cut Pro x

This is what I get when trying to make a still image under share.
(com.apple.Compressor.CompressorKit.ErrorDomain error -1.)
This is a new error message. Was able to make still image before.
Thanks for anny help in solving this problem.
Russ Andris

Hi again Russ,
just posted this over at Compressor because of the Compressor related error message I was getting wheN i tried to 'Share' a sill image from video.
Thanks for the tip Russ, I did not know that one. I had tried using cmd+shift+3 with Snapz Pro to screen capture which intially worked but then did not. I tried ditching the prefs and the apps with Digital Rebellion but had no luck in saving a still. But, I installed the new FCPX update and on first try I was able to export a stll frame, on one laptop anyway. BTW, must say, I am not keen on the 'Share' notion in an app like FCPX. What I considering I am doing when trying to obtain a stil image is exporting or saving not sharing. I hope Apple might considered amending such terminology, share seems appropriate for iTunes or iWeb but not FCPX.
One more thing, a truly odd one. Files marled as .mov from my Fujifilm X100 will not import into FCPX!!
That is truly amazing - Quicktime files not recognised by an Apple aplication!! Our trials are not over.
D

Problems reading BMP images using ReadImage function

I am trying to load BMP images using the IMAQ Vision ReadImage function (VB6). The images load as monochrome images.
I use the CWIMAQViewer1.Pallette as a parameter in the command.
Note: The images load fine when using Vision Assistant or other image viewing software.
Any ideas?
Thanks!

Sorry. Wrong forum. I'll repost on Machine Vision forum.

Using Analytic Functions

Hi all,
I am using ODI 11g(11.1.1.3.0) and I am trying to make an interface using analytic functions in the column mapping, something like below.
sum(salary) over (partition by .....)
The problem is that when ODI saw sum it assumes this as an aggregate function and puts group by. Is there any way to make ODI understand it is not an aggregate function?
I tried creating an option to specify whether it is analytic or not and updated IKM with no luck.
<%if ( odiRef.getUserExit("ANALYTIC").equals("1") ) { %>
<% } else { %>
<%=odiRef.getGrpBy(i)%>
<%=odiRef.getHaving(i)%>
<% } %>
Thanks in advance

Thanks for the reply.
But I think in ODI 11g getFrom() function is behaving differently, that is why it is not working.
When I check out the A.2.18 getFrom() Method from Substitution API Reference document, it says
Allows the retrieval of the SQL string of the FROM in the source SELECT clause for a given dataset. The FROM statement is built from tables and joins (and according to the SQL capabilities of the technologies) that are used in this dataset.
I think getfrom also retrieves group by clause, I create a step in IKM just with *<%=odiRef.getFrom(0)%>* and I can see that even that query generated has a group by clause

How to add Image in "SX_OBJECT_CONVERT_OTF_PDF" Function module

Hi,
We have scenario to add a BMP image from report to PDF format ,they are using the SX_OBJECT_CONVERT_OTF_PDF function module to generate the report in PDF ,so we want to know how to add a image(BMP) for this function module or is there any other function module to get the image in PDF format.
Replies would be appreciated.
Regards
Raghava

Hi Brad Bohn ,
We have the scenario were in we have two tabs (If click first tab output is displayed in excel with image using OLE functionality) for second tab output is displayed in PDF by using SX_OBJECT_CONVERT_OTF_PDF-Function module without the image(*.bmp).
Our requirement is to get image in PDF.
Please let us know which is the way to approach this scenario.
Regards,
Raghava

Make bode plot using Multisim connectivity toolbox

Hi
I have bulid low and high pass filter in Multisim and I would like to make bode plot in LabVIEW to demonstarte the functionality of these filters ( an interactive session for student to let them for example finding threshold voltage using bode plot garph)
I use Multisim connectivity ver 1 to connect Multisim to LabVIEW.Would you please help me how can I work with AC Sweep function of this toolbox and is it possible to make bode plot using this function.
Many thanks

Hi there en99,
Thanks for your post, I have had a look into this for you and have found the following information. In terms of using the Multisim connectivity kit, here is a good introduction of all the VIs an the roper ways to use the API functions.
http://zone.ni.com/devzone/cda/tut/p/id/7785
However, in terms of the Bode plot, this can only be done with the functions available in either the Sound and Vibration Module or, and more relevantly, the Control, Design and Simulation toolkit which are purchased separately. More information regarding this can be found at the following link:
http://sine.ni.com/nips/cds/view/p/lang/en/nid/203826
More information can be found in the linked Discussion Forum that I found asking a very similar question.
http://forums.ni.com/t5/Signal-Generators/how-to-make-bode-plots-in-Labview-7-1-without-using-Contro...
Hope this helps!
Liam A.
National Instruments
Applications Engineer

Using slideshow function yield very fuzzy/soft focus show. Same images in MS slideshow are sharp.

When I view a selection of images using the slideshow function in Bridge, (CS6) it significantly softens the focus of every image. If I view the same images in the MS slideshow viewer, the images, same screen size, of possibly even slightly larger, are very sharp. Why the problem? Typically I am working with 3-8 MB files.

Thanks for your reply and for the link. However, the link addresses the problem for TV appearance while mine was concerned about the playback on my iMac.
When I burned other DVDs from Keynote, there was no "blurring or fuzziness" with photos or text on playback with my iMac or TV!
Also, the playback was automatic when the disk was inserted. When the latest one was inserted, the disk icon etc had to be clicked for it to run after which full screen had to be selected as well.
I do not want to make a DVD from iDVD - just one that will run the slideshow.
Any other suggestions on burning would be appreciated.
Vernon

I would like to be able to size images by kilobytes instead of pixels--is this possible? I use I-Contact which requires a maximum of 70kb per image. For best quality I want to make the images as close to 70 as possible. Currently I choose a size of 300

I would like to be able to size images by kilobytes instead of pixels--is this possible? I use I-Contact which requires a maximum of 70kb per image. For best quality I want to make the images as close to 70 as possible. Currently I choose a size of 300 pixels on the shortest side but sometimes this gives me an image of slightly greater than 70kb and sometimes the image is just 30-40kb. Is there a way to be more precise in reaching but not exceeding 70 kb?

That is not a feature of iPhoto - suggest to Apple - iPhoto Menu ==> provide iPhoto feedback.
You can opnly resize using the available options and file size is not one of them
LN

I scanned an old image using my Epson NX515 printer, used GIMP to make some minor repairs on the image and printed it out. I noticed there were a number of evenly spaced thin blue lines across the image, approximately six of them.

I scanned an old image using my Epson NX515 printer, used GIMP to make some minor repairs on the image and printed it out. I noticed there were a number of evenly spaced thin blue lines across the image, approximately six of them. I opened & printed the image on my PC using PAINT.NET. No lines appeared. I sent the image to my daughter. She printed it and found no lines. I printed the image using Seahorse on my Mac and the lines still appeared. I used basically the same print settings on Mac and PC.

maahes wrote:
did so now, only now I'm getting a slightly different error: could not find udevd no such file or directory. I checked both grub.cfg's and my mkinitcpio.conf and there's no listing for udevd ....which I've never heard of, so I assumed it was a typo?
For clarification: udev is in the mkinitcpio.
I'm not sure whether I yet have a good intuition for how you have your machine set up, but I suspect you need to include a cryptdevice flag to the kernel in your grub config. The file isn't found because the kernel doesn't know your root directory needs decrypting first.
My setup is an LVM over LUKS over LVM sandwich. To boot into my system, the grub.cfg contains the line:
linux /vmlinuz-linux root=/dev/mapper/cryptvg-root cryptdevice=/dev/mapper/vg-crypt:root rootfstype=ext4 pcie_aspm=force acpi_osi=Linux acpi_backlight=vendor i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 ro
Now, most of those flags don't have anything to do with your problem, but note the cryptdevice. It tells the kernel it's dealing with an encrypted filesystem sitting in a logical volume called crypt on a volume group called vg. The bit after the colon tells the kernel to associate this encrypted filesystem with /dev/mapper/root.
As for how to fix your system, I'm afraid I still feel a bit fuzzy about how your LVM and encrypted layers relate to each other, whether you have LVM over LUKS, or LUKS over LVM, or something else. Was there a particular how-to that you followed?

Why there is no function to send images using Bluetooth ?

Well I was very much annoyed with my iphone when there were necessities of sending important images using bluetooth and transferring files, Well they should make something similar to it, Is there any solution well i think there might no .....
happy republic day 2015 and happy holi 2015

Bluetooth and WiFi Settings are moving to a top-level Setting in iOS 6.
You could just leave Bluetooth turned on. When not in use it has a negligible effect on battery life.

I have a photo of an ice surface and another of a flower. Now I want to create a merged photo with the flower lying under the ice. I understand that I shall use the function "Layer" and have even read in the manual and looked on a video, but that informat

I have a photo of an ice surface and another of a flower. Now I want to create a merged photo with the flower lying under the ice. I understand that I shall use the function "Layer" and have even read in the manual and looked on a video, but that information is not sufficiently detailed for me. I have tried several options, but I come now way. Generally it seems that your information is only for the ones who can, not for the people who can´t although it is we who really need to learn. Please give me a step by step (click by click) information on how I can get the ice above the flower and then make the ice partly transparent so the flower is seen underneath. Please send me an e-mail Erik Solbu [email protected]

Open a new document big enough for your image. Then additional open your ice and flower image as well. Copy each and paste it into your blank document. They will be placed on their own separate layers.
Make sure in your layers panel. (Bottom right) the ice is above the flower, by dragging it in place. In that same layers panel click the ice layer to select in and find the opacity meter above. Drag to the left until you get the effect you desire.

Why do QTVR interactive images do not function properly or at all?

QTVR interactive images do not function properly. Check this page out in firefox and then in safari and see the difference.....
http://www.edfruinphotography.com/MILLCITY_2.html

I have Safari 5.1.7. I am using Mac Snow Leopard.
That page is using Flash as well as Quicktime. With Firefox, when I drag the cursor, there is no movement until I let go of the button. That makes it very jerky.
You could try disabling hardware acceleration and see if that works better with Firefox, in Preferences > Advanced > General.

Looping thru tif images using OCR

I have this code below in powershell where I OCR a tif image and save it to a table in sql server. OCR is only working on the first page and not looping thru the tif image pages.
Can someone help me with the code to make it loop on my tif image pages ?
#Functions
#OCR Function
#param - imagepath(path the image to ocr)
Function OCR($imagepath) {
#create a new modi object
$modidoc = new-object -comobject modi.document
$modidoc.create($imagepath)
try{
#call the ocr method
$modidoc.ocr()
#single page document so I only need the item(0).layout text
$modidoc.images.item(0).layout.text
catch{
#catch the error and go on
return "Error"
Finally
#clean up the object
$modidoc = ""
} # end OCR function
#Function to update the fulltext field in imageskeyvalues table
#param ID(ID of table)
function SaveImagesKeyValues($ID, $fulltext)
$cmd = new-object system.data.sqlclient.sqlcommand
$cmd.connection = $sqlconnection
$s = "update dbo.Images_Local set fulltext = '" + ($fulltext.tostring()).replace('''','') + "' where ID = " + $ID.tostring()
$cmd.commandtext = $s
$a = $cmd.executenonquery()
} #end SaveImagesKeyValues
#Function to get the list of records to OCR
function GetImagesKeyValues()
$sqlda = new-object system.data.sqlclient.sqldataadapter
$datatable = new-object system.data.dataset
$sqlcommandselect = new-object system.data.sqlclient.sqlcommand
$sqlcommandselect.commandtext =
"select ID, FullImagePath, fulltext from images_Local
where (fulltext is null or fulltext like 'error%') order by ID "
#and (fulltext is null or fulltext like 'error%')
#"select b.batch_number, b.sequence_number,a.claimnumber, a.potentialamount,a.buyer, b.[document type],b.fulltext, c.imagelastmodified, c.image_path
#from cip.dbo.cip_mastertable a
#inner join imageskeyvalues b on a.claimnumber = substring(b.[claim number],2,6)
#inner join images c on b.batch_number = c.batch_number and b.sequence_number = c.sequence_number
#where (a.buyer = '006' or (a.buyer = '007' and a.potentialamount > 500000))
#and c.imagelastmodified >= '1/1/13'
#and b.[document type] = '2'
#order by c.imagelastmodified"
$sqlcommandselect.connection = $sqlconnection
$sqlda.selectcommand = $sqlcommandselect
#Fill the datatable and store the output in variable otherwise it shows in the output.
$trap = $sqlda.fill($datatable)
$datatable.tables[0]
#end GetImagesKeyValues
#End Functions
#Main
clear
#set the parent path to the working directory
$parentpath = "C:\Data\Portugal PRG\Images\Contratos SONAE 08-11\Imdex\"
#Create new sql connection
$sqlconnection = new-object system.data.sqlclient.sqlconnection
#Assign the connectionstring
$sqlconnection.connectionstring = "Server=ATL01L20969\SQLEXPRESS;Database=Sonae;integrated security=True"
#Open the connection
$sqlconnection.open()
#get the list of records that need ocr'd
$imageskeyvalues = getimageskeyvalues
#iterate through the list
foreach ($t in $imageskeyvalues){
#$completepath = $parentpath + $t.image_path
$completepath = $t.FullImagePath
#call the ocr function and put the results in the fulltext property
$t.fulltext = OCR $completepath
#give some bread crumbs to monitor the script
write-host "Saving " $t.ID
#update the database fulltext filed
Saveimageskeyvalues $t.ID $t.fulltext
}#end Main

Hi Abenitez,
Since the OCR is only working on the first page, as a workaround, please try to spilt the tiff files to multople single files:Tiff Splitter, and then you can use foreach to loop every files.
Refer to:
How to split a multipage TIFF file on Windows?
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang

MAKE A IMAGE FROM TILING OF SMALL IMAGES

HI,
I want to make IMAGE FILE using number of other image tiling together!! how?

What have you tried? What thoughts do you have? Have you looked at the Vision Utilities on the Vision and Motion Palette?
I've not done this, myself, but I did make a black-and-white checkerboard pattern (with the size of the checks an input parameter), outputting a 2D U8 array that was "turned into" an image. The functions necessary to "tile an image" do seem to be present in Vision Utilities.

Can not use TOUCH function on Nokia 6600 slide

Can not use TOUCH function on Nokia 6600 slide-
turned on sensor in phone settings, but when i touch the PHONE it does not work.
Please, tell me how use this function or maybe my phone is out of order

As long as your Sensor Settings are On within Menu, Settings, Phone, Sensor Settings then you just need to do the following -
Tapping
The tap function allows you to quickly
mute and reject calls and alarm tones, and
to display a clock just by double-tapping
the back or front of the phone when the
slide is closed.
Select Menu > Settings > Phone >
Sensor settings to activate the tap
function and vibration feedback.
Mute calls or alarms
Double-tap the phone.
Reject a call or snooze an alarm after
muting it
Double-tap the phone again.
Display the clock
Double-tap the phone.
(If you have missed calls or received new
messages, you must view them before you
can see the clock.)
Simply, if you double tap the screen when the slide is closed and you can see the clock appear then it is working.
I hope this makes it clearer for you.
Full Manual here - http://nds1.nokia.com/phones/files/guides/Nokia_6600_slide_UG_en.pdf

MAKE AN IMAGE USING A FUNCTION

Similar Messages

Maybe you are looking for