Make checkbox "Cancel all existing logons" not changeable

Dear SRM gurus!
we're facing problems with multiple logons of SRM web-users.
In SICF>BBPSTART> error pages --> logon pages -->configuration we activated "Check for multiple logon".
When users try to logon several times in SRM webui they get the warning-page "logon status check" with the checkbox "Cancel all existing logons".
Is it possible to make that checkbox "Cancel all existing logons" NOT editable to users.
Background: We want users not to login to the system twice or more times. So the "Cancel all existing logons" checkbox should always be set (greyed out).
Thanks a lot for your support.
Best regards,
Henning

Hi Jorge,
thanks for your answer.
I guess that parameter login/disable_multi_gui_login is not the solution for us.
Users do NOT log off correctly from webui. They just close the browser with the close button in the right upper corner. Then the session is still active and will only be killed automatically after a timeout of 2 hours.
When users want to log in again before these 2 hours are over they get the "multiple logon" page. There I want to the users to not be able to unmark the checkbox "Cancel all existing logons".
Thanks and best regards,
Henning

Similar Messages

L_window_manager- create_external_window( .. ) shows existing logons....

Hi,
I'm trying to open a seperate window to my main running component so that I can display messages in it for the main component.
I need to allow focus in both windows which is why i've used an external window.
Problem is I keep getting an initial logon screen in the new window as below. I have to press continue first which is kind of annoying.
Anyone know how to bypass this?
Thanks
Simon
You are already logged on to the system in the following sessions:
Cancel all existing logons
Continue

You can enable multiple login in two ways.
goto SICF and open service.
1.Navigate to default_host->sap->bc->bsp->sap->srm(double click on srm service)
2.Open Error Pages tab and clcik on Configuration button.
3.Check whether check for multiple logon is enabled.
or
goto RZ10
To allow the user to have multiple login in SAP R/3, one have to set the Profile Parameters u201CLogin/disable_multi_gui_loginu201D OR u201CLogin/multi_login_usersu201D.
1. Login/disable_multi_gui_login
Controls whether multiple logins are enabled or disabled. 0 = enable 1 = disable
2. Login/multi_login_users
Here a list user IDs can be deposited that would allow users a multiple login even though the multi login is generally disabled. The multiple login information are stored in the table URSR41_MLD.
Note: Select extented administration and clcik display. this is the place to maintain parameters.
Ref:
Configuration Settings
Login Parameters

Cancel all print jobs via command line

Hi there,
I'm trying to write a logout hook that cancels all existing print jobs on my client machines.
From the man pages of lprm I believe it should be:
lprm -
But when I run this as root I get the following returned:
lprm: The printer-uri attribute is required!
I used to run this using Apple Remote Desktop under 10.4 and it worked fine, it doesn't work now either remotely or as admin on the client itself.
Have things changed under Leopard?

Hi
+*". . . Have things changed under Leopard? . . ."*+
Absolutely. Did you have any doubts? For example apropos has disappeared yet the man page is still there. Its not the only thing that has disappeared. Clearly nicl had to go because of NetInfo's demise. These are just some of the differences I've found. No doubt there will be others?
You could look at the man pages for cancel and lp. They appear to be the same thing. Might be up to what you want?
Tony

Need to get info about tabelcontent if exist or not

hi,
i´m trying to findout, if an tabelcontent exist (with
cfif) to make some choice if exist or not.
i need the simpel order in cf
isDefined or not isDefinet works only with
sessionvariables?????
thx

What is a tablecontent?

When i make my fire fox off if not ask me to save my exis tab , then i have to make all the off , its creat problem

when i make my fire fox off if not ask me to save my exist tab , then i have to make all the off , its create problem. I am not able to pause my work.

Yes.
Did you before "purchase" a free app and then make in-app purchases.? Many free apps have in-app purchases the cost money. Did you pursue with iTunes the "unauthorized" purchases that you sad you did not make?
Contact iTunes

Why when I go to garageband and make a ring tone then try to sync it, It says all existing songs, movies and tv shows will be removed?

Why when I go to garageband and make a ring tone then try to sync it, It says all existing songs, movies and tv shows will be removed?

Oh ok. As far as music, no i have not synced music because it would load so much. I don't have movies or tv. I have never loaded ringtones before. So i am guessing they are connected to music. My apps do sync. So the best thing is to not sync and just drop them on my devices icon???
oh, if I check sync music the button for entire music library is selected how do I get Selected playlist, artists, ect. selected. Right now everthing is grayed out.

In ical I just added new calendars to a pre-existing calendar group, I can make events with these calendars, but not reminders, any suggestions?

in ical I just added new calendars to a pre-existing calendar group, I can make events with these calendars, but not reminders, any suggestions?

Hi,
Lion has changed the way reminders (todos as was) work. They now seem to need to be in a seperate calendar.
In iCal open the File menu and select New Reminder List... and select where to put it.
Best wishes
John M

Okay so i recorded a song but each part comes out as like take 1, i have 10 takes. how can i put them all together as one take, to make one song all in one take not small pieces of a song.

okay so i recorded a song but each part comes out as like take 1, i have 10 takes. how can i put them all together as one take, to make one song all in one take not small pieces of a song. like i hit record and sang the entire song but when i hit play it was in pieces not just one song like it was in ten takes. is there any way i can blend it all into one take, to make one clear song?

You're not very clear in stating your problem. Maybe it's terminology: "takes" in recording lingo (and in GB lingo) are different version of exactly the same part in a song, so you only want one of them in the end. Please tell us exactly what you did and what it is that you don't like.

How to make the price in PO to adopt from info-record and not changeable?

Hi Xperts,
Can somebody explain to me how to set the PO price to be adopted from the info-record and is NOT CHANGEABLE at the creation and change of PO screen. I know that i can configure the field selection for the PO type to be "price as display" only. Any other solution?
Thanks.

Hi!
tick the check box info-update at the item detail under master data tab in a PO.
its significance is as follows:-
Info record update
    Determines whether the prices and conditions of this purchase order item
    are suggested in future PO items.
Use
    Selecting InfoUpdate causes one of the following situations to occur:
        -   If just one info record (with or without plant) exists, it is
            updated.
        -   If no info record exists and "plant condition requirement" was
            specified in Customizing, an info record with plant is created.
            Otherwise, an info record without plant is created.
        -   If two info records exist (that is, one info record with plant
            and one without plant) the info record with plant is updated.
Dependencies
     You can specify that prices and conditions in purchasing info records
     are only allowed at plant level in the Purchasing IMG, under Conditions
     -> Define Condition Control at Plant Level.
Hope this helps you,
Regards,
Archit.

How to make valuation type field not changeable in delivery tab of PO

Hai friends,
I am new to badis..please guide me to solve the issue...
how to make valuation type field not changeable in delivery tab of PO...
The field shd be in display mode only ...actually...there a badi has been used before
to get valuation type from a ztable depending on material and plant...
Now ..my requirement is that the user shd not change the default value brought from the ztable...

Hi SRINIVAS,
You can achieve this from BADI only if BADI is allows you to do this. You cannot achieve everything from a BADI. Check if there is any expoting field in the methods that can be ticked for making the field in display mode. If not then you cannot achieve this from BADI.
The field you want to default to display is a standard or zfield. If z, then you can changethe attribute of the screen field to Output only.
Regards,
Manish

Text keeps disappearing when I select it to make type at all / make changes / edit. Type tool is not working. I am running CS6 on a Macbook Pro Retina (which I am hating!) 10.9.4 - wish I'd never upgraded.

Text keeps disappearing when I select it to make type at all / make changes / edit. Type tool is not working. I am running CS6 on a Macbook Pro Retina (which I am hating!) 10.9.4 - wish I'd never upgraded.
Photoshop General Discussion

The RAM needs specs as shown below.
Maximum Memory
16 GB (Actual) 8 GB (Apple)
Memory Slots
2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM

HT1925 I was trying to make sure that all my Apple software was uninstalled, and I still can't remove C:\Program Files\iPod\. I went to the Task Manager and it is not listed in the Processes tab. What do I do now?

I was trying to make sure that all my Apple software was uninstalled, and I still can't remove C:\Program Files\iPod\. I went to the Task Manager and it is not listed in the Processes tab. What do I do now?

Are you looking for iPodService.exe?
Might be better to run services.msc from the run dialog and shut down the service polietly.
tt2

ME22N : Item condition amount not changeable after a cancel document

Dear guru ,
I have created a purchase order , a position have two price condition PBXX and ZD30(custom).
I have executed a goods receipt and also a cancel document for the goods receipt.
If I try to change item condition amount for condition ZD30 the field is grey (not changeable). Instead item condition amount for condition PBXX is changeable.
I donu2019t understand this behaviour
Do you help me ?
Thanks.

Hi Cris,
In M/06 , select Ctype ZD30 and click Detail.
in "Changes which can be made" screen Amount/percentage will be ticked it means you cannt edit the amount in PO i.e. whichever indicator is ticked over here that value cannt be change in PO and whichever indicator is not ticked you can change the value in PO.
I hope this small piece of info. helps you to exactly unterstand the behaviour of Ctype.
Cheers
Manoj Singh

What can I do to make sure all my information (Notes Included) transfers to my new MacBook Pro when connecting for the first time?

I am about to connecting my Iphone to my new Macbook Pro for the first time. I just want to make sure that all my information: contacts, messages, notes, everything will still be on my phone. I just dont want to connect then find out I lost everything on my phone.
Help! I am really bad with technology...

When you first sync with a new iTunes library iTunes will delete any iTunes media from your phone and replace it with the media in the library being synced with. iTunes media includes things like apps, music, movies, tv shows, podcasts, books, custom ringtones and photos synced to your phone from a computer. If you are also syncing your contacts and calendars with your computer it will replace the ones on your phone with those on your computer. If your iTunes library, contacts, calendars and iPhoto are all empty, you will end up with all of these being empty on your phone.
To preserve these you need to follow the steps in the linked article. This will transfer purchased media from your phone to your iTunes library and transfer contacts and calendar entries to your Mac. As discussed in the guide, it will not transfer music not purchased from the iTunes store (which can only be done using 3rd party software such as the ones discussed) or photos synced to your phone from another computer (which can be transferred to your computer using an app like PhotoSync). These will need to done first or you will lose them, as discussed in the guide.

الترجمة I have a problem how can I cancel all operations evaluated by so I can use the service again in the same payment method because Apple stuck processes evaluated by on my account and I can not purchase again

الترجمة
I have a problem how can I cancel all operations evaluated by so I can use the service again in the same payment method because Apple stuck processes evaluated by on my account and I can not purchase again

If your CC was banned for fraudulent activity, you will need to use another CC. If the account was disabled, try changing the password to enable it at : https://appleid.apple.com
Otherwise, try contacting the iTunes store via : https://expresslane.apple.com , choosing iTunes and then iTunes store and from there selecting the topic as it pertains to your query.

Make checkbox "Cancel all existing logons" not changeable

Similar Messages

Maybe you are looking for