Make Deletion Status for Operation in Prodcution Order

Hello Experts,
Is there any Function Module or BAPI to make status for Operation as deletion in production order. i.e I0013 is the status for the operation.
Thanks In Adavnce
Dhiraj Dangore.

Hello,
Thanks for reply..
Let me explain the process we are following
I have two operations in an order.
Operation 1) Control Key M111(Internally Processed) - One component attached for this operation ( its a not stock item)
PR, PO and GR has been done and no issues in that.
Operation 2) Control key M222( Externally Processed) -
a) One Service attached with this operation which i want to delete from the order.
b) One Component also attached ( non stock item) and PR , PO, GR has been done for same.
For point a : Service is present in PR but not released therefore no PO , GR is done.
Now when i try to delete this serive from the operation then system does not allow me to do so. Also i want to delete from PR too and again i was not able to delete from it.
Please let me know how this can be possible.
Rgds
Himanshu

Similar Messages

Need help on to set User status for Operations in Maintenance order

Hi experts,
i am new to PM module.
i need to do BDC for IW31. i want to know some inforamtion
on user status for each opertaion.
my problem is ,, what is user status.
why it is saying order is not yet released when saving and status can not set.
in this cases how can i do BDC.

User status are something set in the configuration and specific to the company which SAP hasn't given in the system status.
May be in your system user status are configured to set only after the release of the order.
For doing the userstatus you may need to release the order, you can release the order thru bdc and then do bdc for user status. Also see below link
http://www.sap-img.com/plant/user-status-set-date-in-maintenance-order.htm

How to make it mandatory for a call off order to reference a contract.

Hi,
How do I make it mandatory for my call-off orders to reference contracts?
Thanks.

Hi,
Make the field: "Outline Agreement" in the field selection group assigned to your calloff PO document type.
Umakanth R

What are the values for operation code in order import open interface

Hi,
I am trying to create the sales order by populating the interface table and run the request import order i.e. open interace without standard OE APIs.
I am also populating the actions interface table i.e. OE_ACTIONS_IFACE_ALL along with header, line, & price adjustment tables to hold the order. The sales order creates successfully but it fails at holding action due to invalid operation code. It has been tried with ‘CREATE’, ‘UPDATE, ‘INSERT’ for operation code in action interface table but no use.
So my concern is what value needs to pass for operation code in action interface table.
Any help would appreciate.
Thanks,
Sai Krishna

If you are planning to apply holds, For holds the action is OE_Globals.G_APPLY_HOLD or APPLY_HOLD.
Thanks
Nagamohan

Remaining capacity requirements scheduled for operation in Planned Order

Hi all,
I'm workig with planned orders, and I need the "Remaining capacity requirements scheduled for operation" data to list it in a Z Report, but I don't know how to get it.
You can see the info in the "Detail Scheduling" of the planned order in MD13.
Anyone knows how to get the info? Any table or any FM to get it?
Points will be given for helping
Thanks in advance!

Did you ever find out where the planned order capacity information lives? I can find the production capacity information in table KBEZ, but it appears that there is no planned order info there.
Thanks,
Matthew Bruckner

Set Deletion Flag for the Preventive Maintenance Order

Hi,
I need to set the Deletion flag for the Service Order. Deletion flag available in the screen disabled. Please suggest.
also I need know under which I shall be able to set such deletions.
Thank you,
Vijaya

Hi Vijaya,
Pls refer the help.sap.com related to deletion flag for PM/CS Orders. Some of the check criteria mentioned below for your reference.
Before a deletion flag is set, the following requirements must be met:
u2022 Any manually added purchase requisitions or purchase orders for the order must be deleted first.
The balance of the actual costs for the order must be zero. This means that the deletion flag can only be activated if the order has already been settled, or if no actual costs were incurred for the order.
u2022 Commitments relating to the order must be deleted.
u2022 Unprocessed and incorrect goods movements must be processed.
When the deletion flag is activated, all remaining capacity requirements are deleted. A deletion indicator is also set in any open material reservations.
An order that has been flagged for deletion cannot be changed. However, you can cancel the deletion flag.
Thanks
Siva
Edited by: sivakumar kasi on Sep 3, 2009 12:09 PM
Pls set the Order as Techically completed (TECO) and check the deletion flag set.
Thanks
Siva

Colective Settlement and "CLSD"Status for Production and Maintenance Orders

Hi dear experts,
Is that possible to use transaction KO8G for collective settlement of Production Orders? Apparently it only works for Maintenance Orders.
The same applies for transaction CO99 for getting "Closed" status in Orders. Apparently it does not take the Production Orders, even if the selection "With CO Production Orders" is active. Is there any additional configuration we should do?!
We would like to do settlement (and mass set "Close" status after) for Production and Maintenance Orders at the same time.
Thanks in advance,
Lígia Moreira

Hi,
You can use CO88 for settlement of production orders. Normally, CO99 should take production orders if the flag is switched. Do you receive any error when you do it?
Regards,
Eli

User status for Notification and Work order

We generate Service Notification IW26. I have already configured user status like PMND (Planning order not done), AWOP (Awaiting ordered parts) etc. in the Work order a while ago. Now the user wants same User status to the Notification as well. I like to know from experts what is the value added to have the same user status for both Notification and Work Order?
Do you have any suggestions?

Hey Chandra,
The customer intent behind this requirement must be to check in reporting / List Display Transaction about the Order Status. If they want to know looking at a Pending Notification List about the Order Status, you can always provide similar report using SAP Query Builder or with help of your Developer.
Apart from that If the Requirement is to have these User Statuses in Notification itself, Please advice them that it will be extra activity while performing transaction.
I dont see any other benefit of having User Statuses added to Notification as well.
Do let me know if you have some more info on Why Customer is requesting this....
Regards,
Avi

User statuses for equipment,functional location,order,notification

Kindly suggest me which user statuses should be assigned to equipment,func. location,notification & order.
Regards,
Vivek

Vivek,
There is no rule or std instruction which user status to be assinged to equipment,FL, Notification or order. In std you may get some user status for equipment. notification etc. It doesnt mean that you should use it. User status are define /created base on the business requirement . a user status can be assigned to multiple object type such as equipment, notification ,order etc.
You can refer the std user status profile when you create your own. In order to know the detail of it object type. You can select the status profile >> click on the detail>> click on the object types.
Hope it is helpful to you.
if you want further detail please revert.
DP

Order Status for partial return sales order

Dear All,
I am facing an issue at my client for which I am unable to find an appropriate reason.
We have done a complete Sales order cycle: S.Ord - Delivery and Invoice (100qty). Now the customer returns a certain part of materials delivered (say 30qty). We are creating a sales order for this 30qty and creating a delivery (for 30qty) and credit memo.
The problem here is that the status of returns delivery and credit memo is closed but the status of this returns order is shown as being processed and also is reflected in open orders report.
Can anyone please suggest why this is shown as being processed and not as closed despite the returns order being fully delivered and invoiced?
Note: the Completion rule for Item category of my returns order is set to B-Item is completed after full quantity has been referenced. Is it because of this? What would be the implications if I make this blank? Any other suggestions too would be highly appreciated
Thanks and Regards,
Rohan Gudavalli

This is b'coz, you create Credit memo with reference to Return Order (sales order), not from return delivery.
Further, if you check the standard copying control for VTFL ( Source: LR & Target: G2), you will not find config for this.
In standard, we have standard Billing doc type for this, that is RE - Credit for Returns (VOFA order-related billing VTFA).
So your standard process flow can be.
RE (Return Order)
-> LR (Return Delivery)
-> RE (Credit for Returns)
FYI, you can refer routine 2 - Ord-rel.credit memo from VOFM - Data transfer - Billing Document.
And that is the reason, why it is recommended to take Sales order as reference, instead of invoice.
Also, refer/check copying control config for VTFA for Return Order - RE to Credit for Returns - RE for Item category REN
Regards
JP

Erecruiting-To Be Deleted status for object Requisition

Hi All,
For the requisition created it is not possible to select the status 'To be Deleted'. Following error message is displayed "Cannot be deleted since open assignments exist". Please help.

Hi Pooja,
One way of doing this would be to delete the candidacy record which is still "In process" from HRP1001. You can do this using transaction SE16N. This would ensure that this truant record is no longer attached to the requisition object NB.
I am trying to understand the exact reason why the candidate attached to this record is not shown in the UI. Could it be possible that this candidate is deleted?
If you are still interested in deleting the NB directly from the tables, you can still use the SE16N transaction. But then you will have to make sure all the related infotypes also do not have this NB object.
For eg: When a requisition is created, records are created in the following infotypes:
1000
1001 - If a position/job is attached to the requisition
5125
5133 - for support teams
etc
Regards,
Sowmya

IW42 - Materials for Operation linked to Order, not Operation

In my current development, I'm struggling with linking materials to an operation, after IW42 has been completed.
In my test data, I coded for two situations, lookup of MSEG values starting with AFRU-WABLNR or WEBLNR (via AFWI-MBLNR). While that was viable in IW41, that doesn't work with IW42 because AFRU-WABLNR and WEBLNR are always initial.
My other course is to call BAPI_ALM_CONF_GETDETAIL, using the keys from AFRU, which is the more desirable approach, but not used in previous versions of this work. The BAPI call results in an empty goods movement and an empty goods movement errors table.
In researching SAP tables, I'm finding only a link between material document and service order in table AUFM...there seems to be no link that I can use to assign the material consumed to the service order operation that consumed the material.
This seems to be supported by Doc Flow displays in IW12 and IW32. The goods issues are showing sequentially for the order, followed by operations and the confirmations (hours) for each operation. I cannot find a link for material to operation in any of the documents found in document flow.
Question: Is anyone aware of :
1. An alternative way to link goods movements to operations in this situation; or
2. SAP settings that I should point out that would support assigning goods movement to a service order operation?

Resolved...functional specialist decided to use IW41, which allows retrieval of goods movements by operation.

Report for planned or prodcution order for production in Alternate plants

Hai gurus,
I have two plants - X and Y
Plant x have finished goods A and B to be produced and procured from plant - Y
plant Y have finished goods C and D to be produced and procured from plant - X
The production in alternate plant concept is used in plant X for Product A and B
The production in alternate plant concept is used in Plant Y for Product C and D.
Now my requirement is how to get the report for the Purchase order raised by the
plant X for the Finished product A and B , also how to know the planned order
and production order with reference to purchase order for Finished product A and B
under plant - Y
and VIce versa for the Finished product C and B in plant X and Y
Waiting for the positive reply.
Regards,
Sekar chand

There are a few reports that you can use to display STO requisitions and orders, by supplying plant, material, or MD04 like was mentioned.
The only thing that you don't have in a report is the link to the production order. In SAP in a MTS situation there's no fixed link (pegging) between the requirement (STO) and the supply (prod Ord).
You can view the pegging dynamically, for example in MD04.
Edited by: Mario Adler on Oct 27, 2011 12:13 PM

Shift Operation in Prodcution order.

How to record the shift operation in the Production order?

Hi,
Please try to simply your subject of posting. It is not necessary your subject and body of discussion should be same.
Yes possible to remove under SQL management studio provided you have authorization to access.
Thanks & Regards,
Nagarajan

FM or bapi for Regmnts assignment for operation in Service order

Hi all,
Can someone tell me if there is a Function module or Bape to get the Assigned requerments of a operation within a service order.
Kind Regards,
Richard

Hi Gautham,
I test the FM's but I do not get the Requirements in the operation details of the service order.
Kind regards,
Richard

Make Deletion Status for Operation in Prodcution Order

Similar Messages

Maybe you are looking for