Make Dropbox non accessible in Guest Acct

I see in my guest acct that the Dropbox (https://www.dropbox.com) folder is accessible. The other folders are blocked with the "no-entry" symbol. How do I make my Dropbox folder inaccessible to a guest?
Thanks!

Interesting - I have Dropbox installed and see the same behavior.
I would check in with Dropbox's support forums, since they'd have more information than this one. You can simply click on the folder, use cmd-i to open Get Info, then change the permission set to disallow others to read and write (set "everyone" to "no access"), but I don't know if that would affect any functionality of the Dropbox system.
Matt

Similar Messages

  • How do I remove my card details from payment and make it none again

    need to find out how to remove my bank card from payment info and make it none again

    On a Mac or PC, iTunes>Store>click your name in the toolbar and select 'Account Info' (in older iTunes click 'Account' in the links on the right). Presumably the iOS version is similar.
    Sign in. Click 'Edit' to the right of 'Payment information. You will see various credit card types listed, plus there should be a 'None' button. Click that then 'Done' at the bottom right.
    There have been reports that some people have been unable to carry this out. In that case probably only Support can help you. Go to https://getsupport.apple.com . Click 'See all products and services', then ' 'iTunes', and then 'iTunes Store', then 'Purchases, Billing & Redemption', then 'iTunes Store account billing'.

  • Make parameter non editable

    Hi All,
    I have a requirement to make the parameters field non editable as i am displaying default values for that. can any one please help me.
    Moderator message : Not enough re-search before posting. Thread locked.
    Edited by: Vinod Kumar on Aug 3, 2011 11:42 AM

    If you have to make any field non editable
    1) you have to disable it either by $FLEX$
    2) you have to make it non display
    So it will not going to help.
    I get your requirement, you want to display some default value and you do not want any user to change it.
    Fortunately there is solution to this as follows
    First,define one independent valueset with the value you want to display.
    Second,add this valueset for that parameter in concurrent program window and give default value as same value.
    Now run that program if user will try to change the value he will not be able to do so as there is only one value in independent valueset.
    I hope this solves your problem.

  • How to make fields Non Editable in Web ADI

    Hi All,
    Can you please let me know how we can make fields Non Editable in Web ADI?
    Thanks,
    Anil

    Hi,
    Are you trying to make required parameters readonly and does this variable have different values for each row. If not then I would suggest you use a wrapper for the API and get only parameters that you need from the excel sheet and the use the wrapper to send the other read only values.
    Thanks

  • [svn:osmf:] 14187: PARB changes: Make TimeUtil non-public, it doesn' t need to be part of the public API.

    Revision: 14187
    Revision: 14187
    Author:   [email protected]
    Date:     2010-02-16 09:37:39 -0800 (Tue, 16 Feb 2010)
    Log Message:
    PARB changes: Make TimeUtil non-public, it doesn't need to be part of the public API.
    Modified Paths:
        osmf/trunk/framework/OSMF/org/osmf/utils/ExternalProperty.as
        osmf/trunk/framework/OSMF/org/osmf/utils/TimeUtil.as

    Revision: 14187
    Revision: 14187
    Author:   [email protected]
    Date:     2010-02-16 09:37:39 -0800 (Tue, 16 Feb 2010)
    Log Message:
    PARB changes: Make TimeUtil non-public, it doesn't need to be part of the public API.
    Modified Paths:
        osmf/trunk/framework/OSMF/org/osmf/utils/ExternalProperty.as
        osmf/trunk/framework/OSMF/org/osmf/utils/TimeUtil.as

  • PL/SQL: How to make a function accessible to all users?

    How can I make a function accessible to all users?
    I have written a stored function called GET_NET_BALANCE.
    I can run it but my users cannot.
    I have tried the following, but my users still cannot
    run the function:
    GRANT EXECUTE ON GET_NET_BALANCE TO PUBLIC;
    Thanks, Eileen

    Hi,
    You can try creating a public synonym on the function so that it is accessible to all.
    To get greater response.. please post your question at
    PL/SQL
    Regards,
    Anupama

  • How do you make photos handicap accessible?

    How do you make photos handicap accessible?

    What you are describing is Tooltips. If you search this forum you'll find some info but I think all of them require editing of the files post publishing - adding code with an app like MassReplaceIt.
    Tooltips will show in some browsers if you insert the image tag into an iWeb snippet and add your text to the title like so....
    <img src="http://www.domain-name.com/imagefile.jpg" title="Tooltip Text Goes Here" />
    The problem is that the text is small and it wouldn't be much use to partially sighted people.
    With the thought anything may be possible, I did a rough test to see if something could be done in an HTML Snippet. This is very rough and needs some more work to tidy it up....
    http://96.0.63.10/iWeb-Test/Tooltip.html

  • Unable to make field non-mandatory using SM30/T588M

    Hello Gurus -
    My client would like the field LAND1 (country key) to be optional in infotype 21 (Family Members/Dependants).  Standard delivery appears to be that this field is mandatory if any of the address fields are populated.  We have tried to make this non-mandatory by setting it as Optional or Hiding it in T588M.  No matter how we set this field up, it still behaves as mandatory if any address field is populated.  We are certain we are at the correct Mod Pool/Variable Key combination as we have successfully changed other field requirements for this infotype.
    Does anyone have any input as to why we are encountering this problem and/or suggestions as to how to get around it?
    Thanks!
    Zaj

    Hi,
    Follow IMG path -> Personnel Management -> Personnel Administration -> Customizing User Interfaces-> Change Screen Modifications
    Try using the below screen for modification for IT 0021:
    Module Pool          MP002100
    Standard screen      2001
    Alternative screen   2001
    Feature         P0021
    In feature see that you maintain for which MOLGA Country Grouping and subtyes you want to use.
    I hope this will help you.
    Thanks,
    Padmaja.

  • Forest Root non-accessible\Child Domain still accessible. Can I recreate Forest Root and create Trust to current Child Domain?

    Hi,
    The 2 DCs for our Forest Root took a hit and are non-accessible, however the Child domain is still accessible.  Can I recreate the Forest Root from scratch and Trust/Link to current Child Domain?  So Im looking for my options to keep an accessible
    Child Domain, but recreate a new Forest Root cause the current one is inaccessible.
    Thanks for your help! SdeDot

    Hi, 
    Would you please tell us that what do you mean by they
    are non-accessible?
    Are you able to log onto any of the two DCs in the forest root domain? If yes, we can use dcdiag.exe to analyze the state of the dc in the forest root domain.
    If you have any system state backup of the DCs in the root domain, please restore the DC from backup.
    Best Regards,
    Erin

  • BIOS non accessible after installing W10 x86. Serious Issue.

    Potentially a serious issue.
    From a "cold boot" (following a previous shutdown command) the BIOS is non accessible. The actual clickable text of "Press F2 to enter set up" is missing. This means that no recovery of this PC exists such as booting from
    a Windows disc or other bootable media.
    Fortunately, providing you can boot into W10 and do a restart, then the BIOS options appear.
    This means that if Windows didn't boot into Windows your PC could well become a brick.

    I hope I can help you about. I've note a funny thing on my PC: I have installed Windows 10 on a spare HDD, clean install on new formatted disk, without any other HDD inside. Later I've "shut down", unplugged all cables and removed
    from PC the Windows 10's HDD. I have then rebooted my PC on my usual HDD, it was telling me when pushing the power-on button "stepping out from hibernation". I've seen ~ this before in 7 and 8 installations (only). Not a BIOS/PC/HDD problem for sure.
    Maybe you have already done that before, sorry if my message is giving too much details, but I wouldn't want that you break something down on the process :-)
    Try to follow those steps in this order:
    1 - Remove all the medias connected (USB keys, CD, external HDD etc.).
    2 - Plug off the power cord, remove the battery, remove the HDD (usually is easily accessible from one side or from down-side of your laptop), wait for 4-5 minutes, then put in the battery (or the power cord) and try to power on your laptop
    without any HDD, USB key or DVD.
    Normally you should see the BIOS as usual, it will announce you that you have no boot media, or that there is an error and default settings were loaded. If so, power off, disconnect power source (cord and battery), plug in the HDD and
    restart the computer. If it's again blocking your bios, return to step 2 for removing the HDD. You may consider to thoroughly cleaning your HDD (including the MBR, formatting will not clear everything out, rather delete the partitions, re-create them, re-format).
    If 1 and 2 don't change the state of your BIOS, the error it's not connected with your HDD/OS installed. It just happened that starts just after you installing a new OS.

  • HT2534 how to make the None option appear next to the Credit Card selections?

    In the support section, ther eis a How To for setting up an apple ID without a credit card, I know this has worked in the past because I did it once,
    The support page shows that there is an option to select "None" when pestered for credit card details, however in practice this option does not exist,
    Is there a way to make the None appear?

    I started on an iPad2, fresh out of the box, and created the account, it became apparent that those without a credit card may not have an account. I read a few of these threads and tried to "Review" the account using itunes and also the apple site. All roads point to BankCardTM
    Any ideas?
    Is it worth deleting the account and starting again? If so, how?
    GJ

  • Tutorial for make a non-generic type class from a generic type interface

    Hi there,
    How can I make a non-generic type class from a generic type interface?
    I appreciate if somebody let me know which site can help me.
    Regards
    Maurice

    I have a generic interface with this signature
    public interface IELO<K extends IMetadataKey>
    and I have implemented a class from it
    public class CmsELOImpl<K extends IMetadataKey> implements IELO<K>, Cloneable, Serializable
    then I have to pass class of an instance CmsELOImpl to AbstractJcrDAO class constructor whit below signature
    public abstract class AbstractJcrDAO<T> implements JcrDAO<T> {
    public AbstractJcrDAO( Class<T> entityClass, Session session, Jcrom jcrom ) {
              this(entityClass, session, jcrom, new String[0]);
    So I have made another class extended from AbstractJcrDAO. Below shows the code of this class and itd constructor
    public class ELODaoImpl extends AbstractJcrDAO<CmsELOImpl<IMetadataKey>> {
         public ELODaoImpl( Session session, Jcrom jcrom ) {
         super(CmsELOImpl.class , session , jcrom, MIXIN_TYPES);
    and as you see in its constructor I am calling the AbstractJcrDAO constructor by supper method
    then I got this error on the line of super method
    The constructor AbstractJcrDAO(class<CmsELOImpl>, session, Jcrom, String[]) is undefined.
    as I know java generics are implemented using type erasure. This generics are only
    in the java source file and not in the class files. The generics are only used by the compiler and
    they are erased from the class files. This is done to make generics compatible with (old) non generics java code.
    As a result the class object of AbstractJcrDAO<CmsELOImpl<IMetadataKey>>
    is AbstractJcrDAO.class. The <CmsELOImpl<IMetadataKey>> information is
    not available in the class file. As far as I understand it, I am looking a way
    to pass <CmsELOImpl<IMetadataKey>>, if it is possible at all.
    Maurice

  • Can I make a non-flash slide show using Fireworks, with JPEGs not GIFs?

    Can I make a non-flash slide show using Fireworks, with JPEGs not GIFs?

    Look to using jQuery instead of Flash.  There are a variety of redy-made solutions available, just search Google or visit the Dreamweaver forum and ask there.

  • Future Direction - How will Oracle make this product accessible?

    How will Oracle make this product accessible to the user community? Is this the type of offering where we'll be able to download the product (for free) from OTN or Metalink? The beta release shows a lot of promising functionality.
    Thanks.

    When this product goes production it will also be free. You will be able to download the production version from OTN.
    In the future it may be bundled with the database, though this has not yet been decided.
    Also, you will see this database functionality in future releases of JDeveloper, as they are both developed from the same JDeveloper IDE platform.
    Donal

  • While on Safari I was into my Facebook account. I checked off something, not sure what the **** it was, but it immediately shut down my Facebook. I'm able to access FB when on another computer or my guest acct. How do I get into my FB acct on Safari?

    While on Safari I was into my Facebook account. I checked off something, not sure what the **** it was, but it immediately shut down my Facebook. I'm able to access FB when on another computer or my guest acct. How do I get into my FB acct on Safari again? Each time I type in "facebook", it will not load.

    From your Safari menu bar click Safari > Preferences then select the Privacy tab.
    Click Details then type facebook in the search field then remove all facebook related items.
    Now empty the Safari cache. Press Command + Option + E on your keyboard.
    Quit and relaunch Safari. Try accessing your Facebook page.
    If that didn't help, click History from the Safari menu bar then click Clear History.
    Quit and relaunch Safari and try Facebook again.

Maybe you are looking for