Make field as display

hi all,
i want to make one field in display mode in mir7 how i can achieve this...plz help
regards,
umesh

hi
go to OB41
here double click on key 31
then click on field status
here try to change field status
regards
KI

Similar Messages

  • How to make 'Overall Limit' field as display only in ME22/ME22N

    Hi,
    I want to make the 'Overall Limit' field as display only in transation ME22/ME22N (only for Service Items).
    I can make the field display only for ALL Service Items by going to:
    SPRO u2013 IMG - Material Management - External Services Management - Define Screen Layout
    and making the 'Overall Limit' display only for PT1 (Blanket Items). But this also stops any entry into this field even for creation of Purchase Orders! When I try the same thing for ME22 (Change Purchase Order) it does not work.

    Hi
    You can make it greyed out like this:
    Go to materials management -> external service management -> define screen layout -> copy field selection key ME22 -> enter new key as ME22N -> choose category of field selection to 2 -> click on value limit -> make overall limit as display.
    Then for Tcode ME22N, this field will be greyed out.
    Thanks

  • ME22N - Make fields display only.

    Hi gurus,
    I have the following requirement I don`t know how to solve so well...
    We´ve created a new purchase order type and we need a little special behaviour for it.
    At creation (ME21N) all fields must be ready for input, in the same way that the other PO types.
    However, in modification (ME22N) we need some fields unavaible for input, just display.
    This fields are: Payment Terms (At header level) and Delivery Date (At Position level).
    I've trying some user-exits, but I havent found the way to implement this behaviour.
    Because of that, I`ve trying to let the fields available for input in ME22N and check values at save, showing a message in case of changes. Could anybody recommend me which user-exit use for this verifications?
    Once again, a lot of thanks!

    Hi Ole,
    Did you tried screen variants.Please check this lik want to make few fields as display only in ME21N Check this and tell if need more hlep in this.
    Regards,
    Madhu.

  • To make fields display in List view

    Hi,
    In PCUI, I want to make fields appear in list view in detail area1, these fields appear in form view but when I toggle it to list view it disappears, I have made nescessary settings for field group attributes but I am unable to bring those field visible in list view.
    Pls suggest
    Thanks in Advance
    Vishal

    Hi Tiest
    I have appended custom fields in the screen structure, and functionally it is working fine whenever I create any transaction and it also retrives the data for custom fields when I open any transaction. These fields become visible in form view but not in list view, I have also unchecked n. List in the customizing settings for those fields.
    Later I had generated the layout for that field group under my custom view.
    In the personalize window only the standared fields are visible custom fields does not appear.
    I am not able to understand properly what you are trying to say in this line:
    Second possibility, besides have created a field group continaing the actual fields have you also created a field group typoe 'screen structure' responsible for the actual lay out.
    Pls suggest where I am going wrong
    Vishal

  • Regarding Selection Screen field making display field  in ALV report

    Hi All,
               In ALV Report,  at runtime how can i make the field as Display Field in selection screen .
    Thks & Regds
    Shailesh

    hii,
    Go to se38 and give the below progra name execute.... check the source code it is very easy to understand.
    1.demo_dynpro_modify_simple
    2.demo_dynpro_modify_screen
    if tou are using grid,u can refer to foll link
    sequencing / choosing fields in report screen at runtime,
    Display the Columns in the grid at run time
    rgrds,
    Shweta

  • Master-detail: detail field not displayed after changed by master field

    I want to use the Depends on item with Clear/refresh value functionality in a master detail situation. Within the same group it is no problem to use the setter method of a field to change a second field and then displaying this new value. But in the detail group, I can not select items from the master group as a depends on item.
    In the setter of the master field, the value in a field for each row in the detail (table layout) is updated. The only problem is that this updated value is not displayed, the old value doesn't change. When saving the changes, the displayed value is committed to the database. When de updated field is not displayed at all, the correct value is saved, so I know the detail field is updated.
    How can I make sure the displayed value in the detail is displayed after changeing a master field? I already gave the detail field the correct partial trigger.

    Wouter,
    I guese you don;t see the changed value when you display the detail item because after the depends on item update changed the detail item, JSF procesing continues and the detail table changes are sent to the server which will override again the detail item attriibute, resetting it to the old, still displayed value.
    So, the trick is to get PPR working. Make sure the partialTYriggers property of the detail item is set to the value of the id property of the master item. If it still doesn't work, try setting the partial triggers property on the table, instead of the individual item.
    Steven Davelaar,
    JHeadstart team

  • How to make create, edit, display form in a page fragment ?

    Hello everyone,
    I have a problem when I want to make create, edit,display in a page.
    Ok let's say we have created two pages,
    In page A we have 3 buttons, CreateEmp, EditEmp and DisplayEmp button and one text field as a parameter field to edit and display (let say employeeId).
    In page B we have form employee to create new employee, edit employee and display and a button AddMoreEmp (to add more employee without back to page A)
    in this case if button EditEmp is pressed in page A, so button AddMoreEmp in page B will be enabled
    if button DisplayEmp in page A is pressed , so button AddMoreEmp in page B will be disabled.
    Thanks in advance,
    samantha

    I think what you are looking for is a comb field. It acts like a regular field but puts the vertical lines in between each character. You can turn the comb on in the object palette and indicate how many chars will appear in the field (so that it knows how many lines to draw).
    Paul

  • Industry sector field for display only.

    Dear All,
    Does anybody know the setting to make Industry sector for display only, so that the enduser cannot change industry sector while creating material.
    I know to hide industry sector from DEFAULTS menu, but i need to freeze that field for display only.
    Regards
    Rang

    Hello Ranganath,
    You can use transaction exit. for more information check this thread.
    Industry sector (MBRSH) field in display mode.
    Hope this helps.
    Regards
    Arif Mansuri

  • Created By field shows display name.

    Hi,
    I have a SharePoint list and the created By Field exports as Display name when I export to excel. I would like to auto -populate a field in the SharePoint list that will auto populate the Field with display name of the field when an item is created.
    How can I make this possible?
    Thanks,
    techie

    hi
    you need to use JavaScript code for the same.
    <script src="/my/Style%20Library/jquery-1.11.2.js"></script><script language="javascript" src="/my/Style%20Library/jquery.SPServices-0.6.2.js" type="text/javascript"></script><script language="javascript"
    type="text/javascript"> </script> ​​​​ 
    <script language="javascript" type="text/javascript">
    $(document).ready(function() {
    var userName= $().SPServices.SPGetCurrentUser();
    $(".sp-peoplepicker-initialHelpText.ms-helperText").text("");
    $(".sp-peoplepicker-topLevel").val(userName);
     $(".sp-peoplepicker-topLevel").text(userName);
    </script>
    http://www.enjoysharepoint.com/Articles/Details/auto-populate-current-logged-in-user-name-in-sharepoint-2010-20799.aspx
    http://www.enjoysharepoint.com/Articles/Details/auto-populate-current-logged-in-user-name-in-sharepoint-2010-20992.aspx
    or set column deafault value as [Me]
    http://sharepoint.stackexchange.com/questions/118932/sharepoint-2013-auto-populate-person-column-in-list-with-creator-name
    Rajendra Singh
    Walking on water and developing software from a specification are easy if both are frozen
    If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

  • OA Framework,how to make field Read-Only which is used inside Switch case

    Hi all,
    Using Personalization in OA Framework, when I am trying to make field read only, which is inside Swich statement ,then that field get automatically hidden.but my purpose is to make that field read-only not hide.
    My field name is Proposed Annual Increase Amount .
    The Personalization swtich case lookslike this :-
    Field Name Shown
    Switcher: Proposed Annual Increase Amount Yes
    case_name_HrPRateAnnTotInputSs
    Message Text Input: New Annual Amount Yes
    case_name_HrPRateAnnInputSs
    Message Text Input: Annual Pay Rate Yes
    case_name_HrPRateCurrAnnSalSs
    Message Styled Text: Pay Rate
    Regards,
    Mxj2930

    Can you be a bit clear on your requirement. If you have a switcher to display a field based on some condition, the other fields will not get displayed. I did not get as to what you mean by "my purpose is to make that field read-only not hide.".
    Are you talking about the case, when the "New Annual Amount" (or) "Annual Pay Rate" fields are displayed conditionally, you want them to be read-only and not editable. If this is the case, set the read-only property of these fields to true.

  • HOW TO MAKE FIELDS AS READ ONLY IN TABLE MAINTAINANCE

    HI ABAPers,
    HOW TO MAKE SOME FIELDS AS DISPLAY MODE.
    FOR SUPPOSE, THERE ARE 5 FIELDS in SM30.
    AMONG THEM 1 FIELD SHUD BE USED FOR EDITING AND THE OTHER 4 FIELDS SHUD ONLY BE USED FOR DISPLAY PURPOSE
    WHEN EVER I ENTER A VALUE IN THAT 1 PARTICULAR FIELD THEN THE DATA OF THE REMAINING 4 FIELDS SHUD BE DISPLAYED IN THE SAME SCREEN ITSELF.
    HOW CAN IT BE POSSIBLE...
    PLZ HELP.
    THNX IN ADV,
    SP.

    Hello SP,
    You can create a maintenance view for the table & here you can define the maintenance attribute for individual fields.
    For the fields you want to be READ-ONLY pass 'R' to those fields. (It is the 4th column from the left, the one to the immediate left of the Key column).
    Don't change the TMG function group directly. If you regenerate the TMG the changes would be overwritten !
    You can use the Event '01' to fulfill your requirement:
    *&      Form  f_event_01
    *       text
    FORM f_event_01.
      DATA: v_indx TYPE sy-index,
            v_land1 TYPE land1,
            v_name1 TYPE name1.
      FIELD-SYMBOLS: <vendor> TYPE lifnr,
                     <val> TYPE ANY.
      BREAK-POINT.
      "TOTAL contains all data which are read, changed and created in TMG
      LOOP AT total.
        IF <action> = neuer_eintrag " New Entry.
        OR <action> = aendern "Changed entry
        OR <action> = original. "Same as DB
          READ TABLE extract WITH KEY <vim_xtotal_key>.
          IF sy-subrc = 0.
            v_indx = sy-tabix.
          ELSE.
            CLEAR v_indx.
          ENDIF.
          ASSIGN COMPONENT 'LIFNR' OF STRUCTURE total TO <vendor>.
          CHECK sy-subrc = 0.
    *     select data from the LFA1 based on LIFNR
          SELECT SINGLE name1 land1 FROM lfa1
            INTO (v_name1,v_land1)
            WHERE lifnr = <vendor>.
          CHECK sy-subrc = 0.
    *     Populate the hidden fields NAME1 & LAND1
          ASSIGN COMPONENT 'NAME1' OF STRUCTURE total TO <val>.
          CHECK sy-subrc = 0.
          <val> = v_name1.
          ASSIGN COMPONENT 'LAND1' OF STRUCTURE total TO <val>.
          CHECK sy-subrc = 0.
          <val> = v_land1.
          MODIFY total.
          CHECK v_indx GT 0.
          extract = total. "Pass the changes in TOTAL to EXTRACT
          MODIFY extract INDEX v_indx.
        ENDIF.
      ENDLOOP.
      sy-subrc = 0.
    ENDFORM.                                                    "f_event_01
    BR,
    Suhas
    Edited by: Suhas Saha on Aug 16, 2010 11:58 AM

  • Custom module pool + Amount field decimals display same as standard screen display

    Hi All,
    Requirement: A custom module program screen field has to be designed which displays decimal values of amount fields same as amount fields in standard screen.
    Standard screen behavior: If the standard screen fields are observed, they refer to data elements WRBTR or AZSOL_F05A (transactions FB50/FB03/FB01). However, number of decimal places that are visible on screen are dependent on the currency that is provided.
    Both the data elements have 2 decimal places.
    For currency USD two decimal places are displayed - in TCURX - decimal places are two.
    For currency JPY or CLP - zero decimal places are displayed  - in TCURX - decimal places are zero.
    i.e., even though the screen field refers to data element or domain that has the characteristic to show 2 decimal places, based on currency, decimal places are adjusted.
    I would like to know how this is happening on standard screen fields.
    Solution Required for: How to make the custom screen amounts to display same number of decimal places as standard screen amount fields.
    P.S: Before posting the query here, research has been done in SDN and other places. It has been identified that quantity fields adjustments are discussed. However for amount field even though discussed earlier, did not reach a conclusion.
    I would like to get a solution for this one.
    Thanks in advance.
    Goutham.

    Thank you all for taking time to take a look at this query.
    This issue has been resolved.
    Resolution: If the standard transactions (FI transactions in specific) are observed, whenever there is a field that displays amount value, there will be a corresponding field (may not be beside the amount field, somewhere on the screen or in the same sequence of screens) where the currency key value would be entered.
    For instance, if you look at FB50 - there is field on top for the user to input currency key value (like USD or CLP or INR).
    When any amount field is declared - this currency key field is provided as the reference field in the screen attributes of the amount field.
    In short, in the custom module pool program, provide a field that holds currency key value and use this field as reference field for the amount fields.
    Do repond to this thread if the resolution is not clear.
    Thank you all once again.
    Goutham.

  • Making a field as display only in custom Infotype.

    Hi,
    I have to a requirement to make a field as display only in a custom infotype. This field should be greyed out while entering data via PA30 for any employee such that it wont allow to eneter data manually but it gets updated by a program. And also this field should have a default value , say, NO.
    Please help me as this is too urgent.
    Regards,
    Binay.

    Hi Binay
    Please go to Screen Painter SE51 for your custom infotype program MP9XXX00
    9XXX - infotype number.
    Go to Layout editor for your Single screen (Screen Number 2000)
    Double click on the field you want to make display only
    In the screen attributes DISPLAY OPTIONS for that field choose "Output Only"
    Activate Layout.
    If you want to code something to be populated for the field code in PAI or PBO modules in the Module pool program
    Its very easy.

  • How to make fields required in an updateble multi line form?

    How to make fields required in an updateble multi line form?

    You need to create a validation item that is triggered when the user clicks the submit button.
    Set the validation type to "Function Returning Error Text".
    Then add your validation into the "Validation Expression 1" field. Something like:
    BEGIN
    FOR I IN 1.. HTMLDB_APPLICATION.G_F02.COUNT LOOP
    IF HTMLDB_APPLICATION.G_F02(I) IS NULL THEN
    RETURN 'Please enter in a value for xxxxx on line ' || TO_CHAR(I,'0');
    END IF;
    END LOOP;
    RETURN NULL;
    END;
    As long as the function returns a string, an error is generated - as there is no single field where this error can be displayed, it will need to be displayed "On Error Page".
    If the return value is NULL, then the fields are valid and the submit process can continue.
    Andy

  • Commitment Item field in Display

    Hello,
    At the time of creation of PR for certain document type, How to make commitment item field in DISPLAY mode,which is avlialbe in Account assignment tab.
    Thanks,
    Vikas R

    Hi,
    This setting cannot be done for document type. This depends on the account assignment category only. Check t-code OME9 and click the details(Lens) for each AA category.
    Regards
    Aloysius

Maybe you are looking for