Make freeze frame without blur on motion

I want to make freeze frame on video but the problem is sign language signing make blur motion. I need to get sharp clear make freeze frame. Is there a way that can make sharp to make it freeze frame.
video clip is 1920 x 1080, 30 fps
Make freeze frame is for book so need to make motion clear? How?

Then there's not much you can do now.  It would have helped a little if you'd have used a high shutter speed on the video camera, but that's water under the bridge.
The only thing I can think of off the top of my head would be to find another frame where the hand wasn't moving then export both frames as s till image.  Open both in Photoshop and make a selection of the hand then copy that to the first still.
-DH

Similar Messages

  • Make Freeze Frame - shows RED

    Hi there
    I'm using FCPHD 5.1.2 on a Mac Book Pro 17" and when I create a Freeze Frame the clip shows up as red.
    I've checked my Effects Handling and its set to Final Cut Pro.
    Anyone have any ideas why I'm seeing red on Make Freeze Frame?
    I have the latest QT installed and have the Viewer set to RGB and not RGB+Alpha.
    I'm thinking this is a Intel problem, is anyone out there using a MBP or MP having the same issue as me?
    Many thanks
    Rory

    There is an extensive thread on your same question at the cow. Please have the courtesy of posting your solution here—and to all other FCP forums where you are crossposting—if you get one.
    bogiesan

  • Make Freeze Frame--Grabs 5 Seconds Later

    I'm not sure why this is happening, but every time I try to do a Make Freeze Frame of a particular frame in the timeline, it always pulls the image 5 seconds LATER in the timeline!! I've tried pulling the Freeze Frame from the Canvas window and the Viewer window with the same results.
    Here are the specs:
    Video is ProRes 422 (HQ) @ 25 fps. Timeline matches same specs with square pixels and no field dominance. The footage is exported from a Keynote presentation. However, when I sent the export I chose 30fps although the final footage came out at 25fps. This footage is listed in FCP @ 25fps and if I open it in QT it also is listed @ 25fps.
    Any thoughts?

    ProRes HQ is a heavy format. Make sure you are editing on a fast RAID and Mac. My guess would be the computer is struggling with the playback of ProRes HQ and by the time you hit your frame grad it takes a moment to process.
    Instead of trying to do frame grabs on the fly. I would stop near the section of video you want to make a freeze frame. Then go frame by frame for an exact frame grab. Might be a little slower but more accurate.
    In terms of your 25fps. Try re-exporting and confirm your settings are set to 30fps.

  • Make freeze frame in shake

    How can you make a freeze frame in Shake? Tried the timing tab, but no luck so far...

    So you know how the discussions are supposed to work, you should click on the or buttons over posts as appropriate...
    Patrick

  • Match frame from a freeze frame back to its motion clip?

    I can't get back to the motion clip I used to pull my freeze frame. It only goes back to the freeze frame master clip, even if I use match frame to source file. Any ideas?

    The freeze frame you pulled from a clip should have the clip name and timecode from where it was grabbed from.
    Go back to the source video clip at the matching timecode and you will find where you grabbed it from.

  • Make freeze frame with filters effects showing?

    I'm using the dvMatte Pro plug-ins to strip out the green screen and replace it with a different background.
    Even if I render the entire project, if I take a freeze frame (while the canvas and viewer show the subject against the newly added background), the freeze frame shows the green screen.
    How can I remedy this?

    Copy the clip from which you created the still frame. Right-click on the still frame in the Timeline and select Paste Attributes->Filters.
    Or, open the clip in the Viewer and drag the filters onto the still frame.
    -DH

  • Make freeze frame

    No menu showing  possibilities to create a still or a freeze frame appear whrn I use the control key. Why do I do wrong?

    in your Project's setting, switchON the Advanced Settings.

  • "Make Freeze Frame" but for audio..?

    If possible I'd like to end a sequence with a musical 'chord' that I would fade like a video 'Cross Disolve'/'Dip to Color Dissolve'. Does that make sense to anybody - apart from me? Any ideas as to how it might be done within FCE or perhaps with any other product? Thanks in advance.

    briantho wrote:
    ... At a particular point in a piece of music I want to 'freeze' the sound (let's say a particular chord) and, like a frozen frame, make that continue for a particular duration. ..
    that is not possible with the usual tools.
    different to video, which is 25/30 'stills' per second, audio is an analogue 'wave'.. usual sample-rate is 48.000 'stills' per second ..
    with some manual skills and excellent tools (e.g. Logic) you could 'extract' the last milliseconds of audio and 'loop' that infinitely .. no trivial task.
    believe it or not, but it is much easier to trick the eye than the ear

  • How to make print larger without blurring

    On my MacBook Pro I am having problems with my print (fonts) being very small (compared to my G4 which was fine). I fixed my desktop print so that my eyes are not too stressed, however, in all my programs, incoming mail, etc. the screens are very small (as in the AOL sign-in screen), and the print is really hard to read. Changing the font size in the Mac settings does not work (too blurry) and changing the screen size is even worse. Anyone else have this problem, or is my computer strange? Thanks....Have had it 6 weeks, and I have sent it back once because the speakers had to be replaced, and hope it isnt just a lemon. Or is there a free 3rd party program which can help this problem? Thanks..

    Several of our users have had similar complaints about the newest Powerbooks and MacBook Pros. The fact of the matter is, the screen is fairly high-resolution and not that large, thus each pixel is pretty small. This means that text is going to be small.
    We have suggested decreasing the resolution, like you did, but then it does make it a little blurry.
    You could turn on screen zooming by going to System Preferences, then Universal Access, and turning on Zooming.
    Do you use this computer away from a desk most of the time? Many users have been happy with 20" and 23" Apple Cinema Displays, which have larger pixels.

  • Render or export substitutes random video for series of freeze frames

    I've got a sequence that seems to act ok until I render or export to QT, at which point random motion video is substituted for the freeze frames I edited together to create a sort of stop motion animation. I tried trashing the 3x preferences I know, tried a new sequence, tried a new project, tried digitizing the material again (originally brought in as HDV, but I brought it in as regular old DV after I thought that might be the issue.)
    If I keep the series of motion fx simply nested, it acts ok. If I attempt to put a widescreen mask on it, it looks ok until I render. I tried a workaround of exporting the un-masked sequence out to QT to try and bring that back in and mask it, but the QT also fills in with the random motion video bits.
    Any ideas? I'd happily trash prefs, etc. again if someone's had a similar prob.

    FYI - I went through and recreated each freeze frame and it's working now. No idea why it was doing that, but some of the freeze frames were made from setting speed to 0%, others from Modify-Make Freeze Frame, so maybe that had something to do with it. It didn't happen on every freeze frame, but the problems didn't correspond to how the freeze frames were made either, so no clear answer. On second round, I did every single one with the Modify-Make Freeze Frame command, and now it's rendering ok. Fingers crossed.

  • Trouble with making a freeze frame?

    Hello All,
    I need some help with something I'm trying to do.  I have a short clip in my timeline that I have color corrected and added some filters to.  Then I move the playhead around until I find a still picture that I like and then I go to Modify>Make Freeze Frame and then I move the still from the viewer over to the section that hold all the files.  The trouble is that when I make the freeze frame FCE is giving the version before I did color correction or adding the filters.  How do I get to make a freeze frame that has been color corrected?  It's showing me the raw version before I've done anything to it.
    Thanks for your help.
    MIke

    When the freeze frame is created in FCE, it is only from the master clip (with no filters applied).  Simply drag the filters that you applied to the clip to the new freeze frame.  The filters will be applied with the settings you made.
    -DH

  • 16:9 Freeze frame

    how to 16:9 Freeze Frame?
    It have 16:9 DV and resulting image as a PSD with QT Export is 4:3
    sure I can cmd-T > transform it in photoshop in a 16:9 template but isnt there a more elegant way.

    The simplest method to make a freeze frame from the Timeline (or from another video source in the Viewer) is to choose the frame and chose the menu item "Modify > Make Freeze Frame" (shortcut "Shift N") which will load the current fame into the Viewer as a freeze frame the duration of which is set in "User Preferences" and at the aspect ratio of the source. In Final Cut Pro it will be displayed at the correct aspect ratio so no need to convert.
    If you are talking about exporting a freeze frame out of Final Cut Pro as a still then it is a different thing.
    The PAL frame is 720 pixels x 576 pixels and this is the same for both 4x3 and 16x9. But the 16x9 image has an anamorphic horizontal squeeze on in it. To see it un-squeezed on a still image simply change the horizontal size from 720 to 1024 pixels in Photoshop and Bob's your uncle.
    Not 100% sure for NTSC but I think it is 720 pixels expanded to 853 pixels? No doubt someone can correct me here if this is wrong.

  • Imovie11 splitting clips and freeze frame problems

    I am having a problem with imovie11 splitting cips and using the freeze frame function.  When I highlight the clip I want split, it splits a different clip either on the line below it or somewhere else in my project!  Also, my freeze frame function freezes the frame where my playhead is BUT doesn't split the clip...so what I'm left with is the entire clip- then the freeze frame - then the continuation after the freeze frame.  Is there a fix for this??

    Remove any in or out points you have on the timeline. Place the playhead at the frame on the timeline you want to freeze, and then select Modify > Make Freeze Frame, the freeze should appear instantly in the viewer. You can then click the Overwrite button, and the freeze should now be placed on the timeline in the correct place.
    Is this not happening?
    MtD

  • Freeze Frame Into Timeline?

    According to FCP's help, once I use Modify:Make Freeze Frame, I can drag it onto the Timeline or Vrowser.
    Neither works. It does either or both of two things when I try to drag it from the Viewer into the Timeline: It simply moves the image's position within the frame to way off-screen, and/or it crashes FCP. The crash seemed more likely to happen if I held the mouse down in the Timeline window for a while.
    I tried copy and paste too; that didn't seem to work either.
    Am I misinterpreting those instructions?

    David Harbsmeier wrote:
    Set the Viewer to Image mode only. It sounds like you have Image+Wireframe activated.
    -DH
    Good catch DH, I was way over-analyzing the post.
    bogiesan

  • Freeze Frame problem

    I have been trying to add a freeze frame at the end of a movie but the frame created is not at the end and it causes a jump. Is there an easier way to create a freeze frame rather than right clicking

    Al is right, you should check with the FCP forum.
    But the same happened to me with FCE HD 3.5.
    So I have 2 hints:
    - was the timeline selected (no clip selected in it) before Make Freeze Frame ?
    - as a workaround you can make a temporary sequence were to set the clip(s) with filters, drag this sequence into the main timeline, and apply Make Freeze Frame to that. This worked with me.
    Piero

Maybe you are looking for

  • Providing Access based on Client IP Address

    Current Scenario  - SAP Portal is accessible directly and via Citrix (VPN). Based on the URL alias - we have implemented Desktop Filtering. eg if the URL ends with / internet - You get restricted roles eg if the URL ends with / intranet - You get wid

  • How to Delete Albums, Etc in "Music'

    How can I delete music albums, genres, etc. in Music?  I was allowed to delete a playlist, but even the Apple manual and Dummies book don't tell me what to do.  I am not allowed to do any editing except rearranging the "More" list.  The above referen

  • How do I transfer a .mov file to my iPad from my Mac?

    How do I transfer a .mov file to my iPad from my Mac?

  • 20 mb excel file are not open in excel 2013

    Dear Microsoft, We are facing the  problen in excel 2014. When i open my  20 mb excel sheet ....it goes hang & showing the error..that Microsoft excel stop working .Please provide a setting solve this Issue.?

  • AUC Procedure

    Dear Experts,                         I have created one AUC Asset class with option of investment measure,Investement order.                         Investment order i have linked in the asset master of AUC.                         I have created PO