Make IT0105 accept same SAP userID for multiple PERNR

hi,
How do i make IT0105 accpet multiple SAP UserId for multiple PERNR for a single PERSON ID. this has to be done for a Concurrent Employee landscape.
All PERNRs of a single PERSON ID should have same userid in 0105. How do i copy uname for all PERNR.
ags.

Hi,
This is a standard control.
System checks the value MAIL SAPSY in table T77S0 and for that specific subtype of 0105 does not allow multiple entries.
Changing the value in T77S0 - as indicated in its help - would harm your system and is not recommended.
Regards,
Dilek

Similar Messages

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

Same apple id for multiple devices

I have been use the same apple id for multiple devices (both are iPhones running iOS 6 - one is a 4, the other a 4S.) I'd like to sync separate content for each device using the same instance of iTunes (iTunes V 10.7 installed on MacBook running OS X 10.6.8.) Can I assign the second device a separate apple id in odrer to differentiate the content? Thanks for your assistance!

No, a second Apple ID will not work. iTunes can already tell them apart.
When you connect the first iPhone to iTunes, check and uncheck the things you want and Sync.
Do the same with the second iPhone.

Can I use the same Apple ID for multiple devices

Can I use the same Apple ID for multiple devices?

Yes. Up to five devices can be authorized on a single computer using the same Apple ID. You can also use the same Apple ID on multiple devices is they are all going to use the same iTunes Library by the same user. But it's ill-advised if multiple users are involved who wish to keep their devices separate from the devices belonging to other users.
How to use multiple iPhone, iPad, or iPod devices with one computer
Using More than One iDevice on the Same Computer
This applies mainly to couples who are adding another device and do not want their email, messages, etc. being duplicated on both devices. To begin read: How to use multiple iPhone, iPad, or iPod devices with one computer. You need to establish a separate Apple ID and password for whomever will use the new iDevice. See Apple - My Apple ID and Frequently asked questions about Apple ID. The easiest way is to do this on the computer using iTunes: iTunes- How to set up an Apple ID within iTunes.
On the computer create a new user account for the person with the new iDevice. This will be the user account that person will always use. He/She will no longer use the other user account. This way that person will have a separate iTunes Library
Start by transferring the new device(s) to a new account along with all your data. Save any photo stream photos that you want to keep to your camera roll (unless they are already in the camera roll) by opening your Photos app, tap on Albums icon at the bottom. Now, tap on My Photo Stream album; tap Select; tap on the photos you want to select;, tap the share icon (box with upward facing arrow) in the lower left corner; then tap Save to Camera Roll.
If you are syncing notes with iCloud that you want to keep then you need to open each of your notes and email them to yourself. Later you can copy and paste the text into new notes created in your new account.
Tap on Settings > iCloud > Delete Account (only deletes it from this device, not from iCloud; the person keeping the current account will not be affected,) provide the password to turn off Find My Phone and choose Keep on My iDevice when prompted. Sign in with a different Apple ID to create your new account. Choose Merge to upload your data.
Once you are on separate accounts, you can each go to icloud.com and delete the other person's data from your account.
Note: The essence of the above was created by user, randers4. I
have made substantial changes to improve readability and syntax.

Can I use the same email address for multiple seats in Creative Cloud for Teams?

Can I use the same email address for multiple seats in Creative Cloud for Teams?

No. http://www.adobe.com/products/creativecloud/faq.html
Can I buy more than one membership to an individual offering of Creative Cloud?
No, Adobe has moved to identity-based licensing with a technology that will not support multiple same-product licenses, so you can buy only one membership per Adobe ID. If you need two Creative Cloud memberships, you will need to purchase each with a unique Adobe ID. You can also purchase a Creative Cloud for teams membership, which allows you to purchase and manage multiple seats under one account.

Time Capsule only works for one device at a time, how to make it capable to be used for multiple devices at times

Time Capsule only works for one device at a time, how to make it capable to be used for multiple devices at times.
Please help to set it up, thanks in advance

You need to give more info..
Firstly only works for what.. networking.. backup.. wireless. You need more nouns.. more adjectives... describe what you want and what fails.. then we can figure out why.
Most likely you have bridged it when it should be in router mode..
Most likely you are using Lion or ML which has the airport utility bridge the TC by default.
Change it to working as a router. That might help.
If you press reset button it will default back to router btw.
If you are on Lion.. use a real utility. http://support.apple.com/kb/DL1547

Can we use the same credit card for multiple customers???

One of my clients has a requirement where they need to use the same Credit Card number for multiple customers. I have looked into the possibility of using the 'Alternate Payer' functionality but besides that is there any other way SAP can be tweaked to accept the same credit card on multiple customer accounts?
Thanks in advance for any help or guidance you may provide.
SJ

I know SAP throws an error message which is why I was looking for a solution. I do have a work around. By pointing to an 'Alternate Payer' on the Payment Transactions tab on the customer master you can have a credit card on this alternate payer master record and use this payer on several other customers. All these customers will not have any credit card stored on their master records.
Thanks for your response though.

How to use Same Inspection plan for Multiple Plants?

Hello,
When I create a Process Order for material (M1), release and save it for a Plant A then I get the Inspection lot automatically.
Now I have another Plant B that we have created. We would like to use the same Inspection plan that has been created for Plant A and M1
So in the changed mode(QP02) of the Inspection plan for Plant A in the material assignment tab I added the Material M1 and the Plant B. I am assuming this means when I create the Process order for M1 in Plant B then it should use the same Inspection plan.
But when I create the Process Order for M1 for Plant B, release and save it then it does not created the Inspection lot automatically(though I can create Inspection lot manually)
Can you tell me if there is setting that will allow me to create the Inspection lot automatically on saving the Process order which should use the Inspection plan that I just assigned.
And also let me know if there is a better way to handle same Inspection Plan for same material but multiple Plants.
Thanks
SAP Fans...

Dear,
For your message my understanding is that you are not getting Inspection lot created in Plant"B". Inspection lot for a material would get created based on the Inspection Setup for the material master "QM View", so compare the QM for the material in both plants and correct it for Plant "B".
Probably I feel Inspection Setup is not complete for the material in Plant "B" - Generally when extending material by copying referance, in the QM view you need to click the Inspection Setup Button, for the data to be copied...otherwise it does not copy the Inspection setup from the referance plant.
Regards,
Prasobh

Logging same NC code for multiple components

Hi,
When logging NC codes in SAP ME 6.0 it is possible to log the same NC Code (defect) against many ref-des for
multiple components.
However when logging a secondary code (Action) for the previous primary NC Code all the choosen ref-des and components
don't get copied..
Is this how it is supposed to work or is there a setting somewhere so that all ref-des and components gets copied?
Best Regards,
Johan Nordebrink

Hi Johan,
The matter of your question is related to Ref Des List re-desinged for 6.0.
Overall situation looks like a design gap because:
- no explicit statement in the documentation describing the case of copying multiple Ref Des'es;
- the case of 1-to-1 relation between Component and Ref Des is mentioned in the context of auto-population of these feilds on tabbing out if one of the field is populated;
- the case of single Ref Des is widely referenced in the context of VTR that is a new feature in 6.0.
So, if you need this to be reviewed by Product Mgmt (maybe they agreed to identify this as a bug), as usually you should either ask your SAP ME Consulting representative or submit a support ticket (depending on whom you pefer to talk with ).
Regards,
Sergiy

Is it possible to use the same OSSO/OID for multiple R11 and R12 instances?

Hello guru's,
We have multiple R11and R12 instances that should be configured for Oracle SSO 10.1.4.3. For OID, we are still trying to decide between OID 10.1.4.3, or OID 11g. OAM is not an option because we also also need OSSO integration with Siteminder. We will also need to SSO-enable Discoverer an Forms.
I have successfully configured SSO for a single-instance EBS R12, but not for multiple instances, let alone include R11 and other components into the mix.
Do you have any special tips, guidance or lessons learned when SSO-enabling multiple instances into the same SSO/OID?
Thanks!
Maria

Interestingly, the article talks about using the same SSO/OID for EBS, JD Edwards, Peoplesoft multiple R11 instances, but did not mention 'multiple EBS versions'. Am I just being picky or there was a reason for it not being mentioned?In Steven Chan blog (in the same link), see the following:
Comprehensive Single Sign-On Solution+
If you have one or more E-Business Suite Release 11i instances and are tired of maintaining users separately for each environment, you can create a central OracleAS 10g environment and manage all 11i users in one place.
If you have a combination of PeopleSoft, JD Edwards, and the E-Business Suite in your organization, you can use OracleAS 10g to manage users for all three environments centrally.
If you have a combination of the E-Business Suite and custom applications based on Oracle databases or OracleAS 10g technology, you can use OracleAS 10g to manage users for all applications in a single place.
Thanks,
Hussein

Printing sap script for multiple customers

Hi,
I have a requiremnt to print the form for multiple customers. How should i use the sap script function modules? i.e. in which sequence?
for example customer A has 5 pages. customer B has 4 pages.
after printing 5 pages of the customer A, it should print 4 pages of the customer B.
regards,
CK

To print accroding to your requirment you should modify your driver program like this...
Sort <Internal table by KUNNR.
LOOP AT <internal table>
AT NEW KUNNR. "Customer..
**Call Function module OPEN_FORM
END AT.
AT END OF KUNNR.
***Call function CLOSE_FORM
ENDAT.
***Call all your Write_FORM
ENDLOOP.
Regards,
SaiRam

Is it possible to use same sap script for different comp code with difflogo

I have 3 company codes. I need to use same sap script to all but each company code has different logo. I dnt want to go for 3 different sap script. Is it possible to change in coding
like this
If comp code = '100'
print ' logo1'
If comp code = '200'
print ' logo2'
If comp code = '300'
print ' logo3'
in same sapscript.If yes how ?

Hi,
Yes you can do it.
In Sap Script use:-
/: If Comp code='100'
INCLUDE ZHEX-LOGO100 OBJECT TEXT ID ST LANGUAGE EN
/:Elseif comp code = '200'
INCLUDE ZHEX-LOGO200 OBJECT TEXT ID ST LANGUAGE EN
/:Else
INCLUDE ZHEX-LOGO300 OBJECT TEXT ID ST
LANGUAGE EN
/:Endif
I hope this helps,
Regards
Raju Chitale

HT201303 Can I use the same Visa card for multiple accounts?

Can I use the same Visa card for mine and also my partners apple account? Or is it one card can be linked to only one account?

You can use one card for a few account. I would believe it you attempted to use it on too many accounts (5+), it may cause some issues. But using the same card on two accounts is fine.

Same vendor code for multiple company codes

Can we have same vendor code for two different company codes ?

Yes u can use same code of vendor in different company code
only u will have to extend this vendor code to other company code in xk01
this is possible as number range is set on vendoe Account group
and same vendoe code and be used in 2 or many different co codes with different company code data
hope this helps
Edited by: Umakant Bhangale on Oct 11, 2010 5:35 PM

Same PIR updation for multiple vendors

Hi,
How to update the PIR for multiple vendors at a time whenever there is change in price.
Thanks,
Kiran Bodla

Hi,
Use the Info update tick in the P.O.
Raj

Make IT0105 accept same SAP userID for multiple PERNR

Similar Messages

Maybe you are looking for