Make magic mouse default to dialog box

Is there a way to force magic mouse to automatically place itself over the default hot button when I open a dialog box? I remember being able to do that in windows years ago.. Scirpt? Setting? Tweak? Anything... would sure save time and motion.
Thanks!

This is what I want:
https://www.macupdate.com/app/mac/14845/lazymouse
But it doesn't seem to be available anymore...

Similar Messages

How do i make the word save as dialog box stop popping up when trying to convert to pdf?

how do i make the word save as dialog box stop popping up when trying to convert to pdf?

Hi rus-tee,
That's interesting--what are you using to convert your file to PDF? Are you using Word? Or are you using the Adobe PDF Pack online service. Please describe your process for converting to PDF, and we'll get to the bottom of this!
Best,
Sara

Suppress default editor dialog box

Is there any way to suppress default editor dialog box that comes at 1st launch of Dreamweaver CS5. I need to automate some stuff and cant figure out how to handle it.
I cannot attach screenshot of this dialog box here, but it says that "Dreamweaver CS5 will set itself as Default editor for the following file types:" and gives option as jsp, asp, css etc.
Any help would be appreciated.

wsalopek wrote:
Suffice it to say for the purpose of this thread that when I did the ICS "upgrade" to my Droid 4, nothing but trouble followed until I did a hard reset and had to reinstall/customize everything...lots and lots of frustration and lost time, including a whole day when my phone was not usable at all (slow/rebooting on it's own/battery running hot/high cpu usage/battery dying in 90 minutes)...and I an NOT the only one.
Anyway, my wife has a Droid 4 as well, and she is being pestered by the dialog box that keeps asking her if she wants to do the upgrade. We do NOT want that "upgrade" installed on my wife's phone, but dealing with that dialog box is getting very tiresome.
Anyone know how to suppress that dialog box so it stops popping up?
Thanks...
There is no way to do this that meets the ToS on this board (as Verizon wants everyone to be at the same software level for a particular phone model). Search forums other than this one and the Motorola one for the information you need.

Keyboard shortcut to make a selection on a dialog box

How can I select an option in a pop-up dialog box without using the mouse. For example in iTunes, whenever I delete something, the box asks if I am sure I want to move it to the trash and it is defaulted to NO, but I want to select YES. I can't find a way to use the keyboard to choose the other selection.

Here's another one: http://docs.info.apple.com/article.html?artnum=75459 Mac OS X keyboard shortcuts
Thanks to DaddyPaycheck I used his link title as the keywords to find the above article. For the life of me I couldn't find that KB Article when I originally responded to your post.

Magic Mouse User Feedback/Suggestion Box

The Magic Mouse has great esthetic appeal, the touch to scroll is employed well, the swipes will take some getting used to as it is a natural movement (at least to me). The biggest shortfall I see is the inability to assign the functions, as well as the loss of the third and fourth buttons (scroll button click, and squeeze button)
The scroll button would be easy to employ as a virtual button with a two fingered click. Clearly the device can sense the difference between one and two fingers and the motion of clicking with two fingers seems incredibly intuitive to me.
One could also conceive of having two fingered scrolling mean something different than one fingered scrolling, think Application switching, Spaces, screen zoom.
The problem with the swipe motion is you have to stop the mouse from moving side to side as you hold it, making the motion somewhat unnatural. Interestingly though pinching/spreading on the mouse would work very well, since the opposite movement of each finger keeps the mouse still and does not require you to hold the sides. So pinch/expand zooming would be a natural one too.
Two finger Rotate seems hard since again the issue of the mouse moving comes up
Apple, throw in a two finger click assignable to expose, spaces, or user choice please. Pinch Zoom too please
Message was edited by: Michael Melkonian

In addition to all those I'd really love two finger slide up gesture to go up a folder level, or customizable to show topsites in Safari maybe. Slide down gesture to open a folder or file.
There are a lot of cool gestures. If Apple could create a 'watch me' method to create our one it would defeat the need for 3rd party software which could complicate the proper navigation functions. Even if most were disabled by default it gives advanced users a chance to take advantage of it's multitouch surface, which currently barely scratches the surface.

Make Custom (Run-Time Error Dialog Box)

I would like to Customize the Run-Time Error Dialog Box
bcos I want to use H/Wbuttons (need to Init the H/W) & not mouse to navigate thr the box
is the Dialog box available in Labview also

Hello aparab,
You won't be able to edit the dialog in LabVIEW for sure. Not sure if NI provide CVI / C++ source for that.
You can have your own dialog by handling the run-time error using SequenceFilePostStepRuntimeError callback. Look at this example:
http://zone.ni.com/reference/en-XX/help/370052M-01/tsexamples/infotopics/callbacks_sequencefileposts...
The example ships with TestStand as mentioned in the above link. You just have to use the information which will be in Parameters.Step container for error details and to customise your dialog.
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

When the iPad makes up about icloud, the dialog box remains locked on the screen of the block until it ends up?

What should I do?

Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Diable "open dialog box" on right mouse click so I can use l mouse to advance to next slide and r mouse click to "go back." How in PP 2010 for mac????

I do presentations in PP10. I am new to macair, and used to Windows. HOW DO I DISABLE THE "OPEN DIALOG BOX ON RIGHT CLICK"? I would like to use L mouse to advance slide, and R mouse to go back. The default is to use R mouse to open dialog box. I can disable this by unchecking the box in "advanced" on the PC. How do I do it with the Mac????
Thanks
hacmd

Hi Rod,
As originally stated in my opening post, the SWF is to be inserted into an Articulate '13 slide (what I called an aggregator originally - I tried not to bring them up since I don't want the chatter about "There's your problem - using Articulate"! ).
Recall that posting this published file to our LMS did not allow right-mouse click functionality as the flash player menu just gets in the way.
If I insert the captivate 6 files into Articulate as a Web Object (referencing the entire folder with html, htm and assets, and then posted to our LMS, and it DOES allow RM click operations in both IE and FF (although no sound on the Captivate slide in FF). But this is not what we want to do as this introduces 2 navigation controls (the Captivate one and the Articulate Player).
Why must anything be posted to a web server for this functionality to work?
I am able to go into the Captivate 6's published folder, and launch the Captivate demonstration by simply double clicking on the index.html file and this works great in both FF and IE after changing the security settings for flash.
Again - I can not believe I am the only one out there trying to use the right-mouse click feature to do a software simulation by embedding the Captivate SWF into an Articulate '13 project.

In Object Properties dialog box, modify "tab path"...

For FrameMaker versions up to and including 8 (and I suspect 9).
Select a graphic, then click in sequence
ESC g o to open the
Object Properties dialog box. By default the dialog box opens with the insertion point in the
Width text entry area.
Now press TAB four times: The insertion point moves sequentially to the
Height,
Top,
Left, and then
Color text entry areas.
I wish the last movement, to the
Color text entry area, was replaced with movement to the
Percent text entry area. This would enable me to use the keyboard to efficiently configure the size, position, and scaling of a graphic.
As it is, I virtually never need to select the graphic's
Color text entry area and the movement of the insertion point to that essentially useless tool drives me crazy: It makes me TAB all the way 'round the dialog box or grab the pointing device to get it to the
Percent text entry area...
Cheers,
Riley

Odd... What does your properties dialog look like? Can you post a screenshot of the dialog box? Also, what version of LabVIEW are you running?
Message Edited by smercurio_fc on 06-03-2008 04:56 PM

Magic Mouse, Trackpad feature in Autocad Bootcamp

Hi, i dunno which of Magic mouse or Magic trackpad i should buy.. Well, i wanna know which one is better use with AutoCAD for windows in bootcamp.. Is magic mouse gesture work in Windows like in OSX?? And Trackpad gesture works in Windows like in OSX?? Well, I have AutoCAD for mac also but sometime i to run program which doesn't have in OSX, like Robot, MS.Project while using Autocad.. Pls tell me how to use or feature of Magic mouse and Trackpad.. Thanks in advace..

hi.
this may work for ya.
http://microvault.blogspot.com/2010/06/how-to-make-magic-mouse-work-in-windows.h tml

Dialog box display won't update after screen blank or being moved

I have a modeless dialog box used for status display by a plugin I wrote for Acrobat. Everything works fine until the screen blanks or the user moves the dialog box on the screen, at which point no further updates to the dialog box are displayed. My plugin consumes 100% of CPU for long periods of time so the program can appear dead without this display being updated, but nothing I have tried seems to make any difference. The dialog box is generated with ADM and things I have tried include calling "Update" on the dialog box at regular intervals, the windows "Sleep" function to yield the CPU periodically, and a host of similar tactics.
I'm guessing all the code will get run together once I click submit, but here is how I create the diaglog box (it was working fine without the "WinAppRegisterModelessDialog", but I saw a reference to it elsewhere and tried it to see if it would help, not sure if it actually serves any useful purpose):
statWin = sADMDialog->Create(inPluginRef, DIALOG_ID, IDB_DIALOG1, kADMModalDialogStyle, NULL, NULL, 0);
WinAppRegisterModelessDialog((HWND)sADMDialog->GetWindowRef(statWin));
infoBox = sADMDialog->CreateItem(statWin, 5, kADMTextStaticType, &coords, NULL, NULL, 0);
// Status header
coords.top = coords.bottom + 10;
coords.bottom = coords.top + 12;
statHeader = sADMDialog->CreateItem(statWin, kADMUniqueItemID, kADMTextStaticType, &coords, NULL, NULL, 0);
// Status line
coords.top = coords.bottom + 10;
coords.bottom = coords.top + 12;
statLine = sADMDialog->CreateItem(statWin, kADMUniqueItemID, kADMTextStaticType, &coords, NULL, NULL, 0);
// Progress bar
coords.top = coords.bottom + 10;
coords.bottom = coords.top + 15;
progress = sADMDialog->CreateItem(statWin, kADMUniqueItemID, kADMProgressBarType, &coords, NULL, NULL, 0);
sADMItem->SetMinIntValue(progress, 0);
sADMItem->SetMaxIntValue(progress, totalPages);
// Set window size, and other attributes
sADMDialog->Size(statWin, coords.right + BORDER, coords.bottom + BORDER);
sADMDialog->SetText(statWin, PROD_NAME " - Progress");
// Set header for status line
sADMItem->SetText(statHeader, " Page # % Complete Estimated Time remaining");
// Initialize progress bar
sADMItem->Update(progress);
Updates are currently performed with the following code segment. The last two lines are my attempts to get the display to update once the screen blanks:
// show it
sADMItem->SetText(statLine, textBuf);
// Update progress bar
sADMItem->SetIntValue(progress, pagesCompleted);
// Force display update/refresh
sADMDialog->Update(statWin);
// Yield for display update (in case of screen blank or user changes)
Sleep((DWORD)100);
Everything works fine until the window is moved or screen blanking occurs, after that nothing seems to work, all updates to the box cease to be displayed. Any suggestions?

OK guys here's an update. First I went to BIOS and updated the initial display setting to "LCD panel only" from "Auto". At first I thought it helped, because when I worked at the laptop without the external screen attached, the internal LCD panel resumed normally from off (previously this didn't work).
But today while I was in the office with my external 19" LCD screen attached, and both of them went off after being idle for 10 minutes, the internal LCD panel didn't resume again. So I've tried the Fn + F5 key combination to switch between modes, and I switched from dualview back to single. The internal LCD panel blinked for a second and then turned off immediately, and from that moment on, I was without picture on both of them. SO I ended up hibernating and resuming again. :( An important note - as soon as the computer began hibernating, the LCD went on and I could see the whole progress of hibernation before it turned off.
Also another note - when I'm in dualview, I always have keep the internal LCD panel as the primary screen. So unfortunately, when it doesn't resume, I don't have access to the taskbar etc to try more things...
Any more thoughts?
Thanks again!
Rado

Magic Mouse not working in bootcamp 3.1 xp.....tried EVERYTHING!

Hopefully someone can help, have downloaded the new bootcamp drivers, magic mouse drivers...i have unpaired it in osx and tried it that way...it says it has connected to the mouse, but it still doesn't work!
Need some help PLEEEEAAAAASSSSSSEEEEEE!
Thanks

hi.
this may work for ya.
http://microvault.blogspot.com/2010/06/how-to-make-magic-mouse-work-in-windows.h tml

Using Message Built-In - Message dialog box appears twice

Hi all,
I'm using the message built-in to display messages in forms.
I use the message command twice to make it appear as a dialog box.(Using it once displays it in status bar)
Eg.
Message('Hello World');
Message('Hello World');
Sometimes, the dialog box appears twice instead of once.
Is there a way to solve this ?
Regards,
Sam

With an alert, you can write up to 200 characters in the alert box. With a message, you can write up to 255 characters, and if you want the message to pop up in an alert box, you can write a double message. I use:
Message('Hello World');
Message(' ',no_acknowledge);

Why are dialog boxes acting up in Indesign CC 64-bit?

Hi. I have Windows 7. When I use the regular Indesign, it works fine, but if I try sing the 64-bit version, I cannot use my mouse on the dialog boxes - they don't respond. The only way to navigate around them is with the Tab and arrow keys.
Any ideas?

I'm confused. My original Q was:
If having my Windows text set at 150% messes up ID, bec, I can't work its dialog boxes correctly with my mouse (only, to some extent, with my keyboard), then I have to reset my WIndows text setting to 125%.
But my vision is poor, so I find 1125% a bit small.
(BTW IDCC 2014 32-Bit Edition does not have the dialog box problem. But even when Windows text is 150%, ID 32-bit's text is tiny)
Do you have any suggestions?

Crystal 10 RCD and Windows (Advanced) Print Dialog Box

Years ago I wrote a Crystal Viewer program and Crystal Support showed me how to change the Viewer Print Dialog box so it would use the Advanced Print Dialog (I believe it used the Windows Print Dialog). Does anyone know how to set the RDC Viewer to use a Print Dialog that allows changing the printer and not just the default Print Dialog box that only shows settings for the default windows printer? I no longer have the source code for the program I wrote before and can't remember what to set and I have now written a new Viewer that I want to include the ability to change printers.

Ahhh, what you're looking for is descibed in note #[1212245|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] - How to use the Printer Setup dialog box.
Ludek

Make magic mouse default to dialog box

Similar Messages

Maybe you are looking for