Make MultiValue Parameter Dynamically Enable/ Disable

Hi,
I have two MultiValue parameters in SSRS report. Both the parameters are independant of each other. If I choose value from first parameter, Second parameter should be disabled dynamically. If I choose value from second parameter, First
parameter should be disabled dynamically.
Can this be achieved in SSRS ?
Is there a workaround to achieve the above scenario ?
Regards
G. R. Venkatesh

Using nulls is one way. Another way is to set a default value say NotApplicable. Just set below expression for default value
IIF(Len(Parameters!SecondParameter.Value) > 0,"NotApplicable",Nothing)
Similarly for the other parameter
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
Hi Visakh,
I am new to SSRS.
Could you please share a workaround sample for my scenario
I tried to implement the expression for Multivalue parameter1 default value, The parameter1 has below expression
=IIF(Len(Parameters!SecondParameter.Value) > 0,"NotApplicable",Nothing)
and Parameter2 has below expression
=IIF(Len(Parameters!FirstParameter.Value) > 0,"NotApplicable",Nothing)
I get a error saying "The expression references the parameter 'parameter2' which doesn not exist in the parameters collection. Letters in the names of parameters must use correct case"

Similar Messages

[ADF UIX] Dynamically enabling/disabling fields

Hi
Another newbie question.
Does anybody have any pointers on how to dynamically set the read-only property of a messageInputText field dependent on the value of another field in an ADF UIX input-only-form?
To set the scene: I have a VO with the following columns:
1) id
2) subtype (values L or N)
3) field1 (only editable when subtype = L)
4) field2 (only editable when subtype = N)
When the user creates a new record, the subtype will default to L. I need field1 to be enabled and field2 to be disabled. If the user changes the subtype field to N, field1 must be disabled and field2 enabled.
Is this possible? Or is this best left to the spanking new ADF Faces?
(My environment: JDeveloper 9.0.5.2 build 1618)
Thanks!
CM.

Some research reveals one method to do this: EL (Expression Language).
As an example I had the following messageLovInput that I wanted to dynamically make read-only (similar to enabling/disabling) dependent on a value in another field 'InputRequiredInd'. As such the following tag was implemented:
<messageLovInput
model="${bindings.DsvId}"
id="${bindings.DsvId.path}"
destination="dataSetValidationRulesLevelOneLov.uix"
partialRenderMode="multiple"
partialTargets="_uixState"
readOnly="${!empty bindings.InputRequiredInd.inputValue ? false : true}"/>
You'll note in the readOnly element an "EL" expression. Essentially this says if the InputRequiredInd is not empty then return false otherwise true.
A useful reference:
http://www-106.ibm.com/developerworks/java/library/j-jstl0211.html
I hope this is helpful to someone!
Cheers,
CM.

Dynamically enabling/disabling results using RunState.Execution

We run with our station options set to have results disabled for all sequences. BUT, at one point in a sequence run from the tools menu (i.e., not using the process model), we want to temporarily turn on results recording, run a step or two to record results, and then turn result recording back off.
I am calling an ActiveX/Com step to enable results using RunState.Execution DisableResults(false). I then run various steps that should be recording results, but my Locals.ResultList remains empty. Have also tried to calling RunState.Execution AddExtraResult, but no luck.
My true goal is to be able to call the TestReport sequence of the SequentialModel.seq file which takes as its first parameter the "results container". I want to be able to send a very select, small set of results that are generated from my sequence run from the tools menu. I tried various ways of creating a "dummy" result list, but was unsuccessful doing that as well.
Any ideas?

Barry,
For RunState.Execution DisableResults to work, The Engine and | or Sequence must also be False depending on what setting you have set to disable.
So in your case you need to set IEngine.DisableResults(False). You dont really need to call RunState.Execution DisableResults(False), use this if you what to switch on | off recording of selective steps rather than all steps in a Sequence.
Use Sequence.DisableResults to disable all steps in a Sequence.
Hope this helps
Regards
Ray Farmer
Regards
Ray Farmer

How to make the custom field enable/disable in ME21n/ME22n/ME23n trans

Hi Experts,
I need help.
I have created one custom field in the transaction ME21n/ME22n/ME23n under customer data 2 tab. But my problem is the field is always in enable (means editable only) even in Display mode. How to make the field is non editable in display mode and editable in change mode.
I have tried by putting some logic to make that field to change alternatively according to change/display button. And it is working fine but if we click any othe button , this field is becoming editable even in display mode.
How to make this field to behave as standard fields?
Please reply me <removed by moderator>
Thank you in advance.
Best Regards,
Divakar.
Edited by: Thomas Zloch on Mar 2, 2012

If you have BADI implimented for custom tabs then you can do this in method ME_PROCESS_PO_CUST~FIELDSELECTION_ITEM
lv_changeable = im_header->is_changeable( ).
LOOP AT ch_fieldselection ASSIGNING <fs>
    IF lv_changeable IS INITIAL.
      <fs>-fieldstatus = '*'. " Display
    ELSE.
      <fs>-fieldstatus = '+'. " Change
    ENDIF.
endloop.

ADF Faces: Dynamically enabling / disabling client validation

Hi Frank,
Im using JDeveloper 11.1.1.2.0 version. I want to disable the client side validation for some condition. I have read related information from Frank blog .
But In that frank used adf-faces-config.xml file for the following configuration.
<adf-faces-config xmlns="http://xmlns.oracle.com/adf/view/faces/config">
<skin-family>oracle</skin-family>
<client-validation-disabled>true</client-validation-disabled>
</adf-faces-config>
But in my application, I could not find adf-faces-config.xml file. I dont know where to configure please provide me the information.
Regards,
Felix

Hi,
in JDeveloper 11g this no longer is an option. To disable client validation you set immediate=true on the UI component, which youalso can do dynamically. Howerver, ensure you refresh the component after changing the immediate property state.
Frank

Dynamically enabling/disabling opc-binding to shared variables?

Hi.
I've got some shared variables binded to my OPC server, but sometimes some variables need to "ignore" the OPC updates and and be simulated, and in some cases, all of the variables.
So, I've got an application to dynamically change the shared variables properties: Network.UseBinding and Network.URL to "connect to" or "disconnect from" the OPC server, but is there a way to "unbind" the whole library from the OPC quickly and restore it back when need it?
I tried creating and deleting the IO server programatically but the variables go "bad"...
Is this is a good practice or should I change the method?

Hi Keptat, you can bind them directly to the OPC sever but you need to add
psp: at the begining.
For example
   psp:\\localhost\IOServer\ModbusSlave1.000001
   psp:\\aebenjamin\IOServer\OPC1.Channel_0_User_Defined.Ramp.
   psp:\\ host \ library\IOservername.register
An easy way to find the complete address y bind a Variable with psp
binding to the OPC server and you will get the path.
In the example code it gets the psp address from a Library, but won't get
you the directions of the registers inside the IOserver, so you need this list
manually.
Another option is create 2 libraries one with the variables binded to the IO
Server and the other binded to the simulated info, in this case you just have
to point to the library, and get the address of all variables.
Also you have to make sure the OPC server is deploy and you can see it
in the Distributed System Manager
Best Regards
Benjamin C
Senior Systems Engineer // CLA // CLED // CTD

Dynamic enable/disable

Hi
in my application i have tabular form with report 5 columns
p1,p2,p3,p4,p5
and a button "add row" when I click on add row button
all 5 columns should be enabled but once i submit and add the row in the table
p1,p2 and p3 should be disabled or locked not updatable,.
i should able to update only p4 and p5 columns
i checked the forum but could not get any matching my requirement.
can any one please help me how to do this.
thanks very much in advance.

Hi
in my application i have tabular form with report 5 columns
p1,p2,p3,p4,p5
and a button "add row" when I click on add row button
all 5 columns should be enabled but once i submit and add the row in the table
p1,p2 and p3 should be disabled or locked not updatable,.
i should able to update only p4 and p5 columns
i checked the forum but could not get any matching my requirement.
can any one please help me how to do this.
thanks very much in advance.

Based from my selection-screen, how can I make the parameter dynamic?

Hi experts,
Based from my code below and logic, I have to modify the loop at screen without removing the original IF condition in such a way that the parameter p_code will only be available for input if the radiobutton pr_edit is clicked by the user.
Again, thank you guys and have a great day!
SELECTION-SCREEN BEGIN OF BLOCK box1 WITH FRAME TITLE text-001.
PARAMETERS: pr_upld RADIOBUTTON GROUP grp MODIF ID id3.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 03(30) text-a11 FOR FIELD p_flnme MODIF ID id3.
PARAMETERS: p_flnme LIKE rlgrap-filename DEFAULT 'C:\' MODIF ID id3.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(32) text-002 FOR FIELD p_dcode MODIF ID id1.
PARAMETERS: p_dcode LIKE vbak-kunnr MODIF ID id1,
            p_name1 LIKE kna1-name1 MODIF ID id1.
SELECTION-SCREEN END OF LINE.
PARAMETERS: pr_list RADIOBUTTON GROUP grp MODIF ID id4,
            pr_add RADIOBUTTON GROUP grp MODIF ID id2,
            pr_edit RADIOBUTTON GROUP grp MODIF ID id5.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 03(30) text-a12 FOR FIELD p_code MODIF ID id2.
*PARAMETERS: p_kunnr LIKE zts0001-kunnr.
PARAMETERS: p_code LIKE zts0001-cdseq MODIF ID id6.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK box1.
IF v_compflag EQ space.
    LOOP AT SCREEN.
      IF screen-group1      = 'ID1'.
        screen-input        = '0'.
        screen-output       = '1'.
        MODIFY SCREEN.
      ELSEIF screen-group1 = 'ID2'.
        screen-active       = '1'.
        MODIFY SCREEN.
      ELSEIF screen-group1 = 'ID3'.
        screen-active       = '0'.
        MODIFY SCREEN.
      ELSEIF screen-group1 = 'ID4'.
        screen-active       = '1'.
        MODIFY SCREEN.
      ELSEIF screen-group1 = 'ID5'.
        screen-active       = '1'.
        MODIFY SCREEN.
     ELSEIF screen-group1 = 'ID6'.
        screen-active       = '1'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSEIF v_compflag NE space.
    LOOP AT SCREEN.
      IF screen-group1      = 'ID1'.
        screen-active       = '0'.
        MODIFY SCREEN.
      ELSEIF screen-group1 = 'ID2'.
        screen-active       = '0'.
        MODIFY SCREEN.
      ELSEIF screen-group1 = 'ID3'.
        screen-active       = '1'.
        MODIFY SCREEN.
      ELSEIF screen-group1 = 'ID4'.
        screen-active       = '1'.
        MODIFY SCREEN.
      ELSEIF screen-group1 = 'ID5'.
        screen-active       = '0'.
        MODIFY SCREEN.
      ELSEIF screen-group1 = 'ID6'.
        screen-active       = '0'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.

Write the below code in selection Screen Output Event
AT SELECTION-SCREEN OUTPUT.
IF pr_edit EQ 'X'.
    LOOP AT SCREEN.
      IF ( screen-group1 = 'ID6' ).
        screen-input = 0.
        screen-invisible = 1.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
Enjoy Coding.
Thomas.

How to make required parameter dynamically?

Hello,
I have 3 parameters for a report:
1st parameter (mandatory): Run Report has 2 values: By Department, By Country
2nd parameter: Department
3rd parameter: Country
If user selects By Department, then I want Deparment becomes mandatory with asterisk next to it.
If user selects By Country, then I want Country becomes mandatory with asterisk next to it.
How can this be achieved?
thanks
Lei

Why not have only one parameter as a dropdown list box with the choice of running by department or by country. The user will only be able to pick one or the other.
Assuming you call the parameter pSORTBY you can then have your SQL look like this.
ORDER BY :pSORTBY

Dynamically enable a field based on a selected table row

Hi everyone.
I'm getting really confused right now, please show me the right way. My approach may be, and probably is, wrong since I am self learning this and all I have is an ASP.NET background.
I have a page with a table in it. I've created a DataControl for a collection I've made and mapped it to the table. I added a column that shows an "edit" button. On it's click, I open a popup that shows the selected row's data. Naviguation controls are also present on the popup.
This is working fine.
My problem comes in the popup. Each row has multiples fields. These fields, shown on the popup, need to dynamically be enable/disable. To toggle those field, the only way I can see right now is to have a function that takes into parameter the rowId and the fieldName. Based on those two fields, I can get the necessary information to know if I need to enable or disable the control.
What I was aiming for, but then again I totally failed, was to have that function called on the "enabled" EL Expression, returning a Boolean.
Now that this has been said, can someone guide my on how to dynamically enable/disable each field based on the selected row.
Thanks !

Above +
why don't you create a bean method that returns a Boolean ans through EL Expression Builder select the method to this property.
btw .. on which components are you setting this?
Also,
If there is business logic that prohibits to update this object unless that is met.. you can also do it as..
In EOImpl .. override isAttributeUpdateable(int i) method eg:
@Override
public boolean isAttributeUpdateable(int i) {
if(i == this.ENAME && "KING".equalsIgnoreCase(this.getEname())){
return true;
}else
return super.isAttributeUpdateable(i);
and then in UI for the component say
ReadOnly = #{bindings.Ename.updateable}
Or, In UI
disable = #{ bindings.Ename.attributeValue == 'KING' & bindings.Mrg.attributeValue == null ? true : false}
adf does provides many ways to do it ..
Cheers, Amit

Dynamic enabling of input fields via radio btn in report selection screen?

Hi there!
I was wondering whether one can dynamically enable/disable input fields on a selection screen of a report-program.
Or is this only possible for selection screens in dynpro-programs?
If possible for reports - could you give an example?
Thanx a lot.
Andreas

Hi,
yes..You can dynamically disable and enable inputs fields in the selection screen..
Check this ex..If you press the first radio button..The second input will be disabled...And vice versa..
PARAMETERS: p_r1 RADIOBUTTON GROUP g1 USER-COMMAND usr DEFAULT 'X',
p_r2 RADIOBUTTON GROUP g1.
PARAMETERS: p_input1 TYPE matnr MODIF ID m1,
p_input2 TYPE matnr MODIF ID m2.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF p_r1 = 'X'.
IF screen-group1 = 'M2'.
screen-input = '0'.
ENDIF.
ELSE.
IF screen-group1 = 'M1'.
screen-input = '0'.
ENDIF.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
Thanks,
Naren

Using XMLLIST - Enable/Disable Menu Items

I am using XMLList for creating menu items.
I want to enable / disable menu items based on the permissions to the user.
Below is the code snippet:
<fx:XMLList id="newData">
                              <menuitem id="item1" label="{resourceManager.getString('taskmgmt', 'taskmgmt.label.newProject')}" />
                              <menuitem id="item2" label="{resourceManager.getString('taskmgmt', 'taskmgmt.label.projectFromTemplate')}" enabled="false"/>
                    </fx:XMLList>
private function ItemClickHandler(event:MenuEvent):void
     if(PermissionManager.isAddPermitted("WTM_PROJECT_PLANNING")){
                                                       ProjectAssignmentModel.projectAssignmentFlag=false;
                                                       if(event.item.@label == resourceManager.getString('taskmgmt', 'taskmgmt.label.newProject')){
                                                                 clearModel();
                                                                 dispatchEvent(new SwitchViewEvent(SwitchViewEvent.SWITCH_VIEW_EVENT,false));
protected function newMenuButton_clickHandler(event:MouseEvent):void
                                        if(! PermissionManager.isAddPermitted("WTM_PROJECT_PLANNING")){
                                                  newData.item1.enabled = false;
                                        else
                                                  menuList.dataProvider = newData;
                                                  menuList.show(event.stageX + 5 , event.stageY + 5);
                                                  mode = CREATE;
Based on the permission, I want to dynamically enable / disable the "New Project" button.
Can someone provide information how to achieve this ?
Further update on this, it is giving the following error while running of the application:
"TypeError: Error #1089: assignment to list with more than one item is not supported"

Resolved by using the correct Data Provider and iterating through the list

Need help with OA Framework. Enable/Disable LOV dynamically

Hello,
I am new to OA Framework. My requirement is as follows;
The page should have a field with parameter org code (LOV). When the user selects an org and click GO button, the page should display all the inactive items (which have no Sales order or work order for last 2 years). In the table region, user selects single record or multiple records by a check box. The selected records should be processed after clicking a submit button in the table region. The process is, calling an API to change the status of the item to Inactive or some other status. The status should be determined by the user by selecting a LOV within the table region. I could create LOV based field for org code and could display the data on the page. I have been trying to display the LOV for item status , I have created a LOV under table region under table components > table actions. I could open the LOV and select a value, but the value is not defaulting to the field on the page. Somebody please help me with a suggestion or if you have the code for a similar kind of requirement please share with me.
Also, need some suggestion on how to enable and disable LOV dynamically. I want to display the 2 LOV's in different regions. I want to enable the LOV for Item Status only after the org code is selected and the page populated after the user clicks GO button.
Thanks in Advance…..

Hi,
I could open the LOV and select a value, but the value is not defaulting to the field on the page.pls check the LOV mapping ,this might be wrong.
to enable/Disable LOV dynamically ,u need to use PPR,please check the lab solution exercise create employee chapter to learn to implement PPR functionality.
Thanks
Pratap

Enable/disable report parameter control at runtime in SSRS

Hi,
I am using SSRS 2012. I want to enable/disable or hide/show parameters based on another parameter selection.
I have a 3 parameter, Parameter 1 says which parameter need to show either Parameter2 or parameter3 in the parameter panel. i don't find any expression to show/hide option.
Appreciate your help.
Paramesh G

However if you want parameters to enable disable then that functionality can be obtained by using cascading parameters
ie make parameters 2 and 3 dependent on 1
So for that created two datasets which will provide values for parameters 2 and 3
Check allow null values for both the parameters
Set default value as NULL for both parameters
then for dataset use queries like
SELECT ...
FROM ..
WHERE @Parameter1 = 'Parameter2'
SELECT ...
FROM ..
WHERE @Parameter1 = 'Parameter3'
This will make sure parameter2 or 3 gets enabled with required values based on what you choose for parametr1
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

How to enable / disable SSRS Parameter

Hi
I want to enable a parameter called "start date" (type is date) when another (value from dropdown) parameter is selected
Say for an example, i have below 3 parameters
1. drop down which 2 values called "vtextbox","vdate"
2. start (data type is date)
3. finish (data type is date)
when i select "vdate"value from the dropdown 2nd and 3rd parameters has to be enable
similarly when i select "vtextbox" value from the dropdown 2nd and 3rd parameter has to disable
I have searched many forums every one says this is not possible in report manager interface
But this is possible in custom code
please make a note all three parameters are independant
It would be great if any one provide the custom code for same
Regards
Santosh

Hi itsmesantosh1982,
According to your description, you want to use a parameter to control enable/disable other two parameters. Right?
In Reporting Services, when we create a parameter, this parameter has been enabled. The only way you want to disable the parameter is deleting it. In this scenario, disable the two parameter is same as selecting all values in these two parameters. So
we can just modify the default values in 2nd and 3rd parameter instead of using cascading parameter. We can create a dataset, put in the query below:
IF @Param='vtextbox'
select distinct startdate from [table]
else
select '[value]'
The [value] can be any value which is not existing in [table]. So when you select 'vtextbox', the default value will be all values in the table. If you select 'vdate', it will need you to select value automatically because the return value is not existing
in the table. This can be an effective workaround for your requirement.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Make MultiValue Parameter Dynamically Enable/ Disable

Similar Messages

Maybe you are looking for