Make music to fit

Hello, I have a music peace for my automatically running and looping presentation – but music is longer than the presentation and runs on, when nothing more is to be seen.
Now:
How can I shorten the music track (an where is it) in Keynote?
Or:
How can I find out the duration of the presentation to make music the same length?
Thanks for help!

Input the music in to Garage Band and shorten it to fit the length of the presentation. This will also allow you to pick a start point for the music. In other words, maybe you don't want the very beginning of the song because it starts off too quiet. You'll be able to start the music at the exact point where you want it. You'll also be able to control the volume. If you want it to start off soft, pick up volume in the middle, and end soft, you can do that, too.
I hope this helps!

Similar Messages

  • Music to Fit in Keynote?

    I am creating a slideshow and am using KN. I chose KN instead of an iPhoto slideshow as I needed to put words along w/ the photo's. I also have it set to music. Two questions: is this really the best way for me to do this - my MBPro will be hooked up to a projector where the project will be projected onto a screen.
    Second, I created the project on my iMac Intel and need to get it into the MBPro...it is 21MB. Best way to do this?
    Third, is there a way to make the slideshow fit to the duration of the music?
    Thanks in advance! Karen

    Karen Woods wrote:
    I am creating a slideshow and am using KN. I chose KN instead of an iPhoto slideshow as I needed to put words along w/ the photo's. I also have it set to music. Two questions: is this really the best way for me to do this - my MBPro will be hooked up to a projector where the project will be projected onto a screen.
    Keynote is a better option that iPhoto for this, yes.
    Second, I created the project on my iMac Intel and need to get it into the MBPro...it is 21MB. Best way to do this?
    A thumb drive, or burn a CD if you're not going to ever need to make changes to it.
    Third, is there a way to make the slideshow fit to the duration of the music?
    I haven't done this, so that part I can't answer.

  • How to make my website fit to all resolution?

    Hi all, I'm a beginner for using dreamweaver.  I've been looking for this question but I think it doesn't solve my problem. I want to make my website fit to all screen resolution. At first, I preview it at mozilla  and Internet explorer and its ok. But my friend say that she open it at her computer , Ipad it become a mess. I try to open it at public computer too and it's really such a mess.
    I used dreamweaver cs6
    And now my problem is:
    How to set it to fit for all screen resolution?
    what is the css code to make it fit to all screen resolution?
    How to set normal  width and height for website?
    this is how my css work:
    @charset "utf-8";
    .mainbody {
        background-color: #CCC;
        width: 980px;
        margin-right: auto;
        margin-left: auto;
    .mainbody .header {
        height: auto;
        width: 980px;
        padding-top: 15px;
        padding-bottom: 10px;
    .mainbody .menubar {
        width: 980px;
        height:auto;
        padding-top: 10px;
        padding-right: 0px;
        padding-bottom: 10px;
        padding-left: 0px;
    .mainbody .slider {
        width: 972px;
        height: auto;
        padding-top: 15px;
        padding-bottom: 15px;
        border: medium dotted #60F;
        margin-top: 25px;
        margin-bottom: 15px;
    Please let me know is there's any mistake i've made. 
    By the way , sorry for my bad English ^_^

    Thank you for your reply ^_^
    this is my website : www.favoritepumps.com
    It's very very very simple right >.<
    but in this website I use the dreamweaver template . few days ago I make my own use div tags and i'ts been mess and I changed it back.
    and now I just want to know how to set it fit to all screen resolution and how about the width I make?
    I got some information that the width shouldn't be more than 980 px is it true?
    how should I write then?
    I make it like this at the source code:
    <div class="mainbody">
        <div class="header"><img src="images/favoritepump.png" width="500" height="80" alt="favoritepumps" /></div><!-- end .header -->
        <div class="menubar">
          <ul id="MenuBar1" class="MenuBarHorizontal">
            <li>
              <div align="center"><a class="MenuBarItemSubmenu" href="#">Item 1</a>
                <ul>
                  <li><a href="#">Item 1.1</a></li>
                  <li><a href="#">Item 1.2</a></li>
                  <li><a href="#">Item 1.3</a></li>
                </ul>
              </div>
            </li>
            <li>
              <div align="center"><a href="#">Item 2</a></div>
            </li>
            <li>
              <div align="center"><a class="MenuBarItemSubmenu" href="#">Item 3</a>
                <ul>
                  <li><a class="MenuBarItemSubmenu" href="#">Item 3.1</a>
                    <ul>
                      <li><a href="#">Item 3.1.1</a></li>
                      <li><a href="#">Item 3.1.2</a></li>
                    </ul>
                  </li>
                  <li><a href="#">Item 3.2</a></li>
                  <li><a href="#">Item 3.3</a></li>
                </ul>
              </div>
            </li>
            <li>
              <div align="center"><a href="#">Item 4</a></div>
            </li>
            <li>
              <div align="center"><a href="#">Untitled Item</a></div>
            </li>
          </ul>
        </div><!-- end .sidebar -->
        <div class="slider">
          <div align="center"><img src="images/kero.jpg" width="250" height="220" alt="kero" /></div>
        </div><!-- end .slider -->
        <div class="container">
            <div class="leftbar"> </div><!-- end .leftbar-->
             <div class="rightbar"></div><!--end .rightbar -->
        </div><!-- end .container2 -->
        <div class="footer"></div><!-- end .footer -->
    </div><!-- end .mainbody -->
    thank you

  • How to make a picture fit an entire page in a pages

    how to make a picture fit an entire page in a pages

    Hello belluchis,
    Thanks for using Apple Support Communities.
    After inserting your image into your Pages document, follow the instructions in the Pages help section below to learn how to manipulate the object:
    Resize, rotate, and flip an object - Pages Help for Mac
    http://help.apple.com/pages/mac/5.2/#/tan114930688
    Take care,
    Alex H.

  • Make a StringItem fit the screen width

    Hi,
    I�m using a String Item in a Form and I�ve tried to make the Item fit the screen width by using the setPreferredSize(). But if the Text of the String Item is to long, the device still uses a second line to display the end of the text, which I don�t want.
    This is how I tried to make my String Item be displayed on an unique line.
    iTitleString = new StringItem("title : ","",Item.PLAIN);
    int preferedWidth = this.getWidth();
    iTitleString.setPreferredSize(preferedWidth,-1);
    iTitleString.setText("blablablablablalblablalblalbla");
    Thanks for your help

    If you mean that it should fit to the screen width by making the font smaller, then you're out of luck. You can try setting a preferred height to avoid multiple lines, but in a best case scenario it would just mean that not all of the text will be displayed.
    shmoove

  • JavaFX 2.0 : How to make a stage fit into browser view area?

    Invoking a JavaFX 2.0 applet from browser results in white spaces on the right and bottom area of the browser. This happens when the JavaFX stage resolutions is lesser than that of browsing desktop resolution. In a client/server model, usually server components doesn't know about the client resolutions. So how to make a stage fit into browser view area?
    Also I think, setting the primary stage to full screen mode is not what I want to achieve, as this mode overlays the browser window.

    Try typing 100% into the width and height fields. Alternatively, you could use Javascript (no connection to Java in spite of the name) to create an event to resize the applet to the window's size.

  • At the moment I have a long Griffin charging cable. Unfortunately now that I have the Smart Case this won't fit through the available hole. Is there any other make that will fit that has the none  lightening fitting that I want.

    At the moment I have a long Griffin charging cable. Unfortunately now that I have the Smart Case this won't fit through the available hole. Is there any other make that will fit that has the none  lightening fitting that I want.

    I wonder if this comment on the Amazon site is the answer to my problems?
    PLEASE NOTE: In order to provide the same power output as an original 3 ft Apple USB cable, the housing of our 6.5 ft cables need to be a bit larger. Due to the larger head size, it will not be compatible with some cases that have a smaller charger opening
    If that is the case then I am stuck with the Griffin one or just use the original.
    Thanks for your observations guys

  • Make flash website fit to screen

    Hi! I'm having trouble width my AS3 flash site. I know there is a code that will make my website fit to any browser. but i can't find it anywhere?? Can anybody help me out here??

    stage.displayState = "fullScreen"

  • Make the panel fit the image so MouseListener only invoke when click  image

    I want to add MouseListener to only the image itself. So I draw the image onto a image panel, add that panel onto the main panel, then add the main panel onto the frame. However, my problem is that the size of my image panel is too large, it take up almost the entire frame. So my mouselistener response not only when I click onto the image, but also anywhere in my image panel. I try to resize the image panel to fit the size of my image, but no luck. Is there a solution for this. I feel like, it got something to do with the layout. Here is my code, if you mind read it. Thank you very much
    import java.awt.BorderLayout;
    import java.awt.Color;
    import java.awt.Dimension;
    import java.awt.Font;
    import java.awt.Graphics;
    import java.awt.Graphics2D;
    import java.awt.Image;
    import java.awt.Toolkit;
    import java.awt.event.MouseAdapter;
    import java.awt.event.MouseEvent;
    import java.awt.event.MouseMotionListener;
    import javax.swing.*;
    public class ImageRotate
         private static final String LABEL = "MIDI PROTOCOL";
         private JPanel mainPanel = new JPanel();
         private JPanel labelPanel = new JPanel();
         public ImageRotate()
              mainPanel.setOpaque(true);
              mainPanel.setBackground(Color.YELLOW);
              mainPanel.setLayout(new BorderLayout());
              Font labelFont = new Font("serif", Font.BOLD, 30);
              createLabelPanel(LABEL, labelFont);
              labelPanel.setOpaque(false);
              mainPanel.add(labelPanel, BorderLayout.NORTH);
              Drawing d = new Drawing();
              d.setOpaque(true);
              d.addMouseListener(new MouseAdapter(){
                   public void mousePressed(MouseEvent e)
                        System.out.println("Pressing on the image");
              d.addMouseMotionListener(new MouseAdapter(){
                   public void mouseDragged(MouseEvent e)
                        System.out.println("Dragging the image");
                   public void mouseMoved(MouseEvent e)
              mainPanel.add(d, BorderLayout.CENTER);
         private void createLabelPanel(String str, Font font)
              JLabel label = new JLabel(str);
              label.setFont(font);
              label.setForeground(Color.RED);
              labelPanel.add(label);
         public JPanel getPanel()
              return mainPanel;
         public static void main(String args[])
              JFrame frame = new JFrame();
              frame.getContentPane().add(new ImageRotate().getPanel());
              frame.setSize(new Dimension(300, 300));
              frame.setVisible(true);
    class Drawing extends JPanel
         Image img;
         public Drawing()
              setSize(new Dimension(100,100));     //Try to make the panel fit the image...NO LUCK
              setBackground(Color.GREEN);     
              img = Toolkit.getDefaultToolkit().createImage("images/nob.gif");
         public void paintComponent(Graphics g)
              super.paintComponent(g);
              Graphics2D g2D = (Graphics2D)g;
              g2D.drawImage(img, 40, 40, this);
    }

    yunaeyes wrote:
    In class Drawing extends JPanel, I did try to to set the panel to the image size but no luck there,
    both setSize(new Dimension(100,100)), setPreferredSize(new Dimension(100,100)) does not make the panel smallerIt can be made to work. I find it hard to comment on unseen code.
    >
    BigDaddyLoveHandles wrote:
    I think a better approach is to handle the mouse click properly -- see if the click is over the image or not.Can you elaborate on this?The mousePressed method you posted assumes you are over the image. Check the mouse coordinates! If the component is bigger than the image this may not be so.

  • How do I make music categories and move recorded music to them?

    How do I make music categories?  I recoded CDs to my iMac hard drive and the on to my iPod nano but donotknownow to organize them.

    So you imported a few CDs to your iTunes library or did you use another application to import them to your iMac's HD?
    Perhaps this article can help.
    iTunes: Syncing media content to iOS devices and iPod
    B-rock

  • I'm wondering about using Apple loops in music. Is it ok to do so to make music for people to hear, without it being sold. And how do you get permission to use them in music to sell?

    I'm wondering about using Apple loops in music. Is it ok to do so to make music for people to hear,like on soundcloud or other websites, without it being sold. And how do you get permission to use them in music to sell?

    From the LOGIC STUDIO SOFTWARE LICENSE AGREEMENT   :
    C. Except as otherwise indicated, you may use the Apple and third party audio file content (including, but not limited to, the Apple Loops, built-insound files, samples and impulse responses) (collectively the “Audio Content”), contained in or otherwise included with the Apple Software, on aroyalty-free basis, to create your own original soundtracks for your film, video and audio projects. You may broadcast and/or distribute your ownsoundtracks that were created using the Audio Content, however, individual Apple loops, audio files, sound settings, samples and impulse responsesmay not be commercially or otherwise distributed on a standalone basis, nor may they be repackaged in whole or in part as audio samples, soundfiles, sound effects or music beds.
    This means, you can use all Apple Loops in your music, they're royality-free.
    Best,
    DaCaptain

  • How to make a photo "fit" with the surrounding film clips?

    I am working on a new project in which I have a photo which is "taller" than the other film clips, so consequently, when that clip is playing, one cannot see the top or the bottom because they have been cropped off to match the height of the other film clips.
    What can I do to make that picture "fit"? It is important because this is a photo of a person, not just landscape.
    -L
    Message was edited by: Lorna from Hawaii

    I clicked a button that said Ken Burns!!! I figured it out.
    -L

  • How to make a picture fit my monitor

    i want to make a picture fit my computer's monitor or screen and not lose its quality or change how the picture looks

    Press' f ' to cycle through screen modes and choose your preferred option then press 'Ctrl 0'.  (Ctrl zero)

  • Can I make music with these external sound car

    Hello,
    Could you tell me more information about external sound card SoundBlaster Surround 5. 24-bit's I want make music with my USB electronic keys and for this I must have very low sound latence. I have notebook with integrated sound card, and latence is to high, so I can't playing on my keys!
    I need informations about ASIO and MIDI drivers and other info about HW latence.
    Thank you very much for answer.

    Any USB card surely won't make the latency any better. If you want a laptop for professional music use, you should probably opt for a Macbook.

  • How can I make a photo fit my iPhone 6 as wallpaper?

    I have an iPhone 6, and would like to set a photo as wallpaper, but no matter how I crop and try to resize it, it does not fit and an edge is cut off. 
    Any tips on how to make a photo fit?  I did not have this problem with my previous iPhone 4s.

    The easiest way is to select the photo you want to use.  Then edit it (crop, enlarge, move left/right/up/down) then when you are happy with it - take a screen shot (tap sleep/wake button at same time tapping Home button).  Use this saved image as your wallpaper.

Maybe you are looking for