Make my header columns tall and narrow and place the text sideways

I'd like the header columns to be very narrow and tall and the text to be sideways. I can't figure out how to make it work. My temporary fix is to place textboxes over the columns, but they don't "belong" to the column and don't move with the table. It also can't be share in this format. I'd like it to look like a grade book. please help!! I'm stymied!

You can add a graphic to the cell's background, and that graphic can be a PDF version of the rotated text box. Here's the routine:
Copy Text Box
Switch to Preview.app
Command-N
Command-C
Switch to Numbers
Select Header Cell
Command-V
Doing it this way the graphic will not only stay with the cell, it will scale if you change the size of the cell.
Jerry

Similar Messages

Photoshop says "Rendering Type" and loads for a very long time, how do I fix this? I'm new to Photoshop and I was trying to learn how to make a watermark. This happens once I press the "Text" tool. I'm using a Mac with OS X. Please help, thank you.

Photoshop says "Rendering Type" under a "Progress" Bar that shows up. I'm trying to create a watermark and this happens when I press the "Text" tool. Please help, I'm new to Photoshop. Thank you.

So you created a document 192000 pixels wide, and 108000 tall, and set the type to be 2 inches tall. Yes, the type is going to take a few minutes to render in that document.
Yes, you created a document much bigger than you probably intended (you probably wanted 1920 PIXELS by 1080 PIXELS).
Pixels and inches are not the same, and you need to pay attention to the units.

I have tried to install office for mac and an iWork trial and each time I go to install my "terminal" opens with the heading bash-80X24 and in the box reads Joel$-office installer.mpkg joel$ . nothing further happens

I have tried to install office for mac and an iWork trial and each time I go to install after downloading my "terminal" opens with the
heading
bash-80X24 and
in the box reads Joel$-office installer.mpkg joel$ .
nothing further happens

This is thread from Apple discussions.
Look for the suggestion from Shootist007 towards the end of the 2nd page.
It is just may be useful.
https://discussions.apple.com/thread/3709115?start=15&tstart=0

E payment should be enabled so that the user could make payment directly from SAP and after the payment is verified ,approved and authorized by the concerned users responsible the payment should be electronically transferred to the payee's bank account th

E payment should be enabled so that the user could make payment directly from SAP and after the payment is verified ,approved and authorized by the concerned users responsible the payment should be electronically transferred to the payee’s bank account through our bank.

Thanks,
I usually use the OS connection option. So as you suggest, connect without the ISP connection software. Doing so does not by-pass the sudo command being active in Activity Monitor however.
On reading my post I see my failure to link the concerns of the laptop purchase with the sudo and modem. My thought here is of an intersection of known vulnerability with this widely used modem/software (via permanent sudo process activated) and that vulnerability then being known and utilised by another party(s).
I am pursuing the issue in part with consideration to a broader possible issue of vulnerability.
Thanks again for your thoughts and suggestions. Valued.

Subsinvprocess in the sales order header --- billing tab and in the custom

Hello All
there is a field SubsInvProcess in sales order header - billing- tab and in the customer master - billing tab
what was the functionality of this field. I never worked with it
kindly help on this one.
Thanks,
prasad

Dear Vara prasad,
The value of this field is if you want to print the invoices that are being posted manually you can activate this field.
It will be directly proposed from customer master to sales document, where you can change.
Please let me know if you want any further clarifications.
Please go through this thread also for further reference.
Clarification for usage of Subsequent Invoice Processing in Customer Master
Thanks&Regards
Raghu.k

How to Read the one Source Column data and Display the Results

Hi All,
I have one PR_ProjectType Column in my Mastertable,Based on that Column we need to reed the column data and Display the Results
Ex:
Pr_ProjectType
AD,AM
AD
AM
AD,AM,TS,CS.OT,TS
AD,AM
like that data will come now we need 1. Ad,AM then same we need 2. AD also same we need 3. AM also we need
4.AD,AM,TS,CS.OT,TS in this string we need AD,AM only.
this logic we need we have thousand of data in the table.Please help this is urgent issue
vasu

Hi Vasu,
Based on your description, you want to eliminate the substrings (eliminated by comma) that are not AD or AM in each value of the column. Personally, I don’t think this can be done by just using an expression in the Derived Column. To achieve your goal, here
are two approaches for your reference:
Method 1: On the query level. Replace the target substrings with different integer characters, and create a function to eliminate non-numeric characters, then replace the integer characters with the corresponding substrings. The statements
for the custom function is as follows:
CREATE FUNCTION dbo.udf_GetNumeric
(@strAlphaNumeric VARCHAR(256))
RETURNS VARCHAR(256)
AS
BEGIN
DECLARE @intAlpha INT
SET @intAlpha = PATINDEX('%[^0-9]%', @strAlphaNumeric)
BEGIN
WHILE @intAlpha > 0
BEGIN
SET @strAlphaNumeric = STUFF(@strAlphaNumeric, @intAlpha, 1, '' )
SET @intAlpha = PATINDEX('%[^0-9]%', @strAlphaNumeric )
END
END
RETURN ISNULL(@strAlphaNumeric,0)
END
GO
The SQL commands used in the OLE DB Source is like:
SELECT
ID, REPLACE(REPLACE(REPLACE(REPLACE(dbo.udf_GetNumeric(REPLACE(REPLACE(REPLACE(REPLACE([ProjectType],'AD,',1),'AM,',2),'AD',3),'AM',4)),4,'AM'),3,'AD'),2,'AM,'),1,'AD,')
FROM MyTable
Method 2: Using a Script Component. Add a Derived Column Transform to replace the target substrings as method 1, use Regex in script to remove all non-numeric characters from the string, add another Derived Column to replace the integer
characters to the corresponding substring. The script is as follows:
using System.Text.RegularExpressions;
Row.OutProjectType= Regex.Replace(Row.ProjectType, "[^.0-9]", "");
References:
http://blog.sqlauthority.com/2008/10/14/sql-server-get-numeric-value-from-alpha-numeric-string-udf-for-get-numeric-numbers-only/
http://labs.kaliko.com/2009/09/c-remove-all-non-numeric-characters.html
Regards,
Mike Yin
TechNet Community Support

Hi, after submission of the form, can the respondents make changes to their answers and submit the form again without completing every single question?

Hi there,
After submission of the form, can the respondents make changes to their answers and submit the form again without completing every single question?
Thanks for your help
Paline

Hi Paline,
Unfortunately this cannot be done.However, being the author of the form you can make the required changes in the response file.
Thanks,
Vikrantt Singh

Lines above and below the text

Hello
I am working in a file created by somebody else and am having a problem with styling - I just cant figure how it was created.
There are lines running the length of the text box below the heading. When i try to remove the text the line dissapears as well, so clearly its somehow inbedded in that box. There are other instances when i remove the text box but the lines stay and i cant remove them at all, i cant click on them... (at first i thought they were a part of the master but clicking comand shift doesnt get them off). what are these? can somebody help please?
thanks a lot
mae

Hi Peter
no, they are not paragraph rules, that's what i thought at first. they are something else, very frustrating i just cant work it out...
any other ideas? and what about the ones that i cant even click on?...
thanks

Trouble with viewing font on spine of Photo book. I can't find a way to view and edit the text which appears on the spine of the dustcover or the book itself when printed.

I can't find a way to view and edit the text which appears on the spine of the dustcover or the photo book itself. When I preview the book it appears on the dustcover and the book, but not when I'm back in the creation or editing windows. I've printed 4 books in a series and two spines are one font size, and two others are a different font size. One of the books has a shortened title on the book spine.

The text on the spine will be the same text that is in the Title text box on the title page. You can change the font and style of that text just like you change any text in Aperture. Aperture will size and center the spine text for you
If you want the content or the font and style of the text to be different from your Title box text then you have to trick the program a bit. Put the text that you want in the spine into the Title text box and then move that box to a place on the page where it will not be visible when printed ( Y coordinate -1.0 inches for example). Don't move it too far away or it will be hard to get back to in order to make an edit. Then make a new text box on the title page and put the text you want on the cover in that. (Or make a book without text on the cover , but with text on the spine).
You are 100% correct in that you can not preview this unless you preview the printed book

Executing a native process and getting the text output

Hi,
I have the following problem.
When I execute a native DOS process (lets say a batch file), and
expect some text output from this process I use the following code:
String command = "test.bat";
Process process = runtime.exec(command);
BufferedReader rd = new BufferedReader(new InputStreamReader(process.getInputStream()));
String s = new String();
while((s = rd.readLine())!=null) {
out.println(s + "<br/>" );
The problem is that as long as rd.readLine() does not return null, the page does not display the result. When the process crash, sometimes nothing return.
I would like to display the output as it comes, i.e. line by line.
I have no clue on how to do that except writting the output in a text file, and reading the text file with a page that reload every x seconds.
I do not beleive this is a good solution.
Additionaly, I may have a huge output. It seems to make the process
to hang. Is there a was to fix it.
Could someone give me some hints.
Regards,
Arnaud.

I am having the same problem...did you ever solve it?

How to copy and paste the text in Russian - 'command+c' erases it

How to copy and paste the text in Russian - 'command+c' erases it

I want to publish a book with Blurb. They don't have Russian fonts, so I have to type the text in Russian in Notes in my iPad, send it to my e-mail box, and then open the e-mail box in Mac, and copy and paste the text into the book template of Blurbs. I don't know how to make a Russian keyboard in Mac to be able to type quickly. I asked about it in the Apple store, and they showed me how to find a Russian keyboard in the net, but it takes much time to type using a screen keyboard, and the texts also cannot be copied and pasted, when they are in Russian. They are erased when I press 'command+C", and all I have is a single letter 'c' instead. No problems with texts in English. Maybe Russian is not supported for copying and pasting?:(

I updated my 4s, and now the text messaging is so slow its almost unusable (type then wait 20 seconds to see characters)

I updated my 4s, and now the text messaging is so slow its almost unusable (type then wait 20 seconds or more to see characters on the screen). Help Please!

It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the sessionstore.js [2] file and possible sessionstore-##.js [3] files with a number and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
See also:
* [1] http://kb.mozillazine.org/Session_Restore
* [2] http://kb.mozillazine.org/sessionstore.js
* [3] http://kb.mozillazine.org/Multiple_profile_files_created

I have a PDF with a diagram, I need to translate the text so I open it in Illustrator. The document opnes up vertically oriented I try to put it horizontal to be able to read and change the text However everything I have done is not working The artboa

I have a PDF with a diagram, I need to translate the text so I open it in Illustrator. The document opens up vertically oriented I try to put it horizontal to be able to read and change the text However everything I have done is not working The artboard does change, but the diagram stays vertical.....Please help I need to finish that for today..Please help

A PDF usually consists of one to an indefinite number of clipping masks inside each other.
You need to be very carefull with selecting stuff.
So you need to read the manual on how to select stuff and on the basics of Illustrator.
On top of that: because of the complex hierarchy of PDF files, it is kind of difficult to help you without seeing anything.

I get a dialogue box asking "What should Firefox do with this file" Options open with or save file. My wife selected save file and now it only opens note pad and displays the text of the file to be saved. OK in windows Internet Explorer.

I get a dialogue box asking "What should Firefox do with this file" Options open with or save file. My wife selected save file and now it only opens note pad and displays the text of the file to be saved. OK in windows Internet Explorer.

P.S. Site is http://www.coldwatercreek.com

Firefox Sync setup says "Incorrect words, try again" after receiving message "Your answer was correct. Please copy and paste the text in this text box into the box below."

When setting up Firefox Sync, I get all the way to the "Please Confirm You're Not a Robot" screen in the wizard, and enter the captcha values. I then receive in a small scrollable text area the message "Your answer was correct. Please copy and paste the text in this text box into the box below."
I copy and paste the code, in this case "03AHJ_Vuv1gStVScBWSYWw6M4_KKQ4wzhCDSzKqiCfv57XXGyvHtOk4ixehysQhOTIf-lsL41lc5n-piztjYJSKu6urCeRvETVfpzRDh7OmHCDZiIBZv9Qg4oyrmWDMu6JA7Eh-4C8aZn4" into the only other visible text box, and click the next button, only to receive the message "Incorrect words, try again."
My only option is to cancel at that point. I have tried this three times, once even starting the entire process over from the start, and it ends up with the same outcome each time.

When setting up Firefox Sync, I get all the way to the "Please Confirm You're Not a Robot" screen in the wizard, and enter the captcha values. I then receive in a small scrollable text area the message "Your answer was correct. Please copy and paste the text in this text box into the box below."
I copy and paste the code, in this case "03AHJ_Vuv1gStVScBWSYWw6M4_KKQ4wzhCDSzKqiCfv57XXGyvHtOk4ixehysQhOTIf-lsL41lc5n-piztjYJSKu6urCeRvETVfpzRDh7OmHCDZiIBZv9Qg4oyrmWDMu6JA7Eh-4C8aZn4" into the only other visible text box, and click the next button, only to receive the message "Incorrect words, try again."
My only option is to cancel at that point. I have tried this three times, once even starting the entire process over from the start, and it ends up with the same outcome each time.

Make my header columns tall and narrow and place the text sideways

Similar Messages

Maybe you are looking for