Make Not 'Visible' "Setup Main Cleanup" in Step List Configuration

Hi
I dont want the Operator to see  the "Setup Main Cleanup"   text  while testing
any ideas how to acheive this
In the image  as u see the  "Setup Main Cleanup"   are unwanted info for the  Operator
& can confuse. I wasnt able to  reduce its size also
the operator only sees the  Steps with Large text 
Attachments:
steplistconfig.PNG ‏160 KB

Hi aparab,
I don't know if's possible to hide the sequence editor itself in the TestStand development system.
If you want to customize the GUI for the operator, it could be usefull to create a custom UI in LabVIEW, .NET ...
Take a look into this document for further information:
Best Practices for NI TestStand User Interface Development - National Instruments
http://www.ni.com/white-paper/7560/en/
Regards, Stephan

Similar Messages

  • Import sequenceview control property from step list configuration

    I have worked out a  step list configuration  in my development maschine
    How to import it in  a User Interface (labview simple UI) . I  have to  run it on my deployment maschine 

    Hi aparab,
    thank you for your answer.
    I am stil not sure what you exactly want to change.
    If you only want to change the view of the Simple User Interface between Edit Mode and Operating Mode, you can do so by selecting Ctrl + Alt + Shift + Insert.
    If you want to manipulate the look of the Sequence File, this is an X-Control in the background. If you need another look, you can change the control on the Simple User Interface in LabVIEW. But you have to implement all the functionality by yourself then.
    There is a toolkit called FlexStand, that might be a solution for you. I added the links to some information about it and the product page below.
    FlexStand Operator Interface™ - The Flexible NI TestStand Operator Interface - National Instruments
    http://www.ni.com/white-paper/11016/en/
    FlexStand Operator Interface™ von CIM Industrial Systems - National Instruments
    http://sine.ni.com/nips/cds/view/p/lang/de/nid/210040
    I hope, one of the points above answer your question. Otherwise, let me know and describe what you exactly what to manipulate and how it should look like. You can add some screenshots, that help me understand.
    Regards,
    Melanie

  • How to deploy custom Step List Configurations?

    Step List Configurations is accessible to user via right click menu in Sequence File and Execution panes. How to deploy the custom Step List Configuration what I have at my deployment computer? Next question, if the user will modify this menu, how do not overwright the local changes with a new version installation?
    Sergey Kolbunov
    CLA, CTD

    skof,
    To you copy your Step List Configurations to another PC you can find them stored in the layout_current.bin file found in C:\Documents and Settings\<windows username>\Local Settings\Application Data\National Instruments\TestStand X.X directory.  If you copy this file to the same location on another PC, or even on the same PC to a different user account, your Step List Configurations should carry over.
    Since this file is stored in a directory that is different for each major version of TestStand, you shoulnd't have to worry about overwriting it if you install a new major version (4.2 over 4.1). I haven't tested for minor revisions that would share a folder (4.0 & 4.0.1) but that would be the only situation in which you might need to be concerned.
    John B.
    Applications Engineer
    National Instruments

  • Edit step list configurations

    In teststand 3 and earlier, when executing a sequence it was shown in a column the result of the step and the high limit and low limit
    Now in TS 4 it is possible to edit the step list but i did not manage to show the step result . For example if i create a new column (type expression) and just put Step.Result.numeric, xhen executing the sequence I have a popup because for some steps there is no step.result.numeric available.
    My question is how to have the same as TS 3 and earlier ( Result + limits in a column when executing a sequence)

    Note that the numeric measurement appears as part of the description for the numeric limit test. The default TestStand 4.0 step list configuration has a description column, just like previous versions.
    I guessing that you probably know this and are purely interested in creating a custom step list configuration, but I wanted to be clear that this functionality has not been removed.

  • Modifier "step list configuration" Teststand 3.5

    Bonjour, Je voudrais modifier les "steps liste configuration" sous Teststand 3.5. Je sais que la fonction existe sour la version 2010. Je voudrais ajouter des colonnes. Cette fonction existe sous Testsand 3.5 ?

    Bonjour geof31,
    Je pense que les documents devraient vous aider à vérifier si les actions peuvent être réalisées sous TestStand 3.5 :
    Where are my TestStand Step List Configurations Stored?
    Changing Columns Properties of the TestStand Sequence Editor Execution View Window
    How Can I Hide Comments in TestStand?
    Adding Step Numbers to Your Sequences
    Cordialement,
    Jérémy C.
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    Travaux Pratiques d'initiation à LabVIEW et à la mesure
    Du 2 au 23 octobre, partout en France

  • IPhone not in iTunes (after following all steps listed in Apple support)

    My iPhone is not appearing in iTunes, even after I followed all the steps listed in the apple support assistant. (It is still being recognized as a camera when plugged in) The steps I already tried include updating iTunes software, restarting iPhone, restarting computer, updating computer software, and choosing a different USB port...
    I have Mac OS X 10.6.3, iTunes version 10.6.3, and an iPhone 4 (without the newest software update).
    Any ideas?
    Thanks!

    Okay, now I tried to complete #5 on that webpage you just posted, and have lost iTunes...
    I followed the steps for Reinstall the Apple Mobile Service Device, but the reinstalled version is only for 10.6.8 and later. I have 10.6.3. How do I get iTunes back after I uninstalled it?

  • Cp7 - Text objects appear in filmstrip but are not visible in main window

    Hi all
    A problem has surfaced this week. When I open up any existing quiz projects, text objects aren't appearing. You can see on the filmstrip in the attached screenshot that there are 5 text objects on slide 1. However, none are showing up in the main window.
    Clicking the preview button has no effect, whilst if I try to double-click on one of the text boxes I am bombed out of Captivate.
    The files themselves are fine as my colleague has opened them no problem, so I've tried uninstalling Captivate and re-installing but this hasn't worked.
    I had a webchat with one of Adobe's support representatives who asked me to copy the slides to a new project. This worked but it's going to take ages to do this for all of our existing projects.
    Any ideas why Captivate is doing this?
    Thanks!
    MJ

    Thanks for continuing to help out with this!
    I have tons of general projects that combine various elements. However, the ones that have stopped working are those that feature quiz question slides. You're right, the slide highlighted in my screenshot isn't a question slide itself, but the same issue is occurring for all slides in any project that contains a quizzing element.
    These projects also make use of the Google LMS Widget. I'm not sure if that is having an effect.
    Thinking about it, I did install a MacOS security update over the weekend that was pushed to my Macbook. Perhaps that has in some way conflicted with the widget or quizzing element? Like I pointed out in my original post, I have no problem with any projects that include quizzing and the widget that I have created this week. It's just affecting any of these projects from before this week.
    It must have been this update: About Security Update 2015-002 - Apple Support

  • Step List Configuration Question

    Hi,
    I'm using TS2010 in .NET ,Is it possible to change my custom
    list configuration through my application(font size,width,etc..).
    Thanks
    Assaf

    Assaf,
    yes, it is possible.
     The key to start with is "axFileSteps.". In the context menu, browse for the property you want to modify.
    Font-settings for instance split up into three categories:
    Text
    Header
    Comment
    hope this helps,
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • Payload not visible in the XI monitor

    In my scenario an xml message was successfully reaching its destination. The XI system was upgraded from support pack 13 to support pack 16. After that the process is still working fine as the XML message is still successfully reaching its destination. The issue we have is that the ‘Payload’ is not visible in the last two steps of the monitor. We can see the Payload until ‘Technical Routing’ in the monitor. But ‘Call Adapter’ and ‘Response’ steps do not have payload.
    (TCode: SXMB_MONI)
    when we double click a message we get XML message details and on the left hand side it shows following hierarchy:
    XML Message:
    Receiver Grouping
       -     SOAP Header
       -     SOAP Body
       -     Payloads
    Request Message Mapping
       -     SOAP Header
       -     SOAP Body
       -     Payloads
    Technical Routing
       -     SOAP Header
       -     SOAP Body
       -     Payloads
    Call Adapter
       -     SOAP Header
       -     SOAP Body
    <b>(( No Payload displayed, but present above!! ))</b>
    Response
       -     SOAP Header
       -     SOAP Body
    <b>(( No Payload displayed, but present above!! ))</b> 
    Any suggestions would be highly appreciated!
    Thanks in advance.
    Faiq

    Hi faiq
    This seems to be the normal behaviour starting with SP13 or 14. There was a discussion about this a while ago and I believe it turned out to be works as designed.
    This is what was posted as final conclusion in Re: SXMB_MONI does not show payload after upgrade to SP15:
    <i>According to SAP (OSS) this is working as designed. Apparently it was an error in the past that the payload was stored in the DB on the ABAP (IE) side when the AE is involved, as it would then be stored twice at DB level. This explains why this is not a problem when e.g. the IDOC adapter is used.
    Anyway, the only way to let the system show the payload in SXI_MONITOR is to set the runtime trace level to 3 (full trace) and parameter logging to 1 (trace switched on).</i>
    regards,
    Peter

  • Content not visible while using DVBClassLoader

    Hi, we have a problem with DVBClassLoader. We need to download several *.class files from WWW server in our application. The file is downloaded, but the problem is that the content is not visible for main Xlet class. Can someone help us please???
    try {
                   classPath[0] = new java.net.URL("file:" + sBuffer.toString());
                   System.out.println("URL is " + classPath[0]);
                   classPath[1] = new java.net.URL("http://XXX.YYY.146.233/");
              } catch (MalformedURLException e) {
              cl = DVBClassLoader.newInstance(classPath);
              try {
                   cl.findClass("SecondClass");
                   System.out.println("SecondClass read");
              } catch (ClassNotFoundException e) {
              secondClass = new SecondClass(context, scene, mainContainer, telo);
              secondClass.display(path1);

    I haven't tried it, but it looks to me like you need to provide the parent ClassLoader in order to handle delegation to the DVBClassLoader.
    intstead of this: DVBClassLoader.newInstance(classPath);
    use: DVBClassLoader.newInstance(classPath, getClass().getClassLoader());

  • In Business Rule child elements of Unbounded element are not visible.

    Hi All,
    Jdev version 11.1.1.7.0
    I am facing one issue in Business Rule...
    Scenario: I am creating Approval Service (BPEL) with Human Work flow and Bunises Rule.
    I am assingning participant in HW by using Rule based(Connecting HW and BR).
    Problem here is:
    Shema has "unbounded" element.
    <element name="ExpenseItem" maxOccurs="unbounded">
         <complexType>
          <sequence>
           <element name="ItemID" type="string"/>
           <element name="ItemName" type="string"/>
           <element name="ItemPrpjectID" type="string"/>
           <element name="ItemStatus" type="string"/>
          </sequence>
         </complexType>
        </element>
    Whenever I create Busines rules to configure rules.
    While configuring rules child elements of  ExpenseItem are not visible. But those are neccesary to configure rules.
    If you can help to me resolve would help.
    Is it a bedault behaviour of BR? If so how can i acheive this?
    Thanks,
    Santosh

    Solution found:
    Click on RuleSet which you have created.
    Expand Rule inside it.
    Enable Advanced mode and Tree mode and click OK.
    Select Root as Task and click on insert pattren and create pattren which is based on unbounded element (here its meant as fact)
    Once you create pattren , will be able access elements under unbounded element for Business rule configuration.

  • Operations are not visible

    Hi All,
    I am in CE 7.1.1 EHP1. I have declared the DC usage dependency of a composite application project in another composite application project. At development time I can find the application service of the used project but unable to get any public operations that are there in that application service.
    Has anybody any clue?
    Regards
    Sunit

    Hi
    Some configuration issue of private or Public , it is not visible means it is made  private in configuration.
    Best Regards
    Satish Kumar

  • HT201363 How can I make an Apple ID without credit card if the "none" tab is not visible to me?

    How can I make an Apple ID without credit card if the "none" tab is not visible to me?
    Help me out please

    Hello, aligt9p. 
    Thank you for visiting Apple Support Communities. 
    To create an Apple ID without a credit card, there is a specific series of steps that have to be processed in order to allow the payment to be set as none on creation of the account.
    Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card
    http://support.apple.com/kb/HT2534
    Why can’t I select None when I edit my payment information?
    http://support.apple.com/kb/TS5366
    If the specific steps have not been processed, a credit or debit card will be required to complete the setup the account.
    However, it can be removed and payment method changed to none as long as there is not an outstanding balance.
    iTunes Store: Changing account information
    http://support.apple.com/kb/ht1918
    Cheers,
    Jason H. 

  • Activity step is not visible in workflow log

    Hi All.
    I added two task  in my workflow and transported it to qualityand it got transpported successfully.
    then i triggered the workflow and when i am checking the log
    one of my task is not visible in my log.
    Please guide me in this.
    Thanks in  advance
    Regards
    Anit

    I feel like you have to re check the activity steps defintion  under the tab Details , in this tab, you have a section Workflow log ---> Graphical represnetation make sure that you hvae selected the In All workflow Logs....
    This could be one of the reason that why the workitem is not appearing in the workflow log....
    And even under the OUTCOMES tab you have a check box where you can say that if this is the outcome then do not display in the workflow log so please even recheck under the outcomes tab of the activity step if any of the check box is enabled please disable it and then try to reimport to the other system and check...

  • Goods are not visible on the Web Shop main page (RUMP UP)

    Hi colleagues.
    Help please anybody :)
    There was the problem with the goods in Web Shop.
    Goods are not visible on the page Web Shop.
    Below you can see actions performed by us and Prerequisites:
    1. Repository was unachieved from Standard archive - WEC20_MDMCATALOG_CONS
    2. Taxonomy, Hierarchy and Lookup table data were transferred from CRM via MDMGX
    3. Manually created root node in Product Catalogs table in MDM
    4. Put technical code (ID) of created node to Product Catalog module in WCEM configuration - field Catalog ID.
    5. Fill another necessary fields in Product Catalog module in WCEM.
    6. Manually add test record in MDM and linked to node in Product Catalog table, elements from Main Taxonomy and other required fields.
    7. In preview mode of WCEM configuration not possible see any records from MDM (but product catalog elements showed correctly)
    More information about settings in MDM, CRM,WCB and configuration steps can see in attachment files
    Best regardn,
    Andrey

    Hi Denis
    Leading zeroes it's no my case, because the products (materials) replicated from CRM to MDM.
    Replication from CRM to MDM via MDMGX and Initial Load R3AC1 is successfull.
    But on the WebChannel web shop page this products are not visible.
    I have suggested that the problem in authirizations of technical user, which uses RFC Destinations from SAP NW AS Java (Web Channel) to MDM.
    According Security Guide for SAP Web Channel 2.0 (paragr. 8.3.2 see please screenshot), user of WEC_MDM_DEFAULT destination must assign the role WEBCHANNEL_CATALOG_DISPLAY_ROLE.
    But this role does not exist in the system (SAP MDM, SAP NW).
    Please give me advice about this.

Maybe you are looking for