Make only one layer of a video brighter

Hi,
I have few layers of videos, I am trying to make only one layer brighter.
How can I do that?
Thanks,

Hmm, select the layer in the timeline, go to the effects menu, scroll down to color correction, in that menu choose brightness and contrast and adjust the brightness to your liking. It will only be applied to that layer.

Similar Messages

  • HT2506 After updating my system to Mountain Lion 10.8.2 I can no longer view videos on Facebook or other sites. The only one I can view videos on is youtube. I have downloaded Adobe Flash player and still no luck. I cannot even open Preview on my computer

    After updating my system to Mountain Lion 10.8.2 I can no longer view videos on Facebook or other sites. The only one I can view videos on is youtube. I have downloaded Adobe Flash player and still no luck. I cannot even open Preview on my computer anymore. Any ideas would be helpful thanks

    Merely clicking the Preview icon in the Dock doesn't cause it to open anything, unless you had one or more windows open the last time it quit.
    If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test.
    1. If you're getting a "blocked plug-in" error, triple-click the line below to select it:
    /Library/Internet Plug-Ins Right-click or control-click the highlighted text and select
    Services ▹ Open
    from the contextual menu. A folder should open. If there is more than one item in the folder with the words "Flash Player" (not "flashplayer") in the name, open the respective Info windows, check the version numbers, and delete all except the latest. You may be prompted for your login password. If you get the same error after doing that, re-download and reinstall Flash. Download it from this page:
    Adobe - Install Adobe Flash Player
    Never download a Flash update from anywhere else.
    2. If you get a "missing plug-in" error, select
    Safari ▹ Preferences... ▹ Security
    from the Safari menu bar and check the box marked Enable plug-ins.
    3. Select
    Safari ▹ Preferences... ▹ Extensions
    from the Safari menu bar. If any extensions are installed, disable them.
    4. In the Safari preference window, select
    Privacy ▹ Remove All Website Data
    Close the window. Then select
     ▹ System Preferences… ▹ Flash Player ▹ Advanced
    and click Delete All. Close the preference pane.

  • Replace one channel by another on only one layer, leaving the others intact?

    Hello. In a CMYK image, I need to turn on only one layer one channel completely into another, while the others remain intact. The M channel (the M on that layer) contains information, but I can't print M in this place. I want to change it into an equal amount of K (or into C, in the present case, or even into a mixture of the two). I know how to do this to an entire image (change into greyscale, duotone or whatever may apply). But since I need this to apply to only one (or a selection of) layer(s), leaving all others intact, this is not an option here. I'm sure there's a way to achive this, but I can't find it. Any advice would be much appreciated.

    bustamant wrote:
    hello, thanks for your replies. As far as I understand, Channel Mixer (i.e., an Adjustment Layer containing a Channel Mixer applied to the layer in question) allows me to reduce one channel to zero,
    You are completely correct up to here...
    Then choose K as the desired output channel at the top of the palette and slide the M (source) slider to the desired value.  You can choose more output channels by going to each output channel in turn.
    The way it works is slightly confusing at first, but in a nutshell, you choose your output channel first, then mixture of sources.  Then move to another output channel and the sources will be at the default position for THAT output channel only.  Each channel has a set of source channels assigned to it.
    Default;  black output channel = 100% black source, 0% CMY
    So your example is black output = 100% black source plus 100% mag source (although I expect you are going to change black source to 0)
    AND magenta output = 0% Magenta 0% CYK source  (no mag output at all)

  • I want to make only one node draggable in the tree. How?

    I want to make only one node draggable in the tree. How?
    when we have only
    tree.setDragEnable(true)which makes draggable the entire nodes in the tree.
    Thanks -

    Hi Andrea
    Just to clarify things up: is this what you want?
    package treeDnD;
    * DragJustOneNode.java
    import java.awt.*;
    import java.awt.datatransfer.*;
    import java.awt.dnd.*;
    import java.io.*;
    import javax.swing.*;
    import javax.swing.tree.*;
    public class DragJustOneNode extends JFrame {
        private JTree tree;
        private DefaultTreeModel model;
        private DefaultMutableTreeNode root;
        public DragJustOneNode() {
            super("Only child 1 is draggable!");
            setDefaultCloseOperation(WindowConstants.EXIT_ON_CLOSE);
            setSize(400,300);
            setLocationRelativeTo(null);
            tree = new JTree();
            tree.setDragEnabled(true);
            getContentPane().add(new JScrollPane(tree), BorderLayout.CENTER);
            tree.setTransferHandler(new TreeTransferHandler());
            root = new DefaultMutableTreeNode(new NodeData(0, "root"));
            root.add(new DefaultMutableTreeNode(new NodeData(1, "child 1")));
            root.add(new DefaultMutableTreeNode(new NodeData(2, "child 2")));
            root.add(new DefaultMutableTreeNode(new NodeData(3, "child 3")));
            root.add(new DefaultMutableTreeNode(new NodeData(4, "child 4")));
            model = new DefaultTreeModel(root);
            tree.setModel(model);
        public static void main(final String args[]) {new DragJustOneNode().setVisible(true);}
    class NodeData{
        private int id;
        private String data;
        public NodeData(final int id, final String data){
            this.id = id;
            this.data = data;
        public int getId() {return id;}
        public void setId(final int id) {this.id = id;}
        public String getData() {return data;}
        public void setData(final String data) {this.data = data;}
        public String toString() {return data;}
    class TreeTransferable implements Transferable{
        private NodeData nodeData;
        public TreeTransferable(NodeData nodeData){
            this.nodeData = nodeData;
        public DataFlavor[] getTransferDataFlavors() {
            return new DataFlavor[]{DataFlavor.stringFlavor};
        public boolean isDataFlavorSupported(DataFlavor flavor) {
            return true;
        public Object getTransferData(DataFlavor flavor) throws UnsupportedFlavorException, IOException {
            return nodeData;
    class TreeTransferHandler extends TransferHandler{
        private DefaultMutableTreeNode sourceNode, targetNode;
        public boolean canImport(final JComponent comp, final DataFlavor[] transferFlavors) {
            NodeData nodeData = (NodeData) (sourceNode).getUserObject();
            if(nodeData.getId() == 1) return true;
            return false;
        protected Transferable createTransferable(final JComponent c) {
            JTree tree = ((JTree)c);
            sourceNode = (DefaultMutableTreeNode) tree.getLastSelectedPathComponent();
            return new TreeTransferable((NodeData) sourceNode.getUserObject());
        public int getSourceActions(final JComponent c) {return DnDConstants.ACTION_MOVE;}
        public boolean importData(final JComponent comp, final Transferable t) {
            JTree tree = ((JTree)comp);
            DefaultTreeModel model = (DefaultTreeModel)tree.getModel();
            targetNode = (DefaultMutableTreeNode) tree.getLastSelectedPathComponent();
            DefaultMutableTreeNode parent = (DefaultMutableTreeNode)targetNode.getParent();
            if(parent == null) return false;
            model.removeNodeFromParent(sourceNode);
            model.insertNodeInto(sourceNode, parent, parent.getIndex(targetNode));
            tree.setSelectionPath(new TreePath(model.getPathToRoot(sourceNode)));
            return true;
    }

  • How to make only one round corner?

    HI,
    How can I make only one (or 2) round corner on a square using the round corner effect?

    You don't say what version you're using, but I know that in CS3 (and probably CS4), there is a script installed that you can use.
    Draw your frame. Open the Scripts panel. Open the subfolders "Application", then "Samples", then "Javascript". With your Frame selected, double-click the script in the list named "CornerEffects.jsx". You'll be presented with a list of options to control what type of corner; and at the bottom the pop-up menu controls which corners get that type of corner.
    (Names may vary somewhat for CS4.)

  • How to make only one column non reorderble

    I want to make only one column (Column 0) of my JTable non reorderble.
    I also want to make the same column non resizable and I want to give it a specific size.
    Please help me on this?

    I have implemented a RowHeaderTable class which displays 1, 2, 3, ... in the first column. The column is in the scrollpane's RowHeaderView, so it is not resizable nor reorderable. But its width can be set in your code. Maybe this is what you need.
    Use the class the same way you use a JTable, except 3 added methods:
    getScrollPane();
    setMinRows(int r);
    setRowHeaderWidth(int w);
    Note: The table works perfectly in skinless L&F, such as the default java L&F. It looks ugly in Liquid L&F because I don't know how to steal column header's UI to use on a JList. If someone can help me on this one, I thank you in advance.
    * RowHeaderTable.java
    * Created on 2005-3-21
    * Copyright (c) 2005 Jing Ding, All Rights Reserved.
    * Permission to use, copy, modify, and distribute this software
    * and its documentation for NON-COMMERCIAL purposes and without
    * fee is hereby granted provided that this copyright notice
    * appears in all copies.
    * JING DING MAKES NO REPRESENTATIONS OR WARRANTIES ABOUT THE
    * SUITABILITY OF THE SOFTWARE, EITHER EXPRESS OR IMPLIED, INCLUDING
    * BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY,
    * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. JING DING
    * SHALL NOT BE LIABLE FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT
    * OF USING, MODIFYING OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.
    import java.awt.BorderLayout;
    import java.awt.Component;
    import javax.swing.AbstractListModel;
    import javax.swing.JFrame;
    import javax.swing.JList;
    import javax.swing.JScrollPane;
    import javax.swing.JTable;
    import javax.swing.ListCellRenderer;
    import javax.swing.UIManager;
    import javax.swing.event.TableModelEvent;
    import javax.swing.event.TableModelListener;
    import javax.swing.table.DefaultTableModel;
    import javax.swing.table.JTableHeader;
    import javax.swing.table.TableCellRenderer;
    import javax.swing.table.TableColumn;
    import javax.swing.table.TableModel;
    * @author Jing Ding
    public class RowHeaderTable extends JTable {
      private int minRows = 10;                         // Minimum size of the row header.
      private static final int DEFAULT_WIDTH = 30;
      private JScrollPane jsp;
      // The row header is a JList with the same appearance as the column header.
      private JList rowHeader;
      // Repaint row header whenever the table inserts or deletes rows.
      private TableModelListener tmListener = new TableModelListener(){
        public void tableChanged(TableModelEvent e){
          if(e.getType() != TableModelEvent.UPDATE)
            rowHeader.repaint();
      /** Create a new instance of RowHeaderTable.
       * @param model
      public RowHeaderTable(TableModel model){
        setModel(model);
        initializeHeader();
        jsp = new JScrollPane(this);
        jsp.setRowHeaderView(rowHeader);
      private void initializeHeader(){
        rowHeader = new JList(new AbstractListModel(){
          public int getSize(){ return Math.max(getModel().getRowCount(), minRows); }
          public Object getElementAt(int index){ return "" + ++index; }
        setRowHeaderWidth(DEFAULT_WIDTH);
        rowHeader.setFixedCellHeight(getRowHeight());
        rowHeader.setCellRenderer(new TableRowHeaderRenderer());
      public void setRowHeaderWidth(int w){
        rowHeader.setFixedCellWidth(w);
      public void setMinRows(int m){ minRows = m; }
      public void setModel(TableModel model){
        super.setModel(model);
        model.addTableModelListener(tmListener);
      /**Use this method to get the scrollPane, instead of new JScrollPane(table).
       * @return
      public JScrollPane getScrollPane(){ return jsp; }
      protected class TableRowHeaderRenderer implements ListCellRenderer{
        TableCellRenderer colHeaderRenderer;
        public TableRowHeaderRenderer(){
          JTableHeader header = getTableHeader();
          TableColumn aColumn = header.getColumnModel().getColumn(0);
          colHeaderRenderer = aColumn.getHeaderRenderer();
          if(colHeaderRenderer == null)
            colHeaderRenderer = header.getDefaultRenderer();
        public Component getListCellRendererComponent(JList list, Object value,
            int index, boolean isSelected, boolean hasFocus){
          return colHeaderRenderer.getTableCellRendererComponent(
              RowHeaderTable.this, value, isSelected, hasFocus, -1, -1);
      public static void main(String[] args){
        try {
          UIManager.setLookAndFeel("com.birosoft.liquid.LiquidLookAndFeel");
        }catch (Exception e){ e.printStackTrace(); }
        String[] columnNames = {"First Name",
            "Last Name",
            "Sport",
            "# of Years",
            "Vegetarian"};
              Object[][] data = {
                   {"Mary", "Campione", "Snowboarding", new Integer(5), new Boolean(false)},
                   {"Alison", "Huml", "Rowing", new Integer(3), new Boolean(true)},
                   {"Kathy", "Walrath", "Knitting", new Integer(2), new Boolean(false)},
                   {"Sharon", "Zakhour", "Speed reading", new Integer(20), new Boolean(true)},
                   {"Philip", "Milne", "Pool", new Integer(10), new Boolean(false)}
        DefaultTableModel dtm = new DefaultTableModel(data, columnNames);
        RowHeaderTable rht = new RowHeaderTable(dtm);
        rht.setMinRows(0);
        JFrame frame = new JFrame("RowHeaderTable Demo");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.getContentPane().add(rht.getScrollPane(), BorderLayout.CENTER);
        frame.pack();
        frame.setVisible(true);
        dtm.addRow(new Object[]{"Mary", "Campione", "Snowboarding", new Integer(5), new Boolean(false)});
        dtm.addRow(new Object[]{"Mary", "Campione", "Snowboarding", new Integer(5), new Boolean(false)});
        dtm.addRow(new Object[]{"Mary", "Campione", "Snowboarding", new Integer(5), new Boolean(false)});
    }

  • Applying feathering to only one layer

    Hi,
    I'm created a two-part ad.  One of the two parts (on two different layers) has a background image that I would like only the center to show up and the rest I'd like to whiten (about 90% opacity, leaving 10% of the background image visible) using feathering, as described in Feather Selections In Photoshop With Quick Mask
    So, does anyone know how to apply such feathering on only one layer?
    Thanks!
    -Ron

    Create a Layer Mask and apply Feather in the Properties Panel.
    Could you please post a screenshot with the Layers Panel visible?

  • How can I edit separate layers in a psd file that was saved as only one layer?

    A designer provided me with a finished design and provided the psd, eps and ai files.  I'd like to make some minor changes in PS and would like to access individual layers - e.g. the text, background, etc.  When I open the psd file, however, it only has one layer.  how do I break out the original layers so that I can edit them?

    You can't. Once it's been flattened, you can't unflatten it. Talk to your designer: he/she will most likely have the unflattened version available.

  • Why does a my layered Illustrator file open with only one layer, when opened by someone else?

    I am using CS6, as is the other user.  When they open the file in Illustrator all the artwork is on one layer, even though the original file has numerous layers, and opens with these layers when I open it even now.
    I have never come across this problem before in all the years I have used Illustrator and have had no joy when trying to search for this problem.
    Any ideas or help would be greatly appreciated as it is confusing us!
    Thank you.

    Hi Mike, Wade & Larry,
    Thank you so much for your replies.
    Since I posted this issue, I was later informed that the other user is infact opening my files with CS5 and so a quick solution to this was saving it down to a previous version! Sorry for the confusion!
    This problem then becomes clear that it was a version error, but I have always had an error message come up if I try to open something that was created in a newer verion - is this no longer the case?
    I have been assured no pop up messages appear when opening the file which I find odd, and also that this layer compression has only just started happening even though many files have been back and forth previously.
    A little mystery! At least for now it is all working ok again
    Thank you all very much, greatly appreciated.

  • Using adjustment layers to only one layer

    I know how to use an adjustment layer - it goes directly over the layer I'm editing and I'm able to edit the colour (such as hue etc). The trouble is, anything below that adjustment layer then gets affected. Is there any way I am able to make this adjustment layer exclusive to a partuclar layer?
    Ideally then in that sitation I'd be able to have a bitmap layer using a vector mask (for example, a cut out tree) and then using an adjustment layer to change the colour of the tree.
    Hope I've explained it well enough, it's a bit confusing.
    Thanks.

    I'm new to CS5, but find that if I create an adjustment layer from the "Adjustments" window I automatically get the chain link icon in the layers window showing the two layers linked, then the adjustment only affects the layer below.   However, if you use Layer|New Adjustment Layer|Levels (for example) then you have the option to use previous layer as a clipping mask if you tick that box it is linked just to the previous layer, left unchecked it affects all layers below.

  • I want to make just one layer smaller

    I have two maps of same area (different years) and I want to match them up as one map.  I can load them both as layers and make the older map transparent so that I can see through to newer map, but older map is larger than the newer map (in the background).  I can move the transparent map but I cannot make just the transparent map smaller to fit over the other map.  I will also need to rotate the map slightly.  When I try to resize it changes both maps.  I have tried the transform and the move tool.  So how can I make one layer smaller and rotate it it leaving the other layer intact?

    We went over this yesterday:
    http://forums.adobe.com/thread/1184026?tstart=30
    Did it not work for you?

  • Only one layer slow

    in cs6, working in black and white, 800mb file when flat, 3gb with layers.  One layer only is super slow.   it's not the largest layer. it's just a small image fragment.  but when I try smudging in that layer, computer freezes up and start to move super slow.   I tried copy and paste image content into new layer without improvement.   Slowness started happening after I stretched the layer.   I have since opened and closed this document many times. restarted computer.  duplicated layer into new file doesn't improve the matter either. 

    samlarson wrote:
    UPDATE:   when I move this layer outside of the group it's in it moves at normal speed....
    We cross posted there.  I am not sure why being grouped would slow down a layer

  • How to make only one JFrame active at a time !!!

    Hy, I have created a JFrame and I have placed a
    JPanel in it. I also have a JButton "New" on the
    JPanel. When I click on the "New" Button, another JFrame
    appears. But I want ONLY one JFrame to be appeared
    at a time. That is when a JFrame appears on the JPanel,
    I should not be able to add another one.
    If it is not possible to do this with JFrame, then how to do
    it with a JDialog
    How to do this.
    thanks

    You can declare a boolean variable in your class and set it to true if you open a window. Next time when you click the NEW button, check whether that boolean value is true or false. If true then don't open a new window. Also when u close the frame window, set the boolean value to false.

  • How can I make only one user to be able to change a field

    I want only one user to be able to change material group for example.
    I want all other users when trying to change material, to see thie field - material group - display only.
    How can I do this?? What are the steps??
    Thank you

    Dear Theodoros,
    For the user to create/change material group:
    Go to transaction PFCG -> enter the role that you are using -> Select "authorizations" tab -> Edit Profile -> Here you will maintain activities for different authorization objects. Maintain Acticity "01" for material group authorization object.
    For the users to display material group:
    Go to transaction PFCG -> enter the role that you are using -> Select "authorizations" tab -> Edit Profile -> Here you will maintain activities for different authorization objects. Maintain Acticity "03" for material group authorization object.
    Authorization Object for Material Group: M_MATE_WGR
    Regards,
    Naveen

  • How to make only one row detail disclosed in uix:TableDetail

    I display row details to user with <uix:TableDetail>. I'd like to have only one detail displayed in the same time. When the page first loads, all details should be hidden, but whe user shows one another detail and one is already disclosed, only the new one should be displayed.
    I use <bc4juix:Table> and JDev 9.0.3.2
    Thanks in advance

    Viliam,
    The <table> element has the detailDisclosure complex attribute that you should use to control whether the details for table rows are disclosed. You should databind the detailDisclosure attribute to some DataObjectList that has the "disclosed" key set for each DataObject in the list. Then, when you disclose a new row, you should modify the DataObject for the corresponding row in the DataObjectLlist, and ensure that all other DataObjects set the "disclosed" key to false.
    Hope this helps,
    Ryan

Maybe you are looking for