Make Photoshop CS4 (normal) to Photoshop CS4 extended

Hi people,
I tried the whole day upgrading from Photoshop CS4 to Photoshop CS4 extended.
The situation is:
a few months ago, I had installed and activated Photoshop CS4 (normal) at a workstation.
Now we need at this Workstation Photoshop CS4 extended.
What have i done yet:
At first I uninstalled the normal Photoshop CS4, rebooted the workstation, and installed from the DVD Photoshop CS4 with an extended key.
After the installation has finished, and I started Photoshop CS4, I recognized that its not the extended Version, its just the normal one.
After googling the internet, I found the "WinCS5Cleanupscript".
So I have uninstalled the not extended Photoshop CS4 again,
did a reboot,
run the CleanUpScript (which does not recognize any CS4 on the workstation),
reboot again,
installed Photoshop CS4 with the key from the extended version,
reboot,
startet Photoshop CS4 and recognized also, that it was not extended.
Next step:
Ran the CleanUpScript, which found something from CS4 (what is ok, because I did not uninstall PSCS4 this time)
CleanUpScript cleaned some CS4 thins up.
Reboot.
Uninstall everything that begans with an "A" and ended with "dobe" from the workstation.
Reboot.
Than I ran RegCleaner, cleaned everything that began with an "A" and ended with "dobe".
Reboot.
Checked again with RegCleaner if anything was left, but RegCleaner did not recognize any more Adobe things.
Startet Photoshop CS4 and recognized also, that it was not extended.
What can/should I do, to be able to install Photoshop CS4 extended?
I have no more ideas.
regards Kai

Sorry if am not realy precise and correct enough, I try to explain it more exactly:
My Company has purchased Photoshop CS4 (normal) and Photoshop CS4 extended.
For both versions, do I have a separate key; one for the normal, and one for the extended version.
I have the Situation, with one workstation, that there is Photoshop CS4 (normal) installed and activated with a (normal) key, since a half year and it works propperly.
Now we need at this workstation Photoshop CS4 extended. But I can't "upgrade" my PhotoshopCS4 (normal) to Photoshop CS4 extended.
I know that the extended key works for the extended Version, because we also have workstations that needs PhotoshopCS4 extended since Photoshop was installed there.
My "upgrade"-way was:
- uninstalled, PhotoShop CS4 (normal) from this workstation
- Installed it again from the DVD
- entered the key from the extended Version
- waited half an hour, since the installation finished
- rebootet the workstation
- startet PhotoshopCS4 an then I recognized, that this is not the extended Version
- and now, I do not know, what I can do
Now after reading the other posts, there could be one mistake that I could had made.
And its, that I did not have deactivated PhotoShopCS4, but logicaly will it not be deactiveted during the uninstallation?
sorry if my english is too bad, if this is the case let me know, and I try to explain it more exactly.
regards and thanks
Kai

Similar Messages

  • How do you make a 3d octagon in photoshop cs4 extended?

    How do you make a 3d octagon in photoshop cs4 extended that you can map artwork to? I've been searched online for a solution that doesn't involve using a 3D program but can't find anything. Can't you extrude a shape like in Illustrator, or exporta true 3D shape from Illustrator that will work? I'd use Illustrator but the mapping thing is finicky, and doesn't alow wrapping images around angles. (now someones going to say: "Don't mention any other programs in a PHotoshop forum!" Yeah yeah, there should be a forum then about using different Adobe programs together.) End of rant, any suggestions much appreciated.
    Thanks,
    Mike

    Thanks for your prompt response!
    Suggested Bridge Update
    It turns out that I got a message that this update had already been installed, which led me to more carefully look at the Bridge window and (finally) see that the Output module had a Quality dropdown: Full, 300 ppi, 150 ppi, 96 ppi and 72 ppi.  Thanks!  I decided to compare the CS4/Bridge results to those I got in CS2 with its convenient File/Automate/PDF Presentation/Multi-Page Document routine that I like.
    My project was an 8-page PDF made from scanned pages of handwritten notes into which some fairly small type had been insert using the Photoshop CS2 Type tool.  In Photoshop CS2, I had settled on "medium quality" JPEG compression as giving a "reasonable" file size (about 7 MB) and "very good/excellent" image quality.  I experimented with making the PDF in Bridge, using all five Quality levels.  See table below.  The Bridge "good minus" file was about the same size as the file produced in CS2, which I judged to be "very good/excellent" and slightly better visually than the 300-ppi, 23.5-MB Bridge file.
    Bridge Quality:
    Full
    300 ppi
    150 ppi
    96 ppi
    72 ppi
    File Size:
    25.2 MB
    23.5 MB
    7.6 MB
    3.2 MB
    2.1 MB
    Subjective Quality:
    Very good
    Very good
    Good minus
    Poor
    Useless
    I appreciate that you may not be all that interested in these observations, but it seems to me that Adobe has done us no favors in the multi-page PDF department in going from CS2 to CS4!
    Install the Old Contact Sheet/Picture Package Plug-Ins
    I had already done this some time ago, in order to get in CS4 the File/Automate/Contact Sheet II feature I liked in CS2.  It does not appear to me that this plug-in has anything to do with make multi-page PDF's.  Perhaps I'm missing something.
    Again, thanks for your response!

  • How do you get Premiere Pro CS4 frames into Photoshop

    Hi I am trying to modify a series of Premiere Pro Frames by coloring a small section of them in Photoshop 7. How do I pull those frames out of my timeline, get them into Photoshop, and then back into my timeline? I remember doing it with Premiere 6.5, but I can't figure out how to do it with CS4.

    Thanks guys, I'll take it from there.
    Terry Lee Martin
    Date: Wed, 2 Sep 2009 17:15:26 -0600
    From: [email protected]
    To: [email protected]
    Subject: How do you get Premiere Pro CS4 frames into Photoshop
    Yes, PS-Extended will make things a bit easier. While not perfect, it simplifies rotoscoping quite a bit.
    Good luck,
    Hunt
    >

  • I have a Mac computer and am trying to use a Photoshop CS4 program, but after accessing my desktop files through Adobe Bridge and clicking twice on any of the pictures to get into Photoshop,  instead of entering photoshop I get an enlarged version of the

    I have a Mac computer and am trying to use a Photoshop CS4 program, but after accessing my desktop files through Adobe Bridge and clicking twice on any of the pictures to get into Photoshop, instead of entering photoshop, I get on the lefthand side an enlarged version of the picture with red, yellow and green buttons on top. Any suggestions on what is wrong, or what can be corrected ?

    And there is the problem. Your pictures are opening up in Mac's own Preview app.
    Do you want all your jpegs to open in Photoshop, or only when you are in Bridge?
    Selecting a program to open a certain file is called: File Type Association.
    You can choose this at the MacOS level or the Bridge level.
    Here's how to do both:
    Either MacOS or Bridge has the wrong app associated with the jpeg. Let's start with MacOS
    Close Bridge and Preview. Select one of your jpegs, and press Cmd i, That will bring up the file info window.
    Go down to the "Open with" section of File Info.
    Choose Photoshop CS4 and click on the Change All... button to apply this choice to every jpeg on your Mac.
    Then open Bridge and see if double-clicking opens it in Photoshop.
    Now that means all jpegs on your Mac will open in Photoshop.  Maybe you don't want that.
    You can set your jpegs to open in Preview when Bridge is closed.
    When you open Bridge, there is Preferences > File Type Associations where you can direct Bridge to open the jpegs in Photoshop when you are viewing in Bridge.

  • Adove photoshop cs6(normal) vs Adobe Photoshop CS6 Extended Student And Teacher Edition

    hi guys,
    i would like to know what is the difference between Adove photoshop cs6(normal) and  Adobe Photoshop CS6 Extended Student And Teacher Edition wich is available for around 120 to 165 $ on online shops.

    The educational package is the same.
    Extended has 3D capibility.  Will not work with Windows XP or video card with less than 512 meg of VRAM.

  • Bridge CS4 Cannot launch Photoshop

    When opening an image from Bridge, I get the Photoshop splash screen, then "Photoshop has stopped working. Windows is checking for a solution to the problem." (If Photoshop is already running, I have no problem.) This also occurs if I attempt to open an image with Photoshop from Windows Explorer. Also, while the icon on the Windows Start Menu launches Photoshop successfully, the shortcut placed on the desktop when CS4 Creative Suite was installed also had the above problem. This would indicate the problem was created at installation.
    I suspect there is a problem with the path, but I can't figure out how to fix it. Would like a global fix rather than having to change paths for every file extension pointing to PS CS4.
    (Windows 7)
    Your thoughts?

    All the applications are checked there. However, when you click on the button to "Reveal Scripts" it takes me to an empty folder. Sounds like a problem, BUT....
    I checked with someone else and their folder shows empty too, plus my Illustrator launches properly. (BTW, this is not in a corporate environment, just a personal copy on a personal computer.)
    I sure appreciate your suggestions, though. Keep 'em coming!

  • Can't use CS4 to edit --Photoshop CS4 crashes after installing Aperture 3.1

    Hello: Whenever I try to launch Photoshop CS4 as my external editor, it will crash while trying to open the image. I never had this problem before installing the Aperture 3.1. update. CS5 seems to be okay though.
    Whenever I select an image in Aperture and select edit with Photoshop CS4, it will launch CS4 and then hang---never opening the image.
    (I am using Photoshop CS4 for most of my work as many of my plug-ins have not been updated yet)

    ...my work as many of my plug-ins have not been updated yet...
    Since I do not know what kind of plug-ins you are working with, if you tell us what are you working with the specific plug-ins. So I cannot tell you, but I do know that some other plug-ins software developers such as Nik Software and onOne Software recently updated their plug-ins from 32-bit to 64-bit plugins. However, I do not know what you are working with.
    Also, when you are running Ps CS5, are you aware that you can switch back and forth between 32-bit and 64-bit workflow in Info panel. If you need to run 32-bit plugins in Ps CS5, you can always set it to 32-bit. When you are done working with that, you can set it back to 64-bit.

  • Cannot open Photoshop CS4 files using Photoshop 7

    Hi - I would be very grateful if anyone has solved this problem before and can help me.
    I am trying to send a smallish (5 Mb) layered CMYK Photoshop file from my version (CS4) to someone who is still using Photoshop 7 but they are completely unable to open it. I have saved it using 'Maximize Compatibility' and there are just 3 layers, no fancy layer effects, no layer sets, and each layer has a transparent background. Every time the other person tries to open it (via File -> Open), their Photoshop hangs and they have to force quit. It will open in Graphic Converter but it is then saved as a flattened image which is no good. I'm at my wits' end what to do to get this to open in PS7 - does anyone have any ideas?
    I am using Photoshop CS4 on a Mac Pro, OS X 10.6.3; they are using Photoshop 7 on a G4 867 DP, OS X 10.4.11.
    Thanks very much -
    Deb.

    If anyone else should come across this sort of problem, here's the scoop:
    It's a metadata parsing bug in Photoshop 7 and CS/8 (version 3-6 no problem, version 9-12 no problem).  It is caused by the history metadata in the file, possibly because of the length of the history, possibly because of the InDesign history bits.  I don't have a MacOS 10.1 system avaialble to debug Photoshop 7 any more, so I can't be positive about the exact cause.  But we know that Photoshop CS2 and later work just fine.
    If you wait 30 minutes, Photoshop 7 does eventually load the file.  But that hurts productivity.
    The history metadata can't easily be deleted in Photoshop (or ImageReady, Fireworks, etc.).  But if you copy the layers to a new document, the history metadata won't be carried over.  Save the copy, and that copy will work just fine in Photoshop 7 and CS/8.

  • [VB CS4] CreateObject with Photoshop 64 bit possible?

    Hi,
    I wrote a VB6 application for a customer some years ago, which is using Photoshop for some imaging stuff.
    The thing is that the customer has now installed the 64 bit version of Photoshop CS4, and she gets the well known error nr 429, ActiveX component can't create object, trying to run the program.
    The error is most likely to ocurr on the line trying to initiate Photoshop:
    Set appRef = CreateObject("Photoshop.Application")
    The appRef object variable is declared as this:
    Private appRef As Photoshop.Application
    And in References for the project, I'm pointing towards the "Adobe Photoshop CS4 Object Library".
    Is there another name for creating the application for the 64 bit version, using late binding in the same manner as for the 32 bit version?
    Best regards,
    Andreas
    Message was edited by: Andreas Jansson

    Hi!
    Sorry for not answering sooner!
    Well, it seems I had to rewrite the application in Visual Studio C#.
    (Looking in the code) I used this declaration for the application object (Photoshop):
    private dynamic appRef;
    and this code to set it to an instance of Photoshop:
    appRef = Activator.CreateInstance(Type.GetTypeFromProgID("Photoshop.Application"));
    Documents are opened like this:
    docRef = appRef.Open(FullFilePath, null, null);
    Best regards,
    Andreas

  • Cannot install Photoshop CS6 ugrade to Photoshop CS4 on Windows 7 PC.

    I cannot install Photoshop CS6 upgrade to Photoshop CS4 on my Windows 7 PC. Error reads - Serial Number you provided is valid, but a qualifing product could not be found on this computer. I then selected CS$ as the product and entered the serial number with Error - This serial number is not for a qualifying product. CS4 is currently running on the PC. Any advise?

    If you recently purchased CS6 as an upgrade then the versions that qualify for the upgrade were reduced a couple years ago to only include CS5 and CS5.5.  If you purchased CS6 a couple years ago while CS4 was still in the upgrade path then you should contact Adobe support using chat and see if they can help you get thru the activation.
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • Ok.  I hope someone can answer my question.  I am new to photoshop.  I need version cs4 in order to work with a designer and printer on some logo work. I've tried to download it but it just gives me individual files with no installer and nothing - includi

    ok.  I hope someone can answer my question.  I am new to photoshop.  I need version cs4 in order to work with a designer and printer on some logo work. I've tried to download it but it just gives me individual files with no installer and nothing - including the adobe "instructions" seems to work.  How can i get this software in a downloadable format? is it actually free - I'm assuming it is...  Hope someone knows the answer to these questions...

    The download itself is free and is valid for 30 days only.  After that, the software ceases to work.
    CS4 is pretty old, no longer sold and no longer supported by Adobe.  It's also not compatible with many modern OSes.
    Why do you have to work with such an obsolete version of Photoshop?
    What kind of "designer" uses it?

  • I've recently downloaded CS4 ( Illus. Photoshop, and Indesign) on my Mac Book pro. Only these apps appear as low resolution. All other imagery, text etc... appear fine on my system. How can I correct the pixelization of the Adobe products?

    I've recently downloaded CS4 ( Illus. Photoshop, and Indesign) on my Mac Book pro. Only these apps appear as low resolution. All other imagery, text etc... appear fine on my system. How can I correct the pixelization of the Adobe products?

    No. If you want full compatibility with that display for all Adobe apps you’ll need to move to Creative Cloud.

  • Uninstall Photoshop CS3 after Upgrading to CS4?

    I am a late up-grader to Photoshop CS4 (new camera) and I would like to reclaim the gigabyte of space occupied by CS3 and associated files. Is it safe to simply use the uninstaller for CS3? Thanks for the help!
    Jeff

    I just did exactly, that.  I installed Photoshop CS4, actually, the entire CS4 master Suite.  Then a few weeks after having used CS4 without any glitches I went through and deleted anything related to CS3 in all the various preferences and Application Support folders and it has been working great since.
    I did have some droplets, plug-ins and other items from CS3 that I still needed to use in CS4 so I moved them from the old CS3 folder to the corresponding new CS4 folder. Everything worker very easily and without any problems whatsoever..
    I think it would be very safe to use the uninstaller for CS3.  However, be aware that if you have an upgrade version of CS4, it will upgrade the existing CS3 and will not be able to do so if it is uninstalled.  I was working with a new full version so that was not an issue.  Sometimes you can simply put in the old CS3 serial number in order to verify ownership and sometimes you need the actual app on the HD for the upgrade.  It would be advisable to check with Adobe on this.  Or just install CS4 and then after it is verified as working, go through and delete all CS3 related files as I did.

  • How to make font bigger than 1296pt. in cs4????

    hello, ok i  am editing this to make it easier i hope. question why cant i make font bigger than 1296pt. in cs4. my template is 24"x150" for some vinyl i want to cut. cs4 wont let me transform type that big...so how can i accomplish that. i created what i needed in photoshop and reopened in cs4 that worked but now i cant get it to create outlines. what am i doing wrong or not doing at all??? thanks for all the help in advance -nick 

    You could set your type in Illustrator, convert it to outlines and scale it.
    If you want to keep it editable as long as possible, apply a transform effect and scale it that way

  • How to make a live curve in photoshop.

    Hi everyone, I just posted a video on youtube showing how to make a live curve. You can check it out here How to make a Live Curve in Photoshop - YouTube
    I'm very curious about your opinions:)

    Thanks for your reply. Could you please walk me through it from the start  (I am new to this color chanel stuff). I need to add green text to a flyer. Do I make the spot chanel first, then add the PMS color text? What mode should it be as it cannot be CMYK?
    Many thanks

Maybe you are looking for